Replicate only a Few Datasources from Source sys

HI All,
I wanna know how do we repicate only a few data sources from a different source system for the first time in BW, without having to create all the other datasources which i don't want.
Thanks in advance.
Regards,
SHujath

Hello Shujath,
Welcome To SDN,
Before Replicating the data source in BW side, you need to check the Source system in RSA6. whether your desired DS is present there. Please take note of that dependent tree in which that particular DS is present.
Then come to BW side goto RSA1->source system->select R/3 source system and right click ---datasource overview. Here you will the same tree as in source r/3 in rsa6 replicate the node whichever that particular DS you want to be BW side.
Good day
Regards
Arun S

Similar Messages

Just installed icloud onto window 7 pc and only a few photos from ipad came through on photo stream why dont they all come through?

just installed icloud onto window 7 pc and only a few photos from ipad came through to Photostream why dont they all come through?

WOW! That font is difficult to read. But, see if this support document helps you http://support.apple.com/kb/TS3989. Photos stream is based on date and photos more than 30 days old are removed. Photostream is designed as a temporary storage to allow you to download the photos to the computer.

SQL*Loader - How to load only a few columns from a .csv file to ora table

Hi there,
Could anyone please let me know how to load few columns from a .csv
file into a oracle table using SQL*Loader.
I know how to create a .dat and .ctl file and run the sql loader.
Suppose I have a .csv file with
col1, col2, col3, col4
and I only need to load col1 and col3 into col_a and col_b respectively
in table_a?
structure of table_ a
col_a,
col_b
Please advice

Try like..it i will work..
LOAD DATA
INFILE 'test.txt'
LOAD DATA
TRUNCATE INTO TABLE T1
FIELDS TERMINATED BY ','
(col1,
col2 FILLER,
col3,
col4 FILLER
)

How do I restore only a few photos from iphoto using time machine?

I have about 100 photos that have become corrupt and I need to restore from time machine. When I try to restore the iphoto library, it says it cannot restore because library is too big. How can I get back only the few photos that are corrupt?
Thanks!
Dorothy

Please expain what you mean by 100 photos becoming corrupt? That is extremely unlikely - it is much more likely that you have a corrupted library
Probably rebuilding your iPhoto library is the solution but with no information about what you have or what is going on that is only a wild guess
For iPhoto '11 Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database and see if that resolves things
LN

Datasources from source system replicated as 3.x instead 7.x

Hello BI Gurus,
I am Basis consultant and got stuck with an issues with incorrect datasource version replication while trying to create and connect to ECC source system.
Generally they are replicated as 7.x but this time for some strange reason it is replicated as 3.x.
We tried RSDS to do mass migration even though we would loose DTP etc but that didn't work.
We deleted and recreated the system which also replicates the datasources as 3.x.
The source ECC system is refreshed from production so does the target BI system.
This is the first time we connected specific ECC system to BI system.
BI system has multiple ECC system as source system connected to it.
Please help me asap as our development is on hold since long.

After making the copy, did you guys run BDLS to convert the former Production Logical System Name to the new name for the ECC environment and did that also to convert the former BW Logical System Name in the new ECC environment to the one it will be connected to?
If you wanted to use the same IDoc Types you were using in the original system you could use function modules RSAP_BIW_DISCONNECT and RSAP_BIW_CONNECT to disconnect the old reference and connect the new one specifying the same IDoc Type... You should do the same in BW and check table RSBASIDOC to confirm.
But yes, part of the definition of the Datasources, once you convert them is the logical system name... If it is different from the original all datasources get replicated as 3.x to maintain compatibility... At least that's what I've learnt...

How to recover a datasource from source system

Dear Experts,
i am trying to find a datasource(0PS_PRJTYPE_ATTR) in the source system. For some reason, I could only find the text one, not the attribute one. I checked in RSA5, RSA6 and RSA2. I couldn't find it.
What are the possible ways to recover the datasource, not sure if someone has deleted it.
Its really urgent, Please guide me.
Regards
Shanthi

Hi,
The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
Regards
Venkata Devaraj

How to eliminate few subelements from source pay load structure

Hi,
     I have requirement like this, there are 4 sub elements in the source structure, but I need only 2 sub elements in the target structure. The following is the source pay load,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns9:MTI_MANU_PROMOTION xmlns:ns9="http://limited.com/usa/Sap_appl/SapRetail/PromoPriceZone">
- <RECORDS>
          - <UDT_PRICELOCZONE action="INSERT">
- <access>
                    <LOC>0000000003</LOC>
                    <U_PRMOPRICEZONE1>EVENT1</U_PRMOPRICEZONE1>
               </access>
- <access>
                    <LOC>0000000009</LOC>
                    <U_PRMOPRICEZONE1>1</U_PRMOPRICEZONE1>
               </access>
- <access>
                    <LOC>4323</LOC>
                    <U_PRMOPRICEZONE1>1</U_PRMOPRICEZONE1>
               </access>
- <access>
                    <LOC>0000000008</LOC>
                    <U_PRMOPRICEZONE1>1</U_PRMOPRICEZONE1>
               </access>
          </UDT_PRICELOCZONE>
     </RECORDS>
</ns9:MTI_MANU_PROMOTION>
So how to eliminate other 2 sub elements in the source structure?
Any one with better suggestions, about this idea?
Thanks in advance for all.

Hi
raju jut check LOC exists with the help of exists functionality (node functions)
Use this for input for ifwithout else(boolean function)
And use your access node as a input at "then"
I hope you will get the output.
Check your other thread regarding http sender.
Regards
Piyush.

Wanting to retrieve ONLY A FEW photos from itunes backup without restoring entire backup, is this possible?

