Replicate a 2tb NTSC HD to a 2tb Mac HD

After 30+ years in CP/M, DOS and Windows, I've just recently migrated from my Windows XP Pro computer to an iMac 27 (Lion 10.7.2). My 2 TB backup external hard drive is in NTSC format. I wish to replicate it to another external 2 TB HD formated for my iMac. With both Hard Drives connected through USB, the "copy" of 1.4 TB's of files is reported to take 16 days. Is there a quicker way to copy one to another? As my iMac can only read NTSC format, my objective is to continue writing my backup files, but to do that, my new external 2 TB hard drive needs to be in Mac format. Hence a pair of 2 TB hard drives connected through USB. Thoughts of others?
Regards,
Terry Smythe
Winnipeg, Canada

Found I did not need to replicate my NT hard drive over to a Mac hard drive. Paragon offers an inexpensive fix that facilitates a Mac writing to an NT hard drive. See:
http://www.paragon-software.com/home/ntfs-mac/
With this installed, I now have my NT drive in an external enclosure connected to my iMac 27 through a FireWire cable.
Regards,
Terry Smythe
Winnipeg, Canada

Similar Messages

How do I replicate my software and data my from current Mac desktop to my new Mac laptop?

How do I replicate my software and data my from current Mac desktop to my new Mac laptop?

Connect the two with a Firewire cable: Transferring files between two computers using FireWire. Boot the old computer into Target Disk Mode. Start the new computer normally which should take you to the Setup Assistant if this is the first time you've started it. Use the option in Setup Assistant to transfer data from the old computer.
If this is not the first time you've started the new computer then use Migration Assistant in the Utilities folder to transfer your data.
Migration Assistant tips and tricks
OS X Lion- How to use Migration Assistant to transfer files from another Mac

I have a brand new airport extreme. I just ordered a WD My Book Studio 2TB Mac External Hard Drive Storage USB 3.0 Can I partition this and use one 1tb as a time capsule and 1tb on my desktop of my mac as a wireless hard drive? If so how?

How would I do this?

To partition the WD My Book, you could temporarily connect it to your MacBook Pro via USB. Then use the Disk Utility to partition it into two separate partitions of whatever size you choose for each.
Once partitioned and formatted (I would recommend HFS+), you can then disconnect the drive from the MacBook Pro and attach it to the new AirPort Extreme. The Extreme should now "see" the drive as two separate drives. You would then use the AirPort Utility to share out both drives.
For Time Machine, you would just need to select the appropriate shared drive.

25 Sony 8mm old Home videos importing as ntsc best import/export settings

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.
*((((You will need to convert the analog video to QuickTime using Apple DV-DVCPRO NTSC codec. The normal way to do this is with an analog-digital converter such as the Canopus ADVC-110 or ADVC-300 (not the ADVC-mini). However, if you have a miniDV camcorder that supports analog-digital passthrough then you could use the camcorder as the converter device.)))))*
I was lucky and found a sony camera that I hooked a four pin firewire to a 9 pin (800) to my mac.
*(((Keep in mind that DV video requires about 13GB per hour. If your 8mm tapes are all 120 mins (2 hours) long, you will need about 650GB to store all the captured video. Sounds like a 1TB drive to me. BTW - Firewire, not USB.)))*
I was thinking 2TB
*(((You need to capture the video in FCE. The proper easy setup is the DV NTSC DV Converter easy setup. Editing will then be done in a DV NTSC sequence.*
*How you export from FCE depends on what you want to do with the finished video. If you just want to burn DVDs, then export to QuickTime Movie. If you want to save the video at its 'full resolution' then also export as a QuickTime Movie. If you want to post to the web, or do certain other things with the finished video, you would export to QuickTime Conversion.))))*
I just want to store it on 2 hard drives one connected to a pogo plug so my family can see them and store the second at my brothers house as the back-up. What would be the best format for that?
Now you know my hardware so should I import the whole 2 hours or batches of like 1/2 hour segments.
Again thanks for your help this is saving me many trials and errors.

Converting PAL to NTSC and making a DVD

I have a couple of .avi files, some are in PAL and others in NTSC, I wanna make a DVD in NTSC mode, How can I convert the files?

