Replication Error: Determination of values for application was interrupted

Hello,
We are setting up a CRM 5.0 system, with an ECC 5 backend. We try to replicate the condition customizing (object DNL_CUST_CND). When I look in the object monitor the object gets status green after running. But in SLG1, the log shows over 200 warnings and 3 critical errors with message:
Determination of values for application was interrupted
Message no. CND_MAP837
There is not more information available and I can't find anything relating to this message here or in OSS. Does anyone have a clue what the cause of this error could be?
Thanks in advance,
Jeroen

Hello Jeroen ,
You may find  the warning message bcos all the R/3 fields may not be available in
CRM system. thus those condtion tables may not be mapped and inactive status.Check whether the condtion tables used in ur scenario is available in active status in CRM.
Regarding the  data exchange of condtion the follwing oss notes will be helpful:
1. 314542.
2. 441485 this note containst the  message relevant to you (CND_MAP837) .
Please check the above notes and try to analyse ur issue.
Regards
Bala

Similar Messages

  • Abort Couldn't determine the value for 0P-KEYD2 from Authorizations

    Hi All,
    When attempting to open a query, i'm encoutered with an error like "Abort Could not determine a value for variable 0P_KEYD2 from the authorisations".
    Last month it was working fine, and working fine in Quality enviroment also.
    If anyone come across such situation or any ideas, Please help me out in this regard.
    Awaiting to see replies for this.
    Regards,
    PRK.

    Dear PRK,
    I'm facing exactly the the same problem - which solution did you finally find.
    Regards,
    Axel

  • Error: Missing initial value for session parameter

    Hi,
    I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
    ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR:  Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
    ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
    When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
    Please anyone give me an idea what is causing the problem.
    Thanks,

    in DAC > Run History > Task Details, query
    Name = SDE_ORA_Product_Category_Temporary
    Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
    -lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
    Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

  • Abort Could not determine a value for variable 0DAT from the authorizations

    Hi All,
    I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
    Can anyone help me in finding a solutionn to this issue.
    Thanks,
    Kartik.

    Hi Kartik,
    I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
    Hope this helps,
    Bye...

  • Error in parsing value for ... Declaration dropped.

    Hi,
    I'm using Fedora 16. Everything is working perfect and Firefox was working perfect (version 9). But version 9.0.1 creates big problems for my intranet and webpages, including yours. The error console fills up with 100' of error messages like; 'Error in parsing value for '(background, display, moz-opacity, filter...)' . Declation dropped. Some tags (on my intranet) like fontsize are "bigger", it seems like Firefox skips my CSS settings, the same for some CSS page layouts. One page example is that one only dropbox fontsize is displayed correctly, the other 17 are not CSS formatted.
    I have done all your posting regarding to solve problems, reading all posting but nothing helps.
    Ny own research for the problem
    Switch to the web browser Konqueror, everything about layouts and fonts displays properly (other things like '-moz-border-radius' is of course not working.
    I also have a windows computer with Firefox 9.0.1. Everything is displayed properly with the same amount of error messages as in FF for Linux! The same goes for Internet Explorer 9 in windows (everything displays properly).
    Confusing. Is it a Fedora problem or FF for Linux problem?

    I found a solution to the problem. Uninstall Firefox and Firetray. Delete /.Mozilla folder. Reboot. Install Firefox. Now everything is displayed properly.

  • Cannot determine a value for an exit variable in the Formula fn w/p empty

    Hi All,
    We have an exit variable Z_EX_AR_VAR, the would read a hierarchy node input variable (Z_HN_AREA), which is furthur based on a hierarchy input variable (Z_HR_AREA), and wouuld return the first leaf of it.
    We have implemented a input ready query based on this exit variable and it is getting the first node and is input ready and saves the data to the database.
    It works well in the query when we have filtered the characteristic with the hier and hier node and the exit variables.
    We need to use the same value to be used in the Fox function.
    As per the requirement, the Fox function has to process the zero (empty) records.
    So, we have customized formula function to process emptry records.
    And in the function of type formula function that processes empty records, we have used the following statement.
    DATA AR type ZAREA.
    AR = VARI ( Z_HN_AREA, HIENM=Z_HR_AREA, 1).
    We are getting the following error message:
    Cannot determine a value for the variable Z_HN_AREA.
    Planning function ended with errors.
    What is that we are doing wrong here. Is it with the 'Process Empty Records' function that cannot read the variable.
    How come this variable is working in the query and it is not working in the FOX.
    We have done the variable to variable binding in the WAD also. Still the same problem.
    Any ideas? Thanks in advance.
    Best Regards,
    - Shashi
    Thanks in '

