Replicate Create CRM BP as an ECC BP

Hi Gurus
Is it possible to create a CRM BP as an ECC BP (Table BUT000) and not a Customer?
I thought this would be possible but the configuration does not appear to cater for this scenario.
Many Thanks in advance
Regards
Panduranga

Hi Panduranga,
If you want replicate a business partner in the good role from SAP CRM to SAP IS-U, try to create a BP (with CRM) by using transaction BUP1 and put "Sold-to Party" for BP role.
Best regards,
Rémi

Similar Messages

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

Create Material in CRM and also in ECC

Hello,
We have a non-SAP system (that is not being retired) where pre-production material numbers are generated for opportunity work.
(They are not initially ECC)
We are migrating our current opportunity system into CRM, and approach is the non-SAP system will start to send the pre-production materials into CRM (as products). To support opportunity creation.
However, when the materials do go into production, we then will set up the material numbers in ECC to support quotes/orders.
The material numer will be the same as when it was just pre-production status.
However, we are concerned with middleware replication...
What happens if we directly create a product in CRM, and then xx months later create the same product in ECC.
what happens when that material number tries to replicate to CRM and the number already exists?
Thanks
Chris

Hi Chris,
If you create the materials directly in CRM and then the materials with the same id in ECC, the products won't be in sync in the two systems and the transfers will start giving errors stating that the Product ID already exists and nothing will happen. Neither a new product will be created in CRM from ECC nor will it update the already existing once in CRM.
The reason being that the product created in CRM will be of the logical system identifier : CRM but when they will flow from ECC, they will be of the logical system identifier : ECC, hence the two won't link up.
/Hasan

Postcode can't replicate to CRM from ECC

hi,guys,
I found the postcode field and city field could not replicate to CRM from ECC,but other fields can replicate conrrectly.why?Our CRM system is 7.0 EHP1.

Hi Raymond,
Are you able to solve your problem. As I am facing the same issue. But I am trying to replicate from ECC TO CRM.
When I am changing Address like City in R3 and checking BDOC in crm its green and showing change city. But when I am checkign Business partner master date change city is not reflecting.
Regards
Nishith

Shipping point determination is not happening for CRM sales order in ECC

Hi,
When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
Your help would be highly appreciated.
Thank you.
Regards,
Nagi

Hello Nagi,
Shipping point is determined by the following three factors:
1.shipping condition 2.loading group 3.plant
So please check your customization by the following steps:
1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
3.Use T-code SPRO then press F5, go to Logistics Execution Shipping Basic Shipping Functions Shipping Point and Goods Receiving Point Determination Assign Shipping Points to check the shipping point is assigned correctly.
I hope this could be helpful.
Best regards,
Maggie

Difference between SAP CRM Security and SAP ECC 6.0 security

Hi
I have extensively worked on SAP ECC security but haven't have chance to work on CRM Security.
Can anyone please let me know the difference between CRM security compared to ECC security.
Thanks...

I am sorry to say, but instead of giving the guy a decent answer you are starting a fight or discussion about stupid forum points...
really sad.....
The big difference between SAP ECC and SAP CRM Security (up to release 5.0) was the following:
1) For sure there are very different transaction codes in SAP CRM as compared to SAP ECC in the first place
2) If you are familiar with R/3 or ECC authorizations; then you know that already on transaction code level, the 'allowed activity' is controlled on tcode level , whereas in SAP CRM , in most cases the 'allowed activity is not controlled by the Transaction code, but on authorization object level....
E.g. transaction code BP allows you to create/change/display any type of Business Partner (e.g; sold-to/ship-to/contact person/employee/customer) which is based on the business partner ROLE concept.... anyway...you can control the allowed activity based on different authorization objects.....
another example is business transaction processing...which can be launched by:
a very generic transaction code: CRMD_ORDER
transaction category related transaction codes :e.g.
> CRMD_BUS2000126 for activity management
> CRMD_BUS200115 for Sales processes
Again...allowed activity is not controlled by the tcode, but on authorization object level...
3) As of the new WEBCLIENT UI (which is valid as of release CRM2006s/CRM2007/CRM7.0) SAP also invented an extra authorization layer, which is UI COMPONENT LEVEL and logical links.... controlled by object UIU_COMP.
However, they also introduced the BUSINESS ROLE Concept (e.g; SALESPRO/MARKETINGPRO/...) which defines actually the functionalities, navigation bar, screen configuration, logical links you can use/see within the new WEBclient UI.
Another thing is that instead of using TRANSACTION CODES, as of these new releases, you are actually using 'external services'....so you do not authorize on tcodes basically....but the logic between tcodes and external services in relation to the authorization objects that are checked is more or less the same....
STANDARD authorization setup in the new WEBUI client is therefore controlled by both backend authorizations (not UIU component related) and the UIU_COMP (restricting access to workcenters/logical links/...)
4) Additionally SAP also provides a concept called ACE (which stand for ACCES CONTROL ENGINE)....
This requires a bit of customizing...and the rest is more or less pure customer development, as you will create your own methods where you'll define a logic which dynamically will verify what kind of access you have for an object....
You should now that ACE is actually implemented on top of your 'normal' sap crm security setup....
cheers
Davy Pelssers

