Replicating the effects at the end of the tv show 24

I am certainly asking a lot here; but here it goes. Where should I start if I want to integrate 9 shots of footage into boxes on the screen. The boxes change size to partially fill the screen as emphasis is placed on certain portions of the footage. This is similar to the effect seen at the end of most episodes of the TV series 24. i.e. One box has Jack shooting and yelling, one has the president at his desk looking at a report, one has Kim Bauer eating dinner, etc.
Can I do this in Final Cut (or media 100 for that matter)?
The editing suite that I have available has Final Cut, Media 100, Motion, and After Effects; this is for a PSA spot and we're thankfully able to use university equipment.

stack up the clips one on top of each other, double click the clip on v1 then, in the viewer, click the 'tablet' on the right, select 'image and wireframe'. Go to the viewer and select the 'motion' tab and then change the scale values to change the size of the clip in the canvas. You can then drag the clip to any position in the canvas.
Repeat for each of the other stacked clips.
Scale and motion are both keyframeable, just experiment.
Dave

Similar Messages

Replicating the data source

Hi,
I have an attribute data source and when I have replicated the data source again from the source system, the type has changed from attribute to hierarchy.
Can you please tell me how can this happen and what needs to be done to revert it back to attribute data source.
Regards,
Harikiran Gunnala

Hi Hari,
it cannot change automatically like hierarchy........See for....another...data source,which data source ended with _ATTR......................
Hope it helps
Regards
chandra sekhar

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Replicating the app functionality from OIM 10g to OIM 11gR2

Hi,
I have a resource object with an object form and a process form and approval, provisioning configured in OIM 10g design console. Provisioning is manual provisioning assigned to a particular group based on a task assignment adapter. For replicating the same in OIM 11gR2 i followed the following steps.
1. Created a Resource object in Design console.
2. Created a dummy IT Resource ( Since while creating app instance it is having IT Resource as Mandatory field. * Is there any way to skip this as i do not have any IT resource in my original app as it is going for manual provisioning?)*
3. Created a process form in Design Console with the same fields as present in my 10g app process form.
4. Now i need to Create an app instance and select the created resource object and IT resoource. Also i need to create a form associated with the app instance in which i will add the fields as present in the object form in my 10g app. ( Here i am not understanding how data will flow from object form to process form since there is no data flow mapping here)
5. Other steps like creating the SOA composite with human tasks and deploying it and after that creating approval policies is pretty much clear.
Please clarify whether the steps are correct and also the queries which i have posted in between. Thanks in advance.
Regards,
Durgaprasad
Edited by: Durgaprasad on Jan 17, 2013 3:38 AM

Thanks Gyanprakash. Wll disconnected resource trigger our custom approval process if we select the resource name properly in scope in operational level approval policy. Have you tried a disconnected resource with your custom approval process. Because i read the following lines in admin guide
Oracle Identity Manager supports provisioning of disconnected resources by using the SOA worklist for manual provisioning of disconnected resources. After the role-based provisioning decision or SOA request approval is complete and the corresponding application instance is determined to be a disconnected application instance, a new SOA workflow is started. This new SOA workflow is assigned to the manual provisioning administrator.
So i thought disconnected app instance will have its own approval process configured during the creation and it will route accordingly. So just wanted to clarify how to make disconnected app instance to trigger our approval. will approval policay take care of it as i am going to select the name of the disconnected app in the scope field.

TS3694 i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

Error -1 generally indicates a hardware failure.Your phone's broken. Buy a new phone, replace the phone through Apple or an authorised service provider, or find a 3rd party repair shop to attempt to fix it.

Error in replicating the SAP BI 4.x Environment

Hi All,
I am following the below blog to replicate content of prod in Sandbox.
Replicating the SAP BI 4.x Environment
However while Creating a new SIA node i am encountering errors as the new SIA node getting added with out any default servers.
I was able to achieve the above in a different environment where there were no clusters.But in the current scenario i have my prod which has a cluster environment with windows AD auth where as sandbox is installed in a single system with enterprise Auth.I have attached the error logs which i got while adding the new node with default servers in CCM.
ENV:
SAP BI 4.0 sp5
Sql server 2008 R2
Windows
Thanks in advance for all your help and guidance
Regards
Kishore.
Replicating the SAP BI 4.x Environment

