Replicate Vendor and Contact Person from SRM to ECC

Hi Expert,
I'm using SRM 7.0 and ECC 6.0 and using extended classic scenario.
any required to replicate vendor master and contact person from SRM to ECC, when we create vendor and contact person in portal, the result should display in SRM and ECC.
My question, Is it possible to replicate vendor and contact person from SRM to ECC? If possible, can you guide me?
Thanks and Regards,

Hi,
sorry..
this problem solved because our client change the business process.
we open screen ECC in portal SRM.
Thanks...

Similar Messages

Email notfication for Customer and Contact person Created In CRM to the User

Hi All,
In one of my requirement, when a customer and Contact person is created in ECC or CRM a Mail should send to the user who created. There is
middleware setting between ECC and CRM. Mail Should trigger in CRM system only.
I know to trigger email for transaction data using Action Profile.
Could any One guide me to trigger email notification for Master data (Business Partner).
Thanks in Advance.
Regards
RR Pradhan

Good afternoon Pradhan
1.I think it would normally be done through a mini wf which should start on event "partner created".
Your wf should have another step with a custom method to determine the email address and feed it to a container. You would then use this container in a subsequent email step with recipient type "email address".
2.In the case of actions I think you should use as processing time the option : Processing using the Selection Report (Action Monitor) (tnx sppfp)
As processing type you should probably have a method that sends an email.
Most likely the recipient email address should be determined in the same method by reading the attribute BusinessPartnerERM.CreatedBy.
In the scheduling conditions you could use the standard attribute BusinessPartnerERM.CreatedOn, in a combination like BusinessPartnerERM.CreatedOn = Today () ;
Hope this helps.
Regards
Razvan Zainea

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

Replicating vendors from SRM to ECC

Hi All,
We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario.
We have a requirement where we want to replicate the vendors from SRM to ECC.
I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but are there any standard programs XI/PI interfaces that are available for replicating vendores from SRM to ECC?
Please share your thoughts....
Thanks in advance!

Hi Jack,
Unfortunately I don't have a config guide for it. Can you speak to your XI/PI consultant and just ask him to configure this scenario in XI/PI.
PS: Before this you should import all SRM related business content in your PI system.
Regards,
Nikhil

FM to fill activity partner and Contact person inside a BADI

Hi,
When i create an activity i need to check for a condition and process the activity accordingly. The condition is that when an contact person is entered mistakenly on the activity partner field then i need to move to the contact person field and also find out the corresponding activity partner and fill it.
For example, if i enter 123( assuming this to be a contact person) on the activity partner field, then i need to find what is the corresponding activity partner for this contact person(Assuming ABC to be the activity partner). I need to fill ABC on the acitivity partner field and 123 on the contact person field. I tried using ORDER_SAVE Badi for the same. The badi gets called and i am able to read the curent value from ORDER_READ FM. I just don't get as to how to fill the activity partner and contact person inside this BADI. I am not able to find any FM for the same. Can i request some help pls?
Thanks,
Venkat

Hi,
maintain the partner change on document manually and debug this FM to see what should be the inputs.
Maybe you are missing sth.
Other way, better, would be using crmv_event tcode. there you can register your FM that will change partner on document.
you can assign this FM for eg. to event AFTER_CHANGE and object PARTNER, and transaction category like Service Process.
you can read /people/radoslaw.stefaniak/blog/2009/12/16/crmvevent--what-is-it for more information.
Regards

FM to Delete Position and Central person from org unit?

Hi
In SRM, we used tr-cd USERS_GEN to create position/CP using SU01 user.
In transaction PPOMA_BBP we can see Org unit assigned to position(S) and Central person(CP).
How to unassign or delete the Position and Central person from org unit?
Can you pls tell me any Func Module available.?
Regards
Chandra
Edited by: princeck on Mar 10, 2011 2:54 AM

Hi
HR_CENTRALPERSON_DELETE is working fine.
Can you tell me how to delete position from Org unit. I want to delete it using FM or program.
How to execute this program BUPA_TEST_DELETE?
I gave Business partner as input, but it does not delete...anything. pls guide how to exeute.
Any FM available.
Regards
Chandra

