Replicating contact persons

Hi gurus,
I have trouble replicating the contact persons. The content of the document (B09: CRM Replication) is very poor at this point (Replicating contact persons).
Does anyone could explain the steps?
Thank's

Dear Folks,
We have implemented Accounts & Contact Management (BP) in our CRM System. Here the Issue is the Business User Can able to create an Account Successfully but when he is trying to create Relationship - "Has Contact Person" the following error has got occured -
500 SAP Internal Server Error
Error msg - Inconsistancy between Dictionary Types COMT_BSP_BP_TEL_T AND BAPIADTEL (Type of Termination: RABAX_STATE)
Could you pls help me out and How can i proceed to scan the issue?
Srujan

Similar Messages

  • Contact person creation in SUS-SRM

    Hello experts,
    We are using SRM 5.0 (EBP and SUS).
    At the moment we are using the Supplier Self Registration functionality, but would like to know if it's possible for the company to control the contact persons (users) creation, instead of the vendor to create them for themselves.
    If so, how would this scenario work exactly?
    Regards,
    Gilberto Gallardo

    There is possibility of replicating --> contact persons from SRM to SUS.
    you have to use the transaction --->
    BBP_SP_COMP_INI in SRM (EBP).
    Please try to replicate the contact person ---> to SUS --> and see wether the same contact person can be used to login to SUS.
    i have not tried this --> so not sure wether the user can login to SUS.
    as far as i know , it is not possible for the purchasing company to create and control users on SUS.
    this is because , supplier user needs to be connected to the supplier company -->
    Edited by: khan voyalpad usman on Feb 7, 2008 12:45 AM

  • Contact Person Replication Problem - Updating could not be completed

    Dear Experts,
    I'm facing the problem when replicating contact person from CRM to R/3. It only happen when changing the bp/contact person that paired (with contact person relation type) to more than 5 customer/bp and it always error when replicating to R/3.
    If I trace the probelm in SMW01, the error message appreared is : Updating could not be completed. I'am affraid the workload in R/3 system is to high or the time that given for processing the BDOCS is too short.
    Is there any configuration to set the time for processing the BDOCS from CRM?
    Or is there any solution to solve this issue?
    Please helps
    Many thanks in advance.
    Regards
    eddhie k

    Hi,
    I am facing same problem, have u got the solution for this problem?
    Thanks,
    Harshal

  • How do replicate the contact person to ERP partner fuction from CRM

    All experts,
         I already replicated contact person from CRM to ERP,but the contact person just appeared in tab contact person in ERP customer general data.
         Actually,when i created contact person relationship in CRM,i could assgin contact person to a salse area,so  I want to replicate contact person to tab partner fuction in customer sales area data in ERP. pls give me a  light. thks
    Raymond J

    Hi Raymond,
    I believe the contact person in question is assigned only as a partner function in R/3. Therefore you will only see the usage of that BP as a partner function, but not the relationship specific data.
    You will need to create a contact person relationship for the BP.
    So the relationship specific data will not be visible for a contact person in R/3 which is only assigned as a Partner Function in R/3.
    Can you please check this on your system?
    I hope this helps.
    Best regards,
    Ita

  • SUS-standard process to remove contact person

    Hi All,
    May i know how standard SAP SUS manage contact person?
    Example: Supplier A have created a user by using "Delegated Administration" functionality in SUS portal. If the user had left the company, what will be the standard SAP process to remove the user from SUS system? Do we delete the Business Partner relationship manually? or there is a standard program to remove contact person?
    Please advise.
    Thanks,
    William

    Hi All,
    Can i have your advise on below thread please.
    MM-SUS scenario(differentiate between delegated contact person and replicated contact person)
    Much appreciate it.
    Thanks,
    william

  • CRM 7.0 Contact person in order not replicated to R/3

    Hello all,
    I am currently facing issue with contact persons in CRM orders. There are several partners in the CRM order. Standard ones like ship-to party is replicated to R/3; employee roles are also replicated into R/3 within an order; contact persons (no matter if standard or Z) are not replicated from CRM order to R/3. There is neither no error message in BDOC nor in order.
    Partners are set correctly for mapping between R/3 and CRM (including Z partners) -
    tables CRMPARNR (R/3) and table CRMM_BUT_CONTNO (CRM) checked; GUIDs are there
    Users do change these contact persons manually sometimes.
    If order changed in ERP - including contact persons adding/changing - all partner roles are transfered to CRM for an order correctly.
    Any ideas??
    Thanks for your help
    Radim

    Hello,
    there is an important GUID that need to be determine, the contact persons in my case need to selected via partner determination otherwise the partner gets deleted in R/3. The determination is creating the relation to the partner which is transfered to R/3 and can be checked in the BDoc. This has solved the issue

  • Contact person replicating to crm from R/3

    Hi All,
    When we add a contact person to a customer in ECC, it is not replicated to CRM. 2 BDOC type is created, BUPA_MAIN and BUPA_REL. In BUPA_MAIN bdoc, the guid number and partner number is filled, but in BUT000 table there is no entry. So, in BUPA_REL bdoc the error "Enter at least one number for the business partner" (R11 123) occurs. We cannot replicate the contact person to CRM from ECC.
    Thanks for help.

