Replication issue Windows 2008 (not R2) FrsEvent error ?
I've had a few netlogon share issues but with help from this forum they've all gone away.
When I use the event log to look at administrative events all 3 give the same error "Access is denied" to the File replication service.
DCdiag /e gives the following errors ?
It looks like I''m actually down to just this error but its similar on all 3 Domain Controllers ?
PDC (ch-dc1-2k8)
Starting test: frsevent
There are warning or error events within the last 24 hours after the SYSVOL has been shared.
Failing SYSVOL replication problems may cause Group Policy problems.
DC2 (ch-dc2-2k8)
Starting test: FrsEvent
The event log File Replication Service on server ch-dc1-2k8.companyname.local could not be queried, error 0x5 "Win32 Error 5"
......................... CH-DC1-2K8 failed
DC3 (na-dc2-2k8)
Starting test: FrsEvent
The event log File Replication Service on server ch-dc1-2k8.companyname.local could not be queried,
error 0x5 "Win32 Error 5" ......................... CH-DC1-2K8 failed
Any ideas ?
Also I've put a test file into the scripts folder and it has NOT replicated ?
Testing server: Cardiff\CH-DC2-2K8
Starting test: Replications
* Replications Check
CN=Schema,CN=Configuration,DC=companyname,DC=local has 7 cursors.
CN=Configuration,DC=companyname,DC=local has 7 cursors.
DC=companyname,DC=local has 7 cursors.
* Replication Latency Check
CN=Schema,CN=Configuration,DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
Site Settings = CN=NTDS Site Settings,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
[0x904de,v=62142,t=2015-04-23 09:16:18,g=a1d47848-fb4f-497b-a8a2-f11d40b71481,orig=20719256,local=20719256]
Elapsed time (sec) = 2264
Site Settings = CN=NTDS Site Settings,CN=Edinburgh,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=Edinburgh,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
Site Settings = CN=NTDS Site Settings,CN=London,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=London,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
Site Settings = CN=NTDS Site Settings,CN=Belfast,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=Belfast,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
......................... CH-DC2-2K8 passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CH-DC2-2K8 passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... CH-DC2-2K8 passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC CH-DC2-2K8.
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=companyname,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=companyname,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=companyname,DC=local
(Domain,Version 2)
......................... CH-DC2-2K8 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\CH-DC2-2K8\netlogon
Verified share \\CH-DC2-2K8\sysvol
......................... CH-DC2-2K8 passed test NetLogons
Starting test: Advertising
The DC CH-DC2-2K8 is advertising itself as a DC and having a DS.
The DC CH-DC2-2K8 is advertising as an LDAP server
The DC CH-DC2-2K8 is advertising as having a writeable directory
The DC CH-DC2-2K8 is advertising as a Key Distribution Center
The DC CH-DC2-2K8 is advertising as a time server
The DS CH-DC2-2K8 is advertising as a GC.
......................... CH-DC2-2K8 passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
......................... CH-DC2-2K8 passed test KnowsOfRoleHolders
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=companyname,DC=local
* Available RID Pool for the Domain is 12100 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
* ch-dc1-2k8.companyname.local is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=CH-DC2-2K8,OU=Domain Controllers,DC=companyname,DC=local
* rIDAllocationPool is 11100 to 11599
* rIDPreviousAllocationPool is 9100 to 9599
* rIDNextRID: 9425
......................... CH-DC2-2K8 passed test RidManager
Starting test: MachineAccount
Checking machine account for DC CH-DC2-2K8 on DC CH-DC2-2K8.
* SPN found :LDAP/ch-dc2-2k8.companyname.local/companyname.local
* SPN found :LDAP/ch-dc2-2k8.companyname.local
* SPN found :LDAP/CH-DC2-2K8
* SPN found :LDAP/ch-dc2-2k8.companyname.local/companyname
* SPN found :LDAP/abb03237-e91b-457f-ab16-788d5dc3930e._msdcs.companyname.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/abb03237-e91b-457f-ab16-788d5dc3930e/companyname.local
* SPN found :HOST/ch-dc2-2k8.companyname.local/companyname.local
* SPN found :HOST/ch-dc2-2k8.companyname.local
* SPN found :HOST/CH-DC2-2K8
* SPN found :HOST/ch-dc2-2k8.companyname.local/companyname
* SPN found :GC/ch-dc2-2k8.companyname.local/companyname.local
......................... CH-DC2-2K8 passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... CH-DC2-2K8 passed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... CH-DC2-2K8 passed test OutboundSecureChannels
Starting test: ObjectsReplicated
CH-DC2-2K8 is in domain DC=companyname,DC=local
Checking for CN=CH-DC2-2K8,OU=Domain Controllers,DC=companyname,DC=local in domain DC=companyname,DC=local on 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=CH-DC2-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local in domain CN=Configuration,DC=companyname,DC=local on 3 servers
Object is up-to-date on all servers.
......................... CH-DC2-2K8 passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... CH-DC2-2K8 passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
An Warning Event occured. EventID: 0x800034C4
Time Generated: 04/22/2015 14:53:29
Event String: The File Replication Service is having trouble
enabling replication from CH-DC1-2K8 to
CH-DC2-2K8 for c:\windows\sysvol\domain using the
DNS name ch-dc1-2k8.companyname.local. FRS
will keep retrying.
Following are some of the reasons you would see
this warning.
[1] FRS can not correctly resolve the DNS name
ch-dc1-2k8.companyname.local from this
computer.
[2] FRS is not running on
ch-dc1-2k8.companyname.local.
