Replicate shadow effect in Illustrator

Hi All,
I'm trying to replicate a logo for a client that was created by another designer, and I haven't been able to figure out how to recreate the drop shadow on the type.
Here's the logo:
When I use the Drop Shadow effect in both Photoshop and Illustrator, the shadow always pulls away from the type. I've also tried using the 3D Extrude & Bevel effect in Illustrator, but it always comes out looking much "rougher" than in the image above. (I'm self-taught, so please forgive my ignorance.)
Any ideas? Thanks in advance for any suggestions...
Sam

Silkrooster wrote:
Ok, I see what's going on or sorta anyway. The bottom two images are using a shadow that is parallel to the original object. The top is done with a perspective.
Well I did a bit of playing around and I think you just needed to rotate the text a bit more.
Thanks Silkrooster. You've definitely captured the look of the original, albeit with a much narrower drop shadow. Can you provide the steps you took to create this effect (or at least the major steps), and let me know if you think it would work with a wider shadow?
Sam
JETalmage wrote:
This very common text treatment, dating back to way before computers, is not a pre-built effect in Illustrator. (It's a simple, single, clickdrag affair in Corel Draw.) Don't fake it with a Blend or with 3D Effect. For cleanest results, construct it yourself as proper tidy paths. See this PDF for one method.
JET
Thanks JET. While the techniques in the document you referenced would work, they would take quite a bit of time (for me, anyway) for this logo, so I'm hoping to find a simpler solution.
Sam

Similar Messages

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate?

How do I include a drop shadow effect when I import an Illustrator vector into Edge Animate? It should be noted that I also have another effect (an extrude & bevel) applied which does copy over when I paste (or create an SVG and import) into Edge Animate. Any thoughts on why the drop shadow disappears but the extrude & bevel carries over?

Which version of Illustrator are you using?
In earlier versions of Illustrator it is not that easy to apply drop shadows with spot colours.
Another reason why it's always important to tell which version of AI … well …

Shadow effect website

Hello all,
how can I create a shadow effect on the left and right sides of my main div using Illustrator web document, without using the drop shadow effect.
With kind regards.

Two narrow vertical rectangle shapes filled with a subtle gradients
like such When Place on the web you don't see the document outline so it is more subtle
In a Browser

Blur control disabled for Drop Shadow Effect and Filter

Win2k Pro
2GB Ram
AICS 11.0.0
This is odd: the blur control in the Drop Shadow Effect and Filter dialog boxes is disabled. It seems to me there was a time it was ENabled.
This is the situation for both vector and bitmap objects. I've played with Document Raster Settings.
Truth be told, I _did_ reinstall Illustrator last year and have not used it much since.
Any insights you can share?
Thanks

Please excuse this post ... didn't mean for it to appear as a reply under another post. My apology. lk <[email protected]> wrote in message news:[email protected].. >I purchased a vector image from istockphoto ... when I opened the file in > illustrator it is just an outline without color. I select the outlines > but > can't fill it with color! What am I missing? > > > > > > <[email protected]> wrote in message > news:[email protected].. >> Win2k Pro >> 2GB Ram >> AICS 11.0.0 >> >> This is odd: the blur control in the Drop Shadow Effect and Filter dialog >> boxes is disabled. It seems to me there was a time it was ENabled. >> >> This is the situation for both vector and bitmap objects. I've played >> with >> Document Raster Settings. >> >> Truth be told, I _did_ reinstall Illustrator last year and have not used >> it much since. >> >> Any insights you can share? >> >> Thanks >

SDK: Changing drop shadow effect properties

I have a text object that I've done Effect->Stylize->Drop Shadow... on.
Using the COM SDK for Illustrator CS6, as an Illustrator.TextFrame object, how can I access the properties of this drop shadow effect?

Hello again
Ahhh, okay. Gotcha!
The thing is, there is no drop shadow effect to configure. If there is such an effect, it's something that is simply part of the Text Animation that has been selected.
I think the icon is a bit misleading and is simply intended convey it's not just regular text. I don't believe the intent was to convey there is a drop-shadow associated with a Text Animation. There isn't. At least not without it having been programmed as part of the animation.
Does this help you answer the question? Are you actually seeing there is a drop-shadow effect during playback that you don't like or want? If so, you will likely need to choose a different Text Animation.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Drop shadow effect--I can't get it to stop!

