Replaying to mail with same received address

Hi
I have many mail addresses in OS X Mail App thing is I want to replay to each mail received with same account it was sent to
now if I click replay and mail is sent to mymail2 as an example my mail message will default sending with mymail1 account which
I made as default account for new messages how to fix this so when I click replay it will default sending by mymail2 account ?
Kindest Regards

Hello,
I also had the same requirement and I too used adapter module.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81?quicklink=index&overridelayout=true. THis link will help you to create the module and implement in XI.
Implement the code which Stefan provided in the above link.
Regards,
Tiny Mampilly
Edited by: TINY MAMPILLY on Jul 5, 2010 1:29 PM

Similar Messages

Once completed the form, is it possible to receive the confirmation e-mail with a link addressing to a html archive?

Once completed the form, is it possible to receive the confirmation e-mail with a link addressing to a html archive?

I don't know if it is the best solution but you could filter the results to just that client's answers on the summary tab and then PDF that.

Mail in Mavericks not replacing existing mail with same name

Mail in Mavericks not replacing existing mail with same name.
Thanks

I have the same situation as you - sending out pdfs of designed pages and wanting to overwrite them continually. It used to happen on an older version of Mail, then it disappeared and now it's back with the latest version.
It's more than annoying, it's downright driving me nuts. In the last hour I had to quit Mail seven times.
Please send a fix for this Apple.

Multiple sites ASA's connected to Cable modems with same DHCP address

I have several locations with an ASA 5505 installed behind a cable modem. The cable modem is issuing DHCP for the same network address range in these locations. I have the outside interface obtaining DHCP from the cable moden network and the asa's are receiving the same outside address. I have the remotes set to use EZVPN to create the VPN tunnel back to the head end ASA 5540. I am seeing constant rekeying for phase 2 for those remote sites. is there any thing I can do short of assigning each asa a unique outside address?

Dave
The Linksys doing NAT is the reason why the ASA sees all the traffic as having source address as 192.168.2.1. The only way for the ASA to see the original 192.168.1.x address is to change the Linksys to not do NAT.
One thing that I notice is that there is not a route statement in what you posted for the 192.168.1.0 network. It is not clear whether the route does exist and you did not post it or whether the route does not exist. But if it does not exist it would certainly be a reason why you lose Internet connectivity when you change the Linksys to not perform NAT. (the ASA would have no knowledge of how to forward to the network and would drop all the traffic). Try adding the route to the ASA and changing the Linksys to not perform NAT and let us know if it works.
HTH
Rick

Two accounts with same email address: TROUBLE!

In experimenting with accounts (to solve a problem involving connecting to different ISPs at different times), I wound up creating a second account with the same email address as my regular one. These were POP accounts. When I realized that wouldn't help me, I deleted the second account. To my surprise, Mail deleted all of my inbox, sent mail and trashed mail. It still showed many, many mails (in those places) with the indication "you must reconnect to the server", but in fact I rebuilt the mailboxes and the mails were truly gone. I think Mail shouldn't have permitted the second account to be created in that way. Loss of mail is pretty serious, and there was no indication to me that I was doing anything wrong. I hope this is fixed in the next version.

I don't know a workaround for that other than to use a different address for the calendar share.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Multiple interfaces with same IP address?

Can anyone suggest how to configure multiple (logical or physical) interfaces with the same IP address?
There is a teaser in the solaris 8 man page for 'route' that suggests this is possible:
"In a change or add command where the destination and gateway are not sufficient to specify the route (for example, , when several interfaces have the same address), the -ifp or -ifa modifiers may be used to determine the interface or interface address."
I can find no other reference to -ifp or -ifa, and at the moment I cannot seem to bring up two interfaces (logical or physical) with the same ip address.
I realise this is an obscure config. Anyone intimately familiar with route of ifconfig?
AJB

Yes. I could have laid odds that this would be the first response :-)
I know it is unusual, and I am aware of the inherent issues with doing something like this. I have read the multipathing guide, but it wasn't that helpful, because I want the same IP address, not just the same subnet. It is NOT for load balancing, or failover support. I'm afraid I can't give too much detail at the moment because of the nature of research project. What I will add is that I want to do this on an 802.1q enabled NIC, on the same physical port, with different logical interfaces for each VLAN having the SAME IP address.
We can already do this on Linux, and as I said in the original post, the route man page suggests that it can probably be done on Solaris. What I really need to know is how?
Any takers?
AJB

Multiple accounts with same email address

Hello,
We are working on a system where we need a blackberry to access an email account, for example [email protected] - in this case its a POP account. However we are also using a google apps for business account for calendaring where the login is [email protected] We can't add two accounts, one email and one google with the same email address. Is there anyway around this?

I don't know a workaround for that other than to use a different address for the calendar share.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Multiple Basestations with same IP address

I currently have 4 apple airport basestations, all of which are extending the same wireless network. this setup seems to work fine, however, all of these basestations show up with the same Ip address. I set the first one up statically with the ip of 192.168.2.6 and then each device after that I had it copy the settings from the first. Each time it did so, each device showed up with that same address inside of the airport utility. If I ping 192.168.2.6, i get a response, but which device is responding? Is this what's supposed to happen when using these devices in extend mode?

Strange, Going through each device with a the setup wizard, at no point did it ask for a different IP. The original base station was set up with a static IP, i would think it should ask me for a new, different IP, since I has specified that I was adding a device.
Either way, I set a separate IP for each device and now it seems to be just the same as before...but with more IP's!

