Replicating customer from R/3 to CRM found Acct group y001 do not exist

Hi gurus,
I tried to replicate the customer master data from R/3 to CRM. Using Tcode SMW01 i found out that Account group Y001 do no exist.
Note:
Y001 is the account group i created in R/3. I also assigned it to CRM grouping Y0 using tcode PIDE.
Kindly help regarding it.
Regards,
vimal

You can copy exactly error ??..
For replication you need use tx PIDE in R3.
In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

Similar Messages

Flow of customer from ecc 6 to crm 5

Hi Gurus,
I trying to downlaod the selected customer to the CRM by using filters but iam not able to get the data .
The following objects only i have initially downloaded for the customer master record
1. DNL_CUST_BASIS
2. CUSTOMER_MAIN.
The following configurations i have down
1. Defined the number range in the ECC internal number range
2. Account group in ECC
3. Defined the number range in the CRM external number range
4. Grouping
5. Mapping ECC to CRM.
the following filter settings i have down for the CUSTOMER_MAIN
Source Site Name : ECC
Table : KNA1
Field : KUNNR
OP : Equality
Low : 0000400001
High : 0000400002
when i do the initial down load and the status is green in r3am1 but in smw01 i found the following error
1.Acct Group Z001 do not exist
2Message no. BUPA_MW_EXCHANGE010
3.Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN. Message no. SMW3018
so can anybody tell if i have missed any step or what i have to do
Thansk inadvance

Hi Devi,
First Download Adaptor Object
DNL_CUST_KTOKD
and then try to download the BP master.
Secondly, please correct the filter settings
Table : KNA1
Field : KUNNR
OP : Equality (Correct it to Between)
Low : 0000400001
High : 0000400002
Best Regards,
Pratik Patel
Reward with Points!

Error while Replicating Objects from R/3 to CRM

Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimal

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Delta download of customizing from R/3 to CRM

Hello Gurus
Need help. I am trying to automate download of customizing changes from R/3 to CRM.
Example:
I create a new shipping condition in customizing in the R/3 /Logistics Execution->Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Define Shipping Condition/. In other words a new entry /ZZ/ into the table.
I hope for an automated upload of the new entry from R/3 to CRM, instead when I used the new shipping condition for a Business partner I received in SMW01 /The shipping condition ZZ does not exist/
What was done:
R3AC4 - Set Up Delta Load set up object CONDCUSTOMIZING from the R/3 RFC connection with entry:
00503308 / CONDCUSTOMIZING / CRS_MAINTAINANCE_CHECK - this entry appeared after initial download
TX: R3AS - downloaded object: DNL_CUST_SHIP
TX: R3AM4 - object green
On the R/3 side in table TBE31 the event exists with the correct function
What am I missing please?
Any hint will be rewarded!
Thx
Martin

Hello Martin,
as much as I know there's no delta download of customizing from R/3 to CRM (at least up until CRM 4.0).
This means that you have to start download object DNL_CUST_SHIP as soon as you maintain a new shipping condition in R/3.
I had this problem a year ago. I solved with the following workaround:
1. Create a variant for report SMOF_DOWNLOAD containing download object DNL_CUST_SHIP
2. Plan this report as job running every hour or so.
The only problem is if you maintain a new value in R/3 and use this new value with a R/3 customer before the download ran.
Regards
Wolfgang

CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

Hello All,
We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
However, when I login into the WebUI, I get an error message as follows:
404 Not Found
The requested resource does not exist
Details: Go to main page of this application
I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
I kindly request to provide some pointers towards the resolution of the same.
Thanks and regards,
VSK.

Hi,
please try to activate all SICF services under sap->bc->bsp.
If needed deactivate them and activate afterwards again to be sure all services are active.
Good luck
Kind regards
Manfred

404 Not Found, the requested resource does not exist

Hi gurus,
We're faciing an issue where when we submit data back to the SRM shopping cart from the MDM catalog UI, we intermittently get a "404 Not Found, the request resource does not exist" error page.
Below is the HTTP trace upon item checkout:
POST     200     text/html; charset=UTF-8     https://server/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App?sap-wd-cltwndid=0cf753a3797111dfa7c662676002500a&sap-wd-appwndid=0cf753a4797111df966b62676002500a&sap-wd-norefresh=X
GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js?7.0103.20091012142306
GET     404     text/html     https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html
GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/blank.html?7.0103.20091012142306
GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backprevention.html
GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backdummy.html
GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
The page https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html is where the 404 error is being generated. And this error is also intermittent, so some time, the page will load with GET 200, but other times, it will show GET 404.
Does anyone know what this ProductForm#####.html does? The ##### is a numerical value that seems to be incrementing on every catalog submission back to SRM shopping cart.
MDM build 03.69
Thanks.