So I have successfully used the drop shadow effect in PSE 6.
But I can't figure out how to disengage this effect. I started using the clone stamp tool after I was done with drop shadow, and now all of my clone stamps have drop shadows!
I don't want no more drop shadow. How do I get it to stop? I've looked and looked and don't see anything obvious. Thanks.

JimSned wrote:
Thanks! That worked.
But there must some way to disengage those effects after you're finished using them.
They usually don't hang around. I'm glad resetting the tool solved the issue.

Inner shadow effect and layers in PSE 9

Hi,
I was wondering if someone could assist me.
In PSE 9, I opened a photo>selected it>created a new layer and applied an inner shadow without a problem. However, when I selected the TEXT tool and wrote some text in a new layer on top of the photo and dropped a shadow and/or bevel on the text, the text appears blurry and the shadow effect doesn't look right. I tried the same effects on the text wihtout adding an inner shadow to the photo underneath and the text looked great. Any thoughts on what I am doing wrong?
Thanks!

Try right clicking on the T symbol in the tool box and choose Horizontal Type Mask Tool.
Then type your text and see if adding your layer style looks any better.

Shadow effect printing issue

Hi
I'm having an issue with the shadow effect that must be so simple to resolve because if its not I don't understand why this tool is available. I have created a text box which is placed over another colour area, typed my text, clicked on the shadow button in the toolbar and shadow is applied to my text. It looks fine onscreen, it looks fine when I export to pdf but as soon as I print it doesn't look fine. When printed the text box is filled with a semi translucent version of the colour below it. If I print the text box so that its not sitting on top of a coloured background there is no problem but if there is something behind it then the text box appears.
Hope that makes sense, I'm only a part time indesign user so I'm not as skilled as I'm sure many of you are so please help this me get past this really annoying problem.
Thanks
H

http://indesignsecrets.com/eliminating-ydb-yucky-discolored-box-syndrome.php
Bob

Exporting a PDF for print, the PDF does not show a shadow effect

I have a drop shadow effect on an EPS object and some type that does not appear when I export the file as a PDF for print. The settings I have it set to are: Adobe PDF Preset: "High Quality Print", Interactive Elements: "Include Appearance", and Color Conversion: "No Color Conversion".
If anyone could help me I would greatly appreciate it!

Will,
Yes, I set my transparency blending space to CMYK. It didn't work.
I don't have a particular reason I am using an EPS over AI other than that's the type of file this object (logo) was saved as. I can get an AI. Is there any particular reason you recommend not using an EPS?

How to achieve this specific drop shadow effect?

Dear all,
Does anybody know how to achieve this specific drop shadow effect in InDesign: a step by step instruction, a plugin, etc?
Regards,
Kasyan

Kasyan,
I generally just use the basic feather. I draw the object with a few clicks of the pen, fill with whatever color, set the tint if desired, then use settings more or less as below.
Mike

Drop Shadow Effect Cannot Be Seen

I'm using CS4 for Windows and I own several great books for it, yet I'm still struggling completing a simple drop shadow effect on a photo. No matter what I try from using the simple drop shadow fx or complex suggestions building several different layers, I never see the final effect on the photo. I even click and unclick "preview" but it makes no difference. The photo displayed in my CS4 window continues to look just like the photo when I first opened it. Am I supposed to flatten the layers or somehow bring them together into one layer?
I'm stumped.
I'd appreciate any help. I'm sure I'm doing something completely ignorant, but I'm willing to make myself look a fool to finally resolve this.
Again, thanks.
Regards,
Bob

The drop shadow appears on the transparent side of the opaque/transparency interface. You can't get a drop shadow on a totally opaque layer because there's no such interface. If you're working on the background, convert it to a layer or duplicate it and work on the duplicate. Select the object which is to cast the shadow and put it on its own layer (CTRL J). The area outside the selection will be transparent. Highlight that layer, double-click to the right of its name on the layers palette to bring up the layer effects dialog box. Select the drop shadow effect, and tweak the settings including opacity to define the shadow. While the dialog box is still open you can drag the shadow to any position. Once you close the dialog box, the object and shadow move together.