[3] The topology information in the Active
Directory Domain Services for this replica has
not yet replicated to all the Domain Controllers.
This event log message will appear once per
connection, After the problem is fixed you will
see another event log message indicating that the
connection has been established.
An Warning Event occured. EventID: 0x800034C4
Time Generated: 04/22/2015 14:53:29
Event String: The File Replication Service is having trouble
enabling replication from NA-DC1-2K8 to
CH-DC2-2K8 for c:\windows\sysvol\domain using the
DNS name na-dc1-2k8.companyname.local. FRS
will keep retrying.
Following are some of the reasons you would see
this warning.
[1] FRS can not correctly resolve the DNS name
na-dc1-2k8.companyname.local from this
computer.
[2] FRS is not running on
na-dc1-2k8.companyname.local.
[3] The topology information in the Active
Directory Domain Services for this replica has
not yet replicated to all the Domain Controllers.
This event log message will appear once per
connection, After the problem is fixed you will
see another event log message indicating that the
connection has been established.
......................... CH-DC2-2K8 failed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... CH-DC2-2K8 passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0x40000004
Time Generated: 04/23/2015 09:30:54
Event String: The Kerberos client received a
KRB_AP_ERR_MODIFIED error from the server
Administrator. The target name used was
companyname\CH-DC1-2K8$. This indicates that
the target server failed to decrypt the ticket
provided by the client. This can occur when the
target server principal name (SPN) is registered
on an account other than the account the target
service is using. Please ensure that the target
SPN is registered on, and only registered on, the
account used by the server. This error can also
happen when the target service is using a
different password for the target service account
than what the Kerberos Key Distribution Center
(KDC) has for the target service account. Please
ensure that the service on the server and the KDC
are both updated to use the current password. If
the server name is not fully qualified, and the
target domain (companyname.LOCAL) is different
from the client domain (companyname.LOCAL),
check if there are identically named server
accounts in these two domains, or use the
fully-qualified name to identify the server.
An Error Event occured. EventID: 0x40000004
Time Generated: 04/23/2015 09:30:54
Event String: The Kerberos client received a
KRB_AP_ERR_MODIFIED error from the server
Administrator. The target name used was
companyname\NA-DC1-2K8$. This indicates that
the target server failed to decrypt the ticket
provided by the client. This can occur when the
target server principal name (SPN) is registered
on an account other than the account the target
service is using. Please ensure that the target
SPN is registered on, and only registered on, the
account used by the server. This error can also
happen when the target service is using a
different password for the target service account
than what the Kerberos Key Distribution Center
(KDC) has for the target service account. Please
ensure that the service on the server and the KDC
are both updated to use the current password. If
the server name is not fully qualified, and the
target domain (companyname.LOCAL) is different
from the client domain (companyname.LOCAL),
check if there are identically named server
accounts in these two domains, or use the
fully-qualified name to identify the server.
......................... CH-DC2-2K8 failed test systemlog
Starting test: VerifyReplicas
......................... CH-DC2-2K8 passed test VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=CH-DC2-2K8,OU=Domain Controllers,DC=companyname,DC=local and
backlink on
CN=CH-DC2-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=CH-DC2-2K8,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=companyname,DC=local
and backlink on
CN=CH-DC2-2K8,OU=Domain Controllers,DC=companyname,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=CH-DC2-2K8,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=companyname,DC=local
and backlink on
CN=NTDS Settings,CN=CH-DC2-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
are correct.
......................... CH-DC2-2K8 passed test VerifyReferences
Starting test: VerifyEnterpriseReferences
......................... CH-DC2-2K8 passed test VerifyEnterpriseReferences
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC CH-DC1-2K8 for domain companyname.local in site Cardiff
Checking machine account for DC CH-DC2-2K8 on DC CH-DC1-2K8.
* SPN found :LDAP/ch-dc2-2k8.companyname.local/companyname.local
* SPN found :LDAP/ch-dc2-2k8.companyname.local
* SPN found :LDAP/CH-DC2-2K8
* SPN found :LDAP/ch-dc2-2k8.companyname.local/companyname
* SPN found :LDAP/abb03237-e91b-457f-ab16-788d5dc3930e._msdcs.companyname.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/abb03237-e91b-457f-ab16-788d5dc3930e/companyname.local
* SPN found :HOST/ch-dc2-2k8.companyname.local/companyname.local
* SPN found :HOST/ch-dc2-2k8.companyname.local
* SPN found :HOST/CH-DC2-2K8
* SPN found :HOST/ch-dc2-2k8.companyname.local/companyname
* SPN found :GC/ch-dc2-2k8.companyname.local/companyname.local
Checking for CN=CH-DC2-2K8,OU=Domain Controllers,DC=companyname,DC=local in domain DC=companyname,DC=local on 2 servers
Object is up-to-date on all servers.
[CH-DC2-2K8] No security related replication errors were found on this DC! To target the connection to a specific source DC use /ReplSource:<DC>.
......................... CH-DC2-2K8 passed test CheckSecurityError
Testing server: Cardiff\NA-DC1-2K8
Starting test: Replications
* Replications Check
CN=Schema,CN=Configuration,DC=companyname,DC=local has 7 cursors.
CN=Configuration,DC=companyname,DC=local has 7 cursors.
DC=companyname,DC=local has 7 cursors.
* Replication Latency Check
CN=Schema,CN=Configuration,DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=companyname,DC=local
Latency information for 4 entries in the vector were ignored.