Hi
This is not easy and You need other programs to do this.
.avi.
You can use MPEG-Streamclip to convert the AVI files so that QuickTime can play them
and to streamingDV for iMovie.
This may work - I had great problems to get .avi into anything usably.
*PAL to NTSC or other way*
A. Commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
• MPEG Streamclip (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
Yours Bengt W

Burning the same DVD in NTSC and PAL

Hi,
I need to burn two DVDs, one in NTSC and one in PAL.
When I started the process of burning in NTSC, it took about an hour to "Process Movie"
After that, I changed the setting in iDVD Preferences to PAL, and started to burn another DVD. This time the software skipped the "process movie" and just burned the DVD.
I thought that the movie needs to be processed again, to fit the 25fps of the PAL. but it didn't. Of course I'm happy for the time I saved. But I want to make sure that I'm right. Am I?
thanks a lot
ymotion

Hi
Most PAL DVD-player can playback NTSC (old TV = Black/White)
Few NTSC DVD-player can playback PAL
Just changing iDVD project from one to the other might work BUT THE RESULT will be BAD.
Using a program converting from PAL to NTSC is far more better eg JES_Deinterlacer.
*PAL to NTSC*
A. Conversion of commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to conver the PAL DVD to streaming.DV
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about640x480 pixles (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about768x576 pixles (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9pixles on each side to add togheter as 720
Yours Bengt W

Switch NTSC DVD slideshow to PAL

Good morning,
my wife and I recently received a DVD Slideshow made on a PC in the NTSC format from our Wedding photographers.
My family lives in Europe and cannot watch NTSC format. Is there a way to make a copy of my slideshow but in the PAL format?
Thank you very very much.
P

Hi
Usually - NTSC-DVDs plays well in PAL players - but not the other way around.
So here is my notes on PAL to NTSC. Just think the other way around.
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

NTSC Lines

When I watch NTSC mpeg2 movies on my MAC i am getting horrizontal lines through the picture. The Mpeg looks fine on a TV, but when watching it in DVDSP and on other computer monitors the lines appear. Can anybody tell me why and how to remove them?

Does that really deinterlace, or just pick one of the two fields and show it for twice as long and just double the lines in that field to show all 480 of them? That is certainly one way of deinterlacing, though more sophisticated ones average the two fields, others do motion detection, etc. The Faroudja one does that, plus isolates the luma from the chroma (luma is sharper), does some edge detection, does the doubling, and then reapplies the chroma for less smear (among other, patented things).
It says this in the manual:
Show Single Field: Optimizes playback when using field-based video sources. This is
especially important with video that has fast motion, because it will reduce the
motion artifacts. However, selecting Show Single Field with frame-based video
sources results in reduced resolution (edges may appear jagged).
Ed
Mac G5 2.5Quad; 4GB Ram; 2x500 internal Mac OS X (10.4.7) 2x500GB FW800; Sony PDX10

IDVD - PAL - NTSC - REGIONS; All messed up?

So I finished a project on iDVD, and the "clients" are from many different countries... The original project was worked as PAL. In the end, in iDVD I changed the setting to NTSC in order to write 3 disks. 1 for a client in Canada, and 2 for the U.S.
With the Canadian, there were no issues (at least the client didn't mention anything, only that the DVDs were great).
The one American, told me she had to change regions to her laptop DVD in order to watch it, but other than that it was ok.
The other American, could not watch the DVDs on her old windows xp laptop, also not on her DVD player on her Tv. She also went to a store to ask for help and the technician told her he could see the contents of the disk, but not play them; probably because they were not NTSC (!!!!). Finally she watched the DVDs by using VLC on her laptop (no region change here...)
What is going on? The same disks, 3 totally different behaviours...
Can anyone guess what went wrong?
I would really like to fix those problems...
Thank you!

