Replication agreement configure via DSCC

Hi
I have problem on config replication agreement. I want to make replication between 2 masters which installed on different physical machines. But they cannot find out with each ohter Or how to add remote servers on server list, I even tried to do register server but failed.
Thank you.

Can you check if cacao is running?
/opt/dsee/dsee6/cacao_2/usr/sbin/cacaoadm status
If not running, start it:
/opt/dsee/dsee6/cacao_2/usr/sbin/cacaoadm start
If this did not help, please explain: "But they cannot find out with each ohter Or how to add remote servers on server list, I even tried to do register server but failed."
What steps did do follow to register a server andwhat error did you see? Post error and access log snippets

Similar Messages

DSCC- DirectoryServers- Servers displaying replication agreements?

Hello Folks -
When working through DS 6.x I noticed that sometimes the creation of a replication agreement will result in that agreement being displayed under the Servers tab within the DSCC. It will not happen for all agreements. When logging into DSCC - there are numerous searches which take place against the all registered instances - I assume to get some data to display. The searches for the replication agreements take place on all hosts - so why only some are displayed is odd. Any help would be appriciated.
Thanks
Randy
Example:
All JES Installs
Host 1: DS 6.3
Host 2: DS 6.0
ADS exists on Host 1 - both instances registered.
SSL agreement from Host1 -> Host2 = not displayed
SSL agreement from Host2 -> Host1 = dispalyed in DSCC Servers tab
Example of display:
HOST1:HOST1_SSL_PORT -secure port- (server not registered) and no instance path is displayed

Ok - this has been resolved. The issue was - when HOST1 was registered locally to the ADS it was with the command 'dsccreg add-server $instance_path'. The name of the host was then taken from the local machine (from /etc/nodename?) and was not the FQDN. Then the replication agreement was created from HOST2 -> HOST1 and the FQDN was used. The DSCC was not able to match the host names and considered the replication agreement a new host which was not registered. The resolution was to either create the replication agreement with the same value which was stored during registration - or better yet - register the local host again with the FQDN.

DSEE 6.2: port change and replication agreement update

I evaluate DSEE 6.2. I have created three ds instances in one host, two master and one slave. I changed the LDAP port number of my slave instance from 391 to 392 with DSCC. DSCC started to update configurations but stopped at 10 %:
Updating LDAP configuration of Directory Server
Updating Replication Agreements
10% Complete
Updating Directory Server ldap:391 LDAP configuration . . . . . Done.
Updating registration information . . . . . Done.
Updating Replication Configuration of suffix c=fi on server ldap:390:
Modifying Replication Agreement . . .
There are replication agreements between masters and both masters feed the slave.
BR,
-jukka-

Looks like you have a certificate problem:
"##[19/Dec/2007:09:27:17 -0700] - ERROR<4753> - SSL - conn=-1 op=-1 msgId=-1 - Security Initialization: Can't find certificate (ca-cert) for family cn=rsa,cn=encryption,cn=config (error -8174 - security library: bad database.)"
and until it is resolved, you wont be able to do much while in SSL mode.
Is your certificate expired? If it is, can you create a new, self-signed cert and try to run on that just to make sure it's not something else with server setup?

Scheduling agreement configuration??

hii
Can anybody explain me on below things
1.Scheduling agreements configuration steps..??
Configuration steps for below process:
Without release documentation (in the standard system, document type LP)..??
With release documentation (in the standard system, document type LPA)..???
Thnaks
SAP-MM

Hi,
First Define Time Dependent or Not Depenedent via
In the case of scheduling agreements and quotations, the document type determines whether time-dependent or time-independent conditions can be created. You can set the Time-Dependent Conditions indicator in Customizing for the document type to enable time-dependent conditions to be maintained in scheduling agreements and quotations.
Define time-dependency in scheduling agreements and quotations:
SAP Customizing Implementation Guideu2192Materials Managementu2192Purchasing u2192 RFQ/Quotation or Scheduling Agreement u2192 Define Document Types
and document type is
Define document types for scheduling agreement:
SAP Customizing Implementation Guideu2192Materials Managementu2192Purchasing u2192 Scheduling Agreement u2192 Define Document Types
For release u can create Release profile
Create release creation profile:
SAP Customizing Implementation Guideu2192Materials Managementu2192Purchasing u2192 Scheduling Agreement u2192 Maint. Rel. Creation Profile for Sched. Agmt w. Rel. Docu.
You can use release creation profiles to define the criteria for the creation of SA releases (you can influence the quantities and delivery dates/times to be transmitted to the vendor, for example).
Whether or not you can generate both forecast and JIT delivery schedules against a scheduling agreement with release documentation is determined by the JIT delivery schedule indicator in the material master record. In order for you to be
able to work with JIT schedules, the JIT delivery schedule indicator must be set in the material master record (Purchasing or MRP 2 view) and in the additional data for the scheduling agreement item. No JIT delivery schedules can be created unless this indicator has been set.
Hope Help U !
Regards,
Pardeep Malik