Hi Asma/Satish,
I have added a new node with cms and SIA port 7400 and 7410.But same issue occured.
While trying to add a node to use "Start a Temporary New CMS" and select "recreate node" the error says port 6400 already in Use.
This is how the Manage server looks after i added a node with node with cms and SIA port as 7400 and 7410
from the log files what i understood is that it is not able to add the default services and writes the below error
OutOfBoxAdaptiveProcessingServer.
FAILED: could not find server with cuid AfRmWmX2jhJOnbtEuIXTmF4. Query returned 0 infoobject(s)
and
utOfBoxCentralManagementServer.
FAILED: could not find server with cuid AS3zRDnsuv9KonM9nLcyROg. Query returned 0 infoobject(s).
Generating DFO files for OutOfBoxOutputFileRepositoryServer...
Regards
Kishore

Replicating the PersistenceMgrSO

In our Forte application, so far, we had single instance of PersitenceMgrSO.
Now we have replicated (replication count is 3) it for load balancing.
W.r.t. the replication, I have a question here.
When we make a call to PersitenceMgrSO, it will go to any one of these
PersitenceMgrSO's (selected by the router). And from within that instance of
PersitenceMgrSO, if we make another call to PersitenceMgrSO, we are not sure
whether the call will get processed in the same service object or will go to
the router for another instance of the same PersitenceMgrSO. In our
application, almost all entity handlers make the call to PersitenceMgrSO for
business rules and other data validation.
Please clarify as to what will happen in this situation, as it very much
crucial for our Beta release.
(also, I noticed that two active partitions of the router for this load
balanced partition, are running, though we have not replicated it. Isn't it
strange? Can we replicate router partitions , and if can, how these router
partitions will coordinate among themselves in directing the messages to SO's
thanks
Thiru.
Get free email and a permanent address at http://www.netaddress.com/?N=1

We never call an SO from within an SO. Instead we do the following :
MySO is mapped to MySOclass.
MySOclass is a facade which has an attribute for every Policy Manager
related to this SO.
Each Policy manager is instanciated in MySOclass.
Each Policy manager has an attribute called Parent.
Parent is defined by MySOclass to be self.
If two Policy managers need to work together we invoke methods via the
parent attribute :
Example
I have a partition for Enrolments.
It has three Policy Managers within it
a Students Policy Manager (with a Add, Delete, Get methods)
a Courses Policy Manager (with a Add, Delete, Get methods).
an Enrolments Policy Manager (with a Add, Delete, Get methods).
To enable this partition we have defined :
EnrolmentsSO (environment visible, message duration) with the EnrolmentsMgr
class as its related class.
The EnrolmentsMgr class has the following methods and attributes :
Methods :
AddStudent
AddCourse
AddEnrolment
GetStudent
GetCourse
GetEnrolment
DeleteStudent
DeleteCourse
DeleteEnrolment
All of these methods do a one line return statement, simply passing the
method invocation to
the appropriate Policy Manager. For example AddStudent would say
Return theStudentPM.AddStudent(pInStudentParams : pInStudentParams)
: pOutStudentParams
In the Init method for the EnrolmentsMgr we instanciate the following
attributes :
theStudentPM (which is typed to the StudentPM class)
theCoursePM (which is typed to the CoursePM class)
theEnrolmentsPM (which is typed to the EnrolmentsPM class)
Also in the Init method we set an attribute (called parent) on each
PM to the value of Self.
Then when one PM needs to invoke a method on another PM we simply do :
For example in the theEnrolmentPM.GetEnrolment method we need to get
Students and Courses
thus we code :
Parent.GetStudent(pInStudentParams = pInStudentParams) : pOutStudentParams
Parent.GetCourse((pInCourseParams = pOutStudentParams.CourseStuff) :
pOutCourseParams
Build Enrol details based on student / course stuff.
Return EnrolmentParams.
Hope this makes sense.
Regards,
Chris Will, Dept. of Educ. Training, ITB, Sydney, Australia
-----Original Message-----
From: Peter Sham [mailto:[email protected]]
Sent: Friday, 8 October 1999 9:35
To: [email protected]; [email protected]
Subject: Re: (forte-users) Replicating the PersistenceMgrSO
Hi,
Whenever you make a call to your load-balanced SO, it
would go through the router. That is what I
understand. No matter you make the call from inside
or outside the SO.
Secondly, you can turn on the "fail-over" option of a
router but not load-balanced it. On these routers,
you can check their instruments to see which one is
really running.
Hope this help.
Regards,
Peter Sham.
--- [email protected] wrote:
In our Forte application, so far, we had single
instance of PersitenceMgrSO.
Now we have replicated (replication count is 3) it
for load balancing.
W.r.t. the replication, I have a question here.
When we make a call to PersitenceMgrSO, it will go
to any one of these
PersitenceMgrSO's (selected by the router). And from
within that instance of
PersitenceMgrSO, if we make another call to
PersitenceMgrSO, we are not sure
whether the call will get processed in the same
service object or will go to
the router for another instance of the same
PersitenceMgrSO. In our
application, almost all entity handlers make the
call to PersitenceMgrSO for
business rules and other data validation.
Please clarify as to what will happen in this
situation, as it very much
crucial for our Beta release.
(also, I noticed that two active partitions of the
router for this load
balanced partition, are running, though we have not
replicated it. Isn't it
strange? Can we replicate router partitions , and if
can, how these router
partitions will coordinate among themselves in
directing the messages to SO's
thanks
Thiru.
Get free email and a permanent address at
http://www.netaddress.com/?N=1
For the archives, go to:
http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
=====
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe,
send in a new
email the word: 'Unsubscribe' to: [email protected]

