Replication never ends

Hello there,
We have iDS5.1 SP2 with hotfix2 on Solaris 8 and having 2 master and one consumer. one of the master replication status always says "incremental update started" but it never succeeded. At the same time the cpu utilization is also 40% constantly and it never comes below 35%.
Can someone please help me to find out what's going on.
Thanks
SSS

Hi, Lydia
Thank you for your reply. What do you mean that this is the "busy update on the publication". Could you please describe it in more details? Does it mean that on the publisher there was a huge update on a huge amount of rows? On the Publisher to
Distributor History I can see that there is no problem. All transactions are delivered without any delays (few seconds). But in Distributor to Subscriber History I have all actions completed in few seconds except the last one that hangs. How can I check if
it is the "busy update on the publication" problem? What should be done if it hangs more than few hours?
I found out that sp_MSget_repl_commands hangs on Publisher for remote Subscriber. It hangs with ASYNC_NETWORK_IO
Hi KirKuz,
I originally mean distribution agent reader &writer latency issue, and you can use SQL profiler or DMVs to examine in detail the Transaction Replication, which is described in this
blog.
Regarding to ASYNC_NETWORK_IO, based on my research, it's simply waiting for something external to SQL. The drive with your distribution database might be a bottleneck of such issue, or maybe the distribution tables are getting too large. Please check your
disk performance, also check your indexes on the replication tables for fragmentation.
Here is a similar thread for your reference.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d0117651-f94c-488a-83e8-30038e38d510/transactional-replication-slow-running-spmsgetreplcommands?forum=sqlreplication
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Similar Messages

AdamSync from AD to LDS goes into a continuous never ending loop... can't figure this out.

I THINK I've got this thing configured up to the point where it should be able to sync. The XML config is set to just grab a single OU with roughly 12 accounts in it.
Everything seems to connect OK, then it does a ton of "Processing Entry", even though there are only a few accounts in this OU.
Then it begins to do "Adding target object..." and gets stuck in a never ending loop.
Can someone point me in the right direction on how to troubleshoot this?
This is what the log looks like:
==========================
Adamsync.exe v1.0 (6)
Establishing connection to target server localhost:6389.
There is already an active sync session in progress.
Please allow the session to complete, or use -mai to seize the role.
Saving Configuration File on CN=Test,DC=domain,DC=org
Saved configuration file.
ADAMSync is querying for a writeable replica of 10.10.10.10.
Error: DCLocator call failed with error 1355. Attempting to bind directly to string.
Establishing connection to source server 10.10.10.10:389.
Using file .\dam9280.tmp as a store for deferred dn-references.
Populating the schema cache
Populating the well known objects cache
Starting synchronization run from dc=domain,dc=org.
Starting DirSync Search with object mode security.
Processing Entry: Page 1, Frame 1, Entry 0, Count 0, USN 0
Processing source entry <guid=94f6d930da2339439df75278a02accae>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 1, Frame 1, Entry 1, Count 1, USN 0
Processing source entry <guid=bf15bc4b684ece4f99010548e79decb0>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 1, Frame 1, Entry 2, Count 1, USN 0
Processing source entry <guid=fcea01637658134eab7ec74fe022d4fe>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 35, Count 1, USN 0
Processing source entry <guid=5e768f4392863b4d86935e6bf01acc25>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 36, Count 1, USN 0
Processing source entry <guid=b5d263a264aad045b8f42f19b49dd844>
Previous entry took 0 seconds (16, 0) to process
Processing Entry: Page 3, Frame 1, Entry 37, Count 1, USN 0
Processing source entry <guid=f19994051c804846b7bcbd066d9e9d40>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 38, Count 1, USN 0
Processing source entry <guid=b16cd765bafa4f4d8649d91f0f055e5f>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 1, Entry 39, Count 1, USN 0
Processing source entry <guid=6be6a7d551978445aafd3803e60dc560>
Processing in-scope entry 6be6a7d551978445aafd3803e60dc560.
Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: sourceobjectguid, instanceType, objectSid, sAMAccountName, lastagedchange, objectclass,
Adding target object CN=User Name,OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange,
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 2, Entry 0, Count 0, USN 53438354
Processing source entry <guid=bbb4a760a8281741a11d9331efaa3d7a>
Processing in-scope entry bbb4a760a8281741a11d9331efaa3d7a.
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org.
Adding attributes: objectClass, instanceType, sourceobjectguid, lastagedchange,
Adding target object OU=Staff Accounts,OU=Users,OU=ITS,CN=Test,dc=domain,dc=org. Requesting replication of parent.
Previous entry took 0 seconds (0, 0) to process
Processing Entry: Page 3, Frame 3, Entry 0, Count 0, USN 52660067
Processing source entry <guid=8d3ef319dff31f47819632af2da5df2c>
Previous entry took 0 seconds (0, 0) to process
===================================================

