Replicated datasources transportation

i have created TR for all the datasources (3 generic and 1std(3.5)) in ecc DEV.I ahve also created TR for replicated datasources for the above in BWDev.
so, once the ECC DEV to ECCQA moves , DO I NEED TO REPLICATE THE DATA SOURCES AS I HAVE GOT REPLICATED DATAOUSRCES IN BWD ev?
2. what would happen if i manually replicate the datas soruces in BWQA, then transport replicated datasources from BWD evto BWQA
3. if i need not activate manually the datasoruce in ECCQA, then i should wait for the replicated datasources to reach BWQA, and then only transport other request?
4. how to transport ONLY PSA? what are the necessary steps to be taken?

Hello,
There is no harm in replicating the datasource in BI QA box...once you replicate them to get them activated you can send the transport request...
ARE u saying that after manually replicating in BIQA, the replicated datasources request from BIDEV to BIQA would activate the dataosources in BIQA?
Even if you dont replicate and send the replicated request it will do.
What i understand is that i can simply transport the ECC request to ECCQA , then just transport the replicated datasources from BIDEV t BIQA for replicating the datasources and then after this all the other BI requests should be imported?
my concern is that if i manually replicate the datasources in BIQ, then start importing all the BI request and i ahve got first 3 replicated datasources followed by other requests. so ,after the manual activation, once these replicated datasources moves, should i wait for reactivation of all the datasources and only then transport request of the transports?

Similar Messages

BI Content Remote Activation of Datasource - Transports

During the process of installing BI content in the Dev BW Environment, I am promted to login to the source system (CRM DEV in this case) so that the BI content datasources can be activated and replicated remotely. This process works fine.
The question I have is the following.
When I tranpsort all the BW BI content objects from our DEV BW environment to the BW QA environemt, do I still need to collect the activated datasources in the source system (CRM DEV ) and also transport them to CRM QA ?
Or does the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically when i transport the BW BI content objects from DEV BW to BW QA.
Thanks

I don't think, the remote activation and replication of the datasources(in the source system-CRM QA) happen automatically BW QA.
In BI 7.0, the general practice is, first u have transport datasources from ECC Dev to ECC QA...Then replicate these datasources in BI QA.
In most of the cases, these replicated datasources becomes inactive in BI QA.
To over come this, after the replication, u should transport Datasources from BI DEV to QA, so that this DS overwrites replicated (inactive) ones from ECC.
Re: DataSource getting inactive after transport

What will Happen in R3 side while Replicating Datasource

Hi Friends,
what will happen in R3 side and BW side while replicating datasource in BW side
Thanks & Regards,
Gowri

Hi Gowri,
Replication needs to be done only when you change the extract structure which in turn would change your datasource. The simplest way to know when replication needs to be done is each time you save you datasource in R/3. This causes the timestamp of the datasource to be changed and hence the timestamp of the datasource in R/3 and BW are not in sync. Replication would make the timestamp in sync in both R/3 and BW.
Hence you would notice the error "Timestamp error" when you do not replicate the datasource after changing it.
Also check this link:
Re: time stamp
Bye
Dinesh

Question about Datasource (transport / activate)

Let you know this subject is already fixed.. so regard it.
Edited by: Glenn Quinn on Mar 13, 2008 4:14 PM

I made a mistake on my end, and I thought it is fixed but it isn't.
What I am trying to transport Datasource to QA. It did went successfully but somehow it didn't activate on the QA. It is showing modified in QA. I am trying to make it active version. I did tried to replicated but no success on it. Any idea on how to make it work or what step I need to do?
Edited by: Glenn Quinn on Mar 13, 2008 4:38 PM

Question to Datasource transport

I repulicate one datasource from R/3 to Production BI system using 3.5 version. However I used this datasource as 7.0 version, also created transformation based on the datasource in BI development system. Quesiton is if I transport request from BI development to BI production system, does this datasource with 3.5 verison will be changed automatically to 7.0 version? Are there any risk on it. Thanks!

