Replenishment - Msg WT134: Store order processing did not return any result

During the Replenishment run using TCODE: WRP1 following error is being encountered
<b>Msg WT134: Store order processing did not return any result</b>
The error is reported when more than 9 articles are being used.

impelemented the oss note: 979935

Similar Messages

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

Ipjone6, silver, 64GB
I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

how to reset password:
https://iforgot.apple.com/password/verify/appleid

IWeb Error: "Your search did not produce any results."

I just updated my iWeb and added the new search and comment features to my iWeb site. I am happy to see these features added but the search feature gives me a page displaying "Your search did not produce any results." Does anyone else have this issue? I am using my .Mac account and did a "Publish all to .Mac" to see if that would help. Comments work great. Can anyone help? Not good to have a feature that does not work.
Cheers!
Patrick

I am having the same problem and can probably give you an answer as to why the search feature is not working...
Look carefully and you may notice that by re-publishing your site with 1.1, iWeb has converted all text on your site to image files (probably .png). This is what happened when I re-published.
Therefore, there is technically no text to "search" through...
No fix as of yet... I will ttry to republish yet again tonight

The statement did not return a result set in ireport

Hi,
I am Building a Report in iReport(Jasper Reports). I called a stored procedure from iReport by passing a parameter in Query Editor. I am getting an exception saying "The statement did not return a result set". When
i use Temp Tables in stored procedure i am getting the exception.
If there is no temptable in Stored procedure there wont be any exception.
This is my Stored procedure
Create PROCEDURE [XUSP_REPORT_SOPRINT] @BNUM VARCHAR(20) AS
BEGIN
DECLARE @FQTY BIGINT
DECLARE @ITNAME VARCHAR(100)
DECLARE @COUNT INT=0
DECLARE @COUNT1 INT=0
CREATE TABLE #BILL_PRINT(
   [BNUM] [varchar](20) NOT NULL,
   [CNAME] [varchar](30) NOT NULL,
   [CNUM] [int] NOT NULL,
   [ITNAME] [varchar](100) NOT NULL,
   [ITEM#] [int] NOT NULL,
   [QTY] [int] NOT NULL DEFAULT 0,
   [UNIT] [varchar](5) NOT NULL,
   [PRICE] [float] NOT NULL DEFAULT 0,
   [BASIC] [float] NOT NULL DEFAULT 0,
   [DISCOUNT] [float] NOT NULL DEFAULT 0,
   [FRQTY] [int] NOT NULL DEFAULT 0,
   [BADDR] [varchar](300) NULL,
   [CADDR] [varchar](300) NOT NULL,
   [BDATE] [datetime] NULL DEFAULT (sysdatetime()),
   [BILLBY] [varchar](50) NOT NULL,
   [ROUTE] [varchar](200) NULL,
   [AMT] [float] NOT NULL DEFAULT 0,
   [VAT] [float] NOT NULL DEFAULT 0,
   [VAT AMT] [float] NOT NULL DEFAULT 0,
   [AMT_AF_DISC] [float] NOT NULL DEFAULT 0,
   [AMT_AF_VAT] [float] NOT NULL DEFAULT 0,
   [TOT_DISC] [float] NOT NULL DEFAULT 0,
   [ROUND_OFF] [float] NOT NULL DEFAULT 0,
   [TOT_VAT] [float] NOT NULL DEFAULT 0,
   [AMT_UNDER_VAT] [float] NOT NULL DEFAULT 0,
   [NETT] [float] NOT NULL DEFAULT 0,
   [TOS] [varchar](30) NULL DEFAULT 0,
   [CDISC] [float] NOT NULL DEFAULT 0,
   [SDISC] [float] NOT NULL DEFAULT 0
insert into #BILL_PRINT SELECT [BNUM]
      ,[CNAME]
      ,[CNUM]
      ,[ITNAME]
      ,[ITEM#]
      ,[QTY]
      ,[UNIT]
      ,[PRICE]
      ,[BASIC]
      ,[DISCOUNT]
      ,[FRQTY]
      ,[BADDR]
      ,[CADDR]
      ,[BDATE]
      ,[BILLBY]
      ,[ROUTE]
      ,[AMT]
      ,[VAT]
      ,[VAT AMT]
      ,[AMT_AF_DISC]
      ,[AMT_AF_VAT]
      ,[TOT_DISC]
      ,[ROUND_OFF]
      ,[TOT_VAT]
      ,[AMT_UNDER_VAT]
      ,[NETT]
      ,[TOS]
      ,[CDISC]
      ,[SDISC]
FROM [SALES_DETAILS] WHERE BNUM=@BNUM
CREATE TABLE #ITNAME_0
ITEM VARCHAR(100) NOT NULL,
FREE BIGINT NOT NULL
INSERT INTO #ITNAME_0 SELECT ITNAME,FRQTY FROM SALES_DETAILS WHERE FRQTY<>0 AND BNUM=@BNUM
--SELECT * FROM #ITNAME_0
SET @COUNT=(SELECT COUNT(*) FROM #ITNAME_0)
WHILE @COUNT!=0
BEGIN
SET @FQTY=(SELECT TOP(1) FREE FROM #ITNAME_0)
SET @ITNAME=(SELECT TOP(1) ITEM FROM #ITNAME_0)
SET @COUNT1=(SELECT COUNT(*) FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND BNUM=@BNUM)
IF @COUNT1=2
BEGIN
   UPDATE #BILL_PRINT
   SET FRQTY+=@FQTY
   WHERE ITNAME=@ITNAME AND QTY<>0
   DELETE FROM #ITNAME_0 WHERE ITEM=@ITNAME AND FREE=@FQTY
   DELETE FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND QTY=0
END
SET @COUNT=@COUNT-1
END
--SELECT *FROM sales_details
SELECT *FROM #BILL_PRINT where bnum=@bnum
DROP TABLE #BILL_PRINT
DROP TABLE #ITNAME_0
END
Please help me out in this.
Thanks,
Shreyas M

