Replicate partner funtion from R/3 to CRM

Hello Experts,
We have created a new partner function in R/3 system ( ZC ), and we need to replicate it to the CRM system.
I already ran the CUSTOMER_REL object but it doesn't replicate the ZC parter function.
Could you please tell me how we can do this?
Thanks,
Susana

I had already did the configurations that you had sugested me, but It doesn't worked.
Now I've another issue. I tried to replicated again the CUSTOMER_REL object, and I get the following errors:
"Partner number 0000023283 is already assigned to a contact partner relationship
Message no. CRM_BUPA_MAPPING217"
"Technical error occurred (7)
Message no. BUPA_MW_EXCHANGE103"
Do you have any sugestion for this?
Thanks

Similar Messages

How to replicate material master from R/3 to CRM

Hi guys,
I am trying to replicate material master from R/3 to CRM using BAPI_MATERIAL_SAVEDATA but no changes are getting replicated to CRM.
Any help..??
Thanks,
Sid

Hi find below for the product cat
Steps to create the product category in SRM:
1)       Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2)       Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3)       Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Replicate customer contact from R/3 to CRM

All,
here is the scenario
I have downloaded customers from R/3 to CRM. Now I'm trying to download the contacts in customer account to CRM. When I go to relationships in CRM, I should be able to view the same contacts in R/3 for this customer
Settings
In CRM customizing data transfer setting for partner processing, I have AP already selected.
In R/3 there is no partner function assigned/ created for this customer but have a contact.
I tried to replicate this with Customer_Rel object KUNA1 table -- but didn't work
I tried to with the same object with table KVNK only for one single customer. It has been processing for ever...
I want to create the contact with the same number as BP instead of having different number for contact person.
Can someone please help me !!!
Thanks,
Sri

Ensuring that the number range of contact person is same in both R/3 and CRM - OSS note 564538.
Create function module : Z_CHANGE_CONTACT_GROUPING copying BUPA_MWX_BDOC_MAP_MAIN_CENTRAL
I hope this helps.
Gaurav

Business Partner Replication from R/3 to CRM

Hi,
I am trying to replicate BP (eg 891151) from R/3 to CRM. While replicating Error segment in T.Code SMW01-Display BDocs shows that industry AXALTO is not maintained.
I was searching this in Table TBRC in R/3 but says No table entries found.
But the same Industry is attached to the Customer in XD03 in R/3 in field Global Account.
My doubt is, the particular field (Global Account) is having a search help and it is allowing a data which is not maintained in master data.
Whether is it possible ?

Hello,
You should ask this kind of question in this SAP CRM: Webclient UI - Framework.
Check if you execute the initial dowload of adapter object DNL_CUST_TBRC.
Regards,
Fred

Problem with Business partner flow from R/3 to CRM

Hi,
We are setting up a process to flow of Business Partners from R/3 to CRM.
We have configured PIDE correctly but the problem is when I am creating any customer in R/3 we are getting DUMP.
Kindly help me in this regards.
Thanks