Automatic replication of Configuration from R/3 (ECC) to CRM 2007

Hi all,
We would like to set up an automatic replication of configuration maintained in R/3, e.g. Customer group 1, Payment terms, Incoterms, etc.. in order to secure consistency between R/3 and CRM as well as reduce work load.
As I understand, Customer data (customer_main) is supported by SAP but how about Configuration entries?
Is it possible?
Is it standard?
What is the way forward?
Your input is highly appreciated.
Thanks,
//Anders

Anders,
Take a look here for a start:
http://help.sap.com/saphelp_crm60/helpdata/en/00/cbe527805d23439ff8abd3813ec8fc/frameset.htm
Take care,
Stephen

No sender agreement configured in the XI Integration Directory

Hi,
I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
Thanks & Regards
Sruj

Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
Once again thanks a lot for everyone.
Thanks & Regards,
Sruj
Message was edited by: Srujan Gogineni

Problem with replication agreement

Hi All,
I am trying to setup a replication agreement within the version 5.1 console. I am using a multi-master model. I have run into a snag in that section where I need to enter the Consumer and the Connection->Simple Authentication. For some reason after I enter in the proper information the next button is still 'greyed' out.
Is this an indication that something is not right?
Thank you for any help/information.

Please ignore this post. I was able to sort my way through this porblem only to find another involving permissions.

Regarding replication server configuration

Good Morning...
In my current project,I have 3 databases like A,B and C.now i need to create materialized views on B & C database using dblink(created on A database), then i need to refresh around 70 tables for every 1 hour. so in this regard i need information about replication server configuration & DBLINK & MVIEW's ...

You must have clicked on the wrong link. This is the SQL and PL/SQL forum.

How to Invoke Oracle Configurator via URL Outside the APPS Firewall

Hi Gurus,
We would like to invoke Oracle Configurator via URL same as Oracle iStore. Please let me know the process/steps to meet the requirement.
Thanks in Advance,
Venky.

There is no restriction that Oracle Configurator may only be executed from within an Oracle hosting application. Configurator may be invoked from any application that has the ability to call Configurator's UI servlet. As an example, Astec (now part of Emerson Network Power) has had a Configurator application they call their "Power Wizard" on their public website for nearly eight years (http://www.powerconversion.com/powerwizard/).
Venky, I would recommend you search My Oracle Support for articles containing 'configurator firewall' or 'configurator ssl', and then filter the results to just EBS articles. If what you find there is not helpful, opening a Support Request to get information more tailored to your particular scenario may be advisable.
Eogan

SASL Replication Agreement Authentication

Is it possible to use SASL mechanisms for replication agreement authentication in DS5.2P4? (GSSAPI specifically). If not, are there plans to include this functionality in 5.2P5, or DS6, or some other future version?

It is currently not possible and it will not be in 5.2p5 nor 6.0.
There are many things in the pipe for future versions, and certainly SASL authn for the Replication session is one one them. I suggest that you contact your prefered Sun representative and try to have the priority raised
Ludovic

No Sender Agreement Configured in Dual Stack( PI 7.31)

Hi All,
I am configuring a simple file to file scenario.
Initially i Have created the scenario without ICO and It worked fine.Later I changed this ( ie, I have deleted sender agreement,Interface determination etc)
and used ICO to configure.
But I am getting the below error.
If the configuration is based on ICO,I don't think sender agreement is required.Please help.
Regards,
Tibin Joseph

Hi Tibin,
Please, if your issue is solved close the thread according this How to close a discussion and why
In this way further SCN members can figure out how to resolve their problems easier.
Regards.

Importing configurations via Order Import in R12

Hi All,
We need some help with this issue we are facing while importing configurations ( PTO ) via order import process.
The scenario is like this : we have parent PTO Model Item : A and under this we have 2 Option Classes within the BOM: OC1 & OC2
Each of these option classes have 2 items each : option class - OC1 has ( Item B & Item C) while option class - OC2 has ( Item D & Item E)
Now in the OM interface tables we want to interface : PTO Model Item A and along with it the Item B and Item E ( one item from each of the option classes). Hence we populate the oe_lines_iface_all table the below mentioned fields
inventory_item, item_type_code , orig_sys_line_ref , top_model_line_ref, ship_from_org
A                     MODEL               1.0                        NULL                      S1
B                                                                            1.0                         S1
E                                                                            1.0                         S1
--Now when we run the Order Import we are getting errors : "org_sys_line_ref cannot be NULL" and errors - "item B and E are not found in the BOM of the model A"
--when we try to populate the orig_sys_line_ref columns values for Item B and E as let's say 2.0 and 3.0 , still we get the "items not found in the BOM of the model A error message". But when we check the BOM these component items are present there.
With the same Model Item A and Option class component items B and E we are able to create an order successfully within OM frontend screen and the BOM structure for the PTO Model A is also active and enabled.. This is a Published BOM for the PTO Model Item A
Could someone please help as to what additional columns need to be populated or what needs to be done in order to get this resolved.
Thanks