This is a forum for Reporting Services (SSRS). If you're using Jasper reports then you should be posting in relevenat forums. I'm not sure there would be enough people with Jasper report experience here to help you out!
Anyways in SSRS when we use Temp tables in procedure it will throw exception in editor but when you save and run it will still work fine. Did you try saving it and executing report? Did the error still persisted?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Your search did not produce any results

Hi,
I'm publishing my iWeb site to my ME.COM account.
I have the site password protected as offered in iWeb.
But when the site is password protected the search with the iWeb search field does not provide any results.
Only the message:
"Your search did not produce any results."
If I disable the password protection for the site in iWeb and republish, the search provides the expected results.
Any idea what's wrong?
Thanks and Regards,
JO

Sorry, didn't test enough.
After publishing a few new blog entries under the password protected site, I tested the search again and it does not return any results.
It was working for a short time when I republished unprotected and then again protected.
Now that I added block entries under the protected site mode, search is brogen, again.
Any Help?
Thanks and Regards,
JO

Boot loader did not return any data.

Hi,
i have installed the Oracle VM Server and Oracle VM Manager in two different machines. I'm using the VM Manager to create the Virtual Machines(guest). I followed all the steps given in the Oracle VM Manager User guide 2.2. I'm using the RHEL5 as the OS for the guest machine. I receive an error saying 'Boot loader did not return any data.'. The vm.cfg file has got created in the path /OVS/running_pool/12_VM1. The contents of the vm.cfg file are as below
bootloader = '/usr/bin/pygrub'
disk = ['file:/var/ovs/mount/616CC4FA976D4352B1630FFCE835FEC5/running_pool/14_VM1/System.img,xvda,w']
keymap = 'en-us'
memory = '1024'
name = '14_VM1'
on_crash = 'restart'
on_reboot = 'restart'
uuid = '3a925bc9-1555-b5bb-b0f0-c5958db65468'
vcpus = 1
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=vm123']
vif = ['mac=00:16:3E:02:8B:64, bridge=xenbr0']
Can any one help out in this ASAP.
Thanks in Advance.