CRM 2007 integration with ECC 6.0

Hi Friends,
I am currently working on the CRM 2007 Web UI
I have created the copy of existing standalone CRM client which is already having products, organization, BP created in it.
Now I am planning to connect the CRM client with the ECC client.
Is there any special care i need to take while connecting both the systems?
Also while doing replication any extra care do I need to take?
Help will be definately rewarded?
Cheers,
Raj

Hi!
Check the SAP Best Practices documents
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
There have a look at
C71: CRM Connectivity
B09: CRM Customizing Replication
regarding the connection and replication
rollo

CRM 3.1 to ECC 6.0 E-Commerce Upgrade

Hello,
We need some information regarding an upgrade from CRM 3.1 to ECC 6.0 E-Commerce module.
In CRM 3.1, there is only webshop functionality available and since R/3 is going to be upgraded before CRM, the entire master data will be available in ECC 6.0.
Let me know if this kind of arrangement is possible?
Regards
Edited by: Mahadevan Viswanathan on Jun 18, 2009 6:17 AM

Hi Lalitkumar !
   Look, I think that of course is possible to do the load using XI/PI but, I think that this is not the correct tool for this task, XI/PI is an integration broker, used basicly for message exchange between applications, generally transaction originated messages(i.e. a new employee created on SAP HR need to be sent to a legacy system responsible to control access to the company, a change in a material need to be updated in a legacy system of shop floor, etc) not to do data migrations.
   Another question is, to use XI/PI to do that, you will probably construct interfaces that, after the migration, will not be used for anything, being discarted, this sound to me as work wastefulness, adding extra work to the migration proccess(the interfaces construction/configuration) that is not mandatory to do that.
   Finally, another question to keep in mind is, if I´m not wrong(if nothing has changed about this) the cost of XI/PI license is calculated by the message traffic ammount(in MB, if i´m not wrong again), so a data migration can increase the cost, because of large volume of data, a cost that doesn´t exist if you do the migration using another tools like suggested by another SDN members.
   Thank you in advance, and best regards.
   Wilson

Creating support desk messge from ECC "Help"

Hi Experts,
I am working in SP20 EHP1 of Sol Man.
Kindly provide the configurations & authorizations to be done in ECC system & in Sol Man system to create the support message from ECC "Help" menu.
I have created the ZLFN transaction type (copy of SLFN). When i create the support message in ECC help menu, i need to create the support desk message with "ZLFN" transaction type.
Your valuable inputs required.
Regards
Senthil

Hi Naveen,
Thanks for the SAP note. Can you explain point no:5?
1. The client was not completely created by the copy of Client 001
    I need to check this with basis team
2. The BCOS_CUST table was not maintained correctly
    In BCOS_CUST (In satellite System), i have maintained the following:
    OSS_MSG W SM_DM3CLNT110_BACK CUST620 1.0
3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE)
I am having SAP_ALL authorization in Satellite system. Is these roles to be assigned in Sol Man also?
4. incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO)
For SLF1, i have assigned the action profile :SLFN0001_STANDARD_DNO. But inside this action profile, i have changed the values like PROCESS_TYPE to "ZLFN" & PARTNER_FCT_CREATOR to "ZLFN0002".
5. Number ranges are not assigned correctly
Can you explain this? For SLF1 & ZLFN , i have maintained "Internal" number ranges.
6. The logical system is not defined
Logical system for Sol Man & Satellite system is created.
7. Modification of the standard settings of the message type SLF1.
I have changed the Text for Priority in SLF1.

