Replication issue between two APO systems

Hi,
I have two APO systems. I am trying to replicate the Forecast data from one system to the other. In the first system, I created the Export data source of the Forecast infocube. In the second system, I created a data target and used the extracted datasource from the first system as the info source. Now the issue is that the data is getting updated in the second system except for the one plant where the data is erroring out. When I look at the error, the data seems to have been offset by a character to the left. The error is happening to only this one particular plant. I checked up the plant information in both the systems and it looks alright. Any ideas why only one plant is affected?
Best Regards,
Jai

Please ignore this issue. I found out the data was bad. Unable to delete this question.
-jai

Similar Messages

Intra-company stock transfer between two ERP Systems without SAP APO

Hi,
I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
Does anyone have experience with this scenario?
Thanks & regards,
Oliver

Hi Jagdeep,
Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
Regards,
Oliver

Reconnecting to Custom Motion Templates between Two Editing Systems

I'm having an issue with "media offline" in my FCP timeline whenever customized Motion templates are used in projects that are often edited between two different systems.
I always start with a standard "motion" project file and save it in my current project folder as a "Master" for creating identical templates on both systems. Yet even though both systems have the same custom template directory and the same template names, the FCP timeline always reports "Media Offline" whenever I try to work remotely on a project.
I'm wondering if it might somehow be possible to correct this issue so that my lower third overlay templates can exist on two different systems?
Thanks!

Sorry, I kind of thought my choice of words might be misunderstood. What I meant was that I always keep the original motion file that I initially created the template from in my current project folder. I am then able to open that original motion project file on the remote system and "save as template", so that (theoretically) I would end up with two identical templates (one on each system) located in the "user>library>application support>final cut studio>motion>template" directory.
I think I must have a tiny little error (or type-o) in the naming of either my template of the custom template folder. I'll have to go in and double check now that I have the correct path. (I was having a really hard time locating the "actual files" of my custom templates.
Thanks very much for your help!

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

SMTP Namespace Sharing between two mail system

I have used two mail server (Exchange 2013 and Linux sendmail) for mailing in the same domain like abc.com.
I have converted authoritative domain in to internal relay for sending mail in Linux mail user, and create a send connector point to Linux mail system as a smart host. in that case my exchange user send mail to Linux user and internet via Linux smart host,
then I create a receive connector in exchange server for receiving mail from Linux mail system as edge transport custom connector & permission set to anonymous, when Linux user send mail to my exchange user it queued in my exchange message queue and
the error is:
Last Error:A local loop was detected.
What's the problem?

Hi rana78,
As Nathan mentioned, please create Contacts.
Detailed information:
So to avoid NDRs when using shared SMTP namespace you will need to either disable recipient filtering, configure the product to do LDAP queries against all directories that share the namespace, or create Contacts.
More details to see:
How to Share an Email Domain Between Two Mail Systems
http://exchangeserverpro.com/how-to-share-an-email-domain-between-two-mail-systems/
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

IDOC -IDOC BETWEEN TWO XI SYSTEM

Hi iam Doing a scenario,
where i need to post an idoc from one system to another that travells through 2 xi system..
The Scenario is like this:
ISU --> XI1 > XI2> isu2
while doing this i used XI adapter between the Xi system.
And i am getting an error as Loop in Message Control in the MONI.
Please Do the Need Full Its urgent....
DId Any One Tried For this Type Of Scenario.. Please LET Me Know..
ITS URGENT
Thanks
Praveen
Edited by: pravin kk on Feb 20, 2008 6:38 PM
Edited by: pravin kk on Feb 21, 2008 12:53 PM

Hi,
The communication via web service may have advantages, if you want communicate with non XI systems.
In your scenario, there is direct communication between XI engines, so you can go for XI adapter. The XI adapter which is normally used to configure the exchange of messages with in an Integration Server, canbe extended to exchange messages between the two Integration Servers in the scenario.
Please verify if if you have the common SLD for both XI systems. its preferable to go for seperate SLDs
Check out the similar threads, XI to XI scenarios:
Re: XI -> XI scenario
Re: XI to XI connectivity
connection XI to XI
Re: XI to XI connectivity
These links will definitely give you an idea about the current situation.
Thanks
Swarup

Client Copy between Two Different Systems

Hi!!
Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
Thanks and Regards,
Vishwa.