re..
sorry but did you installed guest OS or not ?
Did you install from image, from dvd ...?
If yes try start youre vm from server terminal
#>xm create -c vm. cfg
*T

Basic NOT EXISTS query not returning any results

DB Version: 10gR2
One of our tables in the test schema is having less number of columns than the PROD shema.
To determine which are missing columns in this table in Test schema i did the following.
-----In Test Schema
CREATE TABLE XYZ2
(COL1 NUMBER);        ----------only one column
SQL > CREATE TABLE tables_test_list AS SELECT TABLE_NAME,COLUMN_NAME FROM USER_TAB_COLS;
Table created.--- In the prod schema
SQL> CREATE TABLE XYZ2
2 (COL1 NUMBER,
3 COL2 NUMBER       ----------- same table name with an extra column
4 );
Table createdAnd from the PROD schema i execute the following SQL to determine what are the columns that are missing in the TEST schema
select column_name from User_Tab_Cols outer
where table_name='XYZ2'
and not exists (select 1 from TEST_SCHEMA.tables_test_list inner where outer.TABLE_NAME=inner.TABLE_NAME )But the above query is not returning any results. Any idea why?

Actually, the example from the link I posted earlier:
[email protected]> (
2 select 'IN T1, NOT T2', column_name,data_type,data_length
3    from user_tab_columns
4   where table_name = 'T1'
5 MINUS
6 select 'IN T1, NOT T2', column_name,data_type,data_length
7    from user_tab_columns
8   where table_name = 'T2'
9 )
10 UNION ALL
11 (
12 select 'IN T2, NOT T1', column_name,data_type,data_length
13    from user_tab_columns
14   where table_name = 'T2'
15 MINUS
16 select 'IN T2, NOT T1', column_name,data_type,data_length
17    from user_tab_columns
18   where table_name = 'T1'
19 )
20 /

Table-Valued Function not returning any results

ALTER FUNCTION [dbo].[fGetVendorInfo]
@VendorAddr char(30),
@RemitAddr char(100),
@PmntAddr char(100)
RETURNS
@VendorInfo TABLE
vengroup char(25),
vendnum char(9),
remit char(10),
payment char(10)
AS
BEGIN
insert into @VendorInfo (vengroup,vendnum)
select ks183, ks178
from hsi.keysetdata115
where ks184 like ltrim(@VendorAddr) + '%'
update @VendorInfo
set remit = r.remit
from
@VendorInfo ven
INNER JOIN
(Select ksd.ks188 as remit, ksd.ks183 as vengroup, ksd.ks178 as vendnum
from hsi.keysetdata117 ksd
inner join @VendorInfo ven
on ven.vengroup = ksd.ks183 and ven.vendnum = ksd.ks178
where ksd.ks192 like ltrim(@RemitAddr) + '%'
and ks189 = 'R') r
on ven.vengroup = r.vengroup and ven.vendnum = r.vendnum
update @VendorInfo
set payment = p.payment
from
@VendorInfo ven
INNER JOIN
(Select ksd.ks188 as payment, ksd.ks183 as vengroup, ksd.ks178 as vendnum
from hsi.keysetdata117 ksd
inner join @VendorInfo ven
on ven.vengroup = ksd.ks183 and ven.vendnum = ksd.ks178
where ksd.ks192 like ltrim(@PmntAddr) + '%'
and ks189 = 'P') p
on ven.vengroup = p.vengroup and ven.vendnum = p.vendnum
RETURN
END
GO
Hi all,
I'm having an issue where my Table-Valued Function is not returning any results.
When I break it out into a select statement (creating a table, and replacing the passed in parameters with the actual values) it works fine, but with passing in the same exact values (copy and pasted them) it just retuns an empty table.
The odd thing is I could have SWORN this worked on Friday, but not 100% sure.
The attached code is my function.
Here is how I'm calling it:
SELECT * from dbo.fGetVendorInfo('AUDIO DIGEST', '123 SESAME ST', 'TOP OF OAK MOUNTAIN')
I tried removing the "+ '%'" and passing it in, but it doesn't work.
Like I said if I break it out and run it as T-SQL, it works just fine.
Any assistance would be appreciated.