I have a few photos on my latest backup to my computer through itunes that i would like to retrieve. I know its there as the latest backup was a month ago and i had these photos a month ago. I want to be able to recover them without having to restore my entire ipod and without having to recover all the photos, any tips?

If the device had been used as designed, pictures taken with the device would be regularly copied off the device to a computer for safekeeping. As such, there would be no need to recover them from a backup.

Transport Datasources from Source

Hi Experts,
My requirement is to transport datasources, enhancements etc from CRM dev to CRM qa as they are stored in package $TMP I donot want to miss any objects in transporting from dev to qa. would anyone explain me how to collect each and every object thatis datasources, enhancements etc from $TMP and move into Zpackage. I appreciate it in advance.
Thanks and Regards
AKReddy.

Hi,
Try to collect all the dependent objects manually and when you try to transport it, it will ask for a request qherein you need give the package name first and then create a request and transport it.
Hope this helps
Assign points if useful
Regards,
venkat

File content conversion only 100 characters read from source..

Hi,
In my case I have a sender channel with file content conversion set as follows;
Recordset structure : Record, 1
sequence: ascending
Key field type : String (case sensitive)
record.fieldseparator : 'nl'
record.fieldnames : Data
ignorerecordsetname: true
Idea is in ECC, when a custom program is run, it reads the shipment data and builds an xml file with data in various nodes like;
<shipmentId>6767667</shipmentId>
<DelvText>hjysks sag fhdososlhfiof </DelvText>
Now all this data is converted to a single string entry under tag called <Data> and passed on to the third party system by PI using above conversion.
And the resulting file will have all the data like this;
- <Record>
<Data><?xml version="1.0" encoding="UTF-8"?></Data>
</Record>
- <Record>
<Data><ShipmentId>6767667</ShiomentId>.........</Data>
It so happens that the data that is populated in the <DelvText> by the program is lost during conversion. I get only first 100 characters in the resulting above mentioned XML after the file content conversion happens. rest of the string is lost. I can see all other data perfect except for this long text.
This is the data I enter in the delivery's header text under shipment instruction field. I debugged the program and see that the entire text is indeed filled but gets lost after the file conversion happens !!
What can be the reason ?
thnks

Stefan, I appreciate your concern, thanks. But this is an already working interface and I cannot change it and can only assist with minor data mapping changes and troubleshooting such issues.
Scenario is simple, ECC has to send shipment data to third party via PI.
The shipment data has to be sent as an XML file with a single <Data> tag as I showed to you earlier.
It is so weird that when I type my delivery text less than 100 characters I can see that in full text in my XML file but only when the text is more than 100 characters, the XML has only 100 characters and it is passed to the third party like that and so third party is consdering this as incomplete info.
Would help if you can think and let me kjow what may create this kind of an issue or if you can point me where to look for issues.
thnks

Iphoto & Time Machine: Restore Only a few pictures from an Event?

Several month ago I trashed an event (and emptied Iphoto Trash). Now I would like to get that event back with those photos.
I back up every night with Time Machine so I know months ago that specific event and photos should be located. What is the best and easiest way to find that event and collect it again? Can I "browse" the TM files to find it? or am I better entering TM to find it?
Thanks for any help you can provide.
Skip

Click to view full size
OT

How to: Replicate datasource from an ABAP

Is it possible to replicate one or more datasources from within an ABAP? Which ABAP would that be?

Hi dear,
try with FM RSAOS_INT_METADATA_UPLOAD...
Hope it helps!
Bye,
Roberto

Show only subset of labels from a data series

I'd like to show only a few labels from a given data series. I saw some work-arounds posted from 2010 (e.g., add a new series with just the items to be labeled; turn off all labels on original data series). Was wondering if it's possible to deal with each series-label individually now, thereby avoiding having to add extraneous series to my data.
Thank you.
B.

Thanks, Jerry. Very curious --- when I hide rows on my original table, those data aren't removed from my chart. So I built a new chart with new data and hiding rows on this new table does indeed remove those data from the chart. So something seems to be happening with my original data table.
But this is actually separate from what I was asking about. I'd like to keep all the columns in my chart and just have a few labeled. Was seeking a way to do that without adding a "For Labeling Only" column to my table (Excel let's one deal with column labels individually; figured Numbers might be able to do that, too). Here's how the workaround looks:
Thanks again for responding.
-Brian

BAPI execution in webdynpro returns only a few records

Hi,
I'm executing a BAPI in my webdynpro application and it is returning only a few records from backend table. When i execute the BAPI in R/3 with the same input i'm getting all the records. In webdynpro i'm getting only 22 records for different set of inputs while in R/3 i'm getting all records(37,41 etc). Any help in this regard will be valuable.
Regards,
Shabeer

Hi,
I am invalidating the output node after execution of BAPI. The BAPI is executing properly and it is returning records also.But the problem is with the number of records returned by BAPI. As i've mentioned earlier it is always returning 22 records, eventhough the actual output contains more than 22 records(I checked this in R/3). I was told that the BAPI is calling a transaction(i don't know whether it is the problem since i am not familiar with ABAP and R/3 that much).Is it possible that webdynpro is fetching records even before the BAPI execution is complete in R/3 and hence returning partial output(I'm not sure about this thing) ?
Any help in this regard will be valuable.
Thanks and regards,
Shabeer

How to burn only a few tunes in playlist?

One thing's puzzling me please, in itunes I am trying to burn only a few songs from a playlist but I am not seeing the option to do when I right lick on the selected songs. Will itunes burn only an "entire" playlist?

mikehende wrote:
One thing's puzzling me please, in itunes I am trying to burn only a few songs from a playlist but I am not seeing the option to do when I right lick on the selected songs. Will itunes burn only an "entire" playlist?
Start a new playlist, and put only the songs in it that you want to burn.

Replicate only a Few Datasources from Source sys

Similar Messages

Maybe you are looking for