Replenishmant storage location in MF60(reservation creation)

Hello,
In REM, we are using MF60 for two step material staging.
We have gone for two stage staging process.
First shop person will create reservation and then the store person will issue the material against the reservation.
Here when the resrvation is getting created , user
do not want to give the replenishment storage location on the sap screen.
User considers this as a pain.
Is there any way to bring the replenishment storage location
automatically updated in the reservation?
Please let me know in both scenarios,
scenario one --- by using inventory management
scenario two --- by using warehouse management.
Waiting for reply from Experts.
Regrads,
Ravindra Deokule

Hello Mahesh,
Thanks for your reply.
Your suggestion was valid if we were working with single step stock transfer process.
But as stated in the question , we are working with two stage process.
Here the stock determination button itself is not appearing on the SAP screen in MF60.
So I think your answer is not right Or may be let me know how
to bring the stock determination button on the SAP screen when you are creating the reservation.
Waiting for your reply.
Regards
Ravindra Deokule

Similar Messages

  • Updation of Replenishment storage location in MF60 ( reservation creation )

    Hello,
    In REM, we are using MF60 for two step material staging.
    We have gone for two stage staging process.
    First shop person will create reservation and then the store person will issue the material against the reservation.
    Here when the resrvation is getting created , user
    do not want to give the replenishment storage location on the sap screen.
    User considers this as a pain.
    Is there any way to bring the replenishment storage location
    automatically updated in the reservation?
    Please let me know in both scenarios,
    scenario one --- by using inventory management
    scenario two --- by using warehouse management.
    Waiting for reply from Experts.
    Regrads,
    Ravindra Deokule

    Hello Mahesh,
    Thanks for your reply.
    Your suggestion was valid if we were working with single step stock transfer process.
    But as stated in the question , we are working with two stage process.
    Here the stock determination button itself is not appearing on the SAP screen in MF60.
    So I think your answer is not right Or may be let me know how
    to bring the stock determination button on the SAP screen when you are creating the reservation.
    Waiting for your reply.
    Regards
    Ravindra Deokule

  • Storage Location MRP - transfer reservations

    We have this set up and are creating 311 reservations to transfer SLOC to SLOC.  Is there any way to set this up to use a 2 part process (like 313, 315)?  We need one location to "issue" when they post and the other location to be able to "receive" post.  It's a problem that posting the 311 moves the goods immediately to Unrestricted.  We'd also be open to any process that would automatically move the goods to blocked stock when the 311 was posted with MB1B.  Any help would be appreciated.  Thanks in advance.

    Hi,
    You cant create 2 reservation in the system for stock transfer b/w slocations.
    Automatic reservations are only created using Mvt type 311,not 313 and 315.
    For your second query,you cant post the stock to blocked because 311 is one step procedure and from URS tyo URS.For that to happen use 343/344 mvt types for your business scenario.
    Regards,
    Deepak.

  • Multiple receivng storage locations on Reservation (movement type 311)

    Hi
    We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
    Thanks
    Lokesh

    Hi,
    If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
    As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
    I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
    I would suggest you to follow the above steps.
    1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
    2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
    Regards,

  • Reservation storage location

    If there is shortage of stock to fulfill reservation reuirement , I want that reservation storage location should be appeared in purchase requisition so that when the stock is received from vendor, it can be directly posted to desired storage location.
    Can anybody help ?

    Dear
    As explained by my freinds if you have configured the MRP run at storage location level then after MRP run the system will generate requirements as per the requirement types collective or individual that you have mantained in the Material master for an particular material.
    So the point i want to make over here is you can default the storage location in PR through MRP run also while creating Po from the generated PR (thu MRP).
    Its upto you that you want seperate PO or single Po for two diffrent PR.
    And at the time of GR the storage location will be copied from the Po though at the GR level you can post the stock to any other storage location as per your need.
    Coming to your second question that you want to post the stock to an storage location against an reservation, for that i strongly belive that you will have to do one more transaction for the same ie issue or transfer posting against the reservation. Not possible at the GR level.
    Reward if usefull
    Regards
    Sujoy