    Hi,
    Refer to this thread
    Business Partner Exchange CRM -> R/3
    Shridhar

  • Contact persons which are created in ECC but not replicated as  employee

    Dear Experts,
    Where can i find the contact persons which are created in ECC but not replicated as  employee in the CRM.
    For example i created the 10000 personal no in that 800 should replicate to the CRM from  ECC but only 600 is replicated and  remaining 200 i have to find in the ECC to replicate again running PFAL.
    If i have to down lode and compare in excel please provide the details. in which tables i have to down load in ECC and CRM which what input.
    Best Regards,
    Siva Anjith

    Dear Gurus,
    Can you please help to resolve my replication issue.
    Best Regards,
    Siva Anjith

  • Deactivate replication of contact persons from R/3 to CRM

    Hi,
    i'm replicating customer relationships from ECC6 to CRM2007. All fine, including z-partner functions etc.
    One thing Im baffled by however is the replication of contact persons. Contact persons will be created in CRM only, without any integration/replication with ECC6. Since there are existing contact persons in the ECC6 master, I want to deactivate that replication.
    So I hae deleted the mapping for master data transfer in CRM in the IMG under Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
    and Distribution of Partner Functions from CRM into SAP ECC.
    But if I create a contact person in ECC6, it STILL replicates through to CRM!! Any ideas how to de-activate that replication? I don't want to end up with failed BDOCs in the middleware if posible.
    regards
    Jens

    Hi Srikanth,
    thanks a lot for your reply. However the approach needs to be a bit more sophisitcated than that. I do replicate through a number of r?3 partner functions into relationships in CRM, e.g. ship-to and 3 z-functions (promary CSR etc.). That all works fine and needs to stay that way.
    However I do need to deactivate the replication of the R/3 contact persons to CRM.

  • Restrict Contact Person replication from CRM to ECC based on Partner Funct

    Hi Experts
    We are replicating Contacts from CRM to ECC, by assigning them to Accounts. We have a scenario to restrict Contact Person replication to ECC only for specific Partner functions (we have 5 such partner functions), for remaining partner functions the contact Persons should not be replicated to ECC.
    By Partner function I mean, while making this assignment of Contact to an Account in u201Ccontact Person Relationships datau201D under u201CPartner Function Assignment blocku201D (in web UI) we are adding a Partner function E.g. Author, (same can be seen in GUI, under Usage tab of CP Relationship data).
    However we were able to replicate contacts assigned to accounts to ECC in our 5 partner functions, but even the unwanted contacts assigned to other partner functions in CRM are also getting replicated
    How can I restrict CP replication from CRM to ECC based on Partner Functions assigned to the Contact Person
    Your help is highly appriciated.
    Points guaranteed.
    Regards

    Issue resolved using CRMC_BUT_CALL_FU.
    Posing the table name, just in case it might help others.
    Thanks

  • How to restrict/block replication of contact person? SAP CRM 7.0 ehp 2

    Hello fellow crm consultants,
    I am looking for a (hopefully) standard solution to restrict the replication of contact persons (CP) from crm to ecc back and forth while they are related/linked to a customer.
    In this current scenario we create a new customer on the CRM side and immediately link new or existing contact persons to this customer before saving the new entity. Upon save the data is being replicated and creates the same in ECC. However there is not CP replication been setup between CRM/ECC meaning that normally no contact person information is being replicated or synced between these systems. But only when the customer is being replicated including contact person(s) this is information coming through anyways. I want to completely block the CP information and only replicate the customer information.
    Is above possible in SAP CRM 7.0 ehp 2 and how through customization?
    Thanks in advance.. points will be rewarded.
    Regards,
    Rogier

    Hi,
    If you want to replicate only customers from CRM to ECC, you can set a filter in the subscription on IS_CUSTOMER = "X" for example. That will stop replication of contact persons, organization units, employees, etc.
    See following oss note: 1834681 - How to set filter for BP upload from CRM to ECC
    But for something more complex, you might need to implement a function module and add it to table CRMC_BUT_CALL_FU. Kindly check following oss note for an example:
    638628 - No contact person upload into R/3: Example for exit users
    Best regards,
    Nicolas.