Sudhanshu appreciate your quick responses and the intermittent error is what's troubling me as well.
Let me run through the SRM SC scenario for example:
1. In shopping cart professional > Add Item > SRMMDM Catalog
2. In the SRM-MDM catalog > Add an item to cart > Checkout
3. After checkout, is where the intermittent error comes. Sometimes, the ProductForm.html is generated without a problem, and the product data is returned to the SRM SC in line 1.
4. When we're back in the SRM SC professional > Add Item > SRMMDM Catalog to punchout to the catalog again.
5. Again, in the SRM-MDM catalog > Add an item to cart > Checkout
6. Boom...the ProductForm.html page generates a 404 error.
The scenario is similar from SUS to MDM, where for example, the first (or second or third) MDM punch out works, then all of a sudden, the 404 error is generated and it's always at the ProductForm.html where the 404 code is given. I have yet to find a pattern to see what triggers this 404 error. Sometimes the first MDM punchout will generate this 404 error. Sometimes it will work up to 4 or 5 punchouts before the 404 error is generated.
I'm have our BASIS team do a thorough analysis at the portal level to look for errors and still waiting for SAP's response.
Another interesting thing is that this ONLY happens in our dev box. In our QA box, we don't see such a behavior.
Thanks for your time!

Web Dynpro image not found: The requested resource does not exist

Hi everybody,
I'm experiencing a strange Poltergeist, so I would like to cry out the issue and hope any kind sould could help me
In my WebDynpro application, I show a JPG picture which is located in the own project, that means in "src/mimes/Components/metromadrid.net.formacion.Cursos". The image appears correctly in my Development environment, but when the activity is moved to the Consolidation System (I'm using JDI), the image doesn't appear. If I try to access it directly, via URL, the messagen shown is "404 Not found: The requested resource does not exist.." (the URL accessed is http://hostname:port/webdynpro/resources/metromadrid.es/formacionapp/Components/metromadrid.net.formacion.Cursos/foto_vacia.jpg)
The point is that in the same Consolidation environment I have already some applications with images, which are found and loaded without any problem.
I have checked if the image appears in the corresponding active repository and everything seems alright (I mean I can see the file there).
Any idea? It would be really appreciated, since my time to solve the problem expires in few days...
Thank you very much in advance!!
Isidro Lopez

Hi Isidro,
your mime files were most probably not added to your NWDI activities when developing your Web Dynpro DC. This means when adding these mime files to the src/mimes/<comp package>.<Comp name> folder the Web Dynpro Tools have most probably not detected the new mime files. When testing your application on in your local development environment all images appear as they exist on your local file system. As missing mimes do not cause a CBS build failure you won't encounter a designtime error.
Please check whether the corresponding mimes are listed as 'local only' (house symbol) in your DTR perspective. In case they are listed as 'local only' you must explicitly add them to an activity.
I have also encountered this missing mime problem before but I have not started any investigation to really determine the reason for it.
Best regards, Bertram