Why did you use a proprietary user function instead of a VIEW? I know the answer is that your mindset does not use sets. You want procedural code. In fact, I see you use an “f-” prefix to mimic the old FORTRAN II convention for in-line functions!
Did you know that the old Sybase UPDATE.. FROM.. syntax does not work? It gives the wrong answers! Google it.
Your data element names make no sense. What is “KSD.ks188”?? Well, it is a “payment_<something>”, “KSD.ks183” is “vendor_group” and “KSD.ks178” is “vendor_nbr” in your magical world where names mean different things from table to table!
An SQL programmer might have a VIEW with the information, something like:
CREATE VIEW Vendor_Addresses
AS
SELECT vendor_group, vendor_nbr, vendor_addr, remit_addr, pmnt_addr
FROM ..
WHERE ..;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Bing based federated result sources not returning any results for non-English languages

I have a result source with this query:
http://www.bing.com/search?q={?searchterms} language:fr site:msdn.microsoft.com&format=rss&count=50&first={startIndex}
This used to give me 40-50 results for common terms like download, blog etc.
From today (7/14) IST, this source does not return any results. There are no results if I execute this query directly in IE either.
Same behavior observed for: language:es, language:de etc.
I do however get results as expected for language:en.
Any idea what the issue might be?

Hi Swapnil,
According to your description, my understanding is that no results returned when searching with non-English in the Result Source query.
I tested the same scenario per your post and I got the same results as you got.
I recommend to change the language:fr in the Result Source query to be lang=fr to see if the issue still occurs.
More references:
http://kbdump.com/sharepoint-2013-opensearch-search-twitter-facebook-wikipedia-page/
http://richardstk.com/2013/11/08/sharepoint-2013-federated-search-to-bing/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
Is this the result of a badly written query? A bug in 10.2.0.4?
Is there a way to rewrite the query so that is does work on 10.2.0.4?
Testcode:
declare
   l_xml xmltype;
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.*
        from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                   ,'http://www.opengis.net/ows/1.1' as "ows"
                                    ,'http://schemas.opengis.net/gml' as "gml"
                                    ,'http://www.w3.org/1999/xlink' as "xlink"
                                    ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                      ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                      p_xml columns title varchar2(100) path 'ows:Title'
                      ,format varchar2(100) path 'Format'
                      ,style xmltype path 'Style') as t;
begin
   l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<Capabilities xmlns="http://www.opengis.net/wmts/1.0"
xmlns:ows="http://www.opengis.net/ows/1.1"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
version="1.0.0">
<Contents>
<Layer>
    <ows:Title>brtachtergrondkaart</ows:Title>
    <ows:Identifier>brtachtergrondkaart</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>top10nl</ows:Title>
    <ows:Identifier>top10nl</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>bgt</ows:Title>
    <ows:Identifier>bgt</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
</Contents>
</Capabilities>');
   for r_layer in c_layer(l_xml)
   loop
      dbms_output.put_line(r_layer.title);
   end loop;
end;Result on 10.2.0.5:
brtachtergrondkaart
top10nl
bgt

This one's strange indeed.
I can reproduce on 10.2.0.4 and one of the following seems to fix it :
1) Specifying the column list in the SELECT, instead of t.* :
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.title, t.format, t.style
        from xmltable(or,
2) Using an extended FLWOR expression :
for $d in //Layer
where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
The same query run from SQL is OK.

cm:search is not returning any result when logical operator '!' is used.

