Replicating Z fields in an sales order to ECC from CRM

Hi
we are trying to replicate Z fields in a SO to ECC from CRM. We have followed the following steps for the same, these are given in one of the threads in SDN:
1. Append structure to VBAK and VBAP in R/3
2. Extend the structure BAPE_VBAK and BAPE_VBAP in CRM
3. Implement BADI 'SALESDOC_MBDOC_BAPI' and implement code in method
'CRM_DATAEXCH_AFTER_BAPI_FILL' to fill the the above structures and move them into CT_BAPIPAREX that is passed as changing parameter to this structure
But corresponding fields in backend ECC table are not getting updated.
Please help me in resolving this.
If you have any document detailing steps, please forward that to me on [email protected]
Thanx in advance.
Cheers
Hits

Hello Hitesh,
What you've done up to now is making sure that the data is passed to ECC. But ECC doesn't know what to do with this extra data you filled in the 'CRM_DATAEXCH_AFTER_BAPI_FILL'  CT_BAPIPAREX structure.
Look for a similar BADI in ECC (something with DATAEXCH), this BADI is called when data arrives in ECC. Here you will find your value in the CT_BAPIPAREX, fetch the data and write to the desired field in VBAP.
You just forget a step, that's all.
Hope this helps!
Regards,
Joost

Similar Messages

  • Custom fields replication in sales order from CRM to ECC

    Hi Experts,
    We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
    On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
    Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
    In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
    What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
    Regards,
    Manohar

    Hi Manohar
    You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
    Regards
    Gavin

  • Free Good Qty as non modifiable field in the Sales Order Level

    Dear Friends,
    I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
    How can i do this.. Please advice.
    Thank U,
    Uwanthi

    Hi
    This is a standard behaviour in the system
    kindly use the below program and user exitexit
    MV45AFZZ and use "Userexit_filed_modification"
    Regfards
    Damu

  • How to make all fields mandatory in sales order T- code VA01 initial screen

    Dear all,
    how to make all fields mandatory in sales order T- code VA01 initial screen itself
    The fields are
    Sales Organization
    Distribution Channel
    Division
    Sales Office
    Sales Group
    Regards,
    Amar Reddy

    Hi,
    You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
    [Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    Regards,
    Phani Prasad

  • How to make tax classification field mandatory in sales order ?

    Hi,
    while creating sales order, " how to make tax classification field mandatory ".
    Please tell me the procedure.
    In tcode OVA2. what are the entries for fields,table.
    Regards,
    sapsduser

    Dear ,
    Could you please share why you want to make tax Classification field mandatory in sales order.
    Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
    Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
    While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
    Tax is calculated based on the ship to party.
    Hope this will help you.....
    Regards,
    Manoranjan.

  • Add field 'asset' in sales order line item account assignment tab

    Hi,
    I would like to add the following field: 'asset' in sales order line item account assignment tab.
    I can enter order, or wbs, but not Asset.
    How can I make this field visable?
    Anybody?
    thanks,
    klundert
    Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Additional field in the sales order screen

    I need some additional field in the sales order screen. There is
      also no screen exit available for VA01. Can I use this
      additional data B tab in header details by creating additional
      field in it. Please tell me how to use this tab or how to get
      different field in the sales order (header or item level).

    Hi,
       Yes. You can use this screen. For this either can modify the table VBAP with additional fields and put them on this screen.
      You have to code your logic to save these values in the include MV45AFZZ. The subscreens you have to use for this are 4462 or 8459.
    refer Screen exits - Urgent.
    with regards,
    Vamsi

  • Query Alert for a change in value of the Quantity field of the sales order

    Hi Experts,
    A query alert has been set up to alert the warehouse employee when a new sales order is created by a sales employee. Our client wants the warehouse employee alerted when the sales employee edits the quantity field of an already added sales order.
    Kindly assist in designing a query to notify of this change in the Quantity field of the sales order.
    David

    Try this one:
    SELECT T0.DocNum, T0.CardCode, T1.ItemCode, T3.Quantity 'Old Qty', T0.Quantity 'New Qty', MAX(T2.LogInstanc) 'Times Changed'
    FROM dbo.ORDR T0
    INNER JOIN dbo.RDR1 T1 ON T1.DocEntry = T0.DocEntry
    INNER JOIN dbo.ADOC T2 ON T2.DocNum = T0.DocNum AND T2.ObjType = '17'
    INNER JOIN dbo.ADO1 T3 ON T3.DocEntry = T2.DocEntry AND T3.ItemCode = T1.ItemCode
    WHERE T0.DocStatus = 'O' and T0.DocType = 'I' AND T1.Quantity != T3.Quantity
    GROUP BY T0.DocNum, T0.CardCode, T1.ItemCode, T1.Quantity, T3.quantity

  • Sales district field in Quotation/Sales order

    Hi Gurus,
                  on which screen i can see the "Sales district" field in Quotation/Sales order/Inquiry?
    Thank you
    ANil

    Hi,
    In Inquiry :
    Menu Bar : Go To: Header : Sales : Below u can see under Pricing and statistics
    Same in Quotation and Sales Order.
    Thanks,
    Raja

  • Need Profit centre field as mandatory field in the sales order

    Dear All,
    Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
    My requirement is if profit center data is not maintained/available in the sales order system should give the error message
    For this I need Profit center field as mandatory field in the sales order(VA01).
    Can you please give possibilities ASAP.
    Give the SHD0 maintenance step by step.
    Regards,
    Murali.