Once u migrated Datasource to 7.0 in Dev, after transport it will appear as 7.0 datasource.. No need to migrate there in Production...
in prod system, after replication datasource will have the inactive status..
Now U have to transport same datasource from BI DEV to BI PRD... And this will overwrite the replicated inactive datasource

Replicating DataSource in BW

I have check that the data source's (2LIS_08TRFKP, 2LIS_08TRFKZ, 2LIS_08TRTK, 2LIS_08TRTS, 2LIS_08TRTLP) are in RSA6 and active in the LBWE. When going to RSA1 to replicate the metadata the only datasource that I can see after searching is 2LIS_08TRFKP. Any suggestions/help would be much appreciated.

are you able to do Test Extraction @ RSA3 for the DS which were not replicated to BI ?
Normally when you do replicate you should get all the DS which are activated @source system .. RSA6 - select DS - click on Transport icon and replicate in BI again
What is the Version of R/3 ?

BW DataSource Transport

Hi Gurus,
We are in the process of transport of BW objects from Dev box to QA. We started with R/3 datasources and got that replicated in QA BW system. Now the next thing in the line is the transport of BW DataSources (not available in R/3 box) like 0REGION_TEXT or 0COUNTRY_TEXT that needs to be made available in QA before we transport requests for InfoObjects, InfoArea, etc. We have created a single transportable package ZNEW for all the BW objects. However, these DataSources have the package BUPA_EXT (not $TMP or not Blank) assigned to it. I am not sure, if BUPA_EXT is a standard package.
We also have assigned few of these BW datasources to ZNEW.
On transporting these to QA (and of course, importing it later), we dont see those in QA except is RSA5. I checked in the QA. This is not even available under the DataSource tree for the BW logical source system. How do we have them activated or transported in QA?
Just to add to the above, the Data files and co files were not created in the OS level during transport.

Hi,
One other thing you can try to do, is to goto your infosources, and try to assign a DS to that. See if you get the value of the DS you are looking for, for the respective info source.
Also, check the transport request itself, if it was successful or whether it failed with some error or had any warnings as well.
Cheers,
Kedar

Error while Replicating Datasource from R/3

In R/3 extraction, after activating the datasource in R/3 and replicating the datasource in BI, I received an error saying that 'SQL error occured when accessing a table' with Message no. RSAR051... Help me in this.

I checked in ST22. But there is no problem in it. Pls give me the solution..

Datasource transport in BI 7.0 in SCM 5.0 fails

System Specification - SCM 5.0 with BI 7.0 SP10.
Is there a way to transport a new datasource created from a planning area from Dev -> QA. Right now I have tried many times to transport datasources and all of them have failed. In the past we had to either open the system or use a User with SAP_ALL and manually activate these datasources and then transport the remaining objects DTP's, TRNFMs etc.
Any other way to activate datasources, other then manual method.
Thanks,

Hi Satish,
You want to transport transformations. This transformation can be between datasrc and the infocube or any such 2 objects.
The target system where you want to transport this should have these 2 objects. They must be active in the target system.
If not then the request which you will transport should also have these 2 activated objects along with the transformation.
hope it helps...

DataSource Transport to another system

HI,
I have transported the DataSource from Development system to Quality system. The datasource is showing under the source system of Development system in Quality system. How can I change this Datasource to source system Quality system.
thanks and regards
Murugesan

HI,
Have you checked the source system assignment and conversion of logical systems names after the transport?
RSA1 --> Menu bar -->Tools -->conversion of logical systems names
Enter the original source system (Dev) and Target source system (QA) save it...
Regards
KP

DataSource-Transport in R/3 does not work

Hello everybody,
we're currently having some trouble with transporting DataSources in the SAP R/3 out of the transactions RSA6 (for standard DataSources) or RSO2 (for generic DataSources).
system environment:
We're using three R/3-Systems (deployment, integration and production) and two BI-Systems (deployment/integration as one and production) with the folowing connections:
BI-production <- R/3-production
BI-deployment/integration <- R/3-integration
nothing <- R/3-deployment
This problem only occurs in the R/3-deployment-system.
problem:
Usually a transport request pops up if you edit a DataSource. In our case nothing happens. We can transport the ExtractStructure without any problems. But the DataSource itself cannot be transportet. So we have to do every single change in the R/3-integration-system again. This is leading to the issue that the two elements of a DataSource (the ExtractStructure and the DS itself) have two different original-systems.
Thanks for your help and kind regards
Sebastian.

