Replication Error in Goldengate SQL Server 2005 to Oracle.

Dear All
SQL Server 2005 is my source database and oracle is my destination database when i run my param file at source side following error occur.Kindly suggest the solution.
ERROR OGG-00146 VAM function VAMInitialize returned unexpected result:
error 600 - VAM Client Report <MSSqlVam: (1) At least one option of type MANAGESECONDARYTRUNCATIONPOINT
needs to be specified for TRANLOGOPTIONS (DSOPTIONS)>.

The GoldenGate forum is over here:
GoldenGate
(question is somewhat old, but unanswered)
SQL Server setup - you have to choose one of two options for the truncation point and the transaction log:
If the Extract process is running against a SQL Server 2005 source, use the TRANLOGOPTIONS
parameter to control whether Extract or SQL Server maintains the secondary truncation
point. This is a required parameter and must contain one of the following options:
SQL Server replication maintains the truncation point
Use TRANLOGOPTIONS with the NOMANAGESECONDARYTRUNCATIONPOINT option if Extract and
SQL Server 2005 replication or a third-party replication program will be running at the
same time for the same database.
Oracle GoldenGate maintains the truncation point
Use TRANLOGOPTIONS with the MANAGESECONDARYTRUNCATIONPOINT option if Extract and SQL
Server 2005 replication or a third-party replication program will not be running at the
same time for the same database.
See page 29 in the SQL Server setup and installation guide

Similar Messages

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

Migration From SQL Server 2005 to Oracle DB through Oracle SQ Dev Problem

Hi all,
we are trying to do a full Migration from MS SQL Server 2005 to Oracle DB 9.2 i
we are using Oracle SQL Developer V 1.5.3,
the capturing of the DB and the conversion to the oracle model completed succefully
however when we try to generate the scripts from the converted model
the script generation hangs on a sequence and no further progress is made (the script generation pop up keeps still on a certain sequence displaying its name, and thats it )
no error messages are displayed,
how can we know the reason for this? or atleast find a log for whats happening...
any suggestions?
Thank you

Hi,
migrating a sequence shouldn't make a problem. I did a quick test. I created this table in SQL Server:
create table test_seq (col1 int identity(1,1),col2 char(1))
Then I captured the table, converted the table and generated the script. There was no problem.
CREATE SEQUENCE succeeded.
CREATE TABLE succeeded.
Connected
TRIGGER test_seq_col1_TRG Compiled.
As you see, applying the script was also successful.
I am using Oracle RDBMS 11g, I don't know whether this makes a difference. Do you have any 11g instance available to test it?
Can you show me one of the sequences that are causing the hang? Is the CREATE SEQUENCE statement already in the generated script, or not? Your table is for sure more complex than my simple example.
Regards,
Wolfgang
Edited by: wkobargs on Jan 13, 2009 3:01 AM

Migration from of database and app from SQL server 2005 to Oracle 10g

Hello Every body,
Lately, I have been requested to migrate one inhouse developed hub application from SQL server 2005 to Oracle 10g. The objective is to move application and also the database to Oracel 10g.
Here is the current platform:
OS Win 2008 64 bit
JDK 1.4.2
JBoss 3.2.5
EJB 2.1
My question is what kind of issues you guys see in above upgrade. As far I know, Schema and Database migration can be done by Oracle workbench. Oracle 10g supports JDK 1.4. Oracle 10g also supports EJB 2.1.
Anything, I need to take into consideration or any risks or problems. I would like to list down all the risks, and accordingly, I am thinking of start the upgrade.
Thanks in advance.
Regards,
Zeeshan Qureshi

In general the Java/J2EE application needs work in the following categories:
1. Connection Settings: Use Oracle JDBC drivers, create new data sources, connection pools and what not. Disable AUTOCOMMIT for Oracle JDBC Connections.
2. For EJBs, you should regenerate the entity beans because some object names/column names might have changed in oracle.
3. Any custom SQL that is in use in the EJBs will have to be ported to Oracle just as you would do in stored procedures and other applications.
4. For Java front-ends, if you are using callouts to stored procedures and expecting result sets then they will require some changes. You need to modify the stored procedure call signature to include the REF CURSOR variables and process them.
5. Changes to any SQL Server specific database functions manipulating character/date data will be required.
6. CLOB/BLOB/XML apis are different across databases so if you are using those then focus on them as well.
7. Retreiving Auto/generated keys from database also may need changes from what I have seen.
Hope this helps..
Regards
Prakash
NOTE: Not sure why but my posts from yesterday are not visible today. Even worse is that I can see them in one browser (FireFox) but not in Internet explorer. Crazy browser day I am having.

