Replication between DS5.0 and DS4.X

The iPlanet DS5.0 documentation is a bit unclear..
Can I set up a replication-agreement between a DS5.0 and a DS4.X where DS5.0 is the master and DS4.X the consumer?
Thanks and regards,
Oscar

No. You can only replicate from a 4.x supplier to a 5.0 (or later) consumer.

Similar Messages

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Replication between Oracle and SQL Server

Does anyone have any experience with replicating data between SQL Server and Oracle database system? If so, I am experiencing time out errors when replicating data. I replicating from SQL Server 2k to Oracle and it time out on the Oracle side.

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

Material replication between SAP and SRM

Howdy friends.
Is there any way to stop having to manually activate the material replication queue between SAP and SRM each time please?
Our admin team go to transaction SMQ2 each day and for 2-3 years have been manually activating each queue manually and doing this several times per queue as the entries do not reach zero. Surely, it is possible to set this up to be automatic as a job?
Ciao,
Mike

Hello,
I could not find the SDN Weblog but here a link to an article that migh help you....[url]http://searchsap.techtarget.com/tip/0,289483,sid21_gci1245134_mem1,00.html[url]
That should help you check your settings, et al and resolve your issue.
Regards, Dean.

CMS Replication between Edge and Front End

Hello Support
We have a global Lync Deployment with CMS Store located in UK
We have installed new AU Lync-FE and Edge server but the CMS replication between Front End Server and Lync Edge is not working
I have test 4443 and certainly open. Lync Edge server or the FE server does not logs anything in event viewer.
I have used OCSlogger but I could not find any issue
I have checked certificates and they are all valid.
Can I please get some guidance.
Thanks
Naimesh Mistry
+61401446946
Naimesh Mistry

HI NImesh,
First if you are looking at Lync control panel you might see the Cross because Edge server is non domain machine.
you can check the command Get-CsManagementStoreReplicationStatus
Also there are Cert problem which could lead this issue
The root CA certificate should be located in Trusted Root Certification Authorities ONLY,
and must be removed from any other container.
The intermediate CA certificate should be located in Intermediate Certification AuthoritiesAND Trusted
People ONLY, and must be removed from any other container
Also create the below registry values.
created2 registry values in:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL as follows (to prevent schnnell.dll from
interfering with validating the certificates by Edge server):
Value
1:
Name: SendTrustedIssuerList
Type: DWord
Value: 0
Value
2:
Name: ClientAuthTrustMode
Type: DWord
Value: 2
then try to reboot the server and run this command Invoke-CsManagementStoreReplication
Hope this works.
Regards
Zahoor

I need step by step way to make replication between oracle and sql server

I succeeded in make dblink between oracle and microsoft sql
and I try to insert data using dblink to microsoft sql
what will I do now to make replication between them

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

SQL Database replication between Primary and DR site

Hi,
We are setting up a DR Site, for our Production SAP system.
At present the curren setup for Production SAP system are as follows.
SAP ERP 2005 (SAP ECC 6.), ABAP+JAVA on Windows with MS SQL Server
2005.
Data are stored on SAN and SAP installed on MSCS Cluster enviornment.
For Setting up the DR site, we are setting up Central System
installation and replication will be configured between SAP
Production/Primary system and DR site.
We are shoadwing at our test setup and facing below replication issues
while setting up transactional replication in MS SQL server 2005.
1. At present 78716 articles are available on Production Database, and
SQL fails the replication publication after 59000 articles.
We open the ticket with Microsoft and below are the suggestion provided
by them.
1. Microsfot suggest to prepare 2\3 publications for total number of
tables, 1 publication for all Views and 1 publication for SPs,
Functions and Data types with single Distributor Agent. Distribution Agent will
take care of propagating changes in the tables across the publications.
2. All related tables (Parent child relationship) to be published on
one publication.
3. It would recommend to create 4 publications: 2 for the tables, 1 for
the views and the other for the stored procedures. This would ensure
better manageability.
The main concerns here is about splitting the tables into two different
sets with about 30,000 in one of the publications and the rest in the
second publication.
You will have to make sure that all the dependant tables are included
in the same publication. Since this database is a SAP database, requesting to provide information as follows.
1. Identify and split the entire set of table into two/three groups.
2. How to publish dynamic tables (The tables which get created post
publication process).
Regards,
JP

Hi,
for database mirroring and log shipping there a several very good whitepapers and other documents out there:
[http://download.microsoft.com/download/d/9/4/d948f981-926e-40fa-a026-5bfcf076d9b9/SAP_SQL2005_Best%20Practices.doc]
[http://blogs.msdn.com/saponsqlserver/archive/2007/09/26/what-did-we-learn-using-database-mirroring-over-the-last-two-years-in-our-sap-erp-system-second-revision.aspx]
[http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032297524&EventCategory=5&culture=en-US&CountryCode=US]
[http://sqlcat.com/whitepapers/archive/2007/11/19/database-mirroring-best-practices-and-performance-considerations.aspx]
Furthermore see note 965908 for this.
The needed bandwidth depends on the amount of log you create in a given timeframe. Internet bandwidth can be suffient, if you don't generate much log (btw, i don't understand the term RTD is 220).
In the log shipping scenario you can run the DR site in standby mode, then a readonly access (as DBCC etc.) is possible.
Regards
Clas Hortien

