Replicating material from R/3 to SRM problem

Hi experts I have done all configurations for material replication from R/3 to SRM but an error still occuring When I start the initiao load I can see inSMQ1 of backen 2 entries R3AD_MATERIA* and MASS_SRM_MATERIA*
in status STOP, and some materials are replicated but some materials are not replicated even if a request is created, I could see that some problems could occur if I have set language for user remote or RFC, but im my case it`s in blank, IF I change the RFC to unicode this problem could be solved?
Thanks
Nilson

Yes. Unicode RFC is recommended when you are using diff languages.
also check in SMW01 about the BDOC status.
Spoollist in this TXN can give you further info for the stoppages.
BR
Dinesh

Similar Messages

Transfer of material from R/3 to APO, Problem in Integration model

Hi
I have created Integration model for Transferring material from R/3 to APO.
While activating the model, it is giving error with status as i..e. SYSFAIL
On clicking the status, I am getting the following message
"Logical system R3CON does not assigned to Business System Group"
?Where to locate the BSG in R/3 and assign before transferring matl to APO
i require the steps&help to solve the problem.
Thanks in advance to all members for the help.
Srikanth

Dear Srikant ,
Pls check you have followed the below steps in the same sequence for R3 and APO
CIF Settings in R/3
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
CIF Settings in APO
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Set up business system group
Create BSG /SAPAPO/C1
Assign logical systems to BSG /SAPAPO/C2
Maintain distribution definitions /SAPAPO/CP1
User parameters for CIF /SAPAPO/C4
You have got stuck up somewhere in R3 setting , which I have marked in italic font i.e.Assign target system and queue type CFC1
I hope this will solve your problem .
Thanks ,
Digambar

Material description is missing when replicating material from R/3 to CRM

Hi Experts,
I am facing middleware error.
I have replicated a material from R/3 to CRM system.
I am able to see all the details in CRM except the material description in CRM.
The material i have replicated from R/3 to CRM has a description in R/3 but the same description is missing in CRM and it is showing blank.
Please help me to solve this.
Thanks

Hi,
Go to the COMM_PRSHTEXT see the table entries is there are not. Pass product GUID in this table and check.
Regards
Srinu

Error replicating materials from R/3 to SRM

I had to delete all materials from SRM master record to replicate agaim the materials object MATERIAL.
I have for my country one table CRMM_PR_TAX that contaim tax datas that comes with object MATERIAL during replication, after deletion I started the new replication and an error occurr:
Data cannot be maintained for set type CRMM_PR_TAX
Diagnosis
The data for a set can be maintained only if the product is assigned to a category to which the set type is assigned
Procedure
Check whether the product is assigned to a category that allows the set
Please someone knows can I chect it and configur agaim.
Thanks
Nilson

Hi
Please go through the links below ->
Note 1039863 - COD Performance : Problem with table CRMM_PR_TAX
Set_types - Replication from Backend to SRM
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Set type 380BDF7B502D63F7E10000009B38FA0B does not exist
Note 381051 - Leasing: Category not found financing
Re: Mandatory set types
importnace of set type in comm_hierarchy transaction
Hope this will definitely help. Do let me know.
Regards
- Atul

Help to Create a Generic Material from Idoc

Hi everyone, We have a problem to create a variant from Idoc, our problem is which segments to fill and how to do this?, For create an individual material is ok, we create a material from Idoc Artmas3 without any problem, but when we want to create a variant we had the following error
Message MH197
"No value assignment transferred for the variant-creating characteristic..."
Someone of you had created generic materrials? How do you fill the segments? Which Idoc do you use?,please help us
Regards

Hi,
Initially create a view or identify the table to create generic extractions, remaining process is same in all data bases such as CRM........
GENERIC EXTARCTIONS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/generic%2bextraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if these are useful.
Rgs,
I.R.K

Error while replicating Material in SRM 7.

