Replicating Configuration of Service and Content Sections

I have 2 CSS11050 in a Active/Backup scenario useing Redundant-VIP and Virtual Routers. I want to have a script of something replicate the Service and owner section of the config form the ACtive Switch to the backup without effecting the VLAN or int sections. I tried teh Script that come in the OS but it want the redundant protocol loaded.
Anyone have a solution or idea on how to handle this?

I would suggest looking at this link which deals with configuration of redundancy on the CSS as well as the two types of configuration synchronizations (complete and partial) and redundant protocols.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_500/advcfggd/redndncy.htm#xtocid4

Similar Messages

  • Maximum service and content rule count

    Hi,
    I got asked by a customer if there is maximum of services or content rules known for a 11503. I guess this is strongly related to available memory and the sessions per content rule but I'm searching for some figures about this.
    Any input is appreciated.
    Kind Regards,
    Joerg

    What models does this figure of 10,000 apply to? What specifically is creating this limit? What may happen if this limit is exceeded?
    Jason

  • Managed Metadata Service and Content Type Hubs - Service Connection necessary?

    I created a site collection and activated the content type hub feature at the site collection level. We have an existing managed metadata service but I am unable to edit its settings, so I created a new MMS in a new database, however; there is no "service
    connection" row below the MMS row for the new MMS Application, but there is one for the old MMS Application. Will this still work with my content type hub? If not, how can I get the service connection setting/row? I have to do this via PowerShell since
    the menus in the ribbon are not usable due to our JavaScript settings...

    Are you using Custom claim provider??
    If you are then try this:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
    http://www.chapmanconsulting.ca/post/2010/04/23/The-Case-of-the-Failing-SharePoint-2010-FBA-Configuration.aspx
    #RoHsTr

  • Configuring PerformancePoint Service and other BI when you're on an O365 Sharepoint site

    Sharepoint online is great. Easy to use. relatively stable. But I cannot find any protocol, in absence of having access to Central Administration (how I wish I did), to configure PPS and other elements I need to begin leveraging reporting and dashboards.
    Does anyone know how I do this? Do I have to hand feed the steps to some CIM Sharepoint Tier engineer to execute for me? Or is there another way.

    O365 does not support the traditional BI features (PerformancePoint, Excel Services with connected data sources, PowerPivot to external data sources, etc). The reasons for this are numerous (no connections back to data centers, use of claim tokens, use of
    shared webapps and therefore shared app pool accounts, etc).
    For several reasons, this is why MS is pushing "PowerBI", which is a separate half-answer to the whole hosted BI issue. But this is NOT the same as PPS/etc.
    If you want BI, you need on-prem (or hybrid, where the BI components are on-prem).
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Shared Services database content not found in the specified database."

    Trying to configure Version 11 and get the error: "Shared Services database content not found in the specified database". Relevant details on my issue as below:
    - I'm running Windows 7 and SQL Server 2008 on my local machine.
    - I did have a previous installation of Hyperion 9 on my machine which I uninstalled before installing 11. However, after uninstalling, I could still see the Hyperion EPM (empty folders) in my "All Programs", which I manually deleted.
    - Now I've installed Essbase 11, and for now am trying to configure Hyperion Foundation only (Common Settings and Configure Database is greyed out, I checked deploy to applicaiton server. I left the calculation manager and workspace blank).
    - The next window is the "Configure Shared Services and Database Registry" option. I chose "Perform 1st time Configuration of Shared Services Database". When I enter the relevant details, I got the error mentioned above. My error log file entries are as below:
    (Jul 14, 2010, 02:10:50 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
         at java.util.ArrayList.RangeCheck(ArrayList.java:546)
         at java.util.ArrayList.get(ArrayList.java:321)
         at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
         at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
         at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
         at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
         at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
         at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
         at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
         at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
    (Jul 14, 2010, 02:11:08 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
    (Jul 14, 2010, 02:11:58 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
    I believe version 11 supports Windows 7, but correct me if I'm wrong. What's going on here? Any suggestions on what I should try ?

    Actually when I installed version 9, I never got around to configuring shared services and so never had a shared services database in SQL Server to begin with.
    One question about the registry entry you told me to delete: The (HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions) which currently exists would be the entry for version 11 which I have installed right? It's the only entry for Hyperion Solutions in the registry.
    After uninstalling versino 9, C:/hyperion still existed on my machine (though it didnt have all the subfolders which it did prior to uninstalling), so I manually deleted it before installing verison 11.
    I wouldn't mind installing it on a compatible version of windows, but the thing is that at this point this is all that is available to me.
    and I don't have any other oracle products.
    thanks....