4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
Site Settings = CN=NTDS Site Settings,CN=Edinburgh,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=Edinburgh,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
Site Settings = CN=NTDS Site Settings,CN=London,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=London,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
Site Settings = CN=NTDS Site Settings,CN=Belfast,CN=Sites,CN=Configuration,DC=companyname,DC=local
Site
CN=NTDS Site Settings,CN=Belfast,CN=Sites,CN=Configuration,DC=companyname,DC=local
was skipped because it never had an ISTG running in it.
Site Settings = CN=NTDS Site Settings,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
[0x904de,v=62142,t=2015-04-23 09:16:18,g=a1d47848-fb4f-497b-a8a2-f11d40b71481,orig=20719256,local=5719216]
Elapsed time (sec) = 2265
......................... NA-DC1-2K8 passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... NA-DC1-2K8 passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=companyname,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... NA-DC1-2K8 passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC NA-DC1-2K8.
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=companyname,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=companyname,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=companyname,DC=local
(Domain,Version 2)
......................... NA-DC1-2K8 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\NA-DC1-2K8\netlogon
Verified share \\NA-DC1-2K8\sysvol
......................... NA-DC1-2K8 passed test NetLogons
Starting test: Advertising
The DC NA-DC1-2K8 is advertising itself as a DC and having a DS.
The DC NA-DC1-2K8 is advertising as an LDAP server
The DC NA-DC1-2K8 is advertising as having a writeable directory
The DC NA-DC1-2K8 is advertising as a Key Distribution Center
The DC NA-DC1-2K8 is advertising as a time server
The DS NA-DC1-2K8 is advertising as a GC.
......................... NA-DC1-2K8 passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Domain Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role PDC Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Rid Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
......................... NA-DC1-2K8 passed test KnowsOfRoleHolders
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=companyname,DC=local
* Available RID Pool for the Domain is 12100 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=CH-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local
* ch-dc1-2k8.companyname.local is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=NA-DC1-2K8,OU=Domain Controllers,DC=companyname,DC=local
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11670
......................... NA-DC1-2K8 passed test RidManager
Starting test: MachineAccount
Checking machine account for DC NA-DC1-2K8 on DC NA-DC1-2K8.
* SPN found :LDAP/na-dc1-2k8.companyname.local/companyname.local
* SPN found :LDAP/na-dc1-2k8.companyname.local
* SPN found :LDAP/NA-DC1-2K8
* SPN found :LDAP/na-dc1-2k8.companyname.local/companyname
* SPN found :LDAP/2961b38b-570f-4a35-908f-9818a8080c0d._msdcs.companyname.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/2961b38b-570f-4a35-908f-9818a8080c0d/companyname.local
* SPN found :HOST/na-dc1-2k8.companyname.local/companyname.local
* SPN found :HOST/na-dc1-2k8.companyname.local
* SPN found :HOST/NA-DC1-2K8
* SPN found :HOST/na-dc1-2k8.companyname.local/companyname
* SPN found :GC/na-dc1-2k8.companyname.local/companyname.local
......................... NA-DC1-2K8 passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... NA-DC1-2K8 passed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... NA-DC1-2K8 passed test OutboundSecureChannels
Starting test: ObjectsReplicated
NA-DC1-2K8 is in domain DC=companyname,DC=local
Checking for CN=NA-DC1-2K8,OU=Domain Controllers,DC=companyname,DC=local in domain DC=companyname,DC=local on 3 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=NA-DC1-2K8,CN=Servers,CN=Cardiff,CN=Sites,CN=Configuration,DC=companyname,DC=local in domain CN=Configuration,DC=companyname,DC=local on 3 servers
Object is up-to-date on all servers.
......................... NA-DC1-2K8 passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... NA-DC1-2K8 passed test frssysvol
Similar Messages
-
Oracle 11gR2 on Windows 2008 R2 - access denied error
I just installed 11gR2 on a Windows 2008 R2. When I tried to unsecure the dbconsole I noticed that an "Access is denied" error is returned, so I am not able to use the stop/start/unsecure command from emctl.
I am able to log in into the db and asm, but if I try to perform an imp/exp operation an create a log file from the operation I get an error EXP-00028: failed to open <log file name> for write.
I have already turned off the firewall, but the problem persists.
I know that Windows 2008 R2 has a lot of security enhancements that could cause issues, but I don't know what else I can turn off to deal with this situation.
BTW, I am logged with an account part of the Local Admins. and it belongs to the group ora_dba.
Thanks,
AlbertoThis may be a little late but did you run the command line using the Run As Administrator option? Windows 2008 will return that error when trying to do certain privileged operations under regular user rights.
-
My KMS server is running on Windows Server 2012 R2 and activated by Server 2012 KMS Key.
I would like to use the KMS server to activate many Windows 2008 R2 server, however, Error message "0xC004F050 The software licensing service reported that the product key is invalid" is appear when adding Windows Server 2008R2 KMS Key. The Windows
Server 2008 R2 KMS key is confirmed and validated by Microsoft Telephone service.
Command used:
slmgr /ipk <Windows Server 2008 R2 KMS Key>
Anyone can help? thanks.Hi Samson,
Based on my research, we need to choose associated KMS key based on the highest product being deployed in the product grouping hierarchy.
To choose the right Volume License key, please refer to this article:
How to Choose the Right Volume License Key for Windows
Please type the cmd "slmgr /dlv" on KMS Host and check if it has been activated successfully.
After configure KMS host, By default these KMS client computers will query DNS and locate your KMS host and activate
KMS Client Setup Keys
To reset computers to be KMS clients type the following at elevated command prompt:
Slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
Where xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is the generic VL key from the following link.
https://technet.microsoft.com/en-us/library/jj612867.aspx
For more detailed information to activate KMS client, please refer to the article below:
Installing KMS Hosts
Configuring KMS Clients
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
AD Replication issues, SYSVOL / NETLOGON not replicating
Hello Experts!