Hi
Region - Should not be any problem - as iDVD only can make Region = Zero (0)
This means - Plays in any economical region (Has Nothing to do With TV-Standard at all)
TV-standard are as:
• NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
• PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
And Playback on Computer - should be able to use both - VLC usually works better than QuickTime in these cases. BUT here I noticed that PC/Macs are picky on Quality
• Burn speed I set down to x2 (or x4)
• I only use Verbatim DVDs - NO Memorex or NoName or other cheap brands - Yes it matters
• I use DVD-R as they play on more and even older DVD-players
My notes on this subject.
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

I want to convert a movie that I've created in iMovie from PAL to NTSC.

I've created a large movie using PAL but now want to convert it to NTSC to send to my family in Canada. It took ages to create. Is there an easy way of doing the conversion? I don't want to have to do it all again.

Hi
A. Using iMovie'08 to 11 - Will not give 100% result - as You want interlaced SD-Video = NTSC
B. Converting from PAL to NTSC - is Never 100% loss free - but You lose a bit
I use iMovie HD6 or FinalCut - as they can deliver 100% over to program that converts.
• iMovie and iDVD can convert - BUT RESULT WILL BE Very POOOOR.
My notes on How I do it
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on Internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on Internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

NTSC DVD created with iMovie 6.0.3. Need to convert to PAL.

Is there a way to do this without starting over? Can I switch iMovie from NTSC to PAL? Can I take my iMovie NTSC project and copy it to a new iMovie window after switching the preferences to PAL? Would that keep chapters in place? Can Toast or something do this? I sure hate to totally start over.

Hi
Please Karsten
b) export your iMovie project; drag the resulting file into a new PAL IDVD project; iDVD will ask you to keep or change the standard
IS NO GOOD WAY at all - It works but resulting DVD is barely viewable ! (jumpy, un-sharp and really bad)
a) is an excellent choice as long as TV is fairly modern - else result will be Bl/W
My notes on this:
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Convert iMovie Project to NTSC for Viewing on DVD Player

I have been trying to find some application (relatively cheap) that will convert an iMovie project to NTSC. I found one on line for $30, but didn't know if anyone had suggestions for a cheaper solution that is realiable. Thanks
PS - If iMovie can do it, PLEASE let me know how because I have looked and I haven't found anything that will let me burn in DVD player format.

Hi
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result. (so will other way around too)
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Can iMOVIE HD convert a PAL DVD to a NTSC DVD?

That was all! Can iMOVIE HD convert a PAL DVD to a NTSC DVD? That's my only question. Thanks.

Hi
A. Commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to conver the PAL DVD to streaming.DV
• I use Roxio Toast™ to do this (There are no free converter)
• MPEG Streamclip (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
Yours Bengt W

Converting PAL to NTSC in FCP

How do I convert PAL to NTSC in FCP?

Hi
May be my Amateuristic way can be of help ?
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

"Interlaced" frames export problm in 5.1.4

I've recently updated to 5.1.4 and now all the exports (via FCP QT movie, Compressor or QT conversion) shows a "banding", like a still of interlaced video in a NTSC Monitor, plus 3 very big lines across the image (horizontal, all of them).
I've been exporting the same sequence with the same settings from 1 week to date and burned it to DVD without any trouble. The only thing changed since last successful export was this 5.1.4 Update.
Of course I've tried to downdate to 5.1.3 but it seems that the page has some problems with the link. I've also searched in the System Library for the receipt of the update to FCP 5.1.3, but it seems to be deleted.
A solution or a link to 5.1.3 would either be VERY appreciated.
Thanx in advance
Mac Pro 2x2.66 Dual-Core Intel Xeon/3GB RAM/X.4.8/FCP 5.1.4 Mac OS X (10.4.8) AJA KONA3/HUGE 4110 1.2TB/SATA RAID 1.2TB
Mac Pro 2x2.66 Dual-Core/3GB RAM/FCP 5.1.4 Mac OS X (10.4.8) AJA KONA3/HUGE 4110 1.2TB/SATA RAID 1.2TB

you really don't want to go back to 5.1.3 that one was a bit buggy ... but 5.1.2 might be worthwile if you are sure you want to revert
posting a direct link here on Apple's discussion forums seems somehow wrong ... but here is a link to a link
http://forums.creativecow.net/readpost/8/925847?

Replicate a 2tb NTSC HD to a 2tb Mac HD

Similar Messages

Maybe you are looking for