Replicating storage locations from SAP SRM

Dear Experts,
How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
Thanks and regards,
Ranjan

HI Ranjan,
Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
thanks,
Rahul Mandale

Similar Messages

Schedule lines are creating problem in PO-storage location in SAP

Hello Everyone,
We are using SRM 5.0 ECS.
We create the PO in SRM and send it to R/3 backbend system. When we maintain the schedule line in PO(SRM side),the backbend system is not maintaining the correct storage location from purchase req. And when we do not maintain the schedule line in PO(SRM side), the backbend system maintain the correct storage location from purchase req.
So here what can be the reason for this problem?
Regards,
Khushbu.

Please I need help on this.

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Exclusion of storage location from ATP

Hi Gurus,
Can anybody pls tell me how should i exclude a storage location from ATP check.
Regards
Kaisar

Hello,
The below link may be useful..
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f4/7d326d44af11d182b40000e829fbfe/content.htm
Regards,
Siva

Can we send .csv file from sap srm system to sap pi?

Hi Experts,
we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
How can we send .csv file from sap srm to sap pi?
Regards,
Anjan

Anjan
As you know SAP SRM and SAP PI are different boxes.
*_Option 1:_*
we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
Option 2:
Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine. You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using sender file communication channel (FTP Mode) providing user credentials.
Hope it clears now.
Regards
Raj

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

I want to exclude a storage location from MRP

I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
Also repair storage location stock should not be calculated against 'stocks' term in MD04.
How to do this ? Pls share.

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please let me know if you have any questions.
Regards,
Senthilkumar

Deactivation of storage locations from MRP run

Hi gurus,
How can i deactivate a particular storage location from MRP in a particular plant.
Regards
Kaisar

Hello,
There are 2 ways of doing that.
1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
This storage location will be excluded from MRP.
2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
Some concerns:
Your Materials are extended to the St.location say xxxx.
Now if you want this storage location to be excluded from the MRP.
By simply seeting the Customization settings will not work.
You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
The Materials created after this customization setting will adopt this settings automatically.
Hope this helps..
Regards,
Siva

Need to exclude storage location from MRP.

Hi Gurus,
Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
Now, the problem is every time i need to go to the material master of every material i have to excude from MRP, which is very time consuming..!
Please advise me is there any option in point of view of Storage Location, just simply define the storage location to be excluded from MRP run.
Thanks in advance.
Naveen.

Dear,
Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
Also check this link for more details,
Exclude purchase order on storage location from MRP
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 25, 2009 12:22 PM

Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Default Storage location from PO to GR

Dear All,
How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
regards,
qsm sap

Hi,
First Storage location should be extended in Material master.
Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
One other option is In IMG settings if you set the checkbox set storage location automatically.
Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
No matter if you extended in material master/PR/PO
rgds
Chidanand

Table for storage location from MIGO in the index "where"

Hi,
I would like to know the in which table is saved the storage location.
I would like to take the storage location from MIGO in the tab index Where.
Thanks.
Dede

Hi Glen,
If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
Cheers.

Exclude purchase order on storage location from MRP

Hi Everyone,
We have excluded storage location 1200 from MRP.
The result shows only stock on 1200 excluded from MRP, PO on storage location 1200 (storage location 1200 in PO) still considered in MRP.
Is there any way to exclude PO on 1200 i MRP also?
Best Regards,
Bin

Dear,
Go to MRP 4 view of the material master .
In the field SLoc MRP indicator field "1".
If it is for a material than in the material master level it can be done. If you are looking for all materials in that storage location, than it is better to define this in SPRO->Production->MRP-->Planning-->Define Storage Location per MRP plant. Here for that storage location in that plant you need to define "2" - Storage location stock planned seperately or "1" - Exclude Storage location from MRP.
Also u can use t.code MMSC.
Select Material & Plant and Assign MRP =1 for the Sloc to be excluded
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 14, 2008 9:32 AM

Restrict certain Storage location from getting displayed in CO06 !!

Dear all -
We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
in CO06.
I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
Thanks
Arun
Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

Storage Locations from Planning

Hi Gurus,
I want to avoid some storage locations from Planning, if any dependent requirements come specif for those storage locations I want no procrurement proposals to be made. how to do that.
Please suggest.
Srini

Dear Srini
1) In MMSC transaction there is a setting -MRP select 1 storage location stock excluded from MRP
2) In MRP View 2 or in Bom item Maintain the Production storage location fied with is specific storage location.Your sceanrio will work
pl reward points if useful
Prabakaran K

Replicating storage locations from SAP SRM

Similar Messages

Maybe you are looking for