Addint a child domain process hangs in Replicating the schema directory partition

Hello everyone,
for practice proposes and exam preparations I have my own virtual private network setup on an PowerEdge R905 Machine (which is a beast) I have two networks and windows server 2008R2 on a DMZ zone setup as router to rout traffic between two of my networks.
My two networks are 192.168.10.0 - and 192.168.20.0. the 10 network has its own active directory setup, now on my 20 network I am trying to deploy a child domain. during the process everything is going just fine BUT the process of promoting the domain gets
stuck on Replicating The Schema Directory Partition. Can anyone tell me what the issue might be ? I tried everything that I could think of such as:
made sure the 20 network server is pointed to the DNS on the 10th server.
you can ping the IP address and the FQDN of 10 network from the 20 network.
I made sure all firewalls are disabled on both networks
on my 10 network I have created sites and assigned the right subnets for each site
so please any hint and explanation is greatly appreciated

If firewalls are disabled between the 2 subnets then you are sure that all of the below ports are opened:
Client Port(s)
Server Port
Service
49152 -65535/UDP
123/UDP
W32Time
49152 -65535/TCP
135/TCP
RPC Endpoint Mapper
49152 -65535/TCP
464/TCP/UDP
Kerberos password change
49152 -65535/TCP
49152-65535/TCP
RPC for LSA, SAM, Netlogon (*)
49152 -65535/TCP/UDP
389/TCP/UDP
LDAP
49152 -65535/TCP
636/TCP
LDAP SSL
49152 -65535/TCP
3268/TCP
LDAP GC
49152 -65535/TCP
3269/TCP
LDAP GC SSL
53, 49152 -65535/TCP/UDP
53/TCP/UDP
DNS
49152 -65535/TCP
49152 -65535/TCP
FRS RPC (*)
49152 -65535/TCP/UDP
88/TCP/UDP
Kerberos
49152 -65535/TCP/UDP
445/TCP
SMB
49152 -65535/TCP
49152-65535/TCP
DFSR RPC (*)
Then make sure that the other subnet is across route not across NAT to avoid a lot of additional configurations.
Regards,
Housam Smadi

Replicating the datasource

Hello SAP Gurus,
I have a question on Replication of Datasources.
If I create a new datasource in R/3 Development system and replciate the datasource in BW
and create an Infosource and collect the objects of BW (infosource Communication structure ,Transfer structure, Cube) and R/3 (Data source).
and I imported R/3 datasource to Next environment (QA) ....and without replicating the datasource in BW.
I want to transport the BW objects without replicating the datasource.
Is it Possible?
Thanks.

Super Man,
what ever it may be the verrsion you need to replicate the DS. when ever you make any chnages(any technical changes to the DS i.e. adding new fields, changing the technical attributes of the field etc) or create new DS or install BC DS, you need to replicate in BW. When ever you replicate the DS, it copy logical view of DS in SAP BW(Means Meta data will Transfered). without replicating it's not pissible setup data flow.
All the best.
Regards,
Nagesh Ganisetti.

Updating my iphone just failed, right at the end. Now I can't get the picture showing me to plug in my iphone to itunes to disappear.

updating my iphone just failed, right at the end. Now I can't get the picture showing me to plug in my iphone to itunes to disappear. Please help, as I can't use my phone, and it will not clear.

read
http://support.apple.com/kb/ht1808

I try to update the software of an Iphone or Ipad with the Itunes of the MacBook Pro. It downloads the software but at the end always the comment shows up that the download failed and i should try again. Any ideas, I already updated the iTunes software.