Hello,
I am facing the problem while replicating the material from backend system I have successfully replicated product categories and other.
BDoc failed while replicating the material from ECC system give me below message in SMW01 TCODE
"Mat. for Initial Download: Table not supported by function"
"Specify the relevant unit of length"
"Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT."
Do you have any idea regarding above issue.
best regards
vp

Note 872533 - FAQ: Middleware
Frage 5. Troubleshooting error messages
Examples for /SMW01 BDoc errors during the initial load or delta load:
E:SMW3 018 - Validation error occurred: Module &1, BDoc type &2.
E:SMW3 046 - No extended data for BDoc message &1 found.
E:SR 053 - &1 &2
E:COM_PRODUCT_API 003 - Category for product hierarchy & does not exist
E:COM_PRODUCT_UNIT003 - Specify the relevant unit of length (Entering the dimensions is mandatory since Note 29101).
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT

Problems in replicating plants from ERP

Hello Experts,
In the process of setting up SRM 7.0 system, We are running into some problems while replicating plants from ERP.
1. BBP_LOCATIONS_GET_FROM_SYSTEM takes a very long time to execute.
2. I can see few plants replicated in BBP_LOCMAP table, but when I search for locations in the org structure, it says no values found.
3. I used the BP number in the BBP_LOCMAP table and searched for business partner details in BP trxn, even there it shows BP number does not exist.
If anyone has encountered similar problems please throw some light in resolving these issues.
Thanks, AV

Hi Muthu,
The program is going in endless loop because there was some memory dump in ERP. We have resolved the issue and have successful in running the program, but In SLG1 there are errors -
1. Business Partner "0000000x" does not exist
2. Error Changing Location.
Somehow the plant entries are shown in BBPLOCMAP tables with the BP numbers even though system is not generating the business partner numbers.
I am guessing problem might be with the business partner number ranges, but I have checked everything and couldn't find any issue there either.
Did I miss anything else?
Thanks, AV

Errors while replicating Materials from ECC to SRM

Hi All,
I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
All the Prod type & Prod category have been replicated into SRM from R/3.
And no materials have copied in SRM.
how to resolve this ?
regds,
CB
Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

Hi,
DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
Upon checking in SMW01 i got the above errors as
" Category for material group 013 does not exist
Message no. COM_PRODUCT_API002
Diagnosis
If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
Procedure
Check whether the material groups have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1"
Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
Regds,
CB

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Vendor not found while creating SC after replicating from r/3 to srm

Hi all
I tried to replicate some vendors from r/3 to srm and when i used the t-code bbpgetvd i got a message that it has already been replicated but wheni am trying to create a Shopping Cart and assigning vendor to the cart it is giving me a message that no supplier is assign and no possible source of suply found in the system?PLS answer my question its urgent.

Hi Pooja,
I understand that you have moved your partner information from R/3 to SRM. In SRM, all the Partner(vendor) information is stored in BUT000 master table. The type of partner = 02.
Go to transaction BP in SRM and check for the partner data. If found, go to master table BUT000 and check there. If you dont find your data overthere track the msg flow.
Else you should be able to create the cart.
Regards,
Karthik Babu
Edited by: karthik babu pulluru on Jan 13, 2012 7:38 AM

Replicating vendors from SRM to ECC

Hi All,
We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario.
We have a requirement where we want to replicate the vendors from SRM to ECC.
I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but are there any standard programs XI/PI interfaces that are available for replicating vendores from SRM to ECC?
Please share your thoughts....
Thanks in advance!

Hi Jack,
Unfortunately I don't have a config guide for it. Can you speak to your XI/PI consultant and just ask him to configure this scenario in XI/PI.
PS: Before this you should import all SRM related business content in your PI system.
Regards,
Nikhil

Replicating authorization roles via HR replication from ECC 6 to SRM 5.0

Hi,
I'm interested in knowing whether anyone has used the distribution model to copy roles (AG objects) between ECC 6 and SRM 5.0.
Someone said that it's possible so I would like to validate that statement as I don't know whether it is possible and practical.
If you have any knowledge or experience could you please share it?
Regards,
Jerry