    Hi All,
    Michael Wolf from SAP confirmed that we cannot use VARiable read functions in the customized Formula function that processes the zero (empty records) as he spoke to SAP AG about the issue.
    Hence we have made a work around by creating a valid record using a dummy key figure in the Custom Formula function that processes empty records so that in the next step, the regular Formula function would get executed, where we could access the variable values by using VARV, VARI functions.
    Thanks,
    - Shashi

  • Error determining planning periods for calendar

    Hello SAP Guru's
    We are receiving the above error when trying to go into MD04 for a particular material.  we have checked the forecast agains the planning calendar and the dates in the forecast and demand planning are approximately 2 years less than the end date in the planning calendar.
    Checking SAP it has said to extend the planing calendar past the planning horizon. It is already extended past the planning horizon.
    The only issue with this product is that the material will soon be superseded by another material, this has a different calendar assigned to it.  Could this be the problem?
    Any info gratefully received.
    Thanks
    Sue

    Hello Vicky,
    The error occurs when first going into MD04.  The exact error message is as follows:
    Error determining planning periods for calendar M14
    Message no. 61123
    Diagnosis
    The system could not determine sufficient planning periods by the planning calendar to group requirements by planning calendar periods for all the requirements planned in the future.
    System Response
    When a material is planned by using the periodical lot size by planning calendar, sufficient periods must be calculated to group requirements by the planning calendar for all requirements.
    Procedure
    Rework the planning calendar with which the material was planned, which means calculate new planning calendar periods.
    To do this, go to Customizing for MRP, under the activity Change PPC periods.

  • "Error determining planning periods for calendar "  when running a program

    Hi,
    When i am running a program with date range say "01/05/2011" to "30/06/2011",the program is executing successfully without any error. When i am executing the same program with date range as a) "01/05/2009" to "30/06/2011" and b)"01/05/2008" to "30/06/2011" the program is failing with error as "Error determining planning periods for calendar". Can anyone suggest me what i should do to avoid the failure of the program with above date ranges also.
    Thanks in advance,

    Dear,
    Error message 61123:"Error determining planning periods for calendar &".The PPC planning calendar specified in the material master MRP 2 view for the material is  incorrectly.
    The planning calendar periods are insufficiently maintained for the planning calendar used.
    Check the period of planning calendar in MD26 and generate the correct period.You can avoid the problem in several ways:
    Maintain the planning calendar far enough in the future (at least until beyond  the end of the planning horizon).
    Also check any demand is lies beyond the validity period of planning calendar.
    Reduction of the planning horizon of MRP also can control such issue, as MRP planning horizon lies in an area in which the planning calendar is no longer maintained
    Regards,
    R.Brahmankar

  • Error Specify a value for variable-Abort System error in program SAPLRRK0 a

    Dear Experts,
    Could anyone help me to fix this issue?
    I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
    The error message is
    Error Specify a value for variable ZR00**
    Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    Many thanks in advance.
    Regards.
    Krishna.

    Hi Kishor,
    try runnig the same query in RSRT, with execute and debug option.
    Also check in query designer for its correctness.
    Hope this helps...
    Regards,
    umesh

  • I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

    Dear ALL,
    i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
    var myBookFileName ,myBookFileName_temp;
                    if ( myFolder != null )
                            var myFiles = [];
                            var myAllFilesList = myFolder.getFiles("*.indd");    
                            for (var f = 0; f < myAllFilesList.length; f++)
                                        var myFile = myAllFilesList[f]; 
                                        myFiles.push(myFile);
                            if ( myFiles.length > 0 )
                                        myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                        myBookFileName_temp=myFolder.name ;
                                        myBookFile = new File( myBookFileName );
                                        myBook = app.books.add( myBookFile );  
                                       myBook.automaticPagination = false;
                                        for ( i=0; i < myFiles.length; i++ )
                                                   myBook.bookContents.add( myFiles[i] );             
                                        var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                        var bookComps = myBook.bookContents;
                                        if (bookComps.length === 1)
                                                       bookComps = [bookComps];
                                         var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                        app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                      //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                      //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                        myBook.close(SaveOptions.yes);      

    Change the below line:
    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
    to
    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
    Vandy

  • Firefox is having a problem with Linkedin. I get the error, error in parsing value for "backgroun" and for "filter"

    When trying to send messages in linkedin, firefox takes me back to the log in screen without sending the message. On the error console it shows the error; error in parsing value for "background" and error in parsing value for "filter". What is causing this?