Hi,
Are there any error messages from the event log?
Here is a KB article which describes a similar issue below I suggest you refer to:
Error message when you use the Adamsync tool in Windows Server 2003: "Error: We seem to be in an infinite recursive loop"
http://support2.microsoft.com/kb/926933
Best Regards,
Amy

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Loading plsql_proxy.jar takes so long..never ends

Hello people,
I´m deploying a proxy cliente using command,
jpub -u SCOTT/SCOTT -sysuser SCOTT/SCOTT -proxywsdl=any_wsdl -endpoint=any
then the executing process stay in Load plsql_proxy.jar for a long time. it looks like never ends.
plsql_wrapper.sql
plsql_dropper.sql
plsql_grant.sql
plsql_revoke.sql
Executing plsql_dropper.sql
Executing plsql_wrapper.sql
loading sqlj/lib/dbwsclient.jar (about 5 minutes)...
Loading plsql_proxy.jar......................
the execution process looks like stopped at this here and doesn´t throw any exception.
I´ll be grateful the soon answer.
Rodius
anybody knows how long takes the proxy client generation process?

I have this issue also, with images from my D70 (~6 megapixels) ... no solution, except that when it happens, quitting and re-launching Aperture seems to clear it up for a while, at least until it happens again.
Given that you have almost twice the RAM and four times the CPU cores that I have, I suspect this is a software issue, and not one of insufficient hardware resources. :-)

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
It's stays in the "deleting" but I can't cancel it or close the window.
What can I do?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Initial Time Machine Backup never ends

Hi all folks,
I try to backup my PB12 Disc (120 GB) to a external 500 GB Disc, connected via FW400, but the backup never ends, I think.
The backup starts with 100MB/min but after 20h (80GB are store to a external Disc) it slow down to 1MB/min.
With the "Activity Monitor" I see only some disc activities and a "mds" and "mdworker" process use some cpu time only (more than 10%).
Where can I get some detail information, a log file, about the Time Machine activity from.
Thanks for any help,
Lutz

Hi all folks,
the initial Backup ends after 2 days (nice to to see, :-(),
but on the boot volume I can go the time walk only.
I split my disc into two partitions, sorry.
Bye, Lutz
p.s.
With CCC I spend 4-6 hours to back up my disks only (100GB).

Mappings never ends

Dear All,
We are using 10.2 version of OWB and we have around 80 mappings in one module daily we are running the mappings parallel through control center for the time consuming (manually). but one mapping still running normally it takes 1:30 to 2:00 hrs time to finish but some times it is taken almost 5 to 6 hrs some times it never end. at that situation we stopped the mapping.but while we check the target table data is coming perfect.
Let me know the cause of this and how to salve it.
Thanks,

Hi,
When you kill the mapping from the Control Center the DB session which was triggered by mapping won't kill , you may see the session still running from Session Browser or any other way. This may be the reason you see the data in the Target table. to test this you may start regular running mapping and kill it from CC and observe the session from Database and you may see the data in the target table too.
This may be one possibility. I am not saying what others say is wrong . I had experienced this issue before and i had to tune my code to get the mapping run consistent.
Suresh

My icalendar data is on a never ending importing how do I get it to stop?

My icalendar is on a never ending importing how do I get it to stop!

Items purchased in an account a permanently associated with that account. You cannot split accounts nor merge them. You can log in with your family account and download items that way. In the long run though, especially if you are using other Apple devices, you may encounter problems with authorization. You should look into making new purchases with your own ID.

Ipod boot never end...

Hi all,
I have a big prob with my ipod photo 40GB : I tried to use it in disk mode to backup my hard disk, and during the copy the ipod gave a unknow error. Since this the ipod start the boot (white apple on black background) and never end, the boot restart every 5-10 secondes... no ipod on dekstop so no way to reinstall it with ipod updater. I tried the 5R but it still the same... Please help !!!
Thanks in advance
Phil

I am experiencing the identical problem. I am hoping that if I drain the battery until it is completely dead it may force a "hard" reset which when charged again, it may start working properly.
Let me know if you find anything out.