  • SUS - Contact person creation for vendor

    All,
    We are at SRM5.0 and using SUS - MM scenario.
    Questions -
    1. How can we assign SU01 user as a contact person for a vendor replicated to SUS?
    2. How can SU01 user id assigned in Org Structure without assigning to any root node?
    Information-
    1. Vendor got replicated from MM to SUS successfully and got created under vendor group.
    2. We cannot use BBPMAININT because standard role SAP_EC_BBP_ADMINISTRATOR is not generated.
    3. SU01 - Vendor user id is already created but not assigned in Org Structure.
    4. Coming back to Q.2 we need to assign this vendor user id in Org Structure without connecting it to any root node. This will generate the BP for user.
    5. Once this is done maybe we can map the vendor BP with user BP via transaction BP or BUP2.
    Request for your inputs.
    Thanks

    Hi Sanjeev and Muthu,
    Thanks for the response!
    However here is the problem as mentioned in my initial post.
    Vendor user id - SU01 is already created which needs to mapped with vendor created in Org Model. Now since the vendor user id is not mapped in Org Model yet, no BP is generated for the same.
    If somehow we can assign the SU01 user id in Org Model then it will create BP for that user and after that we can use BP to link vendor with user.
    We cannot use users_gen at the moment because the vendor id needs to be standalone without assigning to any node. users_gen will ask for the org unit to which this user should be assigned which we want to avoid.
    Create Users transaction cannot be used also since the SU01 id already created.
    Thanks

  • Central Person and Contact person relationship

    Hello Friends,
    I have HR replicated org.struct.where central user creation was active
    I maintained Table T77SO for local user creation
    HRALX  PBPHR  CREATE
    HRALX  PBPON  ON
    HRALX  HRAC      X
    Now i am able to integrate user thru users_gen in org.structure but system is not generation central person for the user
    I want to form the relation of this user as contact person of vendor , When i try to maintain it system is giving error user is not central person
    Please help
    Thanks in advance
    Diwakar Deshpande

    Hello Nishant,
    Thanks for your reply,we are using release 4.0
    We are not using workflows
    My org.structure is HR Replicated and
    we want to use Bidding functionality
    So i need to create contact person for vendor to login to reply BID
    This contact person has to be locally created in EBP and should be integrated
    in Org.structure so by maintaining switches i could do so by using users_gen
    but since system is not generating central person CP when i am trying to create
    contact person for vendor through "Manage Business Partners" its stopping with
    error "Central Person is not created for Business Partner"
    How to resolve this,please help
    Thanks in advance
    Diwakar Deshpande

  • Create contact person for a Vendor

    Hi experts
    Someone could explaim the processes of contact person creation.
    I replicated the vendor from R/3 and now I need to send a BId to this vendor but the sistem ask for a contact person, so I tried go to transaction Manage business  Partner - Employ to Business Partner and tried to create a contact person for this vendor, but when I try to choose a roles for this user no roles is found and is not possible create the user.
    Where can I insert the roles to found when creating the user?
    Thanks
    Nilson

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Re-assign a contact person BP from one bidder org BP to another

    Hi forum members,
    We have a situattion where we would like the ability to transfer a bidder contact person BP from one bidder org BP to another by means of an ABAP program.
    This will prevent us having to block the old contact person and create the same one on a new bidder org.
    Has anyone tried this successfully?
    Thanks,
    Nick

    Pradhip:
    I am not sure about that line - but contact persons are replicable with the correct middleware configuration. 
    regards,
    bill.

Maybe you are looking for

  • New MBP logic board and wireless internet does not work anymore

    hi there i had to change the logic board in my only 2 years old MBP15". i purchased a new one and put it in by myself (relatively easy task). i still use the same internal HD as this one still works fine, so all data are the same. however, the new lo

  • Data1.cab file not extracted when installing Acrobat X on windows under VMWare Fusion 4.0

    When extracting the files to the installation folder, the Data1.cab file is created but it is o kb value. Then when running the setup file, there is an error generated because the setup cannot see a valid data1.cab file

  • IMovie won't display edited images

    Here's the story: 1. copy a photo in Camera Roll 2. crop the photo 3. save it 4. in iMovie the thumbnail displays the cropped image 5. insert into video and the UNcropped image is displayed Easy to duplicate on various iPads using ios7 and upgraded i

  • Image Capture not working anymore

    I use Image Capture to get photos off my Canon XSi. Lately, it hasn't been working. Image Capture shows 26 CR2 icons (without the camera even being plugged in), but won't show their thumbnail previews. It won't download them, and I can't delete them,

  • Iphoto keeps on finding about 1500 new picture and wanting to import them.

    Any ideas on how to stop this ? I have removed all photos onto external drive and delete all the backup folders. but these 1500 photos keep on coming back, very frustrating !!!! Grrrr any ideas?