Hello Yann,
I was told that it can be done but I don't know enough about the HR replication process to acknowledge or challenge, hence the question.
Are you implying that it's not possible or simply that it's not done?
I had an earlier post regarding assigning roles to positions in SRM Replicating authorization roles via HR replication from ECC 6 to SRM 5.0 that you replied to but never replied to my subsequent question. It can be done because one of my other clients is doing it. We're however unable to get it work at my current client's site. Do you have any experience with this subject?
Regards,
Jerry

Issue in product category replication from R/3 to SRM

Mehul G Shah: BACKGROUND:
We are in the process of replicating Material Group from R/3 to SRM
using transaction R3AR2 & R3AR4. Our Pre-Production server got
refreshed recently & this has caused all EBM data inclucing Logical
System & Destination being overwritten with EBP data.
We have maintained middleware paramaters, viz., CRMCONSUM, CRMRFCPAR,
CRMPAROLTP & also TBE11.
We have also maintained sites in CRM Middleware Monitoring Cockpit
using SMWP.
We have also tried after deleting entries in tables CRMPRLS (R/3) &
CRMMLSGUID (EBM) as suggested by SAP note 765018
We have followed steps mentioned in link /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
(But we are not clear about site attributes which needs to maintain as per the CRM Middleware Monitoring Cockpit.)
ISSUE:
Material Group gets replicated to Product Category in SRM. However, the
Product Category gets replicated with Logical System which is not
maintained in EBM

Hi ,
Thanks 4 ur replay,i have maintained Site attributes,please give me detail of site attributes like which attributes should i maintain ?please give me descriptive answer.

MM - SUS: transfer text of the purchase order from R/3 to SRM

Dear gurus,
I 'm implementing a scenario of plan driven procurement with R/3, i have a release of SRM SERVER 5.5,R/3 is connected to sus via XI.
ICan you help me to trasfer text from R/3 purchase order item to Sus purchase order item.?
Best regards.
Alessio Pernasetti

Hi
Which SRM version are you using ?
Please specify what is your detailed requirement.
Please try these links ->
Note 761150 MM-SUS: sending texts from SUS (ORDRSP) to R/3-MM
Note 995388 MM-SUS: sending texts from SUS (ORDRSP) to R/3-MM
Note 868192 Consulting solution: SUS-MM (SUS-MMSRV) service procurement
Note 703876 Release note SRM Server 5.0 SP00
Other links ->
Replicating the material master purchase order test from R/3 to SRM
Purchase Order Response in SRM from R/3 through XI
Re: Retrieving data from R/3 into SRM
SRM Purchase Order Response
Re: View "Purchase Order Text" in Material Master
Mapping fields in SRM with R/3
Regards
- Atul

Material Replication R/3 to SRM 3.0 - material not in COMMPR01

Hi,
We regularly repicate Product category from R/3 to EBP without any problem. For a requirement, I created a material in R/3, and now want to replicate it to EBP 4.0 (SRM 3.0)
I executed the following objects In R3AS in the same order as listed below,
1. DNL_CUST_BASIS3
2. DNL_CUST_PROD0
3. DNL_CUST_PROD1
4. Material
All the process were succesful. SMQ1/SMQ2 were clean, R3AM1 had green signal for all.
But when I check in COMMPR01 or in table COMM_PRODUCT I donet see any material.
I am not sure where I am going wrong. Please suggest.
My requirement is to bring the Material from R/3 to EBP for procurement so that I need to create an equipment in R/3 (automatically) at Goods receipt, refering to this material number for tracking purpose.
Any solutions for this would be welcome.
Regards,
MRao

Hello Mahesh,
MARA-MATKL is actually the material group. The material number would be MARA-MATNR.
As an example our filter settings for materials are:
MARA     MATKL     EQ Equality (= Low)     101780                                                  I Inclusive defined set/array
MARA     MTART     EQ Equality (= Low)     ZAWA                                                  I Inclusive defined set/array
MARA     MTART     EQ Equality (= Low)     ZLAG                                                  I Inclusive defined set/array
Also, I don't know if it'll make a difference. Could you check transaction R3AC4 and see if 'material' is active/inactive.
Good luck.
Franz

Replicating material from R/3 to SRM problem

Similar Messages

Maybe you are looking for