<cm:search is not returning any result when logical operator '!' is used.
I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi log.
The query is <cm:search id="docs" query="!(object_name like 'Sport*')" />

HI cam
Thanks for your reply, but i found the problem it was because my server administrator password has changed by network guys... and because of it crawler unable to access the content
I wrote my solution here i hope it will help other people
http://bvs-sharepoint.blogspot.com/2015/03/sharepoint-search-is-not-returning.html
RB

Directory - Org Unit Listing Not Returning Any Results

Hello Everyone,
We are using Nakisa v4.1 on EHP7.0 at the moment. In the user interface, Directory > Org Unit Listing is not returning any results while Employee and Position Listings are working just fine.
What would be the cause ?
Appreciate your help,
Kind regards

Hi,
I am using a live build copied from SAP_Live_RFC.
Below you can find what the cds.log says when I try to search an organizational unit.
2289. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2290. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, deneme]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2291. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=deneme , decoded= deneme
2292. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2293. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2294. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2295. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 32ms
2296. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 86ms
2297. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2298. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2299. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, test]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2300. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=test , decoded= test
2301. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2302. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2303. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 28ms
2304. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2305. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 73ms
2306. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2307. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2308. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, kalite]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2309. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=kalite , decoded= kalite
2310. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2311. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2312. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2313. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 43ms
2314. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 94ms
2315. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
Regards.

Spotlight not returning any results

Hi, when I use spotlight at the top right corner of the desktop to search for anthing I no longer get any results.
Since then I have tried the following with no luck:
I repaired permisssions
I downloaded a program called onyx and executed the rebuild index button
I deselected all 14 categories in the spotlight preferences and reselected them
I drug the harddrive to the privacy tab, closed, reopened preferences and drug the harddrive off - this caused a reindex but still no results.
I rebooted a few times.
Still spotlight is not showing any results. I see that others have formatted an reinstalled but I do not want to do this!

I next dug into Metadata and found that it was a
script calling these three key lines:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Versions/A/Support/lsregister -r -domain system
/usr/bin/touch /var/run/.metadataRunning
/System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework/ Versions/A/Support/mds -bootstrap
all three of these ran ok for me
what is interesting though, in /System/Library/StartupItems/Metadata the line
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Versions/A/Support/lsregister -r -domain system
was commented out...
I uncommented it but Spotlight is still broken.
in addition to the previously suggested fixes, I zapped my PRAM but to no avail.
On my powerbook when I boot up, the Spotlight icon does nothing when clicked on. If I log out and log in again Spotlight works :P
So now in addition to being frustrating to use it appears now Spotlight is quite flakey.
I hope the new stuff Steve did not mention at WWDC06 is a working, user friendly find feature.
In the mean time I still need to find stuff!!!
Apple? Hello? any ideas?
Has anyone tried the app Spotless?
http://www.fixamacsoftware.com/software/spot/
Did you notice Spotlight wierdness after using this app?