Migration from SQL Server 2005 to Oracle 10g

Dear buddies,
I need to migrate my tables with data from SQL Server 2005 to Oracle 10g. How can I do it in the best possible way?
Please guide me.
Nith

Nith,
I doubt if there is one best practice that can cover all cases of migrating data from sql server to Oracle. l generally find various factors case-by-case that make me chose one approach over the other. Without considering the business case and environment specific factors, some of the things I would like to know would be: The data types of the tables columns, table sizes, number of tables and if this is a one time process or a recurring process.
One of the easiest (some times rather pesky) process would be:
-Dump source data (Sql Server data) into flat files, csv or any preferred format
-Setup a set of staging set of tables in the destination DB (Oracle in your case). You can setup the stage tables to enforce data-types, value sets and even some level of integrity constraints or any data logic or what ever you would like to filter out. Load the flat file data into a set of Oracle stage tables (Sql*Loader would be a good candidate)
-You can always move data from these stage tables to you application tables
You can script this whole process to run as batch or on demand or how ever you would like.
I am sure you can google and find a bunch of proprietary as well as open source tools to do the same with little to a lot of work.
good luck!

DB Migration from MS SQL Server 2005 to Oracle 9i

Hi Guys
I want to migrate the data from Microsoft SQL Server 2005 to Oracle 9i.
Could ou please suggest me the how to proceed.
I can simply extract the das in CSV format as their are Foreign key , Primary key concept is there. So what will be the best way to proceed ....
regards
Macky

Macky,
In the coming months we will add support for SQL Server 2005 to the Oracle Migration Workbench. See our statement of direction on OTN for more details.
If you have extracted the data into a csv file format, you could construct a SQL Loader control file to load this data, assuming you have already created the table on the Oracle side.
Donal

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

MIGRATE ODI FROM SQL SERVER 2005 TO ORACLE

Hello,
Presently we have our master and work repositories in sql server 2005.We also have our source tables in sql server 2005.We are planning to migrate our repositories from sql server 2005 to oracle 10g.We are also migrating our source tables from sql server 2005 to oracle.Do we need to redo all our development in oracle.Can any body help with the steps to migrate our repositories and development work from sql server 2005 to oracle 10 g.
Thanks,
Revanth

dbf it's not sql server.
>
SQL Server databases have three types of files:
Primary data files
The primary data file is the starting point of the database and points to the other files in the database. Every database has one primary data file. The recommended file name extension for primary data files is .mdf.
Secondary data files
Secondary data files make up all the data files, other than the primary data file. Some databases may not have any secondary data files, while others have several secondary data files. The recommended file name extension for secondary data files is .ndf.
Log files
Log files hold all the log information that is used to recover the database. There must be at least one log file for each database, although there can be more than one. The recommended file name extension for log files is .ldf.
>
for dbf to oracle see http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:711825134415

Migrating From Sql Server 2005 to Oracle (Uniqueidentifier Issue)

If i want to migrate from SQL SERVER 2005 to Oracle, How Oracle will deal with my primary key columns in almost all tables having datatype of UNIQUEIDENTIFIER ???
is there any concept of uniqueidentifier in Oracle same as in SQL SERVER ????
Regards

When you migrate your SP's from SQL Server to Oracle the parser basically does 'as good a job as it can' to migrate them.
Luckily, using SQL Developer you are able to look at the source SP and converted SP in windows next to each other and see what oracle has done to them.
You can also paste your SQL Server code into a window and ask SQL Developer to translate it to oracle for you. Use the 'Translation Scratch Editor' on the migration menu if this is something that interests you. I was told that the parser used by the Translation Scratch Editor is different to the parser used when migrating the whole database.

Error while installing SQL Server 2005 SP3

I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.

I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.
Just to add: Have already referred
http://support.microsoft.com/kb/918357

Error connecting to SQL server 2005 from Dreamweaver 8

Hi I have a database in SQL server 2005.I just started using
dreamweaver's server behaviours.When I use the "log in" behaviour I
get the following error.
Microsoft VBScript compilation (0x800A0401)
Expected end of statement
/MyBlog/Connections/connBlog.asp, line 9, column 38
MM_connBlog_STRING = Provider=SQLOLEDB;workstation
id="FAZ-F6EE655890B";integrated security=SSPI;data
source="FAZ-F6EE655890B\SQLEXPRESS";persist security
info=False;initial catalog=MyBlog;
-------------------------------------^
First thing that came to my mind was obviously my database
conn isnot right but when I define a conn using the built in
dreamweaver's dialogue and test it, it says that the test
succeeded.Also in the dialogue for the "login page" it shows the
values of fields from the database, so it is definitely connecting
to the database.So I don't know why am i getting this error.Please
someone help!