We referred the Oracle OM related white paper from metalink :
Oracle Order Management Suite White Papers (Doc ID 113492.1) - Importing Configurations

Package Configuration via SQL Server For a Reporting Queue

The scenario is a reporting queue for a web application. Currently when a user queues a report it stores the parameters in a table by queue ID. When that report is set to run the database creates a dtexec command with all the parameters. We use this
method for transferring the values the user selected to the SSIS packages.
I have used SQL Server package configurations before but they are usually a single table with a distinct ConfigurationFilter column. Is it possible to take the standard table layout for the SQL Server package configuration and add another column, say
QueueID. We send the QueueID to each package at run time and use this value to filter the table to the configuration specific to that report?

Here is a better break down of the current process:
1. A user goes to the web application and selects a report/parameters.
2. This will add data to [QUEUE] and [QUEUE_PARAMETERS] tables associated by the QUEUE_ID
3. The server has a windows service which looks for reports in the [QUEUE] table in pending status and gets the next one available and calls a stored procedure with that QUEUE_ID.
4. The stored procedure puts together a dtexec command through xp_cmdshell which contains all the user parameters from the [QUEUE_PARAMETERS] table.
The purposed process is to replace the self made [QUEUE_PARAMETERS] table with the package configuration table. This means we would only have to send the QUEUE_ID via the dtexec command and not all the other parameters. The problem is that if
I add QUEUE_ID to the package configuration table I am not sure how I would reference a specific QUEUE_ID from the SSIS package configuration dynamically. There does not appear to be an expression that can be applied to the package configuration in SSIS
which means the relationship must make the ConfigurationFilter field unique, even though it is not a primary key.

Hyper-V Replication - Subnet Configuration Between Datacenters?

I'm designing a DR solution in a geographically separate datacenter which will use Hyper-V 2012 R2 Replication to replicate several of our VMs to another Hyper-V cluster. The VMs will run a mix of Linux and Windows, with the Windows servers being Exchange,
SharePoint, WSUS, etc.
I currently have a static IP assigned to all servers and VMs, i.e. I'm not using static DHCP reservations.
I have the ability to extend the private LAN subnet (let's call it 192.168.1.1) between the two datacenters over the public Internet using my firewall's VPN capability, but I'm wondering if there is a recommended best/better practice for this?
Is it okay to extend the subnet so in a fail-over scenario I can just power the VMs on in the DR datacenter without much manual intervention? Or would it be a better idea to configure my servers with a static DHCP reservation, so when they come up in the
DR datacenter they can pull an IP on a unique subnet?

Hello Matt,
The answer is yes for Hyper-V 2012 R2, however this feature was available only for Windows Guest OS'es in Hyper-V 2012.
This works only on synthetic network adapters, not legacy network adapters, and it requires Windows XP SP2/Windows Server 2003 SP2 and newer OS'es to be running on the virtual machine to work. This
also works with Linux virtual machines that are running the latest Linux distributions.
As a good practice is to complete the failover TCP/IP configuration on the primary virtual machine with its normal IP configuration. In that way, if the replica is ever activated, replication is
reversed, and the virtual machine is then failed back to what was the primary, and the correct IP address for the primary location can automatically be put back.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread.
This is incredible. We are running Hyper-V 2012 R2 with the latest CentOS 6.5 and synthetic network adapters. Thank you so much.
Oh, hey! I read your blog! :)

Scheduling Agreements configuration steps required Plz !

Dear Sapients,
I request you all to help me in providing the configuration steps for Scheduling Agreements and relevant Schedule lines configuration.
Its urgent please help me !!
Regards,
Sreedhar.

Hello,
please have a look at the following links:
http://help.sap.com/saphelp_media472/helpdata/EN/dd/56078c545a11d1a7020000e829fd11/frameset.htm
and
http://help.sap.com/saphelp_media472/helpdata/EN/da/76ab04ebea11d1954900a0c9306667/frameset.htm
I hope that you find here all information which you want.
Regards
Claudia

Replication agreement configure via DSCC

Similar Messages

Maybe you are looking for