Email notification is not send to contact person in SRM 7.0

Hi Friends,
        I am in SRM 7.0 and SP03. I am using program '/SAPSRM/OFFLINEAPPROVALSEND' to send notification to approver.
             Email notification is not sending to contact person in SRM 7.0 after all approvers approved the shopping cart. I even enabled checkbox 'Approval of application object' for Contact person (in most cases, the creator of the document) in the SPRO-SAP Supplier Relationship Management-SRM Server-Cross Application Basic Settings-Business workflow-Process-Controled Workflow-Business Process Configuration-Define Recipient of Notifications. Am i missing something or is it how SRM 7.0 Build. I knew that this functionality is there in SRM 5.0 by activate the security level in the user settings(SU01), I also know that this setting will not work if we use Process control workflow. Any input on this..
John.

Hi Masa,
   Thanks for your input. I maintained the below entries but still it is not working. creator is not still receiving approved Email once the shopping cart is fully approved.
1 .SPRO-SAP Supplier Relationship Management-SRM Server-Cross Application Basic Settings-Define Transaction Types -
    BUS2121 - SHC - Event Schema as SC.
2. I enabled all four check boxes in this path Define Recipient of Notifications - approve shopping cart - contact person ( in most
    cases, the creator of the document ) .
But I don't know how to maintain or what to maintain for Define Event Schema. This will be highly appreciate if you share your great experience on this..
Hi Masa,
   I got approved Email after 10 mins. I don't know is this how the standard email send to requestor any idea how to change this? I found the Standard task that mail is sending
Document 1000001212 approved
WF-BATCH
to:
XXXXXXX
08/12/2009 03:35 PM
Show Details
Document 1000001212 approved
The document 1000001212 of type BUS2121 was approved.
Technical information:
Event:#APPROVAL_PROCESS_DOC_APPROVED
SubCat:#APPROVAL_RESULT_NOTIFIC_NEW
The following messages have been triggered by the system:
You can view the document directly. Choose the following link :
Login
   I am facing another issue that the Email is having a PORTAL link (Login text above is basically a link), when i click and after login into portal a pop up is displayed 'The specified transaction mode is not allowed with respect to workflow status of current document'. any idea about this issue?
John

How to replicate PO from SRM to ECC

Hi all,
I'm new to SRM.
I work on SRM 5 and ECC 6.
I have to configure the extended classic scenario for replicate PO from SRM to ECC.
Can anyone give a step by step guide/support for this configuration?
thanks in advantage
enzo

Hi,
Please use the search feature of this forum to get the configuration tips
Kind regards,
Yann

How to get list of FMs while creating Contact Person from User Admin Link

Hi Experts,
We are implementing SAP ECommerce for my SAP ERP. In one of our requirements, we need to develop MASS UPLOAD program which will take input as Contact Person's first name, last name, address and authorization details and create new Contact Person as it is done through User admin link.
To develop above tool, I want to trace all the Function Modules which are called while creating new Contact Person from User admin link.
Please provide your inputs on how I can get the trace of FMs.
Thanks,
Keya

Hi Keya,
For a B2C eCommerce solution, you are looking at FMs BAPI_CUSTOMER_CREATEFROMDATA1 and ISA_USER_CREATE and the table USAPPLREF which holds the reference to the customer and user.
To get the FMs called, you would have to do a session trace during B2C user registration / B2B user creation from UME. You could search this forum on a 'how-to' for doing a session trace or lookup the development and extension guide that provides a lot of useful information.
Cheers,
Ashok.

Activation of BP and contact person

Hello Experts,
I want to know what is the procedure of activating the Business partner and contact person in IS-Media in ECC6.0. In ECC6, SAP has already given this facility so no need to execute any program but if I want to upgrade from 4.6c TO ECC6 then first we need to convert the customer to BP.
Please help me to know the procedure.
Thanks,
Shyam

If you want to use the business partner functionalityand migrate all your customers to business partners, you can not directly upgrade the system from 4.6C to ECC 6.
1. Upgrade SAP either to 4.7 or higher.
2. Goto t-code [JUPART] and execute all the reports one after another from top to bottom. These should be run only after completing the business partner configuration in SAP.
3. By running all the reports, the customers are migrated to business partners
4. Now upgrade the system to ECC 6.
Hope I am clear enough

How come calendars and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

How come calandras and contacts vanish from iPhone after upgrade to iTunes 6.1.2?