See if this TechNote helps:
ASP error "VBScript compilation error '800a0401' "
http://www.adobe.com/go/15717
Are you using the ASP VBScript server model?
Try creating a simple recordset that displays all records
from a table and
see if you can get that to work. It's less complex code than
the user
authentication server behavior and might help to isolate the
problem.
David Alcala
Adobe Product Support

Errors while migrating from Microsoft SQL Server 2005 to Oracle 9i

Hi All,
We are trying to completely move our application from Microsoft SQL Server 2005 Database to Oracle 9i. I am doing it using the latest version of Oracle SQL Developer (1.2 build 29.98).
When I right click my MSSQL server db and click "Capture Microsoft SQL server", it just shows a dialog with "Close" enabled.
Kindly help.
The migration Log has the following messages:
oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
Error ocurred during capture: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
I cant figure out what do these messages mean.
Regards,
Sandeep

Pasting the errors on logging page, if this is of any help:
SEVERE     150     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     151     1485     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
SEVERE     152     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     153     10954     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
SEVERE     154     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     155     2688     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
SEVERE     156     1140     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     158     62172     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     160     3672     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
SEVERE     161     63     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
SEVERE     162     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation

Error while Viewing SQL Server data from Oracle

Dear Friends,
I am using Oracle10g XE.
I have made a connection to view or insert data in SQL Server Database from Oracle.
I have done all the things with the help of below link.
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Everything worked fine. but when i run below query
select "EmployeeNo" from hrtattendance@mysqlserverdsn
it gives an error which is mentioned below
ERROR at line 1:
ora-28545: error diagnosed by Net8 when connecting to an agent
Unable to reteieve text of NETWORK/NCR MESSAGE 65535
ORA-02063: preceding 2 lines from MYSQLSERVERDSN
Please help. I will be thankful.
Regards,

Dear Klaus,
Here u go.
C:\>C:\oraclexe\app\oracle\product\10.2.0\server\bin\hsodbc
Oracle Corporation --- TUESDAY   JUN 24 2014 16:28:20.146
Heterogeneous Agent Release 10.2.0.1.0 - Production Built with
   Driver for ODBC
C:\>C:\oraclexe\app\oracle\product\10.2.0\server\bin\tnsping MYSQLSERVERDSN
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-JUN-2
014 16:28:33
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT
=1522)) (CONNECT_DATA=(SID=MYSQLSERVERDSN)) (HS=OK))
TNS-12541: TNS:no listener
C:\>C:\oraclexe\app\oracle\product\10.2.0\server\bin\lsnrctl status LISTENERMYSQLSERVERDSN
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-JUN-2014 16:28
:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   32-bit Windows Error: 61: Unknown error
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   32-bit Windows Error: 2: No such file or directory
C:\>
Regards,

Issue with migration DB from SQL Server 2005 to Oracle 11.2 using SQL Developer Migration workbench

Hi,
We face an issue while migrating an SQL Server 2005 DB to Oracle 11.2. It fails during the process. I hope someone on the forum has seen this before and can give us some advice.
I use the latest version of SQL Developer with JRE included (3.2.20.09). The JDBC driver to connect to SQL Server 2005 is 1.2.0
Here are the steps we take in the Migration Workbench wizard:
I made an online extract of the SQL Server database.
Using the workbench in SQL Developer I created a migration repository in schema PDM_MIGRATION.
Next I start the migration, it captures the tables fine, but immediately after the start of the conversion I get a failed message without further explanations.
This is the content of the error xml:
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<log>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>SEVERE</level>
<class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
<message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@4c12ab</param>
<exception>
    <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>1078</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>316</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>1002</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>303</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>205</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>159</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
      <line>193</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
      <line>515</line>
    </frame>
    <frame>
      <class>java.util.concurrent.Executors$RunnableAdapter</class>
      <line>441</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>886</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>908</line>
    </frame>
    <frame>
      <class>java.lang.Thread</class>
      <line>662</line>
    </frame>
</exception>
</record>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>SEVERE</level>
<class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
<message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
<param>oracle.dbtools.migration.convert.ConverterWorker.copyModel(ConverterWorker.java:1078)</param>
<param>oracle.dbtools.migration.convert.ConverterWorker.runConvert(ConverterWorker.java:316)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doConvert(FullMigrateTask.java:1002)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:303)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:205)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:159)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)</param>
<param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)</param>
<param>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)</param>
<param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
<param>java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)</param>
<param>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)</param>
<param>java.lang.Thread.run(Thread.java:662)</param>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@5dc1bc</param>
<exception>
    <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>1078</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>316</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>1002</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>303</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>205</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>159</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
      <line>193</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
      <line>515</line>
    </frame>
    <frame>
      <class>java.util.concurrent.Executors$RunnableAdapter</class>
      <line>441</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>886</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>908</line>
    </frame>
    <frame>
      <class>java.lang.Thread</class>
      <line>662</line>
    </frame>
</exception>
</record>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>WARNING</level>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<message>Building converted model: FAILED : Database Migration : FAILED</message>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@15a3779</param>
</record>
Does anybody know what this error means and what steps we should take to continue the migration?
I see the PDM_MIGRATION.MIGR_FILTER is a type.
Many thanks in advance,
Kris