We have a client that recently called us for some assistance. The IT department had a new virtual environment stood up. They Created 3 new VMs and promoted them all to domain controllers. The current domain and forest functional levels are (and were) Server
2003. There were two existing domain controllers, both Server 2003. The new domain controllers are Server 2012 R2. After promoting the 3 new servers to DC’s, they demoted one of the old DC’s. Then they transferred FSMO roles to a new 2012 R2 DC. When they
went to demote the last server 2003 DC, it was giving them the error that it is the last DC in the domain. That’s when we were called to assist. I have since demoted 2 of the 3 new 2012 R2 DCs and transferred all FSMO roles back to the Server 2003 DC.
I have been running some tools to try and gather data. Here is the DCDIAG from the last Server 2003 DC:
C:\Documents and Settings\user>dcdiag /fix
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: domainname\server2003server
Starting test: Connectivity
......................... server2003server passed test Connectivity
Doing primary tests
Testing server: domainname\server2003server
Starting test: Replications
......................... server2003server passed test Replications
Starting test: NCSecDesc
......................... server2003server passed test NCSecDesc
Starting test: NetLogons
......................... server2003server passed test NetLogons
Starting test: Advertising
......................... server2003server passed test Advertising
Starting test: KnowsOfRoleHolders
......................... server2003server passed test KnowsOfRoleHolders
Starting test: RidManager
......................... server2003server passed test RidManager
Starting test: MachineAccount
......................... server2003server passed test MachineAccount
Starting test: Services
......................... server2003server passed test Services
Starting test: ObjectsReplicated
......................... server2003server passed test ObjectsReplicated
Starting test: frssysvol
......................... server2003server passed test frssysvol
Starting test: frsevent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... server2003server failed test frsevent
Starting test: kccevent
......................... server2003server passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x0000410B
Time Generated: 02/18/2015 19:27:04
Event String: The request for a new account-identifier pool
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 19:28:22
Event String: Component: System Information Agent
An Error Event occured. EventID: 0xC00110CD
Time Generated: 02/18/2015 19:28:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 19:28:22
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0xC0060024
Time Generated: 02/18/2015 19:28:34
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002720
Time Generated: 02/18/2015 19:32:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC25A001D
Time Generated: 02/18/2015 14:33:27
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:33:28
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:33:31
(Event String could not be retrieved)
An Error Event occured. EventID: 0x0000410B
Time Generated: 02/18/2015 14:36:18
Event String: The request for a new account-identifier pool
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 14:38:48
Event String: Component: System Information Agent
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 14:38:48
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0xC4350505
Time Generated: 02/18/2015 14:38:54
Event String: NIC Agent: Connectivity has been lost for the NIC
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:39:00
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:39:14
(Event String could not be retrieved)
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0xC25A001D
Time Generated: 02/18/2015 14:42:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:42:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:42:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 14:48:03
Event String: Component: System Information Agent
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 14:48:03
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x40000004
Time Generated: 02/18/2015 14:55:30
Event String: The kerberos client received a
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:36
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:39
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:08
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:08
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
......................... server2003server failed test systemlog
Starting test: VerifyReferences
Some objects relating to the DC server2003server have problems:
[1] Problem: Missing Expected Value
Base Object:
CN= server2003server,OU=Domain Controllers,DC=domainname,DC=com
Base Object Description: "DC Account Object"
Value Object Attribute Name: frsComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[1] Problem: Missing Expected Value
Base Object:
CN=NTDS Settings,CN= server2003server,CN=Servers,CN=domainname,CN=Sites,CN=C
onfiguration,DC=domainname,DC=com
Base Object Description: "DSA Object"
Value Object Attribute Name: serverReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
......................... server2003server failed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : domainname
Starting test: CrossRefValidation
......................... domainname passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... domainname passed test CheckSDRefDom
Running enterprise tests on : domainname.com
Starting test: Intersite
......................... domainname.com passed test Intersite
Starting test: FsmoCheck
......................... domainname.com passed test FsmoCheck
C:\Documents and Settings\user>
Now the DCDIAG for the Server 2012 R2 DC.
2012R2DC
PS C:\Users\user > dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = 2012R2DC
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: domainname\2012R2DC
Starting test: Connectivity
......................... 2012R2DC
passed test Connectivity
Doing primary tests
Testing server: domainname\2012R2DC
Starting test: Advertising
Warning: DsGetDcName returned information for \\server2003server.domainname.com, when we were trying to reach 2012R2DC.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... 2012R2DC
failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL
replication problems may cause Group Policy problems.
......................... 2012R2DC
passed test FrsEvent
Starting test: DFSREvent
......................... 2012R2DC passed test DFSREvent
Starting test: SysVolCheck
......................... 2012R2DC passed test SysVolCheck
Starting test: KccEvent
......................... 2012R2DC passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... 2012R2DC passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... 2012R2DC passed test MachineAccount
Starting test: NCSecDesc
......................... 2012R2DC passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\2012R2DC \netlogon)
[2012R2DC] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
......................... 2012R2DC failed test NetLogons
Starting test: ObjectsReplicated
......................... 2012R2DC passed test ObjectsReplicated
Starting test: Replications
[Replications Check, 2012R2DC] DsReplicaGetInfo(PENDING_OPS, NULL) failed, error 0x2105
"Replication access was denied."