  • How to configure Web service using transaction SOAMANAGER?

    Hi SDN,
    I have followed this article to configure using transation SOAMANAGER.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20b723f8-a422-2c10-aca5-fe64eeda1ff2&overridelayout=true
    but I have some issues about looking for ECC_PURCHASEORDER003QR in default_host/sap/bc/srt/xip/sap of above article.
    I can not configure Web service and go to steps further.
    The system is ECC 6.0 release 7.
    How can be done?
    Thanks,
    Luu,

    Hi,
    > but I have some issues about looking for ECC_PURCHASEORDER003QR
    You mean you can't see this service in sicf or you have trouble locating this service in SICF. Can you specify what exactly your problem is?
    Please check if you are on correct Ehp (Enhancement pack) required for this service. This service available with Ehp4.
    To check enhancement pack goto System->status and check component information i.e. SAP_APPL release is 603 in my system which means I am on Ehp3.
    Regards,
    Gourav

  • GPO Security Zones and Content Ratings "Modify Settings" buttons are disabled

    Task: Trying to modify a GPO so that specific users who logon to Remote Desktop Servers will have a lower Internet security level for Internet Explorer.
    We have two Windows Server 2008 Domain Controllers, when I access the GPO using the Group Policy Management Console and Editor on either of the two Domain Controllers, then navigate to User Configuration > Policies > Windows Settings > Internet Explorer
    Maintenance > Security > Security Zones and Content Ratings, the available "Modify Settings" buttons are both disabled.
    I've read through several forum posts relating to this and the closest solution mentioned was to turn off IE ESC for Administrators on both Domain Controllers. I've done this and it nothing has changed as a result. Is there a way enable the "Modify Settings"
    buttons, or is there another way to achieve the task mentioned at the top of this post?

    Hi,
    We need to import these settings before we modify them.
    To import security zones and privacy settings from our computer using IEM:
    Click
    Import the current security zones and privacy settings 
    To import content ratings from our computer:
    Click
    Import the current Content Ratings settings
    Regarding how to configure Security Zones and Content Ratings, the following article can be referred to for more information.
    Configure Security Zones and Content Ratings
    http://technet.microsoft.com/en-us/library/cc772410.aspx
    Best regards,
    Frank Shen

  • Populating configuration items: Computers, Services and People under Related Items tab in Computer CI form

    Hi,
    We have integrated SCCM and SCOM with SCSM to import the CI information in CMDB.
    We are able to import few CI information from SCCM regarding softwares, OS, etc and from SCOM regarding hardware and discovered objects.
    When we open the Computer CI in SCSM, we are able to relate almost all the fields from SCCM and SCOM expect Related items tab.
    The Configuration Items: Computers, Services and People are empty under related items tab on Computer CI form.
    Kindly please help me to understand regarding this related items tab.
    Any help will be very much appreciated.
    Thanks
    Kumaresan Lakshmanan

    Hi,
    The Related Items is not automatically populated by any out-of-box connector. You can manually add related configuration items there. What were you expecting to show up under this section?
    Regards,
    Dieter

  • HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

    In my Airport Utility a read the following message:
    This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

    I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
    Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
    If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
    Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
    Run Pacifist.
    Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
    The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
    Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
    You can now run the AirPort Utility from the Utilities folder.

  • Mail Service and one Opendirectory Master and two failed Replicas

    Hi.
    I'm experiencing a problem with the email service.
    I have one OD master and 4 replicas connected via VPN Cisco Pix, everything was working fine until we receive the "new" G5 server to change the old g4 server.
    My old G4 was the OD master and I was planning to change the G4 server to the G5 to be the new OD master, for that I follow some instructions in the forum and I connect the G5 as a replica of the G4 and after that I shutdown the G4 and I change the G5 to master ( I change the name and Ip address to ) and I rebuild all the replicas to the G5 and magically everything woks perfect after.
    After two weeks we was having internet link problems with two of the replicas installed in other countries because of that the replicas was down for about two weeks.
    After the reestablish of the internet links all the user with HOME DIRECTORIES in the replicas BUT with email in the OD master was not receiving any email, but in the email client they was not receiving any error, I check the postfix queue and I realize that all the emails was in the queue waiting for delivery and with error messages like "ltmp connection error" ( something like that ) and so on.
    Checking the documentation from apple and forums and so on, I realize that the problem was the replicas , the log message in the Password Replica Service log was " Password Service Not Found" and I rebuild again this two replicas but the problem was there again.
    Today I made a test with one account and I point the home directory to the OD master and ALL the email where send to the mailbox right away.
    When I sow this I starting checking with the inspector in WGM to try to find a variable or any option to disable this problem and I realize that in the Config-passwordservice and in the replica list there is the old ip of the G5 before coming to be the master and another replica that doesn't exist.
    My questions are :
    1.- How can I clean this XML file to fix this ?
    2.- Why the email service stop working even that the email service is in another server ( not the replica) ?
    3.- There is a way to disable or change any option in any XML or Ldap file for this sync issue ?
    4.- How can I redo the OD Master without lose the user/password list to have a clean XML configuration file ?( or the correct way to do this kind of changes )
    Thanks a lot.

