Replica Active Directory server in windows server 2008 R2

I installed and configured a secondary active directory server in 2008 R2 for fault tolerance as well as backup active directory server
what i wanted to know is if my primary AD goes down??? what changes i need to do my users pc since they are using primary DNS of of primary AD IP.. i am confused i want to know what need to be done if AD goes Down

> shall i update my DHCP configuration to assign primary DNS as
> 192.168.1.225 and secondary DNS as 192.168.3.245 and other DNS as
> 8.8.8.8 etc.
Yes. and you shall NOT deploy 8.8.8.8 as a DNS server to your clients,
but you shall configure this as a forwarder on your DNS servers.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Active Directory not working Windows Server 2003 R2

Hi,
Like the subject said my root problem is either my Active Directory or DSN server. In order to properly explain the situation I will have to make the full Story. I was contacted by a family member to help
out a Non profit organisation with there server problem. Their current config is Windows Server 2003 R2 Running DC,AD,DNS,DCHP,File Services( i know is not efficient).
Here is how I come in to play, prior of me helping the had another server running same spec started having hardware failure and the invested in a new server. The person that set it up did replicate the server
on the new one as far as AC and Domain controller but nothing else. We ll now the DC01 failed and no user cannot login into a new computer
or if a new employee will try to added the changes don't take effect. Seeing the situation I went for the basic and seize fsmo roles to the new server. Perform Metadata clean up. Configure the DC02 as Master Domain Controller. Now everything
is set up and running but still No new user can be added or any exiting can log in
a different computer. At this point am out of answer I try everything I found in the forum. Am almost to the verge of deleting all and start
from scratch me knowing all config. Sorry for the long story am not good on resuming stuff. Please let me know If I need to add any other detail
I repeat DC01 is DEAD...
Also when a new user try to login or an existing user try to loging they get the system cannot log you on now because the domain is not available

Not Sure if this is the info requested but I ran the commands
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\administrator.LUTHERAN>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : dc02
Primary Dns Suffix . . . . . . . : Lutheran.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Lutheran.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #45
Physical Address. . . . . . . . . : 00-1C-23-BF-E6-69
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.6
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.6
Primary WINS Server . . . . . . . : 192.168.100.6
C:\Documents and Settings\administrator.LUTHERAN>
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : WINS Client(TCP/IP) Protocol
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Internet Protocol (TCP/IP)
Bind Name: Tcpip
Binding Paths:
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Client for Microsoft Networks
Bind Name: LanmanWorkstation
Binding Paths:
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: Client for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WebClient
Bind Name: WebClient
Binding Paths:
Component Name : DHCP Server
Bind Name: DHCPServer
Binding Paths:
Component Name : Wireless Configuration
Bind Name: wzcsvc
Binding Paths:
Component Name : Network Load Balancing
Bind Name: Wlbs
Binding Paths:
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Component Name : Steelhead
Bind Name: RemoteAccess
Binding Paths:
Component Name : Dial-Up Server
Bind Name: msrassrv
Binding Paths:
Component Name : Remote Access Connection Manager
Bind Name: RasMan
Binding Paths:
Component Name : Dial-Up Client
Bind Name: msrascli
Binding Paths:
Component Name : File and Printer Sharing for Microsoft Networks
Bind Name: LanmanServer
Binding Paths:
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Generic Packet Classifier
Bind Name: Gpc
Binding Paths:
Component Name : Application Layer Gateway
Bind Name: ALG
Binding Paths:
Component Name : NetBIOS Interface
Bind Name: NetBIOS
Binding Paths:
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WAN Miniport (IP)
Bind Name: NdisWanIp
Binding Paths:
Component Name : Direct Parallel
Bind Name: {A4DC6983-452B-41F9-B696-5112E5E6F1C6}
Binding Paths:
Component Name : WAN Miniport (PPPOE)
Bind Name: {5B69EEC5-2676-460B-9E03-F38B02BA4474}
Binding Paths:
Component Name : WAN Miniport (PPTP)
Bind Name: {DEE98315-C28A-4CC8-9233-E6C3506C16D3}
Binding Paths:
Component Name : WAN Miniport (L2TP)
Bind Name: {9BFC4E35-93B2-4811-8A56-69149ED0837E}
Binding Paths:
Component Name : RAS Async Adapter
Bind Name: {50239872-7742-4BB5-A28E-0B814085C2A6}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #48
Bind Name: {19218099-5DDC-4936-A111-75E4D7250A24}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #45
Bind Name: {52BE526E-7FAE-4458-9691-E333DA333601}
Binding Paths:
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
C:\Documents and Settings\administrator.LUTHERAN>