......................... 2012R2DC failed test Replications
Starting test: RidManager
......................... 2012R2DC passed test RidManager
Starting test: Services
Could not open NTDS Service on 2012R2DC, error 0x5 "Access is denied."
......................... 2012R2DC failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 02/18/2015 14:39:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/18/2015 14:44:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x40000004
Time Generated: 02/18/2015 14:47:09
Event String:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cr-dc3$. The target name used was C
RDC02$. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when t
he target server principal name (SPN) is registered on an account other than the account the target service is using. En
sure that the target SPN is only registered on the account used by the server. This error can also happen if the target
service account password is different than what is configured on the Kerberos Key Distribution Center for that target se
rvice. Ensure that the service on the server and the KDC are both configured to use the same password. If the server nam
e is not fully qualified, and the target domain (domainname.COM) is different from the client domain (domainname.COM),
check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify
the server.
......................... 2012R2DC failed test SystemLog
Starting test: VerifyReferences
......................... 2012R2DC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : domainname
Starting test: CheckSDRefDom
......................... domainname passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domainname passed test CrossRefValidation
Running enterprise tests on : domainname.com
Starting test: LocatorCheck
......................... domainname.com passed test LocatorCheck
Starting test: Intersite
......................... domainname.com passed test Intersite
PS C:\Users\user>
From here I can see SYSVOL and NETLOGON are not replicating from server2003server. When I log on to server2003server and run ‘net share’ the SYSVOL and NETLOGON shares are shared. But, when I do the same on 2012R2DC there are no NETLOGON or SYSVOL shares.
I see ntfrs issues. So I ran ntfrsutl ds on server2003server and the results are here:
C:\Documents and Settings\user>ntfrsutl ds
NTFRS CONFIGURATION IN THE DS
SUBSTITUTE DCINFO FOR DC
FRS DomainControllerName: (null)
Computer Name : SERVER2003SERVER
Computer DNS Name : SERVER2003SERVER.domainname.com
BINDING TO THE DS:
ldap_connect : SERVER2003SERVER.domainname.com
DsBind : SERVER2003SERVER.domainname.com
NAMING CONTEXTS:
SitesDn : CN=Sites,cn=configuration,dc= domainname,dc=com
ServicesDn : CN=Services,cn=configuration,dc= domainname,dc=com
DefaultNcDn: DC= domainname,DC=com
ComputersDn: CN=Computers,DC= domainname,DC=com
DomainCtlDn: OU=Domain Controllers,DC= domainname,DC=com
Fqdn : CN= SERVER2003SERVER,OU=Domain Controllers,DC= domainname,DC=com
Searching : Fqdn
COMPUTER: SERVER2003SERVER
DN : cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : d3cfdf56-a013-40ab-a2e9ffc3d88896bd
UAC : 0x00082000
Server BL : CN= SERVER2003SERVER,CN=Servers,CN=domainname,CN=Sites,CN=Configuration,D
C= SERVER2003SERVER,DC=com
Settings : cn=ntds settings,cn= SERVER2003SERVER,cn=servers,cn= domainname,cn=sites,c
n=configuration,dc= domainname,dc=com
DNS Name : SERVER2003SERVER. domainname.com
WhenCreated : 5/29/2007 10:36:30 Eastern Standard Time Eastern Daylight Time
[300]
WhenChanged : 2/17/2015 11:21:58 Eastern Standard Time Eastern Daylight Time
[300]
SUBSCRIPTION: NTFRS SUBSCRIPTIONS
DN : cn=ntfrs subscriptions,cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : 5d0ca299-209d-4814-ae6d7acd9209e10a
Working : c:\windows\ntfrs
Actual Working: c:\windows\ntfrs
WhenCreated : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
ime [300]
WhenChanged : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
ime [300]
SUBSCRIBER: DOMAIN SYSTEM VOLUME (SYSVOL SHARE)
DN : cn=domain system volume (sysvol share),cn=ntfrs subscriptions,cn
= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : fb56d707-3c40-429f-bd7c63d227b9fb5d
Member Ref: (null)
Root : c:\windows\sysvol\domain
Stage : c:\windows\sysvol\staging\domain
WhenCreated : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
t Time [300]
WhenChanged : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
t Time [300]
SERVER2003SERVER IS NOT A MEMBER OF ANY SET!
C:\Documents and Settings\user>
Also worth noting that when we power down SERVER2003SERVER no computer can contact a logon server.
The last line of this worries me as well. I am going to continue to work on this but I wanted to get these logs to some other eyes in case you have some ideas off the bat. Thanks in advance!I would first recommend to make sure that the new DCs are also global catalogs and to refer to IP setting recommendations I shared here: http://www.ahmedmalek.com/web/fr/home.asp
It is possible to do a non-authoritative restore of SYSVOL to make it appear on the other DCs: https://support.microsoft.com/kb/290762?wa=wsignin1.0
However, you would need to upgrade to DFSR.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Windows 2008 r2 sp1 installation error 0x800f081f
I have two servers that are nearly identical running Windows 2008 R2. Both are Hyper-V hosts. I have applied SP1 to one of them, but am having problems getting SP1 to install on the 2nd one. The downloaded installation fails with 0x800f081f.
I have found
posts that refer to the Remote Server Administration Tools (RSAT) but since this is NOT Windows 7 and I have not installed the RSAT tools, I am at a loss.
I have also found
this thread that seems to be similar to my issue, except the O/S is Windows 7 instead of Windows 2008 R2.
I can see the failure in the CBS.log file, but don't know how to troubleshoot this problem.