Hi,
Save the contents that need to be copied in a Transport request at source client.
Now at the target client system,
execute transaction 'SCC1' and give the TR number and execute it.
The changes from the source client system this way will get copied to destination client system.
Reward if useful!
Thanks,
KalpanaR

Replication issue between lync 2010 FE and lync 2013 FE

Hello
I face any issue in my lync server's .
I was in the last steps in the migration process from lync 2010 to 2013 enterprise edition .
where CMS was moved already to 2013 , and later on many time I checked the replication and it was fine , then I deleted the CMS DB FROM 2010 FE and I checked the replication and it was fine .
later on I proceed to delete the archiving server and monitoring server and it was fine .
later on I proceed to
Reset call admission control
Prevent sessions for services
Stop Lync Server 2010 services
Remove a Front End Server from a pool
I just I face this replication issue after I start the process to delete the lync 2010 pool which im stuck on it now .
one more thing while I was trying to delete the 2010 front end pool , I got the error .
Error: An error occurred: "System.InvalidOperationException" "Cannot publish topology changes. Conference directories still exist on a pool that would be deleted. Remove the conference directories before continuing."
so I moved the conference directories from 2010 pool to the 2013 pool successfully.
but later on when I check the replication I notice the replication issue ?
Get-CsManagementStoreReplicationStatus
UpToDate           : False         """""""""""""""""""it is already shutdown
ReplicaFqdn        : HQ-EDGE01.mydom
LastStatusReport   :
LastUpdateCreation : 3/23/2015 11:22:17 AM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydom
LastStatusReport   : 3/19/2015 5:21:27 PM
LastUpdateCreation : 3/19/2015 5:21:25 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydom
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 11:52:17 AM
ProductVersion     : 4.0.7577.0
then I run the
I run Invoke-CsManagementStoreReplication
Get-CsManagementStoreReplicationStatus
UpToDate           : False     """""""""""""""""""it is already shutdown """"""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 4.0.7577.0
====================
Get-CsManagementStoreReplicationStatus
UpToDate           : False """"""""""""""" it is already down """""""""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     : 4.0.7577.0
why LastUpdateCreation : 3/23/2015 10:53:23 PM from the lync 2010 pool ????
I'm not doing any change on 2010 pool now (I just try to delete it ) , all the change it is on 2013 pool .
for edge server 2013 I shut down the server since there is another configuration issue there (so replication to edge server not the issue now since it is down).
my question is this will affect my lync 2013 since it is the production now ? is this un completed steps for removing the 2010 pool affect my production.
is the replication issue affects my 2013 pool ?
Kind Regards
MK

Hi,
From your description above, did you mean before deleting the Lync Server 2010 Pool from topology, you found the replication of Lync 2010 FE Server not update to date?
If it is the case, based on my knowledge, there is no affect for Lync Server 2013 Pool. Please double check if Lync Server 2013 Pool work normally, and Lync users in Lync 2013 Pool can use all Lync function without issues. Then you can delete Lync 2010 Pool
from Topology and publish it. After finish it, please re-run step 2 on Lync Server 2013 FE Servers.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Mirror virtual machines between two nas systems

Hello everyone,
I have an esx3.5 server and the vm's are stored in a thecus n5200pro nas using iSCSI. the synchronization module installed in the nas doesn't support iSCSI so I'm trying to find a solution to my problem.
Basically what I need is to mirror the first nas on the second so if the first one fails, I can just change the backup nas ip address and get things working again.
The only solution I found so far (which I'm currently testing) is using win2k3. I installed the ms iscsi initiator and created a mirror between the volumes of the two nas systems. It's currently synchronizing so I don't know if this will work yet.
My question is if there is a better way to handle this job without having to buy additional software. if not, is my current setup going to work?
guido

Hi Pranay,
>>There is a storage server which is added on both the host under as ISCSI array option :-
Do you mean the two hosts are connecting same ISCSI target of the storage server ?
Based on my understanding , shared storage is used for cluster .
Could you please tell us where the VMs is stored ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

RDP resolution and scaling level issues between two Win8.1 systems

I'm trying to follow along with this blog post that describes RDB 8.1 resolution and scaling level updates:
http://blogs.msdn.com/b/rds/archive/2013/12/16/resolution-and-scaling-level-updates-in-rdp-8-1.aspx
I'm connecting from one Win8.1 Pro system to another and the scaling level control on the Display control panel, I'm getting an error message that says "The
display settings can't be changed from a remote session". Both copies of Win8.1 are Pro editions and have had all updates installed.
Shouldn't my install mean I've got RDB 8.1 with the latest video drivers and that I should
be able to make these changes? Thanks.

