Replication failing for BP Organization from ECC to CRM

When a BP type Organization is created in ECC the replication to CRM is failing in the middleware with the message R11 126 u2013 BP Category 2 does not fit in the category 1.
The BP type person replicates correctly and the replication from CRM to ECC is good for both types, Organization and person.
When I debug the middleware I can see where it is failing: in the function FM BUPA_CREATE_FROM_DATA line 655. The FM is comparing the person category with organization category which ends in program error.
Is there any table in CRM to map the BP types? Or is this an SAP error?
Thank you,
Aubrey Smith

Hi Aubrey
Please refer to Note 1311313. It may assist with your issue.
Hope it helps
If not I suspect you may need to log an OSS with SAP.
Regards
Arden

Similar Messages

  • Issue with Replication of Bank Account Numbers from ECC to CRM.

    Hi,
    I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER.  How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to  CRM?
    I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
    Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
    Thanks.
    Jennifer

    Willie,
    Thanks for the reply:
    Error: BANK ACCOUNT NUMBER    ******8547 is not valid
    Support pack level:
    SAP_ABA  701  0003
    SAP_BASIS 701 0003
    BBPCRM   700  0002
    Thanks.
    Jennifer

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • Custom data for equipment load from ECC to CRM 7.0

    Dear All,
    Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
    Thanks & Regards
    DB

    Hi,
    You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from  ECC to  CRM are downloaded.
    For more details jut go through
    http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
    Best Regards,
    Rajendra

  • User status transfer for sales orders from ECC to CRM

    Hi,
    We use business process with CRM sales orders that are transfer to ERP.
    Users can change user status in the sales orders in ERP.
    How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
    What is the steps to do this for CRM 7.0?
    Denis

    Hi,
    We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
    We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
    In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
    Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

  • Delta Replication for Customizing object from ECC- CRM

    I need help on delta replication activate for customizing objects from ECC to CRM.  I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL.  What business transaction do I need for those so the delta will work for them too?  Rewards points if helpful

    I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

  • Replication of functional location and equipment from ECC to CRM.

    Hi Guys
    I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

    As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
    In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
    -     Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
    Bye,
    sekhar.

  • Replication of Plant data from ECC to CRM

    Hello Experts,
    Kindly require your assistance in the following requirement:
    I have replicated the quotes from ECC to CRM.  However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
    I have followed the Note 493947 but in vain.
    Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
    Kindly request your guidance on this.
    Regards,
    Venkat.

    Hi Venkat,
    'Delivery Plant' field doesn't exist in CRM data model. Please refer to note  note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
    field doesn't exist in CRM.
    Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
    Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
    Best regards
    Christophe

  • Business partner replication from ECC to CRM

    Hello community!
    I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
    I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ECC, CRM, PI systems are registered in SLD.
    And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
    The thing that i cann't find:
    What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
    http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
    Thank you in advance, Dzmitry

    The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
    BR,
    Dzmitry

  • REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

    HI CRM Experts,
    I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
    I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
    Kindly let me know what am I missing out.
    Regards,
    Ravindra Valy

    Hi,
    I had applied the not earlier itself.
    Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
    After applying at ECC end, the problem is resolved.
    Thanks
    Ravindra Valy

  • Replication of Material Changes from ECC to CRM

    Hi All,
    I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
    So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
    Please can any one help me.

    Hi
    Do you get any sysfail in the inboud queue (and / or a dump in st22)?
    Do you get any errored bodcs?
    If yes which error message ID and Number?
    Best regards
    Christophe

  • Replication Z-Tables from ECC to CRM

    We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM,  anybody have any information about this.
    Thanks in advanced
    Sebas

    Hi Sebas,
    The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
    Replication of Z table from CRM to R/3 - No mBDoc Created
    You can also try this
    1. Create the Ztables both in ECC and CRM
    2. create customizing adapter objects in R3AC3.
    3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
    4. create a variant and shedule the based on requirement
    Thanks and regards,
    Madhukar Reddy

  • Equipment Replication from ECC to CRM 6.0

    Hi Gurus,
    I am trying to Replicate equipments from ECC to CRM 6.0
    I did all the activities as specified still encountering issue while replicating.
    I did following activities
    1) Default settings
    OLTP-EQ-0401-0401-X(Delta)
    2) BADI - CRM_EQUI_LOAD_STDIMP    (Activated)
    3) Specify adapter object for uploading objects
    0401 - DNL_EQUIPMENT
    I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
    A) I checked SMQ1, SMQ2 - No Queues are blocked.
    B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
    C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
    I checked the BDOC Message for the passed lines in SMW01 it says
    1) Start of Initial load.
    2) No Objects were selected.
    In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
    Please correct me if I am following a wrong process or forward me the check list for Equipment load.
    I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
    Please advice.
    Thanks,
    Sharath.

    Hi Sharath,
    I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
    I have done the following steps:
    1. Created a category for the object family 0401 and assigned the relevant set types to it.
    2 Maintained the settings for downloading equipments into CRM at:
    SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
    3. Activated BADI CRM_EQUI_LOAD
    On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it.  When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
    Would appreciate if you could share how did you solve your problem.
    Thanks in advance for the help!

  • Downloading Pricing condition records for products from ECC to CRM

    Hi All,
         I have a requirement where i  need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
    Note: 1. The Products are already in the CRM system.
              2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
    Thanks & Regards,
    Shwetha.

    First of check and ensure that if the records are already downloaded. To do so,
    1) Log to ECC system and go to tcode V/06
    2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
    3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
    Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
    1) Log to CRM system and go to se16
    2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
    3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
    4) query the table with input parameters like Product or Sales Org. YOu should find the records.
    If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
    If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
    If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
    Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
    Hope this helps
    Regds,
    Raghu

  • Customer replication from ECC to CRM

    Hello everyone,
    I am having some difficulty replication a customer from ECC to CRM.
    In our environment, customers are generally created from CRM & then replicated to ECC.
    Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
    Since I am a SD Consultant, I was thinking of extending the customers in ECC.
    I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
    I cannot see any BDOC in SMW01 also.
    Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
    Do I have to check any additional objects which I need to check ?
    Or is it that no settings means nothing created in ECC would come over ?
    Can anyone guide me so as to understand why this is happening.
    Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
    Thanks
    Vin
    Edited by: vinit parkar on Aug 3, 2010 10:58 PM

    Hi,
    If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
    Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
    Cheers
    Binai

Maybe you are looking for