Replication between DC and ADC

we all know that is there any changes happen in dc it will automatically replicate to ADC.some time quickly or some time very late. i just have a one query
how should ADC knows that there have been some changes happens in DC
Abp

In addition,
USN is unique in every DC but Version number should be same ; if there is no replication in queqe.
Repl works based on the USN & version number.
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

ACS Database Replication between SE and Windows

I currently have 2 Windows ACS servers (4.0.1.27) in production and replicating databases. I also have a solution engine (appliance) running 4.1.4.13.7. I plan to upgrade the Windows ACS servers to 4.1.4.13.7 (same as the SE). I know that the software versions have to match for replication to work. Recently, I received conflicting information about database replication. I was told that a ACS SE (solution engine 1113) can not replicate to a Windows ACS server, even if the software versions match. Before I change my production environment, I thought would seek out additional input.

Yes, you can replication acs windows with acs appliance. It works fine.
Regards,
~JG

Replication between Oracle Server and MS SQL Server

Hello,
Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
Thank you.

Viacheslav Ostapenko wrote:
Sorry, Aman,
I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
Aman....

REPLICATION BETWEEN ORACLE 10g and postgresql/MySQL/MSSQL SERVER??

Hi Friends.
I want to know if there are a manner of replication between ORACLE and (postgresql or mysql or mssqlserver).
Please, my email is [email protected]
Thanks
Manuel

Sure.
Are you talking about replicating data in one direction? If so, in which direction (Oracle to non-Oracle or non-Oracle to Oracle)? Or are you talking about bidirectional replication?
Which database do you want to be the "master" (i.e. initiate the push or pull of data)?
What sort of lag is acceptable? Minutes? Hours? Days?
Justin

Data Sync between ORACLE and SQLServer

Hi,
I would like to here the possible options for "Bi-Directional Data Sync" between ORACLE 10g (Enterprise Edition Release 10.2.0.4.0) and SQL Server 7.0 (7.00 - 7.00.961 Standard Edition on Windows NT 5.0 ).
Please let me know the available tools or any other addons.
thanks and regards,
Suman.S

Are you looking for transactional replication between Oracle and SQL Server? Take a look at Wisdomforce [DatabaseSync.|http://www.wisdomforce.com/products-DatabaseSync.html]
It can perform a [real-time change data capture|http://www.wisdomforce.com/products-DatabaseSync.html] of transactions from redo log files and apply them into Oracle or SQL Server

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

Configure replication between directory server 5.1 and 5.2

we have two directory servers running on different machine 5.1 and new 5.2. All database have been successfully backup and restore from 5.1 to new 5.2. In this scenario, we would like to setup 5.1 and new 5.2 D.S as multi-master replication.
As described in the sun Documentation, we have copy few ldif file from new 5.2 to 5.1 so that both schema are up to date.
The new instance of 5.2 is running fine. However, on the other hand, 5.1 has a problem to start the server as show in the following below.
# ./start-slapd
[31/May/2005:14:07:43 +0800] dse - The entry cn=schema in file /usr/iplanet/servers/slapd-ifpdev02/config/schema/50ns-admin.ldif is invalid, error code 21 (Invalid syntax) - object class nsAdminServer: Unknown required attribute type "nsServerID"
[31/May/2005:14:07:43 +0800] dse - Please edit the file to correct the reported problems and then restart the server.
Any help from you guys are greatly appreciated.

I recommened that you read the Release Notes of DS5.2, there are some notes on Replication between 5.1 and 5.2.
===
In Directory Server 5.2, the schema file 11rfc2307.ldif has been altered to conform to rfc2307. If replication is enabled between 5.2 servers and 5.1 servers, the rfc2307 schema MUST be corrected on the 5.1 servers, or replication will not work correctly.
Workaround
To ensure correct replication between Directory Server 5.2 and Directory Server 5.1, perform the following tasks:
* For zip installations, remove the 10rfc2307.ldif file from the 5.1 schema directory and copy the 5.2 11rfc2307.ldif file to the 5.1 schema directory. (5.1 Directory Server Solaris packages already include this change.)
* Copy the following files from the 5.2 schema directory into the 5.1 schema directory, overwriting the 5.1 copies of these files:
11rfc2307.ldif, 50ns-msg.ldif, 30ns-common.ldif, 50ns-directory.ldif, 50ns-mail.ldif, 50ns-mlm.ldif, 50ns-admin.ldif, 50ns-certificate.ldif, 50ns-netshare.ldif, 50ns-legacy.ldif, and 20subscriber.ldif.
* Restart the Directory Server 5.1 server.
* In the Directory Server 5.2 server, set the nsslapd-schema-repl-useronly attribute under cn=config to on.
* Configure replication on both servers.
* Initialize the replicas.
===
Also search for "migrate" or "repl" or "5.1" in Release Notes and read the relevant information.
http://docs.sun.com/source/817-7611/index.html
Another guide is "Installation and Migration Guide"
http://docs.sun.com/app/docs/doc/817-7608
HTH.
Gary

Replication of text determination (business partner) between ERP and CRM

Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
Andreas

Andrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj.

Replication between DS5.0 and DS4.X

Similar Messages

Maybe you are looking for