Alert Configuration : 404 Not Found The requested resource does not exist

Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
Shikha

Hi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha

Replicating Custom Fields for Products in CRM from ECC

Hi All,
I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
 this new settype to MAT_HAWA. (As all our materials fall under this material type).
2. I am looking to map SAP standard field from ECC to this custom field of mine.
 I wrote the code in CRM BADI
 'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
DATA: ls_category_bdoc TYPE COMT_PROD_CAT_REL_MAINTAIN,
 ls_category TYPE COMT_PROD_CAT_REL,
 lt_categories TYPE COMT_PROD_CAT_REL_TAB,
 ls_settype TYPE COMT_settype_ext,
 ls_cat_settype_rel TYPE COMT_CAT_FRAG_REL,
 lt_cat_settype_rel TYPE COMT_CAT_FRAG_REL_TAB,
 lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
 CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
 EXPORTING
 IV_SETTYPE_GUID = ls_cat_settype_rel-frgtype_guid
 IMPORTING
 ES_SETTYPE = ls_settype
 EXCEPTIONS
 NOT_FOUND = 1
 NO_IMPORT_VALUES = 2
 NO_TEXT_FOUND = 3 .
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
CASE ls_settype-frgtype_id.
 WHEN 'ZMASTER_INFO'.
 ls_ZMASTER_INFO-relation-owner = 'X'.
 ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
 ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
 ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
 APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
 APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
 ENDCASE.
ENDLOOP.
Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
Could anyone please suggest if i am missing anything here? Any help is appreciated.
Thanks,
Karuna.

Hi Karuna,
One more solution is to change the BDoc data content before it hit the Database.
this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
Best Regards,
Pratik Patel
Reward with Points!

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Organisation Structure is not replicating completely from R/3 to CRM

Hi SAP Gurus,
Plaese help me out in this issue.
We are replicating organisation structure from R/3 to CRM. There is Org Structure in which there are some sub org units say 6, under main org unit with positions and jobs. When try to replicating by tcode PFAL with evaluation path OS-CP, it geneartes IDOC in R/3, all are succesfully processed and Green. IN CRM, these Idocs are red and yellow with staus 51 and 52. As a result of this partial, org structure is replicated to CRM. In CRM, the Idoc is failed and It shows following errors:-->
1. Resource key 4AFBD7B949F406E9E10000000B7404B7 is not known (Status 51)
2. HR: ALE inbound processing for HR master data (Status 52)
3. No Filter, No Conversion, No Field converted.
Plaese advice to resolve this issue.
Thanks a lot,
Kind Regards
Ash
Edited by: Raman Khatri on Nov 23, 2009 2:43 PM
Edited by: Raman Khatri on Nov 23, 2009 2:47 PM

You can copy exactly error ??..
For replication you need use tx PIDE in R3.
In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

Business Partner not replicating automatically from ISU system to CRM

Hi All,
        We are working on transferring BP from ERP to CRM. Following are the main ways that we are using for the same :
1) We are creating reference customer with role Sold-to-party in transaction VD03 using internal no range.
2) Then we are creating ISU BP using the internal same number range and giving the above created customer no as reference customer and finally saving it
3) We have maintained the settings in PIDE from R/3 to CRM as :
Sold-to-party     B   ZD02 External Checked
DEBI                B   ZD02 External Checked
We are using BUPA_MAIN as Bdoc.
I get the follwing Bdocs in CRM system :
1) In SMW01 in CRM I am getting the reference customer created in Step 1 as automatically replicated to CRM and in Success state
2) Also I get the Bdoc in Error State for ISU BP created in Step 2. Then if I try to pull the BP it comes in Success state.
My problem is that the BP Bdoc should automatically come in Success state in CRM.
Please help me solve this problem.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Error while replicating employees from R/3 to CRM. BP no. are not created

CRM Experts,
Request your help in solving the following issue.
While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
Message:
IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
Immediately processing not possible: Screen output without connection to user.
Steps:
1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
3. The BP number is not getting generated.
Really appreciate your solutions/suggestions/clues.
Thanks in advance,
Vijay

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Error in SMW01for BP while replicating data from R/3 to CRM

Hi Experts,
While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
Can anyone please help me on this.....
Regards,
Rahul

Hi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. Reconnecting the CRM system to a new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful.

Material description is missing when replicating material from R/3 to CRM

Hi Experts,
I am facing middleware error.
I have replicated a material from R/3 to CRM system.
I am able to see all the details in CRM except the material description in CRM.
The material i have replicated from R/3 to CRM has a description in R/3 but the same description is missing in CRM and it is showing blank.
Please help me to solve this.
Thanks

Hi,
Go to the COMM_PRSHTEXT see the table entries is there are not. Pass product GUID in this table and check.
Regards
Srinu

Replicating customer from R/3 to CRM found Acct group y001 do not exist

Similar Messages

Maybe you are looking for