Hi Chris,
To verify, if you open a dialog on the remote system, for example, System Properties, and open the same locally and place them side by side, are they the same size, fonts, etc?
I need to do some testing to verify that auto scaling is not limited to Enterprise SKU. If we do not get it solved in the next day or so then I may want you to do a screen share and show me what is happening so that I can investigate further.
-TP

Delta issues between two DSO's

This issue has been a recurrent one over past years, so maybe someone can explain me what is happening here:
The case is always the same, i.e. I try to load a delta from one DSO into another one. Let's call them DSO1, and DSO2. More in detail, the case is as follows:
1. I get an error when loading DSO1 to DSO2, due to some characteritic value's checks that I have implemented in a start routine.
2. I delete the red request from DSO2, and manually delete the wrong entryfrom DSO1.
3. I reload (full) the deleted records into DSO1, with the corrected values. At the end I check that my data into DSO1 is correct, and that the wrong record has gone.
4. I then reload a delta from DSO1 into DSO2, but I still get the same wrong record transferred, even if the record does not exist anymore in DSO1 !!
My guess is therefore that the data for deltas is fully saved in separate tables, instead of being compared at runtime. Does anyone know if my assumption is correct...If yes, how can I find this table? Is there anything I can do to solve this issue?

The error is not very important...I have implemented a check so that a field is never transferred empty. The field is not empty anymore in the source DSO, but it still exists in the change log table...Can I do something about it?
With other words: Can I force the change log to be recreated as the difference between my two DSO's, instead as a package of changed records...?
Edited by: TTBBRR on Mar 22, 2010 1:43 PM

Routing issue between two satellites sites and one central hub

Hi,
I have 3 Ad sites with one exchange 2010 hub,cas,mailbox server on each sites.
One of this site (site A) is central Hub and the two other sites ( B and C) are two satellites of site A.
The is no connectivity between site B and C, only connectivity between A and B, and A and C.
When I send a mail from Site B to Site C, Exchange try to deliver the mail directly to site C and don't pass to site A to deliver to site C, some mail stay in queue in site B, and the the queue is in retry.
I flag the site A as HUB.
Site toplogy is correct and the cost too.
Can someone help me??
Thanks

what are your AD costs between A, B and C?
In Exchange 2010, each message recipient is always associated with only one Active Directory site, and there is only one least cost routing
from the source Active Directory site to the destination Active Directory site
If the least-cost routing path to the primary site contains any hub sites, the message must be
routed through the hub sites

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Sharer folder issue between two directly connected PC

Dear All, I have an issue regarding folder sharing. need your help to resolve this. the scenario is
two PC's are connected directly to share a folder, to open *.mdb file of a accounting software. this problem start when I moved windows XP PC's and installed windows 7 64 bit PC's. there is no compatibility issue as I run the same software on other
locations
PC A (192.168.1.200) has that *.mdb file and PC B (192.168.1.100) has to open this file through a network.
when I configured the folder share and network setting, all done well and PC B can connect with PC A and that software work well. After two days, when we start the software at PC B, its not responding when it try's to open that database file.
while analyzing, I found out that PC B can open the share folder of PC A but when open the desired database folder explore starts not responding and need to quit it by force. I also tried to share another folder of PC A but results are same.
PC A run the software with out any problem.
It seems like network issue, so I check the cable with cable tester, found it good, than I check the connectivity by ping command, it giving me <1ms time. but still change the connectors.
the hard part is that, this share folder issue arises 3-4 days a week and 2-3 days it works well, and this is happening from last 28 days. I mean, one day we start the the PC B and use the software via network, the next day we start the PC B and we don't
able to use the software,..strange.
I also change the cable connection from cross to straight as both new PC's have gigabit Ethernet but results are same.
I already contact with software company, as per them its network issue as we can use the software on local PC (PC A) and there is no error messages popup.
please help me out in this regard.
Thanks Tanveer

Hi,
Firstly, we need to identify is this file sharing or netowrking problem. If you can access to the shared folder and modify its files which locate at PC B through PC A, it indicates file sharing works with no problem.
After that, we need to check if its networking or software itself problem when reading the .mdb file.
Put the .mdb file at PC A, then using the software open it for test. If no problem, we need to use Process Monitor to capture the access trace of the software process, we should be able to find some clues.
You can access to the link below to download Process Monitor:
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to capture a Process Monitor trace:
http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
Learning Example:
Using Process Monitor to Troubleshoot and Find Registry Hacks:
http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Roger Lu
TechNet Community Support

Is it possible to overcome synch/pitch issues between two groups of tracks

I have a few songs which were originally recorded as a group of rhythm tracks on tape which were subsequently re-mixed to stereo and brought back to have more tracks (vocals, solos, etc.) added.
Now I have them in digital format, loaded to Logic Express 8. Each song has the original 8 tracks, all synched together, plus the other group comprised of the stereo mix on the original 8 plus 6 added tracks. The tracks in this other group are synched together BUT they are not synched with the original group AND there may be an ever-so-slight pitch variance between the two groups.
Can this be resolved without any re-recording?

No, restoring from backup is all or none, You can't select what specific items to restore

Replication issue between two APO systems

Similar Messages

Maybe you are looking for