Replicate win server 2008 r2 with win server 2012 r2

I have AD on win server 2008 R2
Can I replicate it with win server 2012 R2
Nagy Anwar

Hello,
there is no problem to add a new Windows Server 2012 R2 into the existing domain.
http://blogs.msmvps.com/mweber/2012/07/27/upgrading-an-active-directory-domain-from-windows-server-2008-or-windows-server-2008-r2-to-windows-server-2012/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Similar Messages

Mouse not working in Virtual machine (win2k3 32 and 64 bit) on Windows Server 2008 RC1 With Hyper-V Technologies

I have installed two virtual machines(win2k3 32bit and win2k3 64bit ) on Windows Server 2008 RC1 With Hyper-V Technologies (Beta) enterprise. Mouse is getting lost inside VM (using CTRL+ ATL + LEFT ARROW comes mouse control control in host OS).
Is there any setting to make mouse works? Insert Integration Serice setup Disk operation succeeds.

all credits for mike_something
The problem is that the old mousedriver is hooked to the mouse device class.
To remove this dependency, go into the registry and navigate to the key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318}
Remove the value msvmmouf from the UpperFilters Regvalue.
Reboot....
tadaaa!!
If you wish you can take out the drivers completely by deleting these registry hives completely :
The driver:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\msvmmouf
The Service:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\VPCMap
The CopyHook Shell Extension: ( for folder access )
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{30C14BA C-122C-42ED-B319-1139DBF48EB8}\InProcServer32
HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandle rs\VPCCopyHook
After a reboot you can delete the "Virtual Machine Additions" folder from program files...
Good Luck!

[Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
Analysis
Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report:
Figure 1.
In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
Produces
You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
1. Upgrade to Windows Server 2012 with a GUI mode
1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
2) Select the operating system you want to install with a GUI mode.
We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
Figure 2.
Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
Figure 3.
After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
Figure 4.
2. Switch the GUI mode to Server Core
Method 1: Using Server Manager
1) Open Server Manager, click
Manger and select “Remove Roles and Features” to start the
Remove Roles and Features Wizard.
2) In Features,
uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
Figure 5.
Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
Figure 6.
Method 2: Using Windows PowerShell
There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
“Import-Module ServerManager”
“Uninstall-Windowsfeature Server-Gui-Shell –Restart”
or
“Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
Figure 7.
More information:
Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
Windows Server Installation and Upgrade
http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

Hi all,
I got some problems with update deployments these days.
I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
I did a deployment on this collection using this new Software Update Group.
I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
But there is no updates installed or displayed in Sofwtare Center.
Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
Thanks for your help.

Hi,
Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is DTS supported in SQL server 2008 R2 with Compatibility level 100?

We have a DTS package which executes one stored procedure.
We have recently switched SQL server compatibility level from 80 to 100.
On Compatibility level 80 it was working fine.
When i switched the level to 100, and executes DTS it shows successfully executed but stored procedure doenot really executed.
When i execute stored procedure in query analyzer it executed successfully and results were as expected.
Please let me know Is DTS supported in SQL server 2008 R2 with Compatibility level 100?

We have just implemented DTS packages on SQL2008R2 using the Backward Compatibility Tools (serarch for SQLServer2005_BC.msi)
You need the files:
SQLServer2005_BC.msi or SQLServer2005_BC_x64.msi
and SQLServer2005_DTS.msi
After you install these, perform the following -
1) To integrate DTS Designer with SSMS:
Copy the files SEMSFC.DLL, SQLGUI.DLL, and SQLSVC.DLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn
to %ProgramFiles%\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE
Copy the files SEMSFC.RLL, SQLGUI.RLL, and SQLSVC.RLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn\Resources\1033
to %ProgramFiles%\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Resources\1033
2) To integrate DTS Designer with BIDS:
Copy the files SEMSFC.DLL, SQLGUI.DLL, and SQLSVC.DLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn
to %ProgramFiles%\Microsoft Visual Studio 9.0\Common7\IDE
Copy the files SEMSFC.RLL, SQLGUI.RLL, and SQLSVC.RLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn\Resources\1033
to %ProgramFiles%\Microsoft Visual Studio 9.0\Common7\IDE\Resources\1033
T

Unable to install Forfront TMG 2010 on Server 2008 R2 with Service Pack1

Hi I am Installing TMG 2010 on Server 2008R2 with service pack 1 ... then I am getting the error as below snapshot...kindly help me out
and I 've check event log then please find below snapshot :

Hi,
It seems that you have created an similar thread below:
Unable to install Forfront TMG 2010 on Server 2008 R2 with SP1
Since you have installed Service Pack 1 for Windows Server 2008 R2, please refer to the KB below:
Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2
If the solutions in the thread above are not helpful, please feel free to contact us.
Best regards,
Susie

