Replicas stuck in join state 0

After a partition merge, all replicas are stuck in join state 0. Have been this way for about a week.
Any Help would be appreciated.
Thanks.

Well, if you have a server in your tree which is down ( e.g. s server you shut off 5 years ago, but neglected to delete its NCP server object ) that will cause the issue, as well as a time sync issue. So these issues you can check and fix. Have you? If its not that, then you have a stuck partition operation. Something is preventing it from transitioning. That could be corruption or one of a number of preconditions have fallen apart. Do you see any errors showing up when you SET DSTRACE = ON and SET DSTRACE = +SYNC +PART You can use the "cancel partition operation" and hope that work, which it may well not. But if it does not, you will have a broken directory and have burnt all your bridges - especially if you 5 minutes later discover that 5 year old dead server object I spoke of.
What can Novell do that you cannot? A lot. And the guy you will be deal with sees 10 totally messed up beyond all comprehension eDir systems a day and can likely fix your issue in his sleep. IF you "followed the directions" and made a backup of eDir on each server and done a health check prior to the Merge, Novell can use the backups to restore the masters. They have the ability to edit the databases underneath to force things.
We've all been where you are now. Looking for the Easy Button. But you need to rapidly go through the stages of grieving an get to the acceptance stage an call Novell.
-- Bob

Similar Messages

Sql complex join statements

I have been seraching for reference material that show
an illustration of ER Diagrams and SQL join statements.
I am usually developing queries from looking at an ER diagram and no other documentation. The books I am finding only have simple easy SQL join examples. I can no find a book that shows difficult join queries or relate join queries with ER diagrams. I am stuck in one case
where I have a table that relates to two other tables but there is a third table in common with both of them.
How should this join statement look?
Sometime I code the join logic correct but the parentheses
are in the wrong place. Can you help on this one as well?

NLV,
Is this still an issue?
If so, please read Visakh16's last
response. We need more information.
[Personal Site] [Blog] [Facebook]

Using offset in join statement

hi,
i wanted to use offset in join statement. but it is giving error.
select a~kunnr
          a~vkorg
         from knvv as inner join zcust
         on knvv-kunnr+5(5) = zcust-refid.

hi neha,
try this code i tested it.
types: begin of ty_knvv,
       INCLUDE type knvv,
       kunid type i, " For u type is zcust-refid
       end of ty_knvv.
data: it_knvv type STANDARD TABLE OF ty_knvv INITIAL SIZE 0,
      wa_knvv type ty_knvv.
select *
from knvv
    into table it_knvv.
loop at it_knvv into wa_knvv.
kunid = wa_knvv-kunnr+5(5).
wa_knvv-kunid = kunid.
MOdify it_knvv TRANSPORTING kunid.
read table zcust into wa_zcust with key resid = wa_knvv-kunid.
endloop.

Workflow stuck in starting state after applying SharePoint 2010 CU December 2012

I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!

It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global

Agent get stucked in Reserved State

HI CUCCE gurus,
Need assistance on this issue. In our remote office, our Sales Team has a linegroup setup, the Sales extensions are part of the linegroup and at the same time its their ACD line when they logged in to Cisco Agent Desktop.
The issue is, when they got a call from the linegroup their CAD state change to "Reserved" and it stuck from that state and nothing they can do to change the state but to logoff, close the apps and log back in.
I enabled debug on once of the Sales CAD (see attached output).
Any troubleshooting tips that you can advise or detailed steps to check from our system.
Our CAD is 7.X
Our CUCCE is 7.X
Our CUCM 7.X
Thank you.

Hi Jhun,
Agent stuck in reserved state it means, the ICM has reserved the agent, but the call is not getting delivered to the agent extension.
If you are using SIP trunk, you would probably need to check the CSS and Partitions over the trunk. Also, any recent changes made on the CSS of the SIP trunk you would need to reset the SIP trunk.
The CSS on the SIP trunk should contain the partition of the phone.
Also, you would need to check on the Agent targetting rule in the config manager of the ICM. The agent extensions should be added to the Agent targetting rule
Hope this helps!!!
Cheers,
Dass
Please rate useful posts

I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones.

