Replicating DataSource in BW

I have check that the data source's (2LIS_08TRFKP, 2LIS_08TRFKZ, 2LIS_08TRTK, 2LIS_08TRTS, 2LIS_08TRTLP) are in RSA6 and active in the LBWE.  When going to RSA1 to replicate the metadata the only datasource that I can see after searching is 2LIS_08TRFKP.  Any suggestions/help would be much appreciated.

are you able to do Test Extraction @ RSA3 for the DS which were not replicated to BI ?
Normally when you do replicate you should get all the DS which are activated @source system .. RSA6  - select DS - click on Transport icon and replicate in BI again
What is the Version of R/3 ?

Similar Messages

  • What will Happen in R3 side while Replicating Datasource

    Hi Friends,
    what will happen in R3 side and BW side while replicating datasource in BW side
    Thanks & Regards,
    Gowri

    Hi Gowri,
    Replication needs to be done only when you change the extract structure which in turn would change your datasource. The simplest way to know when replication needs to be done is each time you save you datasource in R/3. This causes the timestamp of the datasource to be changed and hence the timestamp of the datasource in R/3 and BW are not in sync. Replication would make the timestamp in sync in both R/3 and BW.
    Hence you would notice the error "Timestamp error" when you do not replicate the datasource after changing it.
    Also check this link:
    Re: time stamp
    Bye
    Dinesh

  • Replicated datasources transportation

    i have created TR for  all the datasources (3 generic and 1std(3.5)) in ecc DEV.I ahve also created TR for replicated datasources for the above in BWDev.
    so, once the ECC DEV to ECCQA moves , DO I NEED TO REPLICATE THE DATA SOURCES AS I  HAVE GOT REPLICATED DATAOUSRCES   IN BWD ev?
    2. what would happen if i manually replicate the datas soruces in BWQA, then transport replicated datasources from BWD evto BWQA
    3.  if i need not activate manually the  datasoruce in ECCQA, then  i should wait for the replicated datasources to reach BWQA, and then only transport other request?
    4. how to transport  ONLY PSA? what are the necessary steps to be taken?

    Hello,
    There is no harm in replicating the datasource in BI QA box...once you replicate them to get them activated you can send the transport request...
    ARE u saying that after manually replicating in BIQA, the replicated datasources request from BIDEV to BIQA would activate the dataosources in BIQA?
    Even if you dont replicate and send the replicated request it will do.
    What i understand is that i can simply transport the ECC request to ECCQA , then just transport the replicated datasources from BIDEV t BIQA for replicating the datasources and then after this all the other BI requests should be imported?
    my concern is that if i manually replicate the datasources in BIQ, then start importing all the BI request and  i ahve got first 3 replicated datasources followed by other requests. so ,after the manual activation, once these replicated datasources moves, should i wait for reactivation  of all the datasources and only then transport request of the  transports?

  • Error while Replicating Datasource from R/3

    In R/3 extraction, after activating the datasource in R/3 and replicating the datasource in BI, I received an error saying that 'SQL error occured when accessing a table' with Message no. RSAR051... Help me in this.

    I checked in ST22. But there is no problem in it. Pls give me the solution..

  • Replicating Datasources

    Hi All
    We have BI system connected to R/3 system. Now our Qual R/3 system is upgraded from 4.6c to ECC 6.0. Now the BASIS is trying to connect Qual R3 and Qual BI system. When we rt. click on source system in RSA1, it says at the end: datasource cant be saved to the datasource : 3.x 0material_attr. whats this mean ? It says with the same name, RSDS datasource exists.
    What steps we have to do immdly when a R/3 system is upgraded ?
    1) do we have to do something in R3 also with the DSs ?
    2) If the replication on Rt. click on Source system fails with the above error, what should i do ?
    can i manually replicate that datasource in RSDS ? I dont see that DS too in my BI. So why it says to be replicated ? Should i restore it as 3.x or RSDS ds ?
    Thanks
    venkat

    Hi,
    There may be some data sources missing after R/3 upgrade to ECC6.
    Search OSS notes for the same.
    See Note: 735646 for missing FI Data Sources.
    Cheers
    Praveen

  • Replicating Datasources - IMP!!