How to install first forest and active directory on the windows server 2012 R2 core?

hi to all
i installed a windows server 2012 R2 Core edition on the server platform and i want install first forest and Domain on this server core by cmdlet...but i cannot install it. i search in the technet and other sites and blogs on the internet
and i saw many commands that use for install it such as "DCpromo /unattend" and even
"Install-addsforest" in the powershell but still i cannot get a result from these commands.
i need step-by-step guide that help me for install new forest and domain in the server 2012 R2 core.
thanks a lot friends

C:\PS>Install-ADDSForest
-DomainName mydomain.local -CreateDNSDelegation
-DomainMode Win2012 -ForestMode Win2008R2
-DatabasePath "d:\NTDS"
-SysvolPath "d:\SYSVOL"
-LogPath "e:\Logs"
you can use above example
Darshana Jayathilake

Installing Sun Directory Server on Windows Server 2008

Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.

Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
Edited by: etst123 on Jan 29, 2009 10:39 AM
(added link to bug report)

Problem In Data Base Creation... Oracle 10g server in windows server 2008

I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...

this is a forms forum.
please post in Database Installation

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

Problem instaliing sun one LDAP server on windows server 2008 r2

Hi all ,
I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
I am following this manual for installing :
https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
I have a problem with the cacao agent and how to install it .
I've got this error message :
c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
Configuring Cacao...
## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
#### Cannot create service for instance: [cacao.instance.name].
#### Cannot perform firstime inialisation and configuration.
## Exit code is 1
Failed to configure Cacao.
I stuck and with no other solutions . I hope if you could to help with this issue .
i will glad to know if there is any other ways to install this specific Ldap server ,
Thanks,
Alon

You most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
http://docs.sun.com/source/817-1830-10/win.html
Relevant section is:
You can start the Administration Server in either of the following ways:
# Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
# From the Control Panel�s Services item.
HTH...

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

SBS 2008 - Microsoft Azure Active Directory Module for Windows PowerShell - is not supported by your version

Hi,
I was following the artigle (http://www.messageops.com/resources/office-365-documentation/ad-fs-with-office-365-step-by-step-guide/) but
when try to install the 'Office 365 PowerShell Module' shows a msg saying that 'windows azure active directory module for windows powershell is not supported by your version'.
And according to the blog (http://blogs.office.com/2014/04/15/synchronizing-your-directory-with-office-365-is-easy/) "DirSync can be
installed on an existing domain controller"
>>>> Any help is appreciated.
* Similar issue: http://www.adaxes.com/forum/post7398.html

Ok Vasil tks for reply, but this server is 64x. I dont get the point.
Microsoft Windows [Version 6.0.6002]
C:\Users\Administrator>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
CLIENTNAME=ANJOTEC_NOTE01
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=COMPANYBR-SERVER
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
lib=C:\Program Files\SQLXML 4.0\bin\
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\COMPANYBR-SERVER
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\ProgramData\Oracle\Java\javapath;C:\Program Files\HP\NCU;C:\Windows\sys
em32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\
1.0\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program File
(x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Serve
\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program F
les (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQ
Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Vis
al Studio 8\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\ExchangeMapi\
C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x
6)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Rox
o Shared\9.0\DLLShared\;C:\Program Files\Microsoft\Exchange Server\bin;C:\Progr
m Files\Microsoft\Exchange Server\Scripts
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 30 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1e05
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\9.0\Roxio Central
3\
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Administrator\AppData\Local\Temp\2
TMP=C:\Users\Administrator\AppData\Local\Temp\2
USERDNSDOMAIN=COMPANYBR.LOCAL
USERDOMAIN=COMPANYBR
USERNAME=administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
C:\Users\Administrator>

Backup Windows Server on Windows Server 2012

We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
feature several times and still nothing.
I am new to the forum, so descupem me if there is another topic like this.

Hi There,
Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
Good Luck

Urgent help needed to setup Forms 6i Server on Windows Server 2003

Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
Phil

You it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution.

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works.

Error when configuring Siebel Server in Windows server 2003

Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS

Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.

Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang

Integrate On-Premises Exchange Server With Windows Server Essentials

I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!

Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu

Replica Active Directory server in windows server 2008 R2

Similar Messages

Maybe you are looking for