Hi,
Check out the following Middleware Configuration :
     <b>CRM Middleware configurations</b>
1.     Source client for Client copy
     Using t-code SCC3 in both CRM and ISU to get the source client used for client copy.      Get source client for profile SAP_ALL.
2.     RFC Destinations
     Use t-code SM59 and check if the following RFC destinations have been created:
     CRM
o     R/3 Destination for CRM e.g. CRTCLNT240
o     R/3 Destination for ISU e.g. ISTCLNT240
o     Logical Destination for Middleware R&R queues one for current client and one for client 000.                                                                            e.g. SAPCRM_MW_RR_240, SAPCRM_MW_RR_000
o     TCP/IP Destination for IPC dispatcher e.g. IPC_RFC_DISPATCHER
o     TCP/IP Destination for IPC server e.g. IPC_RFC_SERVER
     ISU
o     R/3 Destination for CRM e.g. CRTCLNT240
o     R/3 Destination for ISU e.g. ISTCLNT240
3.     Logical Systems
     Using t-code SALE check if the following logical systems have been created:
     CRM
o     Own logical system e.g. CRTCLNT240
o     Logical system for ISU e.g. ISTCLNT240
o     Logical system for source client used in client copy e.g. CRTCLNT200
     ISU
o     Own logical system e.g. ISTCLNT240
o     Logical system for CRM e.g. CRTCLNT240
o     Logical system for source client used in client copy e.g. ISTCLNT200
     Check if own logical system is assigned to the client.
     Path: Sending and Receiving systems -> Logical Systems -> Assign Client to Logical      System.
     Convert Logical System name in application tables
     Use t-code BDLS to convert logical system names in the application system.
1.     Enter old logical system name retrieved in step 1. e.g. CRTCLNT200
2.     Enter new logical system name e.g. CRTCLNT240.
3.     Select radio button Conversion of Client-Dependent Tables and execute the transaction.
This process needs to be carried out 4 times: twice in CRM and twice in ISU.
     CRM
o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
     ISU
o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
4.     Middleware Parameter tables
     Use t-code SM30 to maintain middleware parameters in following tables
     CRM
o     Table SMOFPARSFA:
     Change value for following parameter entry:
     Key - R3A_COMMON
     Para name - CRM_DEFAULT_DESTINATION
     Value - Old ISU logical system -> new ISU logical system
          E.g. ISTCLNT200 -> ISTCLNT240
     ISU
o     Table CRMRFCPAR:
     Delete the previous entry for the following key:
     User - CRM
     Object name - *
     RFC Destination - Old RFC destination for CRM e.g. CRTCLNT200.
     Load types - All Load Types
     Create new entry with following data:
     User - CRM
     Object name - *
     RFC Destination - New RFC destination for CRM e.g. CRTCLNT240.
     Load types - All Load Types
     In Queue flag - X
     Send XML No XML
o     Table CRMPAROLTP:
     Change value for following parameter entry:
     Para name - CRM_DEFAULT_DESTINATION
     User - CRM
     Value - Old CRM logical system -> new CRM logical system
          E.g. CRTCLNT200 -> CRTCLNT240
5.     Admin Console (Sites and subscriptions)
     Using t-code SMOEAC in CRM change attributes for the following sites.
     CRM site
o     Name: Change name from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
o     Description: Change description from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
o     Site attributes: Change RFC destination from old CRM RFC destination to new CRM RFC destination e.g. CRTCLNT200 -> CRTCLNT240
o     Click on get values button to refresh logical system details.
     ISU site
o     Name: Change name from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
o     Description: Change description from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
o     Site attributes: Change RFC destination from old ISU RFC destination to new ISU RFC destination e.g. ISTCLNT200 -> ISTCLNT240
o     Click on get values button to refresh logical system details.
     Check if ISU site is assigned to following subscriptions.
     All Business Agreements (MESG)
     All Business Partner Relationship (MESG)
     All Business Partners (MESG)
     All Business Transactions
     IS-U Connection Objects (MESG)
     IS-U Contracts (MESG)
     IS-U Points of Delivery (MESG)
     Product Materials (MESG)
6.     CRM Middleware Queues
     Inbound Queues:
I.     Execute transaction SMQR.
II.     Change AS group from DEFAULT to parallel generators.                Path: Edit -> Change AS Group
III.     Register following queues:
     CRM
o     CSA*
o     R3A*
     ISU
o     R3A*
Outbound Queues:
I.     Execute transaction SMQS.
II.     Change AS group from DEFAULT to parallel generators.                Path: Edit -> Change AS Group
III.     Register following queues:
     CRM
o     CSA*
o     R3A*
     ISU
o     R3A*
R&R Queues:
I.     Execute transaction SMOHQUEUE in CRM.
II.     Check if all queues have status Released.
III.     Start Queue Demon by clicking on Start Queue Demon.
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra

Replicate Sales Order from R/3 to CRM

Dear SAP CRM Gurus,
I want to replicate the sales orders created in R/3 to CRM . These order flow to R/3 from legacy system.
Please provide me the middleware steps need to be done for this. Also provide me other criteria required for replication to CRM,
like same number range , order type etc.
Thanks and Kind Regards
Tom

Hi Tom,
Check the [Best practice guide C03|http://help.sap.com/bp_crm70/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_DE.doc] for the details.
Hope this will help.
Thanks,
Vikash.