    Very good I was trying to find some kind of info thanks.
    Checking my file in the OD master I realize that not look the same, please take a look.
    Check the Bold comments
    <?xml-version="1.0"-encoding="UTF-8"?>
    <!DOCTYPE-plist-PUBLIC-"-//Apple-Computer//DTD-PLIST-1.0//EN"-"http://www.apple. com/DTDs/PropertyList-1.0.dtd">
    <plist-version="1.0">
    <dict>
    --------<key>DecommissionedReplicas</key>
    ----------------<array>
    ----------------_*<string>Replica2</string> This list don't mach with the replicas*_
    ----------------<string>Replica3</string>
    ----------------<string>Replica4</string>
    ----------------<string>Replica6</string>
    --------</array>
    --------<key>ID</key>
    --------<string>A20EA3E0AB31C9E61FD65069E21E55A0</string>
    --------<key>Parent</key>
    --------<dict>
    ----------------<key>EntryModDate</key>
    ----------------<date>2007-09-18T04:41:37Z</date>
    ----------------<key>IDRangeBegin</key>
    ----------------<string>0x00000000000000000000000000002491</string>
    ----------------<key>IDRangeEnd</key>
    ----------------<string>0x00000000000000000000000000002685</string>
    ----------------<key>IP</key>
    ----------------<array>
    ------------------------_*<string>172.16.10.7</string> this is the old ip addres before to be the OD master*_
    ------------------------<string>172.16.10.5</string>
    ----------------</array>
    ----------------<key>LastSyncDate</key>
    ----------------<date>2007-09-20T17:25:22Z</date>
    ----------------<key>ReplicaPolicy</key>
    ----------------<string>SyncDefault</string>
    --------</dict>
    --------<key>Replicas</key>
    --------<array>
    ----------------<dict>
    ------------------------<key>EntryModDate</key>
    ------------------------<date>2007-09-18T04:43:53Z</date>
    ------------------------<key>IDRangeBegin</key>
    ------------------------<string>0x00000000000000000000000000000209</string>
    ------------------------<key>IDRangeEnd</key>
    ------------------------<string>0x000000000000000000000000000003fd</string>
    ------------------------<key>IP</key>
    ------------------------<string>172.xx.12.5</string>
    ------------------------<key>LastSyncDate</key>
    ------------------------<date>2007-09-20T15:31:17Z</date>
    ------------------------<key>LastSyncFailedAttempt</key>
    ------------------------<date>2007-09-18T04:43:40Z</date>
    ------------------------<key>ReplicaName</key>
    ------------------------<string>Replica1</string>
    ------------------------<key>ReplicaPolicy</key>
    ------------------------<string>SyncDefault</string>
    ------------------------<key>ReplicaStatus</key>
    ------------------------<string>NotFound</string>
    ------------------------<key>SASLRealm</key>
    ------------------------<string>localhost</string>
    ------------------------<key>SyncInterval</key>
    ------------------------<integer>300</integer>
    ----------------</dict>
    ----------------<dict>
    ------------------------<key>EntryModDate</key>
    ------------------------<date>2007-09-20T15:31:32Z</date>
    ------------------------<key>IDRangeBegin</key>
    ------------------------<string>0x00000000000000000000000000001861</string>
    ------------------------<key>IDRangeEnd</key>
    ------------------------<string>0x00000000000000000000000000001a55</string>
    ------------------------<key>IP</key>
    ------------------------_*<string>172.xx.10.169</string> This not exist long time ago*_
    ------------------------<key>LastSyncFailedAttempt</key>
    ------------------------<date>2007-09-20T15:31:17Z</date>
    ------------------------<key>ReplicaName</key>
    ------------------------<string>Replica5</string>
    ------------------------<key>ReplicaPolicy</key>
    ------------------------<string>SyncDefault</string>
    ------------------------<key>ReplicaStatus</key>