PSE 9 Shadow effect

Hello,
I applied a drop shadow effect on a photo.
How to change the direction and intensity of the shade??
thank you
Bonjour,
J'ai appliqué un effet d'ombre portée sur une photo.
Comment changer l'orientation et l'intensité de l'ombre ???
Merci

followup to my previous post:
If your PSE version does not have a built-in way to specify the drop shadow's intensity, here is a round-about way.
Note: this works only if the layer is not simplified; e.g., text layer or custom shape.
1. Ctrl-click the object layer to select just the object (minus the shadow).
2. Copy/Paste the selection to a new layer.
NOTE: if the object was created from the shapes toolbar (Rectangle, Custom Shape, etc.), Ctrl-C will not work (Edit>Copy is grayed out). In this case you must do Edit>Copy Merged, or Shift-Ctrl-C.
3. Ctrl-click the new layer to select the object.
4. Simplify the original object's layer and delete the selection, leaving just the shadow.
5. To lighten the shadow, make a Levels adjustment and move the black output level slider to the right.
To darken the shadow, duplicate the shadow layer. Multiple duplicates darken more each time.
To change the shadow color, Ctrl-click to select the shadow and fill with your color. To later change the color, add a Hue/Saturation adjustment layer above the shadow layer.

Unwanted shadow effect?

Hello Acrobat Forum:
I've had an annoying problem with PDF created from InDesign CC for months now, and I can't figure out what's wrong because it seems intermittent, and I can't narrow the variables to figure out when it's happening or why.
Sometimes, a PDF I create from InDesign has an unwanted shadow effect under much of the text, and the colors come out dull and darker. Here is a screenshot of the same PDF file exhibiting the problem and one that does not exhibit it.
Oftentimes, I will export a PDF and it's fine, but then I'll edit something and re-export it, and from that point on, any number of exports to PDF will result in a drop-shadowed file. The drop shadow effect is present at all view magnifications except extremely zoomed in (~1600%)....then it goes away, but the colors are still too dark.
When I export PDF, I am using the same preset I've created each time (including the same ICC profiles), but the results can vary for some reason....
NO PROBLEM:
PROBLEM:
I did manage to find a small discussion about a similar problem, and the suggested solution was to use "Gracol" as the ICC profile the PDF is forced to use during export. That is not a good solution since many times, people I send files to for review will preview PDF attachments in web-based email browsers whose PDF plugins don't support anything but sRGB....
Any ideas what is causing this problem? Or, when it occurs and when it won't? Or, what solutions there might be?
Thanks for reading!

bump

Shadow Effect for a Truck

Desperately looking for some expertise!
I need assistance in creating the shadow effect underneath a vehicle and its tires. I have hunted through as many books as I can find and even looked at the D&D in the current issue of Photoshop User but I'm having no luck (yes I am a novice)!
This is for an ad for a fire truck that I am doing for a national publication and I have to get it right! If this is really difficult can you suggest someone in Central New Jersey that may be able to assist.
Thank you,
Rich
ps: I am using CS3 on Windows XP.

G'day Rich
It might be an idea to look at some vehicle pictures to get an idea of the shape of your shadow.
You would then make a selection of the shape and put in on a seperate layer behind your vehicle picture. (vehicle picture would have to be cutout i.e. surrounded by transparency)
Then fill this selection with the colour of the shadow, this colour is often not grey but is best selected from the colour of a real shadow. Then blur it (filter > blur > gaussian blur) then add noise (filter > noise >) and finally change the blend mode of this layer to something like multiply, this effect will depend on the actual colour of the background you are using.
There are other ways to do this as always in Photoshop.
Sometimes the actual shape of your vehicle layer could be used to make the selection and then transformed but this doesn't always work.
If you could post a pic it might help to better advise.
My very first ad was also as a novice for a worlwide travel magazine! so good luck with this and don't be put off by unhelpful comments!
regards
John

Shadow Effect Not Publishing in Slideshow

I have set a shadow effect on the Hero image box that does show in the design mode of MUSE.
But when I preview it in MUSE, preview it in the browser and when it is published, the drop shadow is gone.
Any suggestions?

Sam Valenti wrote:
How do I stop the Shadow effect on test in iMovie 6. ..
you can not switch-off the drop shadow.. it is intended by Apple to make titles more readable.. (imagine a light yellow title on some bright white background.. )

Replicate shadow effect in Illustrator

Similar Messages

Maybe you are looking for