    Pages does not support the Apple font used for color emoji, so that behavior is normal.
    With what app are you reading the yahoo mail?  There is really no guarantee than any other email service will show the special Apple font involved.
    You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
    You should also be able to upload graphics here easily by clicking on the camera icon.  My email is tom at bluesky dot org.

  • HT1725 In a download of an entire album, one song download was interrupted.  I have followed the instructions for resuming the download, but each time I attempt to resume the download the same error message appears saying the download was interrupted. Ans

    While downloading an album in from the Store, one song was interrupted.  I have followed the instructions from apple about resuming the download, but every time I do so the same error message appears saying the download was interrupted.  I am having no connection problems, have rebooted my computer, downloaded the lates version of iTunes, etc., yet nothing changes.  Has anyone else experienced this, and are there any workarounds.  Sadly the problem hit on one of the best songs of the album.

    I had the same problem so (assuming under the Purchased items in the Store you have a song stuck at 'Downloading'):
    I went to Music, then Artists.
    From there I chose the album.
    The song that failed to download had the cloud symbol next to it.
    I clicked the cloud symbol and the song completed the download for me.
    (Please note this was in iTunes for Windows - I expect it to be similar in iTunes for Apple)
    Message was edited by: UbergeekRFC - parenthetical note added
    Message was edited by: UbergeekRFC - added note about song stuck as downloading

  • How to determine the values for Model Parameters in Forecasting

    Hello Gurus,
          On basis we will determine the values  for the Model Parameter values (Alpha, Beta, Gamma, Sigma).
    Thanks,
    Siva.

    Dear Siva,
    the values are dependent from the forecast stratey and forecast model.
    The forecast strategy determines the method or the techniques that are used to create the forecast. You set the forecast strategy in the forecast profile.
    There are some settings that you must make for certain forecast strategies. The table below shows you which settings these are. You make these settings either in the univariate forecast profile or under the Model and Parameters tabs of the Forecast view on the demand planning desktop.
    Model initialization is the process by which the system determines the necessary model parameters for the chosen forecast model. These parameters are in following link:
    http://help.sap.com/saphelp_scm50/helpdata/en/ac/216b74337b11d398290000e8a49608/frameset.htm
    I hope this helps you further.
    Regards,
    Tibor

  • Font in SVG file is not displayed correctly. "Error in parsing value for 'font-size'. Declaration dropped."

    I am trying to view an SVG file but it is unreadable because the font in the diagram is too large.
    In the Firefox error console, I see a CSS error:
    Error in parsing value for 'font-size'. Declaration dropped.
    What's happening?
    (Please cc your reply to [email protected])

    Firefox's Error Console (Ctrl+Shift+J) collects lots of those style rule warnings. Some style rules only work in particular browsers (such as "filter" which is for IE), so Firefox notes that it doesn't recognize them. This information is more for the web developer's benefit than yours, since you can't do much to change the site.
    To see serious errors and filter out the style warnings, click the Errors button at the top. Hopefully a lot less clutter.
    Anyway, are you asking because something isn't working correctly?

  • Error in parsing value for 'clip'. Declaration dropped

    I have a site working for years, www.atlantida-adm.com.br, with the new version a javascript box with scroll doesn't work.
    It still working on IE, but my customers are asking me why stop work on Firefox.
    I use Firefox 15.0.1 as my default browser and I'm trying to do the same into the company.
    The scroll box are titled as "AVISO"
    The full message: Error in parsing value for 'clip'. Declaration dropped

    This is FF being pedantic about code...
    If you're trying to set a CSS Style measurement property with Javascript, you need to specify the measurement unit (eg "px", "%", "em", etc as you do in CSS) as a string. Passing an integer (without the measurement unit) into the property value causes the error.
    Example:
    <pre>
    var w = 10; //Assign an integer to variable w
    /* Now let's try passing w to set the CSS Width property of ''element'' */
    ''element''.style.width = w; // This Generates an error in FF,
    // but works fine in IE (IE doesn't generate
    // an error because it just assumes you mean "pixels"
    // when you pass an integer in the script.)
    ''element''.style.width = w+"px"; // This works in both FF and IE. Will set the width to 10 pixels.
    </pre>

Maybe you are looking for