Query based on "NATURAL JOIN" statement of Oracle9i

I have created following 4 tables
create table CUST_MASTER
(CUST_NO NUMBER(3),CUST_NAME VARCHAR2(20),CUST_CITY VARCHAR2(20));
create table ITEM_MASTER
(ITEM_NO NUMBER(2),ITEM_NAME VARCHAR2(20),
PRICE NUMBER(4));
create table ORDER_HEADER
( ORDER_NO NUMBER(4), CUST_NO NUMBER(3));
create table ORDER_ITEMS
( ORDER_NO NUMBER(4), ITEM_NO NUMBER(2), QTY NUMBER(3));
Based on the above 4 table I have executed the following query.
select c.cust_no, c.cust_name, c.cust_city, oh.order_no, i.item_no, i.item_name, i.price, oi.qty
from cust_master c, item_master i, order_header oh, order_items oi
where c.cust_no = oh.cust_no and oh.order_no = oi.order_no and oi.item_no = i.item_no;
How should I build similar query in Oracle9i making use of "NATURAL JOIN" statement?

Hallo,
yes you are correct.
From SQL Reference
NATURAL JOIN The NATURAL keyword indicates that a natural join is being performed. A natural join is based on all columns in the two tables that have the same name. It selects rows from the two tables that have equal values in the relevant columns
Nothing about foreign keys.
Test:
select * from scott.emp natural join scott.dept
    DEPTNO      EMPNO ENAME      JOB               MGR HIREDATE                  SAL       COMM DNAME          LOC
        20           7369     SMITH          CLERK                7902     17.12.1980            800                    RESEARCH           DALLAS
        30           7499     ALLEN          SALESMAN            7698     20.02.1981           1600            300     SALES              CHICAGO
        30           7521     WARD           SALESMAN            7698     22.02.1981           1250            500     SALES              CHICAGO
        20           7566     JONES          MANAGER              7839     02.04.1981           2975                    RESEARCH           DALLAS
        30           7654     MARTIN         SALESMAN            7698     28.09.1981           1250           1400     SALES              CHICAGO
        30           7698     BLAKE          MANAGER              7839     01.05.1981           2850                    SALES              CHICAGO
        10           7782     CLARK          MANAGER              7839     09.06.1981           2450                    ACCOUNTING         NEW YORK
        20           7788     SCOTT          ANALYST              7566     19.04.1987           3000                    RESEARCH           DALLAS
        10           7839     KING           PRESIDENT                     17.11.1981           5000                    ACCOUNTING         NEW YORK
        30           7844     TURNER         SALESMAN            7698     08.09.1981           1500              0     SALES              CHICAGO
        20           7876     ADAMS          CLERK                7788     23.05.1987           1100                    RESEARCH           DALLAS
        30           7900     JAMES          CLERK                7698     03.12.1981            950                    SALES              CHICAGO
        20           7902     FORD           ANALYST              7566     03.12.1981           3000                    RESEARCH           DALLAS
        10           7934     MILLER         CLERK                7782     23.01.1982           1300                    ACCOUNTING         NEW YORK
alter table scott.emp drop constraint fk_deptno
select * from scott.emp natural join scott.dept
    DEPTNO      EMPNO ENAME      JOB               MGR HIREDATE                  SAL       COMM DNAME          LOC
        20           7369     SMITH          CLERK                7902     17.12.1980            800                    RESEARCH           DALLAS
        30           7499     ALLEN          SALESMAN            7698     20.02.1981           1600            300     SALES              CHICAGO
        30           7521     WARD           SALESMAN            7698     22.02.1981           1250            500     SALES              CHICAGO
        20           7566     JONES          MANAGER              7839     02.04.1981           2975                    RESEARCH           DALLAS
        30           7654     MARTIN         SALESMAN            7698     28.09.1981           1250           1400     SALES              CHICAGO
        30           7698     BLAKE          MANAGER              7839     01.05.1981           2850                    SALES              CHICAGO
        10           7782     CLARK          MANAGER              7839     09.06.1981           2450                    ACCOUNTING         NEW YORK
        20           7788     SCOTT          ANALYST              7566     19.04.1987           3000                    RESEARCH           DALLAS
        10           7839     KING           PRESIDENT                     17.11.1981           5000                    ACCOUNTING         NEW YORK
        30           7844     TURNER         SALESMAN            7698     08.09.1981           1500              0     SALES              CHICAGO
        20           7876     ADAMS          CLERK                7788     23.05.1987           1100                    RESEARCH           DALLAS
        30           7900     JAMES          CLERK                7698     03.12.1981            950                    SALES              CHICAGO
        20           7902     FORD           ANALYST              7566     03.12.1981           3000                    RESEARCH           DALLAS
        10           7934     MILLER         CLERK                7782     23.01.1982           1300                    ACCOUNTING         NEW YORK
ALTER TABLE scott.emp
ADD CONSTRAINT fk_deptno FOREIGN KEY (deptno)
REFERENCES SCOTT.dept (deptno)
ENABLE NOVALIDATE
/Regards
Dmytro Dekhtyaryuk