Hi, Did you work out a fix for this? All my calender dates (past & future) and the last 12 months of new contacts gone!!!! And yes i too back up regularly.
Previously when the great 5 upgrade happened, i did loss everything, and although I was doing backups none of that info was relative in an English way. A whole life of important, unreplaceable information gone! Never to be found.
All of my products are apple, but it seems that little people dont matter to them, with no recourse for the damage to my personal or professional life.
Extremly disappointed again!

Searching in business partner master data (properties and contact persons)

Hello,
concerning the need of a customer i am asking for a optimizing of the search in business partner master data.
It should be possible by a soon coming patch to have the tabs properties and contact persons available in the search modus.
I hope this is a functionality which SAP looks on like a nice and essential function, too, and can integrate this in a soon coming patch.
The customer is running SAP B1 2005A PL39
The same funktion concerning the properties would be great at the item master data.
This post is concerning the sap support message 842328 / 2008.
Thank for assistence in solving this nessaccary issue.
Michael Hubenschmid
MTF Schaffhausen AG
Edited by: Michael Hubenschmid on Oct 8, 2008 4:18 PM

Hi Susana,
The current system maximum properties are 64. You cannot define more.
However, as an alternate you can check the "Group" in the Business Partner Master Data and then can define different Properties for different Group of Business Partners.
Check this if any help in your case.
Regards,
Jitin
SAP Business One Forum Team

PCUI - Different Text type for Accounts and Contact Persons

Hi All,
While configuring the Text Determination, how can we have different determination procedures for Accounts and Contacts. On the CRM back end side there is no distinction on the objtect type for account & contacts. Instead there is one for BP.
We defined a Text Det Proc for Object BUT000 (Business Partners) which gives us the same text types in both accounts and contact person screens in PCUI. But we want different text types. Can any one please advise.
Thanks in advance,
Raj K

Hello All,
Any suggestions in this matter would be greatly appreciated. Thanks,
Raj Kasa

Creating activity without referencing Account and Contact Person.

Hello Experts,
Our client has such a process, sales employee can perform unplanned visits and they record this visit just entering this prospectsu2019 telephone number and name surname.(without entering account ID as the customer data hasnu2019t been created yet in Sap CRM) They require this in SAP CRM as well.
I have been looking for a way how can we manage this. When I create a visit the system asks for Account ID and Contact Person ID. My question is that is it possible to create a visit in SAP CRM without indicating contact person and account.
Kind regads,
M.

Hello!
Every activity in CRM must have activity partner, but you can make this fields non mandatory in CRM - Master Data - Organizational Management - Organizational Data Determination - Change Rules and Profiles - Maintain Organizational Data Profile
Best regads,
Artur Litvinov.

Search Help for employee and contact person

Dear expert,
I'm a BSP fresher. We are using CRM 7.0 now. I'm facing a BP search help pop-up window issue, please help on it.
We need a search help pop-up window to search employee and contact person at the same time.
Our user want to search both employee and cantact person (don't include custoemr ->sold-to-party) for activity responsible person. I know the sap standard search help components are different employee, contact person, account.
For example: employee -> BP_EMPL_SEARCH (component); contact person -> BP_CONT_SEARCH; account -> BP_ACC_SEARCH_E. And the component BP_HEAD_SEARCH is for all BP.
It seem that there is no search help component for employee and customer contact person combination. I think maybe we can do a filter by BP role. But I don't how to implement it on WebUI.
Thanks and Best Regards
Michelle

Hi Michelle,
You can create a search help using trx. SE11 and use it in the METHOD GET_V* of your componen/attribute.
in the get_v* method, * means attribute name put this custom code.
DATA:
w_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
t_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
t_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
w_map-context_attr = 'STRUCT.ZRESP_FASE'. " Attr name
w_map-f4_attr      = 'PARTNER'.                     "import/export parameter to search help - search help attr name
APPEND w_map TO: t_inmap, t_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'PRP_BUPA_EMPLOYEE'   "search help name in your case Zname
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = t_inmap
      iv_output_mapping           = t_outmap
      iv_trigger_submit           = abap_true.
Hope this helps!
Best regards,
Caíque Escaler

Replicate Vendor and Contact Person from SRM to ECC

Similar Messages

Maybe you are looking for