    ------------------------<string>NotFound</string>
    ------------------------<key>SASLRealm</key>
    ------------------------<string>chile.dilbrands.com</string>
    ------------------------<key>SyncInterval</key>
    ------------------------<integer>86400</integer>
    ----------------</dict>
    ----------------<dict>
    ------------------------<key>EntryModDate</key>
    ------------------------<date>2007-09-20T05:00:55Z</date>
    ------------------------<key>IDRangeBegin</key>
    ------------------------<string>0x00000000000000000000000000002289</string>
    ------------------------<key>IDRangeEnd</key>
    ------------------------<string>0x0000000000000000000000000000247d</string>
    ------------------------<key>IP</key>
    ------------------------<string>172.xx.13.5</string>
    ------------------------<key>LastSyncDate</key>
    ------------------------<date>2007-09-20T15:31:17Z</date>
    ------------------------<key>LastSyncFailedAttempt</key>
    ------------------------<date>2007-09-20T05:00:45Z</date>
    ------------------------<key>ReplicaName</key>
    ------------------------<string>Replica7</string>
    ------------------------<key>ReplicaPolicy</key>
    ------------------------<string>SyncDefault</string>
    ------------------------<key>ReplicaStatus</key>
    ------------------------<string>NotFound</string>
    ------------------------<key>SASLRealm</key>
    ------------------------<string>localhost</string>
    ------------------------<key>SyncInterval</key>
    ------------------------<integer>300</integer>
    ----------------</dict>
    ----------------<dict>
    ------------------------<key>EntryModDate</key>
    ------------------------<date>2007-09-18T01:33:32Z</date>
    ------------------------<key>IDRangeBegin</key>
    ------------------------<string>0x00000000000000000000000000002699</string>
    ------------------------<key>IDRangeEnd</key>
    ------------------------<string>0x0000000000000000000000000000288d</string>
    ------------------------<key>IP</key>
    ------------------------<string>172.xx.10.6</string>
    ------------------------<key>LastSyncDate</key>
    ------------------------<date>2007-09-20T17:25:22Z</date>
    ------------------------<key>ReplicaName</key>
    ------------------------<string>Replica8</string>
    ------------------------<key>ReplicaPolicy</key>
    ------------------------<string>SyncOnSchedule</string>
    ------------------------<key>SASLRealm</key>
    ------------------------<string>localhost</string>
    ------------------------<key>SyncInterval</key>
    ------------------------<integer>7200</integer>
    ----------------</dict>
    ----------------<dict>
    ------------------------<key>EntryModDate</key>
    ------------------------<date>2007-09-20T15:31:49Z</date>
    ------------------------<key>IDRangeBegin</key>
    ------------------------<string>0x000000000000000000000000000028a1</string>
    ------------------------<key>IDRangeEnd</key>
    ------------------------<string>0x00000000000000000000000000002a95</string>
    ------------------------<key>IP</key>
    ------------------------_*<string>172.xx.11.101</string> this allways fail but network and dns work perfect.*_
    ------------------------<key>LastSyncFailedAttempt</key>
    ------------------------<date>2007-09-20T15:31:17Z</date>
    ------------------------<key>ReplicaName</key>
    ------------------------<string>Replica9</string>
    ------------------------<key>ReplicaStatus</key>
    ------------------------<string>NotFound</string>
    ------------------------<key>SASLRealm</key>
    ------------------------<string>localhost</string>
    ------------------------<key>SyncInterval</key>
    ------------------------<integer>300</integer>
    ----------------</dict>
    --------</array>
    --------<key>Status</key>
    --------<string>AllowReplication</string>
    </dict>
    </plist>
    Thanks again.