2011-03-03 21:38:06, Info CBS Calling client to resolve source, cannot find file 'TsUsbGD.sys' at path: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys
2011-03-03 21:38:06, Error CBS Exec: Failed to pre-stage package: Package_for_KB976933~31bf3856ad364e35~amd64~cs-CZ~6.1.7601.17514, file: TsUsbGD.sys,
source: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info CBS Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info CSI 0000000e@2011/3/4:03:38:06.785 CSI Transaction @0x3316be0 destroyed
2011-03-03 21:38:06, Error CBS Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info CBS Perf: Stage chain complete.
2011-03-03 21:38:06, Info CBS Failed to stage execution chain. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Error CBS Failed to process Multi-phase execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info CBS WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x800f081f, failure source: Stage, start state: Staged, target state: Staged, client id: SP Coordinater Engine
2011-03-03 21:38:06, Info CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-03-03 21:38:07, Info CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-03-03 21:38:07, Info CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
I have also attempted an SP1 installation using Windows Update, but it fails, too.
I have installed the
System Update Readiness Tool with no change in the outcome.
I have run sfc /scannow with no effect.
Can anyone assist?
Thanks...RussHi,
I have exact the same problem.
After installing SP1 Windows 2008 R2 through windows update i can not start server manger..
System Update Readiness Tool
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-15 12:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Component Watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48 Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48 Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 387
Found 5 errors
CBS Watchlist Package Missing Total count: 1
CBS Watchlist Component Missing Total count: 4 -
I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CEIPEnabled>0</CEIPEnabled>
</component>
<component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CEIPEnabled>0</CEIPEnabled>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--<CopyProfile>true</CopyProfile>-->
<ComputerName>Win8</ComputerName>
<TimeZone>Pacific Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--<CopyProfile>true</CopyProfile>-->
<ComputerName>Win8</ComputerName>
<TimeZone>Pacific Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<!--<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Description>Disable UAC for Users</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA" /t REG_DWORD /d
0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>2</Order>
<Description>Disable UAC for Admin</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
/d 0 /f</Path>
</RunSynchronousCommand>-->
<RunSynchronousCommand wcm:action="add">
<Description>Enable Admin Account</Description>
<Order>3</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>powercfg -h off</Path>
<Order>4</Order>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>5</Order>
<Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<!--<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Description>Disable UAC for Users</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "EnableLUA" /t REG_DWORD /d
0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>2</Order>
<Description>Disable UAC for Admin</Description>
<Path>reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" /v "FilterAdministratorToken" /t REG_DWORD
/d 0 /f</Path>
</RunSynchronousCommand>-->
<RunSynchronousCommand wcm:action="add">
<Description>Enable Admin Account</Description>
<Order>3</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Path>powercfg -h off</Path>
<Order>4</Order>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Order>5</Order>
<Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<BlockPopups>yes</BlockPopups>
<CompanyName>FYM Inc</CompanyName>
<DisableAccelerators>true</DisableAccelerators>
<DisableDevTools>false</DisableDevTools>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<DisableOOBAccelerators>true</DisableOOBAccelerators>
<DisableWelcomePage>true</DisableWelcomePage>
<EnableLinksBar>false</EnableLinksBar>
<FavoritesDelete>true</FavoritesDelete>
<FilterLevel>High</FilterLevel>
<Help_Page>www.google.com</Help_Page>
<Home_Page>www.google.com</Home_Page>
<LockToolbars>false</LockToolbars>
<MSCompatibilityMode>false</MSCompatibilityMode>
<NoDial>true</NoDial>
<ShowCommandBar>true</ShowCommandBar>
<ShowInformationBar>true</ShowInformationBar>
<SuggestedSitesEnabled>false</SuggestedSitesEnabled>
<SearchScopes>
<Scope wcm:action="add">
<DisplayQuickPick>true</DisplayQuickPick>
<ScopeDefault>true</ScopeDefault>
<ScopeDisplayName>Google</ScopeDisplayName>
<ScopeKey>Search1</ScopeKey>
<ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
<ShowSearchSuggestions>true</ShowSearchSuggestions>
<ShowTopResult>true</ShowTopResult>
</Scope>
</SearchScopes>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<BlockPopups>yes</BlockPopups>
<CompanyName>FYM Inc</CompanyName>
<DisableAccelerators>true</DisableAccelerators>
<DisableDevTools>false</DisableDevTools>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
<DisableOOBAccelerators>true</DisableOOBAccelerators>
<DisableWelcomePage>true</DisableWelcomePage>
<EnableLinksBar>false</EnableLinksBar>
<FavoritesDelete>true</FavoritesDelete>
<FilterLevel>High</FilterLevel>
<Help_Page>www.google.com</Help_Page>
<Home_Page>www.google.com</Home_Page>
<LockToolbars>false</LockToolbars>
<MSCompatibilityMode>false</MSCompatibilityMode>
<NoDial>true</NoDial>
<ShowCommandBar>true</ShowCommandBar>
<ShowInformationBar>true</ShowInformationBar>
<SuggestedSitesEnabled>false</SuggestedSitesEnabled>
<SearchScopes>
<Scope wcm:action="add">
<DisplayQuickPick>true</DisplayQuickPick>
<ScopeDefault>true</ScopeDefault>
<ScopeDisplayName>Google</ScopeDisplayName>
<ScopeKey>Search1</ScopeKey>
<ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
<ShowSearchSuggestions>true</ShowSearchSuggestions>
<ShowTopResult>true</ShowTopResult>
</Scope>
</SearchScopes>
</component>
<component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fAllowFullControl>true</fAllowFullControl>
<fAllowToGetHelp>true</fAllowToGetHelp>
</component>
<component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<fAllowFullControl>true</fAllowFullControl>
<fAllowToGetHelp>true</fAllowToGetHelp>
</component>
<component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableWER>1</DisableWER>
</component>
<component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableWER>1</DisableWER>
</component>
<component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!-- High Performance -->
<PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
<!-- Power saver -->
<!-- <PreferredPlan>a1841308-3541-4fab-bc81-f71556f20b4a</PreferredPlan> -->
<!-- Balenced -->
<!-- <PreferredPlan>381b4222-f694-41f0-9685-ff5bb260df2e</PreferredPlan> -->
</component>
<component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
</component>
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<JoinWorkgroup>Workgroup</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Identification>
<JoinWorkgroup>Workgroup</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
</component>
<component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
</component>
</settings>
I'm thinking of dumping the entire IE section and see what happens.I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech -
Windows 2008 R2 SP1 failure Error 800F0818
We are trying to update ServicePack 1 on a Windows 2008 R2. The update is being executed with WSUS. We tried to download the package from internet and the problem is the same. Error 800F0818.