Crystal Report Server 2008 integration with java application

Hi All,
Any of you having complete document about Crystal Report Server 2008 integration with java application....like source code and what are all the jar files needed? Or tell me that the implementation is same as Crystal Report Server XI R2?
Thanks

Have you looked at the BusinessObjects Enterprise XI 3.x Java Developer Guide?
[http://www.sdn.sap.com/irj/boc/sdklibrary]
Sincerely,
Ted Ueda

Cannot install VS 2012 SDK on server 2008 R2 with VS 2013 installed

I have a need for the 2012 SDK. Running VS 2013 on Server 2008R2 645
When I try to install, I get the following:
Microsoft Visual Studio is required, but it is not installed on this computer. Please install it and retry.
Log shown:
[1244:0D28][2015-04-23T11:24:41]: Burn v3.6.3014.0, Windows v6.1 (Build 7601: Service Pack 1), path: C:\Users\scott\Downloads\vssdk_full.exe, cmdline: ''
[1244:0D28][2015-04-23T11:24:41]: Initializing string variable 'EditionDisplayName' to value '2012 SDK'
[1244:0D28][2015-04-23T11:24:41]: Initializing numeric variable 'MoreLanguageFwlinkId' to value '0'
[1244:0D28][2015-04-23T11:24:41]: Initializing numeric variable 'PrivacyAgreementFwlinkId' to value '123857'
[1244:0D28][2015-04-23T11:24:41]: Initializing numeric variable 'VSUpdateFwlinkId' to value '248251'
[1244:0D28][2015-04-23T11:24:41]: Initializing numeric variable 'SolutionFwlinkId' to value '242624'
[1244:0D28][2015-04-23T11:24:41]: Initializing numeric variable 'HelpFwlinkId' to value '235127'
[1244:0D28][2015-04-23T11:24:41]: Initializing string variable 'NetfxProductVersion' to value '4.5.50709'
[1244:0D28][2015-04-23T11:24:41]: Initializing string variable 'ProductKey' to value 'YQ7PRQTHDMHCBCV9GKGGTB2TM'
[1244:0D28][2015-04-23T11:24:41]: Setting string variable 'WixBundleLog' to value 'C:\Users\scott\AppData\Local\Temp\dd_vssdk_full_20150423112441.log'
[1244:0D28][2015-04-23T11:24:41]: Setting string variable 'WixBundleOriginalSource' to value 'C:\Users\scott\Downloads\vssdk_full.exe'
[1244:0D28][2015-04-23T11:24:41]: Condition '(VersionNT >= v6.1)' evaluates to true.
[1244:0D28][2015-04-23T11:24:41]: Setting string variable 'WixBundleName' to value 'Microsoft Visual Studio 2012 SDK - ENU'
[1244:0D28][2015-04-23T11:24:42]: Loading managed bootstrapper application.
[1244:0D28][2015-04-23T11:24:42]: Creating BA thread to run asynchronously.
[1244:1250][2015-04-23T11:24:42]: Ux Started
[1244:1250][2015-04-23T11:24:42]: MUX: Loading LocalizableStrings.xml string from LocalizableStrings.xml
[1244:1250][2015-04-23T11:24:42]: MUX: Reset Result
[1244:1250][2015-04-23T11:24:42]: MUX: Current action: Install
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'CurrentOperation' to value 'Install'
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'IsLanguagePack' to value ''
[1244:1250][2015-04-23T11:24:42]: MUX: Current action: Install
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'CurrentOperation' to value 'Install'
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'CurrentRepairPackage' to value ''
[1244:1250][2015-04-23T11:24:42]: MUX: Resume = None
[1244:1250][2015-04-23T11:24:42]: MUX: Restart = Prompt
[1244:1250][2015-04-23T11:24:42]: MUX: Relation = None
[1244:1250][2015-04-23T11:24:42]: MUX: Action = Install
[1244:1250][2015-04-23T11:24:42]: MUX: Display = Full
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'CustomInstallPath' to value 'C:\Program Files (x86)'
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'CustomInstallPath' to value 'C:\Program Files (x86)\Microsoft Visual Studio 11.0'