  • SC 0011008450M7 503 No storage location data for 544_0612_13 in  gm01 gm01

    Hi All ,
                  After the creating a Reservation shopping cart for the inventory material , there is no follow on document (Reservation)is   created for the shopping cart. when we view the SC it is showing   the message :Contains errors. when i gone and checked in the RZ20 it is giving the error as below
            Shopping cart 0011008450 (Res. 0041001082): M7 503 No storage location data for 522_0602_10 in  gm01 gm01.
    We  maintained the all the view for  this material in material master (MM03).
    Please hlep.
    Regards
    Channappa Sajjanar

    Hi,
    1)Please check for user's extended attribute is assigned with correct storage location.
    2) while creation of the SC, under basic data tab, correct storage location must be populated.
    Regards
    Bhupendra

  • Material stagging at storage location level

    Hi Guys,
    When i do material stagging at storage location level (MF60) material moved from one storage location to another storage location 311 and material document is created in system .
    I want to do it through two steps that is material issue from one location and receipt in other location
    how to do it , what configuration need to be done .
    I do not have in WM in scope of implementation.
    Thanks and regards
    Thamizhchelvan G

    Dear,
    The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location.
    In OMBA you will see Goods Issue Doc Type..
    If you click that in the next screen , you will find Tcodes & Doc Type...
    Now Go to that T code & Press F4 in the Movement types filed...
    So the Above Doc type is applicable to those Mvt types..
    These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
    So based on the transaction attched to the Movement type the document type is determined for the Movement types.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Create storage location automatically for movement type 261

    Hi Experts,
    Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
    For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
    Did we missed any required configuration? Pls kindly advice on what we should do.
    Thanks a lot. Really appreciate the prompt response.
    Rgds,
    MD

    Here's the current situation,
    We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
    Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
    Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
    But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
    Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
    Thank you

  • How to restrict Availability check for a particular storage location

    Dear all,
    As per the Business requirement, System should not consider the stock in a particular storage location.
    while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
    How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
    Thank you,
    Raghu Ram.

    Dear Lakshmipati,
    as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
    I have tried to delete this storage location but system is not allowing to do so.
    I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
    please help us to resolve this issue, and thanks for your help in advance.
    thank you
    Raghu Ram

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • Automatic storage location view creation in maintenace order (IW31)

    Hello,
    Seems like I need some help.
    Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
    But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
    If I configure message CO312 as a (W)arning  message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
    How can I configure automatic sloc view creation in iw31? Is that possible?
    Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PM

    Hi,
    The customization required for Automatic Storage location creation at reservation are:
    Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
    first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
    Regards

  • Unrestricted Stock of issuing Storage Location in reservation

    Hi Experts,
    We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
    How it is possible.
    Kindly help me out, can we use sqvi or something else.
    Regards
    GR

    HI ,
    Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
    combination.
    TO achieve the Since we know the Material ,plant and storage location
    PIck up the Material Number --RESB-MATNR
    the Plant code --RESB-WERKS
    the storage LOcation--RESB-LGORT
    Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
    IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
    After Picking up all the three values ,pass those values in the Table.
    MARD line item vise present in the reservation (maintain a loop for the same)
    in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
    one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
    hope so it helps
    Regards
    Anjanna.

  • Need to change Storage location for reservations in production order

    During Production order creation we need to assign storage location against all the reservations in production order. Is there a way it can be done??

    Hi,
          check the user exit EXIT_SAPLCOSD_001.
    Sudheer.A

  • Automatic creation of Storage Location data with GR to Project stock (Q)

    Hello,
    during "normal" Plant stock GR (mvmt type 101) for a material, the Storage Location data gets automatically created, but this doesn't happen for Project stock (Q) material receipts.
    Is there a way to influence this either through customizing (of mvmt type?) or through an exit/enhancement/BadI?
    Thanks for the tips, br
    LK

    369468 - Storage location segment (MARD) in the case of special stock
    The special stocks sales order stock. and project stock. are not managed in a material/plant storage location segment (MARD). The existence of the MARD segment is thus irrelevant to a goods movement. Neither the checking nor the creation of the MARD segment is desirable with regard to performance and physical inventory aspects in particular. For this reason, this MARD segment is not read, checked or created automatically in the course of goods movements. We regard this as being in the best interests of our customers.

  • Auto Creation of Storage Location at the time of Goods receipt

    Dear All
    Please tell me how can i create storage location automatically at the time of Goods receipt.
    i already made the configuration in OMJ8 for movement type and required plant
    still, at the time of creating PO its not getting created..
    Please advice
    Narendra C.

    Hello Narendra,
    If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
    Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM

Maybe you are looking for