Here is the log of System Update Readiness Tool
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-07-29 16:30
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the
actual file name
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 310
Found 1 errors
CBS MUM Corrupt Total count: 1
Unavailable repair files:
servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum
servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.cat
(w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk CacheChecking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the
actual file name
Unavailable repair files:
servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum
servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.cat
So it seems like you need to fix this.
As a starting point, I would try simply re-installing the defective update:
KB2685813: Update for User-Mode Driver Framework version 1.11
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Oracle 10g instalation on windows 2008 64 bit getting error
Hi,
I am trying to install Oracle 10g database(10204_vista_w2k8_x64_production_db) ON windows 2008 release 2 sevice pack1. i am getting following errors.
please give me solution how to install.
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 3956MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\DHCPPrereq.dll already loaded in another classloader
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Checking the length of PATH environment variable...
Check complete. The overall result of this check is: Passed
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for location ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Actual Result: :java.lang.UnsatisfiedLinkError:Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\sidqueries.dll already loaded in another classloader
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: You must completely remove the ASM instance by removing the ASM service from the Service Control Manager, or you must configure it properly by ensuring that the ASM service is associated with a valid Oracle Home where ASM is configured.
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================10..2.0.4 not certified for Windows Server 2008 64bit, If you want install this software , you need to apply patch 10.2.0.5 patch
10.2.0.4 is on certified for windows Server 2008 32bit (x86), so you can install the software without apply patch but If you want to install windows 7 , you need to apply patch.
Read 4th steps
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html -
SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E
Dear Sir.,
Am installing sap ECC 6.0 on windows 2008 clustering with db2.
I got one error in the phase of Configure the database for mscs. The error is DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
DB2_INSTANCE=DB2PRD
DB2_LOGON_USERNAME=iil\db2prd
DB2_LOGON_PASSWORD=XXXX
CLUSTER_NAME=mscs
GROUP_NAME=DB2 PRD Group
DB2_NODE=0
IP_NAME = DB2 IP PRD
IP_ADDRESS=192.168.16.27
IP_SUBNET=255.255.0.0
IP_NETWORK=public
NETNAME_NAME=DB2 NetName PRD
NETNAME_VALUE=dbgrp
NETNAME_DEPENDENCY=DB2 IP PRD
DISK_NAME=Disk M::
TARGET_DRVMAP_DISK=Disk M
Best regards.,
please help me since am already running late with this installation to run the db2mscs utility to Create resource.
Best regards.,
Manjunath G
Edited by: Manjug77 on Oct 29, 2009 2:45 PMHello Manjunath.
This looks like a configuration problem.
Please check if IP_NETWORK is set to the name of your network adapter and
if your IP_ADDRESS and IP_SUBNET are set to the correct values.
Note:
- IP_ADDRESS is a new IP address that is not used by any machine in the network.
- IP_NETWORK is optional
If you still get the same error debug your db2mscs.exe-call:
See the answer from Adam Wilson:
Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.
Windows couldn't find the MSCS network called "public network". The
IP_NETWORK parameter must be set to an MSCS Network., so running the
Cluster Admin GUI and expanding the Cluster Configuration->Network to
view all MSCS networks that were available and if "public network" was
one of them.
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was used.
Best regards,
Hinnerk Gildhoff -
Windows 2008 backup failed with error code '2155348040'
Hello,
For the backup of our Windows 2008 servers, we use Windows Server backup. On one of the servers the backup will not run. In the application eventlog of the server there is the following message:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 2/16/2010 9:00:03 PM
Event ID: 546
Task Category: None
Level: Error
Keywords:
User: <user>
Computer: <computer>
Description:
Backup attempted at '2/16/2010 8:00:03 PM' failed to start, error code '2155348040'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
<EventID>546</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-02-16T20:00:03.559Z" />
<EventRecordID>33498</EventRecordID>
<Correlation />
<Execution ProcessID="4744" ThreadID="3516" />
<Channel>Application</Channel>
<Computer>...</Computer>
<Security UserID="S-1-5-21-3054417077-3708097399-2792259940-500" />
</System>
<EventData>
<Data Name="BackupTime">2010-02-16T20:00:03.559Z</Data>
<Data Name="ErrorCode">2155348040</Data>
<Data Name="ErrorMessage">%%2155348040</Data>
</EventData>
</Event>
Does anyone know how to solve this problem?
Best regards.
Wilfred van der HeijdenHello Wilfred,
thank you for bringing your concerns to us.
