Replaying video via HDMI problem N8

If I record a video on my N8, then replay it through my TV via HDMI, the video starts OK, then stutters after maybe 30 seconds and then a message pops up quickly (too quick for me to read) and then the video stops replaying and the phone goes back to the home screen.
I have no idea what is causing it, has anyone else had this or knows of what is causing it?
thanks

bluegnu wrote:
If I record a video on my N8, then replay it through my TV via HDMI, the video starts OK, then stutters after maybe 30 seconds and then a message pops up quickly (too quick for me to read) and then the video stops replaying and the phone goes back to the home screen.
I have no idea what is causing it, has anyone else had this or knows of what is causing it?
thanks
 Does the same video play normally on the phone without connecting to a TV? Also, is the video stored on E: mass memory  drive or F: Memory card? If it's on a memory card, the card may be faulty and might need to be re-formatted. Backup any important files on the SD card then use the phone to re-format the SD card.
Cheers
Ray 

Similar Messages

  • Audio & video via HDMI to an external monitor with lid closed.

    I would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen.
    I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI. Any ideas?

    Seems like there may be two separate questions here.   Audio working in either configuration   and video from HDMI when lid closed.  First, you are doing this with the Mac running off of AC, not battery, right?
    Audio:
    Is the HCMI cable you are using able to carry the audio?  Some cables don't.
    The only way I've ever used external displays with lid closed is with the thunder port (or DVI) adapter, not with the HDMI.  I see the specs from Apple:
    HDMI video output
    Support for 1080p resolution at up to 60Hz
    Support for 3840-by-2160 resolution at 30Hz
    Support for 4096-by-2160 resolution at 24Hz
    So have you tried varying the screen res to determine the results?  I can find no specs regarding what ports remain operational in clamshell.   Like you, I would have assumed all of them.
    I suspect only the thunderbolt port would support your desired config -- try a thunderbolt/hdmi adapter.
    Finally, clamshell mode doesn't allow the MBP to cool efficiently.  Heat kills electronics, so if it's too warm or the fans really kick in, you might want to reconsider this setup.

  • Full HD video via HDMI. Can Satellite A300D-14P do this?

    Hello,
    I'm thinking of buying Satellite A300D-14P with Athlon X2 Dual-Core QL-60 and Radeon Mobility HD 3200 256mb.
    Does anybody know if it can deliver full hd (1080i or p) video via its HDMI?
    If owners of the subject exist on this forum, may I ask them humbly to try to run any full hd content (preferably h.256)?
    Thanks
    A

    The questions is resolved. GPU takes care of HD decoding according to http://www.notebookcheck.net/ATI-Radeon-HD-3200.9591.0.html
    In this case it has nothing to do with CPU. Though I did not get you comment that movies stored on HDD are not of real HD quality. I m now having a couple of 1440x1080p clips on my another laptop and they are of real HD quality, though I cant watch them on notebook LCD screen in real qiality because of low lcd matrix resolution.

  • No Video via HDMI or screen share from MacMini

    Hello,
    I've had the following setup for over a year now without any problems:
    MacMini <HDMI> Denon X2000 AVR
    Sony Blue-ray <HDMI> Denon X2000 AVR <HDMI> Sony 55" TV
    Cable Box <HDMI> Denon X2000 AVR
    Since I don't have a keyboard or mouse for my mini I've setup "Screen Sharing" so I can login from my MacBook and control it as needed.
    Everything was fine until a few days ago, I switched inputs from my Cable box over to the Mini and there was no video. I tried "login in" to my mini via my MacBook and I can't see the desktop, it's just a black box. I can however see the 3TB USB 3.0 drive that i have attached to my mini and have access to all my files.
    So to recap my Mini starts up, power light comes on, makes the startup sound but I get no video on my TV or in "Screen Share" from my MacBook. I do however have access to my files on my Mini via my MacBook.
    Has anyone had this situation before? I've checked all the HDMI cables by taking the one from my Cable box that is working and plugging it into the Mini to no avail. I've also restarted the mini multiple times.