  • After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

    I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
    (and I get no errors), something is not working.
    If I try to go to the website that it creates in IIS
    http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
    Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
    Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

    I experienced the same two issues mentioned in this thread today.
    Regarding  the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
    All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
    done, the workflow host site was brows-able.
    The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
    Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
    If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
    Ramona Maxwell MCPD
    SharePoint 2010, MCITP
    SQL Server 2008

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Unable to configure Reporting Services 2012 after using 'netsh http delete urlacl' command and .EXE file also.

    One of my servers quit responding during some troubleshooting of another issue and when I try
    to reconfigure it I am receiving Results as follows:
    Reserving url http://+:80
    The URL has already been reserved.
    It appears to me that there is something with the Virtual Directory that is not allowing me to use it or
    overwrite it.  If I change the name or the port the new configuration works fine, however this is part of a scale-out test environment and I need to keep the virutal directory names the same.
    I have uninstalled and reinstalled SSRS in an attempt to resolve, but that did nothing to this issue.
    I have used 'netsh http delete  urlacl' command and deleted saved urls also but still am facing issue.
    How can I manually list, delete, or edit  Virtual Directories in SSRS 2012? 

    Hi Syed,
    Based on my research, the issue can be caused by the default values for Report Server Web Service and Report Manager has already been reserved. In order to trouble shoot this issue, please refer to the following steps:
    To check this issue, we can run the following command in the command windows:
    netsh http show urlacl | find "Report"
    It should returns the reserved URL as below:
    Reserved URL            :
    http://+:80/ReportServer/
    User:
    Reserved URL            :
    http://+:80/Reports/
    User:
    Then we can delete the reserved URLs with the command below and recreate them to fix this issue:
    netsh http delete urlacl http://+:80/ReportServer/
    netsh http delete urlacl http://+:80/Reports/
    Reference:
    http://fix.lazyjeff.com/2011/12/sql-server-2008-r2-report-server-web.html
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Configure the ADMIN and CLUSTER service connections to be SSL

    Can you configure the ADMIN and CLUSTER service connections to be SSL
    rather than tcp?
    I was wondering about the present or future ability to secure other
    connection services with SSL. Can you now or are there future plans
    to configure the ADMIN and CLUSTER service connections to be SSL
    rather than tcp? I suppose I should add the PORTMAPPER to that list.
    My primary interest is for an SSLCLUSTER service in the case where
    two brokers are connected over a non-trusted network. It may
    not be too difficult to secure all the services the same way, but
    perhaps that is on the TODO list.
    A related question is if there are plans to add SSL with client
    authentication as a stronger authentication mechanism than 'simple'
    username and password. I believe you could get the username from
    the client certificate's DN and continue to use the same LDAP user
    repository for access control. I think this is similar to the way
    that BEA's Weblogic server does it.
    Finally should it be possible to deploy the HTTP tunnel servlet to
    a webserver (such as iPlanet Web Server) configured to do SSL with
    client authentication as a work-around to get stronger authentication
    with the current release of the product? Or am I perhaps missing some
    obvious and important detail? :) I guess I would like to know it's been
    done already or is at least possible before I try and do it myself.

    3 scenarios involving SSL are:
    1: JMS client <------- SSL -------> iMQ broker
    2: iMQ admin <------- SSL -------> iMQ broker
    3: iMQ broker <------- SSL -------> iMQ broker (i.e clusters)
    (1) is currently supported in iMQ 2.0
    (2) and (3) is not supported in iMQ 2.0. No concrete plans yet to support
    it in the near future but we'll definitely consider doing it if we
    hear a lot of demand for it.
    ]A related question is if there are plans to add SSL with client
    ]authentication as a stronger authentication mechanism than 'simple'
    ]username and password. I believe you could get the username from
    ]the client certificate's DN and continue to use the same LDAP user
    ]repository for access control. I think this is similar to the way
    ]that BEA's Weblogic server does it.
    This is on our todo list, but due to other more pressing issues we
    have not been able to address it. We will continue to keep it
    on our potential list of new features.
    Sorry if I sound pretty wishy-washy in my responses above, but the fact
    is that the things you mentioned above had to take a backseat
    to other more critical features. That and the usual time/resource
    constraints caused them not to be implemented.
    ]Finally should it be possible to deploy the HTTP tunnel servlet to
    ]a webserver (such as iPlanet Web Server) configured to do SSL with
    ]client authentication as a work-around to get stronger authentication
    ]with the current release of the product? Or am I perhaps missing some
    ]obvious and important detail? :) I guess I would like to know it's been
    ]done already or is at least possible before I try and do it myself.
    Yes, this should be possible (although I don't believe we've tried it here).
    The client authentication here is really only between the JMS client and the
    web server (not between the tunnel servlet and the iMQ broker) and should
    be similar in setup to any other java application talking to iPlanet Web
    Server.

  • DMS and Content Server configuration

    After installing the Content Server and creating a Content Repository, I have to make that documents be stored in that contet repository. Please, help me with this becasue it is not clear for me how to solve it.
    Thanks!
    Patricia

    Hello Everybody,
    my team and me need your help.
    We have the same problem...
    - Installed Content server on Win 2003 server
    - Using SAP ECC 5.0 and trying to create and configure content repository via 'OAC0'
    - This is initially our test environment so here we are not using any certificates
    When we try to connect the Content Server from ECC 5.0, an error popup appeared : HTTP error 401 "Error in configSet".
    Is somebody has  an idea ?
    Latheef (or someone else), could you please forward me the Configuration document on SAP Content server ?
    My mail is :  <email address deleted by moderator>
    Thanks in advance & Regards,
    Christophe

Maybe you are looking for