Is it possible to create Adobe Interactive form in ECC 5.0 IDES using WDA?

Hi every body,
I am trying to create an adobe interactive form in ECC 5.0 IDES using Web Dynpro for ABAP. But I am facing some configuration problems. My doubt here is -> "Is it possible to create abobe interactive forms in ECC 5.0 IDES using Web Dynpro for ABAP ?"
Please help me out.
thanks in advance,
best regards,
naveen.

Hi Naveen,
ECC 5.0 is NW04 - not NW04s so you don't have WDA at all as you should be able to see from e.g. it not appearing in the list of possible programming objects in transaction SE80.
You'd need ECC 6.0.
Double-check your SAP_BASIS release in menu System > Status > Component Information. If it says 6.40 then that's no good... you need to be on 7.00.
You can still use Java WebDynpro with ECC 5.0 of course.
Regards,
Jocelyn

How to create "valuation group code" in ECC system

Hi,
How to create" valuation group code" in ecc system and what is the path to create valuation grp code
Thanks&regards
kishore kumar

Use the following IMG path.
MM -> Valuation and Account Assignment -> Account Determination -> Account Determination without wizard -> Group together valuation areas (T Code OMWD). The Val.Grpg Code in this customizing is a freely definable 4-character code. You can then use this as valuation modifier in MM-FI account determination (OBYC).
Assign pts. if this answers your question!

Create CRM customer/account hierarchy node thru abap code

Hi,
Any one can help me on how to Create CRM customer/account hierarchy node thru abap code?
Is there any Class/methods, FMs that I can use to create node in customer/account hierarchy?
Sample codes will greatly help me.
I hope someone can help me on this since this is my urgent requirements on my project.
Thanks,
james

James,
You can find the FM, Class Lib and APIs under the package BUPA_HIERARCHY.

Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)

Hello Guys!
I need to create CRM 7 Activity from ISU SAP GUI cic0 screen using actiion box. Can any one please help me out what would be the best way calling CRM 7 activity from ISU SAP GUI, with my understanding the CRM 7 would not support sap gui and have to use webclient technology.
My scenario: Creating activity in CRM 7.0 from ISU GUI.
Existing process is creating an activity in CRM 4 from ISU SAP GUI, now business would like to move from CRM 4 to CRM 7. I need to find out or give suggestions to business what would be the best approach or solution to create CRM 7.0 activity from ISU point of as business would not like to use CRM WebClient screen to create activities. I need help on how i can suggest the busines.
Please help me out as i am new to ISU and hope you have understood my requirements.
Thank you in advance
Regards
shankar

Hi ,
Kindly use the Transaction launcher service using the Customization :
SPRO > CRM > UI Framework > Technical Role Definition > Transaction Launcher > Configure Transaction Launcher
SPRO > CRM > Interaction Center WebClient > Basic Functions > Transaction Launcher > Configure Transaction Launcher (Wizard)
Kindly read help documentation next to it for details.
Hope this helps.
Regards,
Anup

How to replicate a customized condition table from ECC to CRM

Dear All,
We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that? What replication object should we use?
Thanks in advance!
Erinn

Hi,
Use DNL_CUST_CNDALL, this would create the database table in CRM. Also you might need to run other loads corresponding to your scenario like DNL_CUST_CND_PR, DNL_CUST_PRC etc
Regards
Prasenjit

CRM Production was stoped suddenly and ECC orders to replicate in CRM

Dear Experts,
Greetings!!!.
Recently Because of Hardware Migration, CRM Production was stoped suddenly. and the orders are raised in ECC. directly.
Eg: in CRM YOR1 sales order for same they have created ZOR1 in ECC and are working. now i need to replicatie the orders which are created in ECC .
What will be the Customising settings and Middleware settings for the Same please guide us.
Thanking you in anticipation,
Regards,
Sany.

You must maintain on R/3 system the table CRMPAROLTP (in SM30). Set the following parameters:
Parameter name 1: CRM_SCENARIO
Parameter name 2: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 3: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
And on CRM side you must maintain the same parameters in table SMOFPARSFA:
Key : R3A_SALES
Parameter name 1: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 2: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Ensure that the scenarios are maintained consistently in both systems (CRMPAROLTP and SMOFPARSFA) to avoid errors.
Regards.

Replicate Create CRM BP as an ECC BP

Similar Messages

Maybe you are looking for