Updateable scrollable result sets with join statement

I am writing a generic GUI fronend for any database that has a JDBC2.0 driver available.
I have been using scrollable updateable result sets. These work well for individual tables but as soon as two tables are linked either implicitly or explicitly with a join statement the result set meta data isDefinitelyWriteable is set to false thus preventing the result set from being updated.
Assuming I am using the JDBC-ODBC driver with java sdk1.4.0 and MS Access (although I have used other databases and JDBCs I assume that the one mentioned will be a common combination and needs to work) is there any way of getting linked tables to be updateable with scollable result sets.
I am using scrollable result sets since this prevents the necessity of putting the data in a secondary data store.
I am able to link tables programmatically by requerying the linked table with a new where clause each time the cursor moves in the linked table but this seems rather wasteful. This method is not vey satisfactory when attempting to display data from more than one table which have more than one linked level (i.e. cascaded links).
Is there a simple solution to this problem or do I have to do a rewrite using an update statement instead of having an updateable result set. I assume this method would also require the result set to be reloaded after the update.
Any suggestions much appreciated.

I am trying to make the GUI as flexible as possible by constructing "views" which if necessary link tables on one field in each table. This is fine for two tables but when linking to several tables the information thats produced cannot be read easily because as it stands the information from each table is displayed on a separate tabbed page. This mechanism allows me to keep each record set for each table separate and updateable.
Since I could see that this was not very user friendly in the way that it displayed the data I decided to try and introduce a join on two or more tables and hence the introduction of the current problem.
I mentioned that the objective was to be flexible and therefore I also allow queries to be written by the user to facilitate for any shortfalls of the automatic query construction produced by using the "views" mechanism.
So the answer to your question is yes I do control the SQL selections with one mechanism but ultimately no I do not because I provide a fail safe which allows the user to enter arbitary SQL.
I only really want a solution for the controlled SQL construction mechanism where I create the link between two or more tables. As mentioned earlier these are linked on one field only but I wish to provide the option of displaying the result in a single table (tabbed page) rather than spread across multiple tabbed pages.

AP name is not consistent in APs Join Stats.

hi all,
i have strange issue in my controller (WISM2) AP name is not consistent in APs Join Stats page while the naming is consistent in Wireless status page.as shown below.

Thanks,
The problem solved after i cleared the access point from join AP stats. then restart it after that will join with normal name.

Content Switching Module (CSM): Sessions stuck in closing state

Hi guys,
I'm troubleshooting a CSM with 4.3(1).
We migrated a real server from windows to linux, since then lot's of sessions stuck in closing state until the idle timer expires.
I traced the traffic from the client to the csm and from the csm to the real server what I saw is the following behaviour at the end of a session:
windows real server: client sends FIN -> real server acks the FIN -> real server sends FIN -> client sends RST -> real server sends RST -> CSM deletes session from session table
The linux real server mostly behaves like the windows real server but sometimes behaves as follows:
client sends FIN -> real server sends FIN, but does not ack the FIN sequence number of the client -> real server sends RST -> client sends RST -> CSM does not delete session from session table, it stucks in closing state
Does anybody know how I can solve this problem of half-closed sessions other than decreasing the idle timeout?
Is it possible to configure CSM to close and delete sessions not only on FIN-ACK packets but also on RST packets?
Or to use a different fast idle timeout when sessions are half-closed?
Many thanks in advance,
Thorsten

Hi Fabrizio,
CSM_FAST_FIN_TIMEOUT is already set to 10 seconds.
What I found out while testing is that CSM_FAST_FIN_TIMEOUT works with configurations where idle timeout is configured > 0.
But when idle timeout is configured to 0 (what meas no idle timeout) the csm seems not to use CSM_FAST_FIN_TIMEOUT: Half closed sessions will stuck in closing state.
Any idea why cms behaves this way?
Regards,
Thorsten

Workflows stuck in "Starting" state.