    Hi Murali
    I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error  (GL account error) because of that
    Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
    But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
    Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
    As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give   Profit centre field and process it (if only a few orders are there)
    But if the already created orders are many then from the FI Area  you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
    Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
    Regards
    Raja

  • To Populate the profit center field in the sales order by user Exit.

    Hi All,
    Please let me know :
    How the user exit is used to populate the Profit center field in the Sales order?
    Please gurus answer  as quickly as possible as I require this urgently.

    If you want to overwrite the profit center in sale order (determined from the materail master) with a different profit center based some other criterion you can use profit center substitution rules. Check the wiki:
    [Profit Center Substitution in Sales Orders|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/profitCenterSubstitutioninSales+Orders]
    Regards,
    GSL.

  • Editing the conversion field in the sales order

    Can any one tell me how to use the user exit USEREXIT_FIELD_MODIFICATION in order to make the conversion field in the sales order enabled so that i can edit it in the sales order
    Regards,
    SD Consultant

    Hi Serry,
    As per my understanding you are talking about currency conversation in sales order which is in grayed out at sale header level,the values are coming from VBKD - KURSK so through the user exit ask your abaper make that filed in editable mode.
    Regars
    Ram

  • Adding Custom Fields to the Sales Order Screens - VA01, VA02 & VA03

    Hi,
    I have a requirement to add custom fields in the Sales Order Standard Screen. Could anyone please tell me is there any screen exit available to add a tab screen or is there any possibility without modifying the standard code.
    Please let me know with the details.
    Thanks & Regards,
    Goutham.

    Hi Narendran,
    Thanks for prompt reply, it was very useful.
    Could you please let me know the procedure you have followed in coming to this conclusion of what screens to be used.
    I understand that the program is SAPMV45A.
    Thanks & Regards,
    Goutham.

  • User based block the pricing field in the sale order

    HI FRIEND
    We have requirement user based block the pricing field in the sale order
    pls suggest me the configuration steps
    with regards
    dinesh

    hi friend
    when create a sale orde,r price and exchange rate is triigger from the master record.
    head department want not require to End user to change the price in the sale order .
    so head department only have authorisation to change price.
    selected user is not allow the change the price.
    so i need the configuration
    with regards
    dinesh

  • Minimum mandatry fields for Creating Sales Order

    Hi All,
    I am going to create sales order using <b>BAPI_SALESORDER_CREATEFROMDAT2</b> in the web dynpro for java,
    I want to use minimum fields,  so, what are the <b>minimum</b> fields for creating sales order ?.
    if u have any documents or links realted to this please send me.
    please help me out.
    Thanks & regards,
    Iqbal Ahmad

    chk it
    EXPORTING
    SALESDOCUMENTIN =
    ORDER_HEADER_IN = l_order_header
    ORDER_HEADER_INX =
    SENDER =
    BINARY_RELATIONSHIPTYPE =
    INT_NUMBER_ASSIGNMENT =
    BEHAVE_WHEN_ERROR =
    LOGIC_SWITCH =
    TESTRUN =
    CONVERT = ' '
    IMPORTING
    SALESDOCUMENT = l_salesdocument
    TABLES
    RETURN = it_return
    ORDER_ITEMS_IN = it_order_items
    ORDER_ITEMS_INX =
    ORDER_PARTNERS = it_order_partners
    ORDER_SCHEDULES_IN = it_order_schdl
    ORDER_SCHEDULES_INX =
    ORDER_CONDITIONS_IN = it_order_conditions
    ORDER_CONDITIONS_INX =
    ORDER_CFGS_REF =
    ORDER_CFGS_INST =
    ORDER_CFGS_PART_OF =
    ORDER_CFGS_VALUE =
    ORDER_CFGS_BLOB =
    ORDER_CFGS_VK =
    ORDER_CFGS_REFINST =
    ORDER_CCARD =
    ORDER_TEXT =
    ORDER_KEYS =
    EXTENSIONIN =
    PARTNERADDRESSES
    How to create sales order using bapi( test purpose)
    Create Sales Order using BAPI
    creating sales order using bapi

Maybe you are looking for