Replenishment Storage Loaction

Hi MM Gurus,
I have a problem in replenishment storage location. I have 2 storage locations under one plant which is required to replenish the stock automatically. I have maintained the proper indicator in MRP 4 view SLoc indicator "2" and re-order point with lot quantity.
I did not eneter anything in the procurement type field, b'cas I believe it is not required.
When I run the MRP for location 0001, a reservation is created in the storage location 0001 where the stock is below the ROP. But the stock is not moved to 0001.
My Question:
(1). How the system to find the source storage location?
(2). How reservation will be processed to confirm the stock movements from 0002 to 0001.
Thanks & Kind Regards,

Dear
You can create a stock determination rule in customizing and you can assign that rule to material master & to the respective application in configuration ( for eg..for mvmt type or for pull list....). So that the replinishment location will be automatically determined by the system while picking.
How to use MF60
Regards
JH
Edited by: Jiaul Haque on Sep 21, 2010 3:09 PM

Similar Messages

  • Sale of same material from two different storage loactions

    hi,
    how can i configure to sale same material code from two different storage loactions?
    for eg if material code is 15000 and it is extended in two storage location A and B.My requiremnet is i want to sale from both storage loction at same time A and B both.How can i map it?
    thanks
    Nakul

    Dear Nakul Raj,
    If you want to sale same material from different storage locations it can be done.
    First raise the sales order enter the material code and quantity as a first line item and give the storage location "A" in item shipping tab.
    Then give the same material code and quantity (how much you want to send) as a second line item with storage location "B".
    Then save the document, do the delivery, the storage locations will be copied from order to delivery, if you want to change you can do so.
    Do the PGI.
    Hope it will resolve your issue.
    Please reply if any further clarifications
    Kindly try and let me know the result
    Thanks&Regards
    Raghu.k

  • Updation of Replenishment storage location in MF60 ( reservation creation )

    Hello,
    In REM, we are using MF60 for two step material staging.
    We have gone for two stage staging process.
    First shop person will create reservation and then the store person will issue the material against the reservation.
    Here when the resrvation is getting created , user
    do not want to give the replenishment storage location on the sap screen.
    User considers this as a pain.
    Is there any way to bring the replenishment storage location
    automatically updated in the reservation?
    Please let me know in both scenarios,
    scenario one --- by using inventory management
    scenario two --- by using warehouse management.
    Waiting for reply from Experts.
    Regrads,
    Ravindra Deokule

    Hello Mahesh,
    Thanks for your reply.
    Your suggestion was valid if we were working with single step stock transfer process.
    But as stated in the question , we are working with two stage process.
    Here the stock determination button itself is not appearing on the SAP screen in MF60.
    So I think your answer is not right Or may be let me know how
    to bring the stock determination button on the SAP screen when you are creating the reservation.
    Waiting for your reply.
    Regards
    Ravindra Deokule

  • Storage Loaction transfer from R/3

    Hi Experts
    How do we transfer storage loactions from ECC to SRM
    Regards

    Ivan  issue was solved :-D. My problem was because the FM BBP_RFC_READ_TABLE didn't exist in R/3.
    This issue was solve when we applied note 1175255 in our R/3.
    Storage location replication problem
    br
    muthu

  • MF60 - Replenishment storage location  missing !! help

    Hello friends,
    I am running pull list in t-mf60 , when I execute the data in automatic mode in global setting, the Replenishment storage location is coming blank for all material codes even some material have stock in main store location . Also I have assigned main store location in SPRO.
    Kindly help
    Regards
    sam

    Dear Sam,
    Generally replenishment Storage location field will be seen with filled values if Warehouse Management is
    actived and in the other normal cases we have to fill the repl.storage location manually before staging the
    materials.
    Regards
    Mangalraj.S

  • Default "Replenishment Storage Location" in Pull list

    Hi Gurus
    I want to assign a Default "Replenishment Storage Location in Pull list", what are the settings required
    pl suggest
    thanks
    K.Prabakaran

    Please see that following is set\
    1. Configuration settings in OSPX
    1.1 set - Plant to SDG
    1.2 Create Stock det rule
    1.3 For above created stock det ruleplantSDG set the following
    1.4 sorting/qty distribution proposal/other setting-Stock detr online\
    1.5 set the storage loc with different stock type and priority
    2. assign SDR to material in plant/storage view 2
    3 see that you have maintained the materioal in all the storage loc where you have entered the storage loc in step 1.5
    4. maintain safficiet stock in storge loc
    5 Now create a production order and release it.
    6. In mf60 see that that material is selected and click on create replanishment
    7. select the item from table down and click on batch/stock determination
    follow the steps and come back if any issue.

  • Mass Extension of storage loaction

    Dear Experts ,
    I have defined a new storage location . I need to extened may articles for this storage loaction .
    Is there any transaction avalable where i can do this activity en mass ?
    Regards
    Anis

    Dear D N ,
    Mass transaction can change the existing entries . It is not possible to exteend the article to a new store . Please suggest if there is a mass transaction for extendint to a storage location .
    Regards
    Anis

  • Issue: Purchase order release strategy with storage loaction.