Send mail with no sender address using Javamail

I'm trying to send emails using javamail, it works fine but I would like to send emails with no sender address. When I don't set :
message.setFrom(new InternetAddress("[email protected]"));
or do just
message.setFrom()
I get my_user_name@my_machine_name as the sender address when i recieve the email.
I understand the security problems about sending emails without sender but i need to automate the sending of confirmation messages that recievers can't answer to.
Quentin.

I get a lot of e-mail newsletters that say at the bottom "Please do not reply to this, nobody will read your reply". What's wrong with that? Set up an address and automatically purge any messages sent to it on a regular basis.
Or if you want a different way to annoy people, use an address that doesn't exist on your server. Then people get a bounce message when they reply to it.
You might also want to evaluate commonly-used spam filters and see if they filter out messages that don't have from-addresses. No point sending people messages if they get filtered out.

Send 837, 276 & 270 to same Trading Partner with Same Receiver and Submitter ID

Hi,
I am trying to send different EDI to same Trading partners using same Receiver and Submitter Identifiers, but for different ISA15 and GS8.
When I tried to add another Agreement using same identifiers, BizTalk throws errors
Cannot save changes as it will result in two oneway agreements in agreements [Agreement_837] and [Agreement_276] to have same sender and receiver identities [ZZ:SenderID] [ZZ:ReceiverID]. (Microsoft.BizTalk.B2B.PartnerManagement)
I thought of using dummy ID and change it in Send Pipeline component with same Submitter and Receiver ID. But seems its a BAD idea. Is there anything I missed ?
Any suggestions / help is highly appreciated. Please help
Thanks,
harry
BizTalk Developer

You should be able to set GS08 on the Envelopers section of the You->Them tab of the agreement. You can set per transaction.
Unfortunately, ISA 15 is an Agreement level option and as you've seen, a unique sender/receiver combination is required.
I recommend setting EdiOverride.ISA15 in either an Orchestration or Pipeline Component for the transactions you want different from the Agreement ('T' I'd presume).
EdiOverride:
http://msdn.microsoft.com/en-us/library/dd223988.aspx

How do I set up another Apple ID with same email address so that my daughter can use game center with her own account?

We have two Ipods and an Iphone. We usually just use my Apple ID for everything on each device. However, when downloading games to the game center, we have to use my Apple Id and then it automatically sets up my game center username on my daughter's Ipod. But she wants to play some of the same games that I do but she can't because my username keeps coming up.
How do I add another Apple ID to the same email address or create another user id for the game center?
Thanks!

I don't believe you can do that; here is some info:
http://support.apple.com/kb/HE68
(click on the more Apple ID support at the bottom)

Forgotton second Apple ID with same email address

My email address is linked to multiple Apple IDs but i dont remember the details of the second one, what shall i do? I cannot use my first Apple ID. The one im using now is new one with new email address where i have no contacts.

I don't believe you can do that; here is some info:
http://support.apple.com/kb/HE68
(click on the more Apple ID support at the bottom)

How to handle a Customer Plants with same Physical Address

We have customers that have multiple plants in the same physical address. I need to be able to ship to the physical address but in va03 I also need to tell which lines are for which plant. So my question is how is best to handle this?
Here are the options I can think of.
1) Each customer plant will be its own ship to even though they would be the same physical address and contact information.
2) Create a Partner that will hold each plant that will be attached to the ship to. This would work similar to Manufacture and Manufacture Plant in Purchasing. Then this customer plant partner would be attached to the sales order line in addition to ship to.
3) Use Option 2 but figure out what SAP standard partner for customer plant is.
Does anybody have better ideas?
Which one is the most appropriate to do?
Matthew

Hi
You can map them as different Unloading points and enter the details in the Customer master unloading points details. When the slaes order is created, a pop screen will show you the different unloading points to chose one among them. This should solve your issue.
Thanks,
Ravi

I want to authorize a second computer with same email address ?

I want to authorize this computer but adobe says a previous computer is registered with this email address and is not allowed.
Can I cancel the earlier authorization or is there another way I can have adobe

Billscott which specific Adobe software or service is your inquiry in relation too? Please see Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html for more information regarding activation.

Can't Send Mail with Same Outgoing Server

I have 2 Roadrunner accounts that use the same outgoing smtp server. In order for me to send email (receiving POP email is not a problem), I have to set the outgoing server for port 25, no SSL and no authentication. I can get one of the accounts to work. But, when I try to set up the 2nd roadrunner account with the same settings on the same outgoing server, I get an error from OSX mail telling me the following:
"Could not save the changes
The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
Can someone help me figure out how to get around this? I'd really like to send mail from my accounts.
Thanks!

Venom51 wrote:
I have 2 Roadrunner accounts that use the same outgoing smtp server. In order for me to send email (receiving POP email is not a problem), I have to set the outgoing server for port 25, no SSL and no authentication. I can get one of the accounts to work. But, when I try to set up the 2nd roadrunner account with the same settings on the same outgoing server, I get an error from OSX mail telling me the following:
"Could not save the changes
The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
Welcome to Apple's discussion groups.
Perhaps I'm missing something, but can't you have both accounts use the same SMTP server? If you're still trying to create the second account using the account creation wizard, I'd try giving it dummy SMTP information, then change it to use the real SMTP server once the account is created.

Replaying to mail with same received address

Similar Messages

Maybe you are looking for