    I've got a 2011 Mac mini.
    Since I don't have a keyboard or mouse for my mini I've setup "Screen Sharing" so I can login from my MacBook and control it as needed.
    Same here! I've been using Screen Sharing to use this mac mini since I purchased it in 2011. I've never had a monitor hooked up to it.
    Everything was fine until a few days ago, I switched inputs from my Cable box over to the Mini and there was no video. I tried "login in" to my mini via my MacBook and I can't see the desktop, it's just a black box. I can however see the 3TB USB 3.0 drive that i have attached to my mini and have access to all my files.
    A few days ago I connected my 41" Samsung TV to the mac mini using an HDMI cable. Since doing so, I can still connect to the mac mini and browse the mac mini's file system in Finder (Desktop, Applications, Documents, Movies, Music, etc...) but when I click Share Screen... with that mac mini via the Finder (as I've successfully done for years) it just hangs, and eventually I get the message "Connection failed to mac mini... Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure your network connection is working properly."
    So to recap, the only thing at all that's changed on that mac mini was plugging in the HDMI cable to the television. And now I cannot use Share Screen with it.
    For what it's worth, I did hard reboot the mac mini and was able to successfully Share Screen. But after going away for most of the day and coming back, now that I try to Share Screen I again get the error message I pasted above.
    Any help would be really appreciated. I don't want to have to reboot my mac mini just to Share Screen for a couple hours every time I want to use it.
    Edited to add: while I can't Share Screen to that mac mini any more since plugging it in to the tv with the HDMI cable, for what it's worth I can still control iTunes using the Remote app for iOS. I doubt that's too relevant but adding it here just in case.

  • No Video Via HDMI With Denon Receiver

    I just purchased a Denon 2307 receiver and I am attempting to use my MacBook as my DVD player. I purchased a DVI-HDMI cable and plugged my MacBook directly into the receiver. An Optoma HD70 projector is connected to the HDMI out connection on the receiver. However, I get no video and the receiver just clicks while it searches for something connected to the HDMI2 connection. Audio works via an optical cable, however.
    If I connect my MacBook directly to the projector I get video. Either way, the MacBook System Preferences recognizes a 2nd monitor, either DENON-AV or OPTOMAHD70. So, I know it is not the cable. I also know it is not the HDMI2 connection because I tried HDMI1 as well. Normally, I have an HD TiVo connected to HDMI1.
    Searching the forums and performing random Google searches has yielded nothing except one vaugue reference to a lack of HDCP on the MacBook. I currently don't have any other adpaters/cables to test this theory, i.e. vga-component... which I am unsure would work anyway.
    On the AVSForums, someone with an intel Mac mini and a Denon 2807 receiver got them to work together. Yes, they are different models, but I mention it because they are of the same most recent generation.
    Will this setup ever work?
    Thanks in advance for any help.

    As a side note, I tested my setup with a different receiver, a Denon 4306 model, and I was able to display video. What could be specific to the 2307 model that would prevent me from displaying video?

  • HT201177 How can I resolve the HDCP issues when playing 1080p video via HDMI to my HDTV?

    Palying back any video (iTunes 1080p purchase, Netflix) via the HDMI port results in screen issues on my HDTV. FLickering, odd noises, etc. I did get a HDCP warning but my TV is HDCP compliant. Any ideas? Thanks.

    Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
    Not that I could find.
    The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
    Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Apple TV keeps requiring full reset to output video via HDMI after update..

    Never had this problem until after iphone 2 and latest itunes/itv update, but now I have to do a full reset of my Apple TV in order to get video output to work again. Once done, it works fine until I switch to another source and back again, then it again requires this reset. Again, I had never had the problem before the last update with the exact same equipment...
    SIAP, but I didn't see anything else listed with the same problems...

    I reply to myself, as I found a (however inconvenient) workaround. I have a Samsung LCD, I don't know about you logicguru. Say the Apple TV's HDMI source is HDMI1 and your cable whatever is on HDMI2. So I watch Apple TV on HDMI1, then flip over to another source. Now regularly one would keep pressing source to get back to HDMI1 to get back to Apple TV. Instead, I wait a couple of seconds, hit Menu on the Remote, select the Connections or whatever option at the bottom, go to Source there, and select HDMI1 there. Also, it only works when the Apple TV is in screensaver mode (I have the photo collection scrolling at this time). If I do the way detailed above, there's no problem going back to the white box. I think this can almost be considered as voodoo.

  • Macbook Pro to HDTV via HDMI no audio with video

    So I plugged in my MBP to my tv via HDMI this weekend and for some reason I was getting no audio when trying to watch a video online. I tried multiple websites to see if that was the issue, but nothing seemed to work. I was using Chrome but didn't try any other browsers. The video played but I would get no audio through my tv. The kicker was that when I played a song from iTunes, the audio would work just fine through the tv. Has anyone ran into this problem?

    Morning kirstenpolley,
    Thanks for using Apple Support Communities.
    If you know the hdmi cable is good.
    You may want to try a different input channel or a different display adapter.
    For more information on this, take a look at this article:
    OS X Lion: Use a television as a display
    http://support.apple.com/kb/PH3776
    Best of luck,
    Mario

  • Only Video No Sound on TV via HDMI

    I have two relative new notebooks, HP15-R063NR and HP15-f039wm. Both are Windows 8.1
    I tried the two notebooks using the same HDMI cable and the same TV. The HP15-R063NR works normally, but the HP15-f039wm has no sound on the TV (only video no audio).
    I checked the Sound playback when connecting to TV via HDMI. The HP15-R063NR has the icon of 247HD-T11 Intel® Display Audio, but the HP15-f039wm doesn’t have the icon.
    I checked C:\windows\system32\drivers. Both laptops have the same drivers: drmk.sys, IntcDAud.sys, Ksthunk.sys and Protcls.sys with the same dates installed
    3.I checked both laptops for Troubleshooting – Hardware & Sound-Troubleshoot Audio Playback-Playing Audio, both laptops were “Troubleshooting couldn’t identify the problem”.
    Question:  Two HP laptops with the same drivers, using the same HDMI cable and the same TV, no problem through Troubleshooting. Why one has good audio the other doesn’t . How to fix it?