Workflows have been running fine for awhile. All workflows are currently stuck in a "Starting" state. Was finally able to capture this in ULS
03/20/2014 11:58:23.46 w3wp.exe (0x15AC)                       0x2A98 SharePoint Foundation
Workflow Infrastructure       72fv Unexpected AutoStart Workflow: System.ArgumentException: Value does not fall within the expected range.     at Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties..ctor(SPWorkflow
workflow, String initiationData, Object context)     at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
runOptions)     at Microsoft.SharePoint.Workflow.SPWorkflowAutostartEventReceiver.<>c__DisplayClass1.<AutoStartWorkflow>b__0(SPSite superUserSite, SPWeb superUserWeb)
Any ideas?
TIA

Hi Milo,
Please check whether you have installed any CUs for SharePoint 2010.
Please install June 2013 CU or higher for SharePoint 2010, compare the result.
Here are some similar posts for you to take a look at:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Does 'For All Entries in itab' work exactly like 'Join' statement?

Hi,
I would like to know that if 'For All Entries in itab' work exactly like 'Join' statement?
If yes, then when I use 'For All Entries in itab' and a 'Join' statement seperately with the same logical conditions for both, the number of records returned by the two methods are not same. Ideally, they should both return the same number of recs.
Can somebody help?
With regards.

Hi,
for all entries will not work in the same way unless untill it should satisfy some conditions,
it has some pre-requisests...
like in the select clause or in where clause or in both the cluases, there should be entire key..
then only it will behave like the join statement..
hope i am clear.
please revert back if u have any quiries.
Regards,
Sunil Kumar Mutyala.

[SOLVED] Mailbox import requests stuck in 'queued' state

We have a small Exchange 2013 environment with one server having all roles. I try to import archive mailboxes from an Exchange 2010 environment. It has worked quite well for a while. However, all import requests are now 'stuck' in 'queued' state. Restart
of Replication service, transport service and even server reboot didn't help.
When I run
get-mailboximportrequest | Get-MailboxImportRequestStatistics -Includereport | fl
I observe that PositionInQueue value tells me that there are 85 import requests waiting :
ItemsTransferred                       :
PercentComplete                        : 0
CompletedRequestAgeLimit               : 30.00:00:00
PositionInQueue                        : 85/90 (Position/Queue Length)
InternalFlags                          : None
FailureCode                            :
There should be no requests waiting as I removed all requests in advance before I issued new import requests:
get-mailboximportrequest | Remove-MailboxImportRequest
How can I really reset an import queue by zeroing PositionInQueue ?
Any suggestions/tips?

Hi,
Glade to hear the good news. Thanks for your update.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Ciscoworks daemon manager stuck at Stopping state

I am working on LMS 3.2 . Tried to stop the daemon service with " net stop crmdmgtd ". It stuck on stopping state since few hours now. I can still open the application. Need a suggestion to terminate the previous command and restart the
daemon service.

You should have dmgtd.exe process in Task Manager stuck.
Although you can kill it directly and then try the stop command once again before starting. But to be sure if any process in not stuck, best way would be to reboot the server once.

VM got stuck in "stopping" state, and cannot be stopped

Dear all,
I am using Oracle VM 3.2.2.
One of my VM got stuck in "stopping" state, and cannot be stopped.
How can I troubleshoot this problem...

Q: Is the VM still running, i.e. can you ssh to the VM?
Q: Find the server where the VM is running, and restart the ovs-agent, i.e. "service ovs-agent restart". Did this help, or is the agent crashed, any zombies?
Possible root cause: These type of errors are typically ovs-agent bugs. First update oracle vm manager to the 3.2.4 release, not 3.2.6. Next update the dom0s to 3.2.4, not 3.2.6. You may need to setup a ULN 3.2.4 yum repo to update the dom0s. As you can see in these forms, 3.2.6 is may not ready for prime time, stick with 3.2.4, is stable.

Replicas stuck in join state 0

Similar Messages

Maybe you are looking for