    Hi Experts
    In the R/3 environment current is running COPA costed based.
    I have been created a new datasource for COPA Accounted based model in R/3,
    and now I need replicate datasources in BW.
    In dont know in detail de R/3 instalation, and what datasources are active or modified..
    a) Is there any risk / danger if I replicate all datasource in BW?
    b) May be possible that, any extraction that is running OK now, have a faillure?
    Thank you in advance!

    By default the COPA data source will be present in the node SAP application components>Controlling> Profitability analysis.
    Try replicating just this node and the newly created COPA DS should come to BI.
    The only issue about relicating the whole datasources would possibly be the amount o time taken.
    So it is recomended just to replicate the relevant node.
    Also, this replication is not going to impact any other extraction process.
    To answer your two Q's although I have done that above:
    1. Only factor is time.
    2. There would not be any such case.
    Naveen.A

  • Replicating Datasources Problem

    All,
       When I try replicating the datasources from ECC, after replication, the data sources in 7.0 show that M is not equal to A version. This is happening in case of all the Datasources. What is the problem? How to I make in M = A

    Hi,
    Before going for data source replication in bi side. check weather that data source is active in r/3 side and also do the transfer datasoure in r/3 side.
    first install that data source from BI content. then do transfer from r/3 side. finally replicate that DS in bi. check with it.
    Regards
    Harikrishna N

  • Replicated Datasource

    I have replicated the data source and trying to update my transfer rules to reflect the new field which I added into my Master data attribute.
    I have the new field in the Lfet side (Data Siurce/Trans.Structure/TR)..and nothing assigned to it. But in the right side (Assign Infoobject field).. I dont see the new field to assign..
    How do I do this ?
    Please help

    I think we have some confusion here (screen shots would help right :-)...You have the New IO in the comm structure and it is Black. Now in the transfer rule part of the screen (lower part), on the left hand side is the box called Assign InfoObject-field.
    Here can you see the new field from the datasource?
    Is there any InfoObject assigned next to the field?
    Can you try to type in the name of your new IO here?
    Can you use the button to the left of Start Routine (on top of the right hand box called Comm Str/Transfer Rules) and look for your IO?

  • Prolblem while replicating datasources in BW, source system tab in modellin

    hi friends,
    I have a problem. we are using SAP NetWeaver 2004s and we are implementing for the first time. The problem is we have activated the datasources of 0FI_AR_4, 0FI_AP_4, 0FI_GL_4 from delivery version RSA5, After activation we checked in RSA6, and even the data is available we checked in RSA3 also. when we go to SAP NetWeaver 2004s to replicate the datasources, i went to source system and after double clicking on the Source system a new datasource screen is opened, there i found the datasource to replicate and i selected the datasource context menu there i got a option to replicate metadata i clicked it.
    Here the real problem is coming i am getting a NOTEQUALLY symbol is coming (msg is M Version is different from A version).
    After this i went to Business content and acvtivate related infocube and related infosource. I click on the infosource and assigned the SS and ther i am not getting the datasource, can u any one please guide the entire process in BW to replicate the Datasources from SS.
    Kindly Reply me ASAP
    PAVAN KUMAR K

    Heads up...
    <a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=145443&messageID=1640573">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=145443&messageID=1640573</a>
    <a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=171086&messageID=1917978">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=171086&messageID=1917978</a>
    <a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=163462&messageID=1859808">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=163462&messageID=1859808</a>
    Hope it Helps
    Chetan
    @CP..

  • Urgent!!Error While replicating Datasources!!