    Hi @31danny 
    I understand that one of your notebooks is not playing sound using HDMI, using all the same hardware. Also that you have performed some of the standard checks. I am happy to assist with this.
    As to why the one is working and the other is not, is impossible to say yet. Like any complex device, there are small variations between the components, and in some cases that can result in differences between how one performs versus the other. So no two pieces of hardware will be exactly the same.
    Anyway, I would recommend you check through this page and since you have already done many of the things within, I would look to the options further down, and start with the hard reset:
    Troubleshooting HDMI Display and Sound Issues
    Let me know if those steps help at all, and if not, any other information you can provide.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Video chat on PlayBook (7 inch LCD + Citrix session via HDMI.

    Can the Playbook Technically. Have an extended desktop I.e. Video chat on the Playbook Screen, whilst having an different output e.g. a citrix session on a monitor connected via HDMI?
    Or is only clone mode supported?

    it can do 2 things but I have no tried this scenario out as I dont have citrix
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

  • I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    tyler57,
    it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

  • How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

    How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

    About Mini DisplayPort to HDMI adapters
    Stefan

  • Is there a way to play video through HDMI and have the audio via the headphone socket?

    I would like to be able to play movies through the HDMI adapter to a projector, but to have the audio via the headphone socket to a separate audio system.  What I find is that as soon as I connect the projector via HDMI, the audio via the headphone sockeet is cut off.  Any ideas?

    Yes, there is a very simple way to get audio out through the iPad headphone jack even while connected to HDMI to play movies on a projector or TV.  In fact, I just did it last night for a presentation.
    With the HDMI adapter connected to the projector and your audio jack plugged into your iPad headphone jack, go ahead and start the movie. Then simply unplug the headphone jack and plug it back in.  The audio is now routed through the headphone jack again.
    I found I only had to do this once per session.  That is, Iwas able to stop the movie, go to the beginning of my presentation, wait the 20 minutes for the meeting to begin, and when I got to the video clip the audio still played out through the headphone jack to the PA system.
    I had built a presentation in a Web oriented training tool and it was running on Safari iOS7 with the latest update.  I have not tried it with Keynote yet.
    iPad mini (original version)

  • Gx630 and problem with dvd playback via hdmi to plasma

    I'm having problems playing a dvd from the gx630 while connected via HDMI to my plasma.  Without fail, the screen freezes up within 5 minutes of watching the movie.  I can watch a dvd on my laptop without a problem.  Any suggestions?

    For what it's worth, I experienced the same thing recently with my GX630 while connected to a 42-inch Sharp Aquos. I tried a couple of different discs, but all of them froze just as you described and I had to reboot. I read somewhere that you have to "turn off" the laptop screen when doing this because of dvd copying restrictions, but I haven't looked into it any further.

Maybe you are looking for

  • Settlement rule for AUC not automatically generated

    Hi Experts, I am working on a capital project scenario where I have configured the investment profile and assigned this to the project profile.  I have also configured the settlement profile and allocation structure for settlement to FXA. On release

  • Why won't my Mac & Logic Pro detect my input device(s)?

    Hey, I'm using a macbook with OSX 10.8.2 and Logic Pro with a steinberg interface. I have also tried a tascam interface that was given to me by a friend to try, but I still have the same problem: Logic doesnt detect either of the interfaces, and neit

  • Service procurement - External staff and tem labour

    Hi, We have a customer requirement w.r.t  external service procurement for external staff and temp labour. The requirement is "Is it possible to integrate the time sheet entry functionality provided for ext staff and temp labour with any of the HR an

  • Migrating 10g ADF application for OC4J to 11g application for Weblogic

    Hi, I'm trying to migrate a 10g ADF application deployed in OC4J to 11g using the migration tool of JDeveloper. After some changes in code to adapt to the new api i have an error in libraries while trying to deploy in embeded weblogic. <30 Ιουν 2010

  • Deleted Mail Account Still Sending Mail

    Hi Apple World, Can anyone explain to me why an old gmail account which I used to have as an account on my Mac is still sometimes coming up as the from address when I send mail? This has got me in some trouble as people have been "replying" and I hav