Maybe its helpful to say that the key-problem is that the system doesn't create an a-version (object type OSOA) of the DataSource.
If you activate a content-DS in RSA5 you normally add an a-version of the DS to the already existing d-version (object type OSOD) of that DS. And if you create a generic DS you normally also create an a-version of that DS.
In our case that doesn't happen. And that's the reason why we cannot transport the DS.
But - as I sad - this problem only occurs in our development-system.

DataSources transport from development to QA TESTING???

Hi Gurus,
I developed some objects in my D system using a generic extractions. I used 3 DataSources .
Ii transported all my SAP BW object in the testing system. now I need to collect my 3 DataSource in the R/3 development System to the R/3 system. Please can anyone show me the steps. I tried all day but no result. Please help me, I need the steps.
Thank You Gurus.

Hi
You are using Tbales, so collect Table if it is Z/Y table, if it is SAP table then not required.
1.Collect Tables and DataSources in request and transport from D ECC to Q ECC.
2.Replicate DS in Q BW system.
3.Collect InfoObjects and Transport from D BW to Q BW.
4.Collect Cube/DSO and Transport from D BW to Q BW.
5.Collect Multiproviders if you have any and Transport from D BW to Q BW.
6.Collect Transfer/InfoSource and Transport from D BW to Q BW.
7.Collect Update Rules and Transport from D BW to Q BW.
8.Collect Reports and Transport from D BW to Q BW.
Thanks
Reddy

Urgent : CO/PA Datasource Transport from R/3 DEV to R/3 QA

Hello!
I am trying to transport the CO/PA datasources that show up in RSA6 in R/3DEV to R/3 QA. All the transports have been moved. Nothing shows up in RSA6 of QA. I can display the datasource in KEB0 but cannot do the extraction in RSA3, as it gives the error 'It is not defined in the system".
I have already executed the program ZCOPACLT and that is how I can display the datasource in KEB0.
Am I missing something somewhere?
Any suggestions are welcome.
Kind of urgent. Appreciate your time.

Hi Sonal,
1) check in DEV if the extractstructure was generated there.
2) check the object list of the transport to see wether the extractstructure was included.
if the structure was not generated in DEV you might have to recreate the Datasource, unless anybody knows a better way.
if the structure is inactive (e.g because Description is missing) try to activate the structure and recollect the transport.
If the structure is available in Dev and active annd was not in transport you should recollect and retransport.
Sorry, thats all I can think of right now.
Michael

Datasource transport

Hi
I want to include the datasource in the Transport Request.
how do i achieve the same
plz guide
Regards

Goto
SE03 and then Include Objects in a Transport Request , then remove Maximum Number of Hits = 1.000 and give 9999, then give Person Responsible i.e. SAP Id and then execute it will display all Packages, you identify your Object and then select it and click on In request Button, it will ask Package name and Req, so create it.
Thanks
Reddy

DataSource Transport error

Hello Gurus...
We are getting an issue while transporting the Ds's from D to Q system.
error msg is " Object requested is currently Locked by user DDIC"
Could anyone help me to voercome this.
regards,
Ala.

Well do the following:
rather than uncloking the request, unlock the object from all request. For this, go to SE03 again --> give RSDS as type and <datasource name> --> select the check box and execute. This should surely remove your DS object from all request.
Regards
Pankaj

Replicated datasources transportation

Similar Messages

Maybe you are looking for