The error code 2155348040 indicates BLB_E_BACKUP_TARGET_SPACE_NOT_ENOUGH which happens if the target volume size is not
sufficient to create a backup. In your case the total used space of source volume(s) could be greater than the space on the target volume.
So please check the free and used space on the source volumes and retry the backup with the target volume space greater than that total
space. We recommend the target volume size to be 1.5 times of the total size of all the source volumes for scheduled backups so that you
can have sufficient number of backup versions stored.
If you are using Block Level Backup then one other possiblity could be that your source volume is fragmented causing the backup size to be
more than expected. If that is the case then retry the backup after defragmenting the source volume.
Thanks,
Bikash Agrawala [MSFT]
--------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights -
Windows can not find ' FILE ': error.
I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
Windows XP SP 2.
When I started it for the first time I checked all the file association check boxes.
If I double click on a .sql file the following windows error occurs:
Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
SQL Developer does startup. The error message is closed when the OK button is selected.
Any Ideas?
Regards;
RobertHi Robert,
Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
Regards
Sue -
Oracle 10g 64-bit database on Windows 2008 R2 (64-bit) error ?
- I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
- Now everything works fine locally on the database.
- I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
from this PC to the windows 2008 R2. It gives me an error
"Oracle SQL*PLUS has stopped working"
Problem Event Name: APPCRASH
Application Name: PLUS80.exe
Application Version: 0.0.0.0
Application Timestamp: 37f946a5
Fault Module Name: ORA805.dll
Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit )- I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
- Now everything works fine locally on the database.
- I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
from this PC to the windows 2008 R2. It gives me an error
"Oracle SQL*PLUS has stopped working"
Problem Event Name: APPCRASH
Application Name: PLUS80.exe
Application Version: 0.0.0.0
Application Timestamp: 37f946a5
Fault Module Name: ORA805.dll
Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit ) -
Itunes will no take the update. I tried to completly reinstall it still gave me errors. This application failed to start because MSVCR80.dll was not found. Error 126 please reinstall windows . I tried this and it still wont reinstall.
Entshuldigen aber mein Deutsch ist ganz schlect. was is 'datei'?
Ich habe 3 stunden mehr ausgaben mit Adobe Support . noch ein problem! Und er war uberhaupt ein dumbkopft.
Peter
Sent from my iPad Air -
Windows 2008 not shutting down Oracle
When I shutdown my Windows 2008 server that has Oracle 10.2.0.4, it does not shutdown the database like it should.
I have used Oracle Administration Assitant for Windows and I have set the Startup/Shutdown Configuration to "Shutdown instance when service is stopped" and that the Mode is "Shutdown Immediate".
In the oradim.log, I never see a shutdown command when I restart the server. I only see a shutdown command when I manually stop the service.
I've gone into the Registry and I have set ORA_<SID>SHUTDOWNTIMEOUT at 240, but I don't think that it even attempts the shutdown immediate much less waits 4 minutes for it to work.
I'm wondering of this is a bug in Oracle or Windows....JEDBA@Marathon wrote:
When I shutdown my Windows 2008 server that has Oracle 10.2.0.4, it does not shutdown the database like it should.
I have used Oracle Administration Assitant for Windows and I have set the Startup/Shutdown Configuration to "Shutdown instance when service is stopped" and that the Mode is "Shutdown Immediate".
In the oradim.log, I never see a shutdown command when I restart the server. I only see a shutdown command when I manually stop the service.
I've gone into the Registry and I have set ORA_<SID>SHUTDOWNTIMEOUT at 240, but I don't think that it even attempts the shutdown immediate much less waits 4 minutes for it to work.
I'm wondering of this is a bug in Oracle or Windows....I've never really looked at oradim.log, and since I don't have much on Windows any more ... but it sounds like you may be jumping to conclusions based on looking at the wrong log. What does the alert log say? Does it look like a clean shutdown? Is it having to perform crash recovery on startup? -
One of the SAN logical disk of windows 2008 not discovered as logical disk in SCOM 2007R2.
Hi,
Anyone can advise where should i check to make the discovery work. i have rename/restart the health service folder/scom agent on the problem windows 2008 server. it still cannot discover the logical disk which make the monitoring of logical disk not possible.Hi,
Microsoft introduced 'SAN Policy' in Win 2008 (Enterprise and Datacenter Edition only) which causes SAN disks to not be available on startup by default, as a protection mechanism. You have to use the Diskpart.exe utility to set the policy of the disks
on that server to make them come up after a restart.
More info on similar sort of thing here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
EJB3 MessageDriven not de-queueing the message
Hi, I've got a problem setting up a MessageDriven Bean (EJB3) on default JMS Queue in OC4J (10130). If I open up the enterprise manager, I can see that the bean has been deployed, I can see the Queue contains messages, but it seems like the messages
-
I extensively have tried to resolve the following issue via apple web site searches, two phone conversations with apple, and many, many varialbe of "self tests" to mini dv, idvd, quicktime, etc. Tired directly dragging photos into iMovie, different e
-
I have csv file which look like this Name1,12,Address,"10,121.00",zip1 Name2,13,Address,"11,150.00",zip2 But the problem here is when xi reads it using file adapter the amount field is taken as two parts even if i have mentioned in quotes "10,121.00"
-
Hi, Is there any way to get Apple TV Screen Mirroring API, so it can be used from application? I search over apple forums and haven't found any documentations. Thank you in advance, Dmitry
-
How Can I Get My Services To Work?
Hi, I cannot convert files (pdf to word, and I NEED to be able to edit the image/pdf, and re save as a doc.). It instructs me to constantly "sign in"... I just paid 89.99 and my picture is approved? I'm wondering how long will it take to be authorize