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'RelationType' to value 'None'
[1244:1250][2015-04-23T11:24:42]: Setting string variable 'DisplayMode' to value 'Full'
[1244:1250][2015-04-23T11:24:42]: MUX: SetupAction: Install
[1244:1250][2015-04-23T11:24:42]: MUX: ProductVersion: 11.0.50727.01
[1244:1250][2015-04-23T11:24:42]: MUX: ProductLanguage: 1033
[1244:1250][2015-04-23T11:24:42]: MUX: Branch: RTMRel
[1244:1250][2015-04-23T11:24:42]: MUX: OS: Windows Server 2008 R2 Standard
[1244:1250][2015-04-23T11:24:42]: MUX: OSVersion: 6.1.7601.65536
[1244:1250][2015-04-23T11:24:42]: MUX: OSLanguage: 1033
[1244:1250][2015-04-23T11:24:42]: MUX: OSArchitecture: AMD64
[1244:1250][2015-04-23T11:24:44]: MUX: Ux Initialized
[1244:0D28][2015-04-23T11:24:44]: Detect 3 packages
[1244:1250][2015-04-23T11:24:44]: MUX: Wait for Detect to complete
[1244:0D28][2015-04-23T11:24:44]: MUX: Detection Phase
[1244:0D28][2015-04-23T11:24:44]: MUX: ---------------
[1244:0D28][2015-04-23T11:24:44]: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\11.0\professional'
[1244:0D28][2015-04-23T11:24:44]: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vs\Servicing\11.0\vscore'
[1244:0D28][2015-04-23T11:24:44]: Setting string variable 'VSComponentPathVariable' to value 'C:\Program Files (x86)\Microsoft Visual Studio 11.0\'
[1244:0D28][2015-04-23T11:24:44]: Registry key not found. Key = 'SOFTWARE\Microsoft\DevDiv\vssdk\Servicing\11.0\core'
[1244:0D28][2015-04-23T11:24:44]: Setting numeric variable 'vssdk_DetectKeyExists' to value 0
[1244:0D28][2015-04-23T11:24:44]: MUX: Adding package: vssdk_core to package detect list
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: MUX: Adding package: vssdk_coreres to package detect list
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: MUX: Adding package: vssdk_finalizer to package detect list
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: MUX: Reset Result
[1244:0D28][2015-04-23T11:24:44]: Detected package: vssdk_core, state: Absent, cached: None
[1244:0D28][2015-04-23T11:24:44]: Detected package: vssdk_coreres, state: Absent, cached: None
[1244:0D28][2015-04-23T11:24:44]: Detected package: vssdk_finalizer, state: Absent, cached: None
[1244:0D28][2015-04-23T11:24:44]: Condition 'CompatibilityMode = 0' evaluates to false.
[1244:0D28][2015-04-23T11:24:44]: Condition '(VersionNT < v6.1)' evaluates to false.
[1244:0D28][2015-04-23T11:24:44]: Condition '( NOT (ProCheck_ProfessionalCore_DetectKey = 1 OR ProCheck_VSCore_DetectKey = 1) ) AND (CurrentOperation = "Install") ' evaluates to true.
[1244:0D28][2015-04-23T11:24:44]: MUX: Stop Block: ProfressionalBlock : Microsoft Visual Studio is required, but it is not installed on this computer. Please install it and retry.
[1244:0D28][2015-04-23T11:24:44]: MUX: Detect Completed
[1244:0D28][2015-04-23T11:24:44]: MUX: Wait for View to be loaded
[1244:1250][2015-04-23T11:24:44]: MUX: Detect Completed, now create view
[1244:1250][2015-04-23T11:24:44]: MUX: Default Selectable Items state:
[1244:1250][2015-04-23T11:24:44]: MUX: Initial Selectable Items state:
[1244:1250][2015-04-23T11:24:44]: MUX: Non-applicable packages grouped by Selectable Items:
[1244:1250][2015-04-23T11:24:44]: MUX: User feedback control is Enable because opt-in value is NotDefined
[1244:0D28][2015-04-23T11:24:44]: MUX: View loaded
[1244:0D28][2015-04-23T11:24:44]: MUX: Go to Blocker page.
[1244:0D28][2015-04-23T11:24:44]: Detect complete, result: 0x0