    Hi Friends,
    I have created release strategy for purchase order considering following characteristics.
    1. Plant
    2. Purchase organization
    3. Purchase group
    4. Document type
    Hence the release strategy is working fine.
    Now the requirement is changed, PO approves should be picked depending on the storage location wise. So i tried to create characteristic for storage location with table name CEKKO and with field LGORT. However system not allowing to create, telling that field LGORT not found in table CEKKO.
    Can any one tell me how to maintain this LGORT filed in structure CEKKO.
    Thanks in advance
    Shashidhar

    HI Shashi ,
      Thanks for your quick response,
    I have Appended a structure to Standard Structure CEKKO with Field LGOBE.
    Also we written the code :move:  i_cekko = e_cekko, in user User-Exit M06E0004 function exit
    FUNCTION EXIT_SAPLEBND_002.
    However, the release strategy is not triggering when PO is saved,
    also the user-exit is not getting triggered , even though i have included the statement ' Break-Point'
    in it.
    Kindly reply.
    Thanks  ,
    Shashidhar

  • Split deliveries by Storage loaction

    Hi All
    Please could you assist me with the following request , I am currently trying to split a delivery by storage location and having no luck .
    I have tried a few of the options availble via the SCN community but it has not helped (http://scn.sap.com/thread/3377338) .
    I have loooked in the copy routine option but it does not seem as though this is possible . After looking at this note  https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=546668 it does not seem possible to use the copy routine option .
    Can anyone advise what would be the best way to do this going forward ?
    Thanks
    Regards
    Justin Naidoo

    Hi Guys
    Just an update from my side . Using ZUKRL field for splitting a delivery works to the extent that when you save the delivery only the items specific to the split criteria are saved in that single delivery .
    I think my biggest issue was I expected this splitting to create 2 deliveries , but this does not seem to be the case . I had to  find an alternate to solve this issue using an event linkage on the likp business object . Hope this will help someone in the future .
    If anyone has managed to split and create 2 deliveries using the ZUKRL please do let me know how .
    Thanks.  

  • Document storage loaction in RMS

    hi all,
    where can we find the storage location of a document created in RMS/transaction Organizer? can we create an XLS file using BAPI_DOCUMENT_CREATE2? if we can please tell me about the status and other required paramaeters.
    any useful help will be rewarded with points.
    thanks in advance,
    Anil

    Dear SAM
    that is mean if the STO is created with certain storage location i can't change the storage location , but if the STO is created with respect to certain storage location and the material exist in another storage location in the same plant what we have to do to create Out bound deleivery
    thanks

  • Get the item storage loaction of deleted delivery(DO)

    Hi All,
    Is there anyway to find the storage location for items of deleted delievry order ?
    Thanks in advance.
    Regards,
    TNR

    Hi
    I think, you can NOT retrive the deleted Delivery document to see the storage location of the item.
    One way to find is , check whether storage location specified for the item in the Sales order (if you have not deleted the Sales order yet. In standard, storage location is not determined in the Sales order).
    Another way is to see the assignment of storage location determination (Assign picking location) in IMG.
    Find out the Shipping point for the item, Plant and Storage condition from the material master data from the "Storage 1" view.
    See the assignment , what is the Storage location to be determined for this combination of Plant , Shipping point and Storage condition.
    Edited by: pradyumna on Sep 19, 2009 12:04 PM

  • Replication of storage loaction issue from crm to ecc

    HI Experts ,
    I am facing issue while store location replication from CRM to ECC.
    I have create field "Hub Location" using AET  on web  ui and behind that store  location search field is working .
    I have already created a Order . I have copied that order .Add store location .
    When i save Now all process executed and BDOC execute successfully with no error .
    I have enhanced BADI data exchange and add code in method crm_dataexchange_after_fill method and added store location .
    Issue : Now when i go-to to crmd_order transaction and checked that order then i am getting error that Store location plant is not defined .
    Please help .
    Regards ,
    Rishi

    Hi Rashi,
    Sorry for the late reply.
    Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
    Once you create the order in CRM and it will come to debug in ECC.
    Check TI_EXTENSION_IN tables whether your values are coming in.
    If not your CRM Middleware BADI coding was not done correctly.
    Hope this would help you.
    Regards,
    Bala

  • RE: How to perform replenishment with shelf storage

    I had set the maximum and replenishment qty for the article in material master.
    In the shelf rack, I need to execute replenishment to bring in stock from the high rack.
    What's the TCODE to execute this function?
    I am in rel .7
    I tried LP21, LP22 and LP24. All does not match my requirement.
    Have I missed out any tcode?
    Here is how it works.
    Article # 100 has a replenishment qty of 100 pcs, a maximum qty of 100 and min. of 10 pcs.
    I had stock in 350A01 and 350B01 and 350C01. All stock in each bin dropped below 10 pcs, eg 5 pcs.
    When I run the replenishment, it should trigger a requirement and allow me to create a transfer order of 3 line item to bring stock from my hgh rack to each of the bin.
    Thanks
    Bye

    Dear Colin,
    Transcation code LP24 (i.e. program RLLNACH4) is the correct one for replenishing storage types with putaway strategy L. However, the minimum quantity you enter in the corresponding field in the material master refers to the stock of entire storage type, not to the stock of the individual bin.
    Best regards,
    Christiane

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • Storage location determination with MRP

    Hi GURUu2019s,
    I need to know what set up decides which Storage location is used for MRP if there is more than one storage location per plant.
    Please guide me.
    Cheers,
    Kumar.S

    Dear
    Pleaae do the following :
    1.Check in OMIR keep the indicator as  Blank  (IMG-Production-MRP-Planning-Define Storage Location MRP per Plant-It should not be 1 OR 2 .
    2.Make sure that materials in those storage loaction should not have indicator 1/2 in MRP4 view .
    Bssically , you do nto need to change any configuration setup in case  because it will by defalut as Blnak in OMIR -means all the  materials in varioaus storage location are MRP relevent .Those storage location should be under plant which hase activated for MRP (spro-mrp-activate MRP for Plant )
    Hope this helps
    Regards
    JH

Maybe you are looking for