XQuery not returning any results when doc contains ENTITY refs

Dear Forum members,
I am a bdbxml newbie so please be gentle.
I am trying to run xqueries against a TEI P5 document on bdxml 2.4.13 using Oxygen 9 (I'm also using Python and the API - it's not working either)
My XML contains transcripts of poems written in medieval Welsh. There are a lot of Entity references which I am including at the start of the document as:
<?oxygen RNGSchema="http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/teilite.rng" type="xml"?>
<!DOCTYPE TEI [
<!ENTITY aacute     "á"> 
<!ENTITY Aacute     "Á"> 
<!ENTITY acirc     "â"> 
<!ENTITY Acirc     "Â"> 
<!ENTITY agrave     "à"> 
<!ENTITY Agrave     "À"> 
<!ENTITY aring     "å"> 
<!ENTITY Aring     "Å"> 
<!ENTITY atilde     "ã"> 
<!ENTITY Atilde     "Ã"> 
<!ENTITY auml     "ä"> 
<!ENTITY Auml     "Ä"> 
<!ENTITY aelig     "æ"> 
<!ENTITY AElig     "Æ"> 
<!ENTITY ccedil     "ç"> 
<!ENTITY Ccedil     "Ç"> 
<!ENTITY eth     "ð"> 
<!ENTITY ETH     "Ð"> 
<!ENTITY eacute     "é"> 
<!ENTITY Eacute     "É"> 
<!ENTITY ecirc     "ê"> 
<!ENTITY Ecirc     "Ê"> 
<!ENTITY egrave     "è"> 
<!ENTITY Egrave     "È"> 
<!ENTITY euml     "ë"> 
<!ENTITY Euml     "Ë"> 
<!ENTITY iacute     "í"> 
<!ENTITY Iacute     "Í"> 
<!ENTITY icirc     "î"> 
<!ENTITY Icirc     "Î"> 
<!ENTITY igrave     "ì"> 
<!ENTITY Igrave     "Ì"> 
<!ENTITY iuml     "ï"> 
<!ENTITY Iuml     "Ï"> 
<!ENTITY ntilde     "ñ"> 
<!ENTITY Ntilde     "Ñ"> 
<!ENTITY oacute     "ó"> 
<!ENTITY Oacute     "Ó"> 
<!ENTITY ocirc     "ô"> 
<!ENTITY Ocirc     "Ô"> 
<!ENTITY ograve     "ò"> 
<!ENTITY Ograve     "Ò"> 
<!ENTITY oslash     "ø"> 
<!ENTITY Oslash     "Ø"> 
<!ENTITY otilde     "õ"> 
<!ENTITY Otilde     "Õ"> 
<!ENTITY ouml     "ö"> 
<!ENTITY Ouml     "Ö"> 
<!ENTITY szlig     "ß"> 
<!ENTITY thorn     "þ"> 
<!ENTITY THORN     "Þ"> 
<!ENTITY uacute     "ú"> 
<!ENTITY Uacute     "Ú"> 
<!ENTITY ucirc     "û"> 
<!ENTITY Ucirc     "Û"> 
<!ENTITY ugrave     "ù"> 
<!ENTITY Ugrave     "Ù"> 
<!ENTITY uuml     "ü"> 
<!ENTITY Uuml     "Ü"> 
<!ENTITY yacute     "ý"> 
<!ENTITY Yacute     "Ý"> 
<!ENTITY yuml     "ÿ"> 
<!ENTITY lab "<">
<!ENTITY rab ">">
<!ENTITY amp "&">
<!ENTITY dash "-">
<!ENTITY delta "d">
<!ENTITY macron "-">
<!ENTITY mdash "-">
<!ENTITY nbsp "">
<!ENTITY pound "">
<!ENTITY cdb "c">
<!ENTITY ddb "d">
<!ENTITY ldb "l">
<!ENTITY rdb "r">
<!ENTITY udb "u">
<!ENTITY umac "u">
<!ENTITY wacute "w">
<!ENTITY wcirc "w">
<!ENTITY Wcirc "W">
<!ENTITY ycirc "y">
<!ENTITY Ycirc "Y">
<!ENTITY vbar "vbar">
]>
<TEI xmlns="http://www.tei-c.org/ns/1.0">
<teiHeader>
<fileDesc>
<titleStmt>
<title>...
When I try an run a simple xquery like //TEI I'm not get any results. However, if I hack the XML source to remove all entity references, remove the ENTITY declarations and reload the document into bdbxml then the xqueries work. Can anyone offer any insght into why this situation may have arisen and how I might get around it? It seems as if the presence of the ENTITY declarations is somehow effecting the internal index...
all help appreciated,
AL

Big thanks to John,
I've been a typical newbie and not really understood everything implied by John's very helpful answer in this thread. Now that I now understand how to reference namespaces correctly, John's previous answer really does hit the mark.
Big thanks
Here is the working code. The important thing to remember for any other newbies is to always preface the query with the namespace - which I was not doing.
declare namespace tei="http://www.tei-c.org/ns/1.0";
doc("source.xml")//tei:body
or
declare namespace tei="http://www.tei-c.org/ns/1.0";
doc("source.xml")//tei:head
etc.

Replenishment - Msg WT134: Store order processing did not return any result

Similar Messages

Maybe you are looking for