I try to update the software of an Iphone or Ipad with the Itunes of the MacBook Pro. It downloads the software but at the end always the comment shows up that the download failed and i should try again. Any ideas, I already updated the iTunes software.

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

My "iPod Classic (60GB) Click Wheel" is not being recognised in iTunes although the iPod shows up in 'my computer'.

My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'. The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times. I've carried out an error check in the iPod properties. I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

GL: FSG: The report shows zero, though the account has posted balance

Hi,
In my FSG report in Release 12i (12.0.4) I have assigned an account to a row (in row set), and that account has posted balance. However, on running the report the amount shows zero, and the log file shows the following message,
"PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found".
Can anyone please help me with this? I have raised a service request but it has taken too much time already. Thanks
Best Regards,
Sohail

Hi,
Please see the following documents.
Note: 876634.1 - R12 FSG: PERF0005: ORACLE Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found
Note: 829314.1 - R12 All Fsg Reports End in Error PERF0005 Detected In Get_def_ldgs ORA-01403 No Data
Note: 781339.1 - R12: FSG ENDS WITH SIGNAL 11 AND PERF0005 IN GET_DEF_LDGS DUE TO ORA-01403
Regards,
Hussein

How can I change the order of photos in iPhoto so I can create the slide show I want?

How to change the order of photos in iPhoto on my iPad, so I can create the slide show I want.

Here's what I did to generate a slide show with Ken Burns effect on the iPad...with the exact same slide order I created on the iMac. I have iOS 5.5 and iPhoto App on New iPad, and iPhoto 11 on iMac.
In iPhoto for the Mac, create a new Album and give it the name of your Slide Show. Drag or import the photos you want into the album. Rearrange the order of the album photos as desired. Do this by selecting Manual Sort under View/Sort Photos or simply start dragging thumbnails to the places you want them (the sort method will automatically change to Manual).
When you have the order you want, shut down iPhoto on the Mac to make sure iPhoto's database gets updated with the new photos and their order.
Restart iPhoto and go to File/Export on the top menu. Select File Export at the top left of the Export window. Set JPEG quality to Max, Size to Full Size, and File Name to Album Name and Number. Set Subfolder Format to None.
Click Export to bring up what looks like the Finder. Create an empty folder on your hard drive under Pictures and give it the name of your slide show. Click on the new folder and then click OK at the bottom right of the Finder-like window. The new folder will contain JPEG files with file names in the form, Album Name - 001.jpeg, Album Name - 002.jpeg, etc. There will also be an iPOD Photo Cache folder. Click at the top of the Name column to order files by file name. 001 will be your first slide, 002 your second, etc.
Now start up iTunes. You are going to force the Mac to sync these new photos with the iPad. Click on your iPad device in the list at the left. Now click on the Photo button at top right. Make sure the Sync Photos check box at top is checked, then select Choose Folder... from the list at right. In the Finder-like window that opens, select the folder where your slides are. Make sure that All Folders is checked, then select Open at the bottom right.
Now click Sync at bottom right. The slides will be copied to your iPad. Both the Photos app and the iPhoto app will properly handle the slide order, and the Ken Burns effect is available using the iPhoto app.
I ran across this problem in preparing a Ken Burns slide show for a wedding. Drove me nuts for a week why the order changes when syncing an iPhoto album from iMac to iPad. But this worked and gave me several options. I plan to use the digital AV adapter for iPad and show slides on a large screen TV using HDMI connection from iPad to TV. TV essentially acts as an external monitor for the iPad.
Hope this helps!

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

The Daily Show

Am trying to play the video available via Safari on "The Daily Show" Site but seem to be running into problems. The video frame will load but it is black. I have the latest Flash installed and Flash runs on other sites. Also loaded the basic Flip4Mac, am running 10.4.11 on a G5 with Quicktime 7.4.5.
Have also tried Camino & Firefox with the same result.
Any Thoughts muchly appreciated...

Well I get to answer my own question.
On the advise of an extremely Tech Savvy Friend I made a new account.
In the new account everything worked as its supposed to.
So I checked what was different in the Plug Ins and Prefs Folders.
Ended up copying over the Folder for Macromedia and trashing a plug in for
Daily Show Goodness in the Main AC.

Replicating the effects at the end of the tv show 24

Similar Messages

Maybe you are looking for