Replication Of Z Partner Functions from CRM to ECC

HI All,
We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
So can some onle please tell me how to do this?.
Thanks in Advance,
Arun

1. Create the partner function in ECC
2. Assign the partner function to the relevant partner procedure in ECC
3. Create a partner function in CRM
4. Map the partner function as follows:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from R/3 into CRM
Create the following entry:
Partner function in R/3 Function
and also the below:
Create a mapping entry for data transfer from CRM to R/3 via the
following IMG activity in CRM:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from CRM into R/3
Create the following entry:
Function R/3 function Type in R/3

Transfer Business Partner from R/3 to CRM

Hi All,
Can any one pls help me how to transfer business partner from R/3 to CRM system? If it can be done through ALE pls explain me the detailed step how to do it like wht message type should be used etc. If there are some other way pls let me know.
Thanks
Sathish

Check them out:
Replication of BPs from CRM to R/3
downloading partner functions from R/3 to CRM
Data exchange between R/3 and CRM 5.2
delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3
Reward Points if useful.

Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

Deactivate replication of contact persons from R/3 to CRM

Hi,
i'm replicating customer relationships from ECC6 to CRM2007. All fine, including z-partner functions etc.
One thing Im baffled by however is the replication of contact persons. Contact persons will be created in CRM only, without any integration/replication with ECC6. Since there are existing contact persons in the ECC6 master, I want to deactivate that replication.
So I hae deleted the mapping for master data transfer in CRM in the IMG under Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
and Distribution of Partner Functions from CRM into SAP ECC.
But if I create a contact person in ECC6, it STILL replicates through to CRM!! Any ideas how to de-activate that replication? I don't want to end up with failed BDOCs in the middleware if posible.
regards
Jens

Hi Srikanth,
thanks a lot for your reply. However the approach needs to be a bit more sophisitcated than that. I do replicate through a number of r?3 partner functions into relationships in CRM, e.g. ship-to and 3 z-functions (promary CSR etc.). That all works fine and needs to stay that way.
However I do need to deactivate the replication of the R/3 contact persons to CRM.

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Customer Master replication error from R/3 to CRM

Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JD

Pls see Customer Master replication error
Closed.

Download Z Partner Function from R/3

How to download a customer specific Partner function from R/3 to CRM.
Have done PIDE settings in R/3.
Have done number ranges and groupings in CRM.

Hi,
Which grouping you checked in CRM?
Have you check data transfer R/3-CRM and CRM-R/3
in tcode SPRO : CRM->Basic Functions->Partner Processing->
Data Transfer->Distribution Partner Functions from R/3 into CRM
CRM->Basic Functions->Partner Processing->
Data Transfer->Distribution Partner Functions from CRM into R/3
Hope this help
Gun.

Downloading business Partner from R/3 to CRM

Hi All,
Can any one pls help me how to transfer business partner from R/3 to CRM system? If it can be done through ALE pls explain me the detailed step how to do it like wht message type should be used etc. If there are some other way pls let me know.
Thanks
Sathish

Dear Satish
download of BP will be done from CRM to R/3 will be done and from R/3 to CRM it will be upload
and this process is done through middleware with adaptors and plug ins which build relation b/w R/3 and CRM servers
and before downloading we have to do fielsmaping i.e. which fields are mandatory, optional, that too b/w account group og R/3 and BP role of
CRM this is the process
it requires basic settings and there r two types of downloads they are initial and delta downloads initial is one time activity and delta is ongoing activity where ever u create customer in R/3 it should replicate in CRM and the same case with CRM to R/3
still not clear pls send me an mail on [email protected]
I can share more derails with u
if useful pls award points

Error when replicate sales order from crm to r3

Hello Guys,
When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01:
queue name: R3AD_SAL_ERR
error1:
Please enter sold-to party or ship-to party
Nº mensagem VP112
error2:
Sales document XXXX was not changed
Nº mensagem V4219
Any idea, why this happens?
Mary

Hello guys,
I have solved my problem by my own.
The problem was in the distribution of partner functions from crm to R3 (spro -> CRM->Basic Functions-> Partner processing->Data Transfer-> distribution of partner functions from crm to R3).
The partner functions assigned to sales orders in R3 was the AG, WE, RE and RG, and in the CRM was SP, SH, BP, PY, the partner functions map wasn't correct
I have had to map the correct partner functions between crm and r3. I have put in CRM the same partners functions that R3.
Best regards
Mary

Replicate partner funtion from R/3 to CRM

Similar Messages

Maybe you are looking for