Hi Wolfgang,
Thanks for your reply.
This is how the type MIGR_FILTER looks like:
create or replace
TYPE MIGR_FILTER IS OBJECT (
FILTER_TYPE INTEGER, -- Filter Types are 0-> ALL, 1->NAMELIST, 2->WHERE CLAUSE, 3->OBJECTID LIST
OBJTYPE VARCHAR2(40),
OBJECTIDS OBJECTIDLIST,
NAMES NAMELIST,
WHERECLAUSE VARCHAR2(1000));
I think the repository user has the correct privileges. This is the overview of privileges it has:
SQL> select * from dba_sys_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
GRANTEE PRIVILEGE ADM
PDM_MIGRATION ALTER SESSION NO
PDM_MIGRATION CREATE CLUSTER NO
PDM_MIGRATION CREATE DATABASE LINK NO
PDM_MIGRATION CREATE PROCEDURE NO
PDM_MIGRATION CREATE SEQUENCE NO
PDM_MIGRATION CREATE SESSION NO
PDM_MIGRATION CREATE SYNONYM NO
PDM_MIGRATION CREATE TABLE NO
PDM_MIGRATION CREATE TRIGGER NO
PDM_MIGRATION CREATE VIEW NO
PDM_MIGRATION UNLIMITED TABLESPACE NO
SQL> select * from dba_role_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
GRANTEE GRANTED_ROLE ADM DEF
PDM_MIGRATION CONNECT NO YES
PDM_MIGRATION RESOURCE NO YES
Best regards,
Kris

SQL SERVER 2005 to Oracle 10g r 2

Hi all,
I'm getting an "error" when I'm trying to convert a sql server 2005 database to a oracle 10g database.
It seems to be right in te convert step:
Copying Model: 1
Transforming identifiers: 1
Transformation Result: 16
Transformed successfully: 1
but there is no converted model and no log registries.
the migrations user roles and privileges are:
GRANT CONNECT, RESOURCE, DBA,
ALTER ANY TRIGGER, CREATE ROLE, CREATE SESSION, CREATE USER, CREATE VIEW, CREATE PUBLIC SYNONYM
TO migrations WITH ADMIN OPTION;
GRANT ALTER ANY ROLE, ALTER ANY SEQUENCE, ALTER ANY TABLE, ALTER TABLESPACE,
COMMENT ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY TABLE,
CREATE ANY TRIGGER, CREATE TABLESPACE, DROP ANY
SEQUENCE, DROP ANY TABLE, DROP ANY TRIGGER, DROP TABLESPACE, DROP USER, DROP ANY
ROLE, GRANT ANY ROLE, INSERT ANY TABLE, SELECT ANY TABLE, UPDATE ANY TABLE TO
migrations;
And I'm using Sql Developer Version 2.1.1.64 in a Win XP 64bits computer
Could you please help me with this problem...
Thanks,
Manuel

Manual,
Do you see the same problem if you try the migration in stages ?
Could you -
- click on the SQL*Server database to be migrated and choose 'Capture Microsoft SQL*Server'
- does that complete successfully ?
- if right click on the captured model and choose 'Show log messages' is anything displayed ?
- if the capture is okay, then right click and choose 'Convert to Oracle Model'
- does this create a converted model ? If you right click and choose 'Show log messages' is anything displayed ?
if you still have problems could you try deleting the migration repository then creating a new one ?
Regards,
Mike

Replication Error in Goldengate SQL Server 2005 to Oracle.

Similar Messages

Maybe you are looking for