Replicating data from IS-U to CRM

Hi,
I have the following query.
I have to replicate the data from ISU to CRM for BP, CA, Move-In and CO and Premise. Please tell me how it can be done?
Thanks,
Sachin.

There's a cookbook on replication on the service marketplace. It should provide all the info you need to start setting up replication.

Similar Messages

  • Error in SMW01for BP while replicating data from R/3 to CRM

    Hi Experts,
       While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
    Can anyone please help me on this.....
    Regards,
    Rahul

    Hi Rahul
    As stated above this will happen in case the number is already assigned to a business partner.
    Are you
    1. <u>Reconnecting</u> the CRM system to a  new R/3 and the CRM system has data from an old system?
    2. Has the replication been done before
    3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
    Rewards points if this was helpful.

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

  • Downloading Master data from R/3 to CRM

    Hi all,
    Inorder to download Master data from R/3 to CRM, first we need to download all relavent customizing and condition objects, is this is the correct procedure. Pls anyone clarify this.
    If we make any changes to the data in R/3 which is already downloaded to CRM, will those changes replicate in CRM, inorder to replicate those changes in CRM what are the necessary things to be done.
    please anyone clarify on this
    Thanks In advance
    Phani Kumar TN

    Hi Phani -
    You will need to download all the condition and customizing objects which are relavant for the data you are replicating. Else you will get errors.
    Ans to 2nd part of your Q - you can do this by doing a delta load.
    I have some documents which u may find useful for this. Let me know where I can e-mail that.
    Cheers,
    Aarthi.

  • Upload data from Excel to Sap-Crm

    Hi All,
    I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

  • Upload data from Excel into SAP CRM using webservices

    Hi,
               I want to upload the data from EXCEL into SAP CRM using a web  service, can anyone say me the process and also how to map the excel and the source code structures.
    Thanks,
    Sanju.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

  • Error while Replicating Objects from R/3 to CRM

    Hi,
    While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
    I am working on CRM 5.0
    Regards,
    vimal

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • Error message in pulling data from R/3 to CRM

    Hi,
    I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
    As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
    Please help.
    Thanks.

    Hello,
    according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
    Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
    Best regards,
    Christian

  • Error in pulling customer master data from R/3 to CRM

    Hi,
    I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
    Is there anyone knows any recent updates from SAP that might solve this problem?
    Please help.
    Thanks.

    Hello,
    it seems your customizing of ERP and CRM is different in this area.
    Please try a new initial load for all the customizing objects which may be responsible:
    DNL_CUST_BASIS
    DNL_CUST_BASIS2
    DNL_CUST_BASIS3
    DNL_CUST_BASIS5
    DNL_CUST_BASIS6
    DNL_CUST_BNKA
    DNL_CUST_KTOKD
    DNL_CUST_PRC
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_PROD3
    DNL_CUST_SPROD
    DNL_CUST_TVAST
    DNL_CUST_TVFS
    DNL_CUST_TVKN
    DNL_CUST_TVLS
    We do every week a new load of this objects using a background job.
    Alternativly you could investigate which customizing object is the correct one and only load this.
    After this new load retest your scenario.
    Best regards
    Manfred

  • Uploading data from R/3 to CRM

    Hi Gurus,
    We have the following scenario:
    Our customer master data is created and maintained in R/3.  Now we need to create and maintain in CRM.
    1.  we need to bring R/3 customer to crm and start maintaining only in crm
    2.  there should not be any number overlap
    eg. 1000 customers in r/3 starting no. 1 to 1000, we need to bring this customer to crm and start maintaining in crm.  then from cusotomer no. 1001 onwards need to create from crm.
    Can anybody help me on the steps to be followed and the configuration settings to be maintained. How the number ranges have to be maintained and what settings should be done in CRM and R/3 before transfering the data.
    Also the steps on how to upload data from R/3 to CRM??
    Thanks.
    Divya Gupta

    Hi Divya,
    Create 2 different number ranges and groupings and assignement in CRM system
    For Ex:
    Create a number range(External) with 1 to 1000 and create a grouping ABC and do the assignment(R/3 customers)
    Create a number range(Internal) with 1000 to 100000 and create grouping XYZ and do the assignment (New customers)
    we need to bring R/3 customer to crm and start maintaining only in crm
    Do the following settings in R/3 system to bring the customer data from R3 to CRM
    T Code: PIDE
    Select R/3->CRM: Assign Account Grp. to BP Classification
    Select the Account group which is created in R/3 for customers and set classification as B and select the grouping  as ABC(Defined).
    and start initial download in CRM system with T.Code R3as
    Load Object  =  CUSTOMER_MAIN
    Source Site (Sender)  = R/3
    Destination Site (Receiver) = CRM
    and Execute.
    It will bring the customer data from R3 to CRM.
    While creating new customers in CRM system select the grouping as XYZ to avoid overlaping.
    Regards
    Narayana

  • How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

    how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
    Plz suggest me any BAPI or IDOC for that ..
    thanks in Advance .

    You have to convert your long string to a table of shorter strings.
    There may be other ways, but one possibility is to use a loop to process you string.
    while (there is something left)
       put the next e.g. 1024 characters in a new row of your table
    endwhile
    If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
    Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

  • Download data from ECC6.0 to CRM

    We want to download data from ECC6.0 to CRM 2.0.
    I am facing an error while trying to use Function  module 'SMW_CALL_MIDDLEWARE'
    to create and post BDOCS in CRM 2.0.
    The BDOCs are getting posted successfully. However, function module is updating 
    only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

    I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

  • Initial Load for Master Data from R/3 to CRM

    Hi Middleware Experts,
        I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
    1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
    2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
    Please suggest whether it can be done or not and which is the better option.
    Regards,
    Rahul

    Hi Rahul,
    Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
    When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
    <b>Allot points if my post helps!!</b>
    Best regards,
    Vikash.

  • Replicating customer from R/3 to CRM  found Acct group y001 do not exist

    Hi gurus,
    I tried to replicate the customer master data from R/3 to CRM. Using Tcode SMW01 i found out that Account group Y001 do no exist.
    Note:
    Y001 is the account group i created in R/3. I also assigned it to CRM grouping Y0 using tcode PIDE.
    Kindly help regarding it.
    Regards,
    vimal

    You can copy exactly error ??..
    For replication you need use tx PIDE in R3.
    In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
    In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
    Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

  • Document/customer pricing and replication of pricing data from r/3 to crm

    Hi,
    can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
    once it is replicated  to crm what customization is require in crm.
    tel me abt customer and document pricing procedure, how it will be effected in the transactions.
    plz any one help me to know this scenarios.
    thanks
    kumar

    Hello Sathish,
    Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
    Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
    Easwar Ram
    http://www.parxlns.com

Maybe you are looking for