Hello Scott,
The Visual Studio 2012 SDK need Visual Studio 2012 but not Visual Studio 2013. Please make sure you will use Visual Studio 2012 on your OS.
Here are the system requirement of that:
Supported Operating System
Windows 7 Service Pack 1; Windows 8; Windows Server 2008 R2 SP1; Windows Server 2012
Windows 7 SP1 (x86 and x64)
Windows 8 (x86 and x64)
Windows Server 2008 R2 SP1 (x64)
Windows Server 2012 (x64)
Hardware Requirements:
1.6 GHz or faster processor
1 GB of RAM (1.5 GB if running on a virtual machine)
300 MB of available hard disk space
5400 RPM hard drive
DirectX 9-capable video card running at 1024 x 768 or higher display resolution
Prerequisites:
Visual Studio Professional 2012 or higher
Here higher means Visual Studio 2012 higher version, for example, Visual Studio 2012 Ultimate.
If you want Visual Studio 2013 to work, I think you need to install the Visual Studio 2013 SDK.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server 2008 R2 with Tools Evaluation Copy

Hello,
Is the SQL Server 2008 R2 software (SSMS, BIDS) still available for evaluation download? I was only able to find the Express edition, but I cannot open my solutions using Express. I tried to upgrade Express to Evaluation, but I get the below
error.
Rule Check Result
Rule "SQL Server 2008 R2 edition upgrade" failed.
The selected SQL Server instance does not meet upgrade matrix requirements.
OK
Thank you - Brett

Hello,
SQL Server 2008 R2 Evaluation Edition seems no longer available on Microsoft Download as you can see on the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=8158
However, if you are a MSDN subscriber you can download the full media of any paid edition of SQL Server 2008 R2, run SQL Server setup and choose Evaluation Edition
on the “Product Key” page of SQL Server setup.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to upgrade SQL Server 2008 R2 to SQL Server 2012 SP1

I'm encountering error after error, after successfully installing the upgrade advisor (which took some doing) and running it with essentially no warnings/errors (the one warning was on the connection strings, as I recall -- and all of the warnings had a
"fix after" status.
First failure involved SSRS and the inability to create the "managed account". Backed out the upgrade using http://sqldbanotes.blogspot.com/2013/10/how-to-fix-failed-in-place.html
Now the failure involves SSAS and unable to connect to analysis services with name MSSQLServerOLAPService. That is the logical name for the service, although it shows up as just MSSQLServer when looking at it in the services list. I tried
setting the service account to a local account as well as to Local System -- did not make a difference, the upgrade couldn't apparently find it regardless.
Has anybody successfully done an in place upgrade from SQL Server 2008 R2 to SQL Server 2012?

Hi Bob，
Thanks for your post and I am glad to hear that the issue is resolved. Thanks for you posting a reply to share your solution and I had marked it as answer. That way, other community members could benefit from your sharing.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?

According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]

How to restore SQL Server 2008 database to SQL Server Express 2012

How to restore SQL Server 2008 database to SQL Server Express 2012.
I BACKED UP a SQL Server 2008 database from work, which runs the enterprise version of 2008, and I tried to RESTORE it to my new 64-Bit home PC which is running the new SQL Server Express 2012 64-Bit (Advanced Edition).
But if fails. I get the following message text.
Can anyone help me please. I thought restoring a 2008 database to the later version 2012 would be possible.
Here is the error message. Thanks.
TITLE: Microsoft SQL Server Management Studio
Restore of database failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the backup, or use a
backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)

ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the
backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)
Are you sure your database is SQL server 2008 from error message it seems your SQL server version is 2000.I guess you have multiple versions of SQL server.
AFAIK you cannot restore backup of SQL server 2000 to 2012 directly .Restore it first to SQL 2008/2008R2 or 2005 then take backup again of new database created and then you would be able to restore it on 2012.Its kind of intermediate way
Also make sure your DB size is less than 10 G as max DB size supported by Express edition is 10 G and if your DB size is more than 10 G restore will fail.
You are also trying to restore enterprise DB backup on express edition so you will loose enterprise features on express edition
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to change backend databases sql server 2008 R2 to Sql server 2012 datacenter

Hi
i have current sharepoint 2010 form has backend database is sql server 2008 R2 on windows server 2008 R2 Enterprise
and this form has
1 application server
1 Search server (index server)
1 wfe server ( all web applications are running)
1 databse server
here how i change this form back end to new windows server 2012 and sql server 2012 datacenter
adil

Information on SQL Aliases (using cliconfg.exe):
http://sqlandme.com/2011/05/05/create-sql-server-alias-cliconfg-exe/
You need to migrate content back into the database prior to migration:
http://technet.microsoft.com/en-us/library/ff628255(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff628257(v=office.14).aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Proxy Server 3.6 with Identity Server 5.1!

Hi All,
I'm doing a Proof of Concept on integrating Identity Server 5.1 with proxy server 3.6. The proxy server is configured as a reverse proxy for another web server (since the web server is not supported by agent pack).
I've configured the reverse proxy and add the agent to the proxy. However, each time after auth. in the Identity server and return back to the reverse proxy, it'll go to http://rproxy.domain.com/.domain.com not http://rproxy.domain.com.
Moreover, even the user session is invalid, the user can go to the reverse proxy without re-auth even I've disable all the cache in the proxy server.
Is it possible to use reverse proxy with identity server? If yes, how to config?
Thanks
Clive Chan

Hi Clive Chan,
i am also have the same problem, can you tell me which patch have you add to solve the problem?
Thanks a lot!
Angus

Replicate win server 2008 r2 with win server 2012 r2

Similar Messages

Maybe you are looking for