    Hi BW experts!
    Could any help me how to resolve the the datasource replications error if it exceed length the field name & data length of the field..??
    <b>Error:     Fieldlength too long for PSA fields
    Error     Field QUEST_RATINGFACTOR ( Position 24 ): Field name is longer than 16 characters</b>
    Thnx in advance

    Hi,
    Are you working on SRM as source, if the name length is more than 16 characters it is not required....you can reduce the characters in the backend SRM and again reload.
    For invalid character you can go to RSMO and get into details tab to find out the actual invalid character. Sometimes small cap and capital can reasult in this issue.
    Thanks
    Abhi

  • Error Replicating DataSource to BW .....Urgent

    Hi All,
    During replication of DataSource from our CRM to BW we selected <b>Replicate as DataSource</b> somewhere and all the datasources except Hierarchies are save as DataSources and <b>not as DataDource 3.x</b>. Can someone tell me how to change all DS to DS 3.x, there are more then 600 of these so individually its impossible for us to do.
    Thanks & Regards,
    Vikas Sharma

    Hi Vikas,
    try:
    ( see chetan's reply).
    /message/1870535#1870535 [original link is broken]
    assign points if useful ***
    Thanks,
    Raj

  • Replicating Datasource in BI7 when there is data in PSA

    Hi all,
    We are working on CRM opportunities item data with 0CRM_OPPT_I datasource. There is a change is the mapping in BWA1 and we are moving the datasource to quality. Now as of BI7 if we replicate the datasource in quality the existing datasource in BI will become inactive and we need to activate the datasource once again. If the datasource contain PSA data in quality, how do we activate the datasource without impacting the existing data. Is there any different approach in BI7 with which we have to handle the replication of datasource and activation of datasource while moving across quality and production systems.
    Regards
    Vijay

    Tha datasource replication must be only made in DEV in Q you must transport the datasources....
    Regards

  • REPLICATING DATASOURCES FROM ERP

    Hi,
    I am trying to replicate datasources from the ERP system.However when i select the ERP source system and click to replicate datasources,it prompts to save the datasource 1_CO_PA3001001 as a 3x datasource.(which i did).After the successful replication, it tells me to go to the new datasource and activate it.I went in the datasource section but i cannot seem to find the new datasource.I ever tried the find icon.Could someone guide me on this?
    Thanks
    TJ

    Transaction Codes - RSA5/RSA6 would help you to build your datasource.
    Once datasource is created,In BW chose the right source system & then application component & replicate the datasource.

  • Datasource not replicated in Production Environment

    Hi all,
    I activate a datasource 2lis_04_p_comp in SAP R/3 development environment and replicate it in BW development environment. All works are OK.
    Then I transport this datasource in R/3 production environment a first time, then a second time after several modifications on my datasource. All transports and activation (first and second wave of transport on this datasource) are OK between development and production environment (on R/3).
    2LIS_04_P_COMP is same (on R/3) between development and production environment.
    But when I want replicate 2LIS_04_P_COMP in BW production environment, several fields are not replicated. Only fields wich are transported in first wave are replicated in BW production environment. Fields which are added (after datasource modifications) and transported in second wave of datasource transports, are not replicated (Datasource contains these fields on R/3 development and production environment). Whereas in development environment all fields are correctly replicated.
    I think, my problem stems from replication in BW production environment.
    How can I replicated all fields in my BW production environment ?
    Thanks,
    Rgds,
    Sébastien

    hi,
    Can u check the transport log for 2nd time transport from R/3 Dev to R/3 Prod...
    Did u see all the changes in R/3 prod for DS 2LIS_04_P_COMP ..
    try this again..
    R/3 prod
    RSA6--> Select 2LIS_04_P_COMP Click on Truck icon -->
    BW Prod
    RSA1--> Source Sys tab > Select ur SS> RightClk and Replicate Datasources
    If u still missing some fields .. come back to us
    Thanks

  • Two nodes under Transport Request for Datasources

    Hi all,
    I need to transport 3.x DataSource  from DEV to PROD.
    Using TRANSPORT CONNECTIONS I have added all required Datasources in my transport request.
    In SE10 I can see 2 nodes under my transport request.
    DataSource Replica
    DataSource (Active Version)
    All Datasources are shown in DataSource Replica but a few of them (not sure why) in DataSource (Active Version).
    I wanted to know the if this is the right way to transport ???
    Will it result in an error while transporting to PROD ???
    Please help me in clearing my doubts.
    Regards
    Shalabh

    Hi,
    U need to transport the Data source replica as well when ever u transport ur DS for the first time.. along with the ur DS...
    So make sure that u have collected IS, DS, DS replica, TR, UR, IO if any and targets.
    Thanks
    Assign points if this helps

Maybe you are looking for