Suddenly never ending pinwheel and slower than usual

My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !

Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it.

D10, boot problems, a never ending fan test!

I hate this noisy fan test!!! My dog always panics, if it is in the room! But that's not the problem.
If I switch on the external mains, the fan test starts and ends after some ten seconds.
If I push the switch at the front of the maschine, the fan test starts and - sometimes - never ends. In this case, the maschine - obviously - will not boot. What to do? - Repeat the procedure. Sometimes I need 10 or more attempts to boot the maschine.
Now I found (shortly before I decided to bring the maschine back to the dealer): The fan test succeeds nearly every time (and the maschine will boot), if I switch off all the external USB-devices (5 disks, WLAN-stick, memory stick, etc).
My questions:
what's going wrong with the fan test at my maschine?
is it possible to skip this crazy fan test?
Thanks for your help!
Lenovo PC Think Station D10 6427-H6G, Windows XP

regarding the fan test, this cannot be disabled.   thinkstations are designed for 24/7 uptime just like servers and the BIOS tests the fans at every boot/reboot.   since there isn't much reason to turn these systems off or put them asleep, the best workaround is to leave your D10 running 24/7 as it was designed to do.   mine only gets rebooted for windows updates, software updates, or video driver updates.   otherwise, it's up 24/7/365.
regarding the fans getting stuck, update your BIOS.   the latest version can be found here.
also, if you put your system to sleep, be sure to wake it with the power button and not your keyboard.   a few users have reported their fans getting stuck when waking with their keyboards.   i'm not aware of the issue happening when using the power button.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Sync never ends Error 4001

hello, i have the problem that my itunes match never ends the sync.
It runs always in a loop
Itunes is in german
I found a lot of solutions with the alt key, deactivate and activate Itunes Match and other, but nothing help.
have anyone a idea what i can do??
Udo

I ended up calling Apple, and they had me completely reformat the iPod. This seemed to fix the problem.

Sync never ends

I have a new 32mb Touch. I originally synced it while on vacation with PC #1, and it worked perfectly. Now I am home, and I have attempted to sync it with PC #2.
I tried several times to sync to PC #2, and each time it would successfully transfer all (or most) of my media, but the sync process would never end.
I am using iTunes 7.6.1.9, and my Touch is version 1.1.3 with Software Upgrade.
I even went so far as to do a total restore of the Touch, but this doesn't seem to fix the problem.
Any advice would be appreciated.

I ended up calling Apple, and they had me completely reformat the iPod. This seemed to fix the problem.

Scene never ends

hello,
my scene only contains 2 images.
the 1st: a layer with the script "stop;", and,on another, a
movie clip with the scrip:
onClipEvent(load){
Calculate approximate kbps after test swf loads
function getkbps(startTime,sizeInBytes) {
elapsedTimeMS = getTimer() - startTime; // time elapsed
since start loading swf
elapsedTime = elapsedTimeMS/1000; //convert to seconds
sizeInBits = sizeInBytes * 8; // convert Bytes to bits,
sizeInKBits = sizeInBits/1024; // convert bits to kbits
kbps = (sizeInKBits/elapsedTime) * 0.93 ; // IP packet
header overhead around 7%
return Math.floor(kbps); // return user friendly number
Load test.swf with a unique time to work around browser
caching.
Browser will always load a new copy of SWF because url is
different each time.
now = new Date(); // create date object
nocacheStr = "?" + now.getTime();
this.loadMovie("test.swf"/*+ nocacheStr*/);
onClipEvent(enterFrame){
// do not execute code until SWF begins to load
if(this._url != _root._url){
if(typeof start == "undefined") {start = getTimer();} // set
start time once
if(this.getBytesLoaded() < this.getBytesTotal()){ /* not
yet loaded*/}
if(this.getBytesLoaded() == this.getBytesTotal()){ // swf
loaded call getkbps()
_level0.bandwith = getkbps(start,this.getBytesTotal());
_root.gotoAndStop(2);
in th second image the only script is:
//Ouvre une connexion locale qui vous permet de lire les
fichiers vidéo (FLV) depuis une adresse HTTP ou depuis un
système de fichiers local.
// on crée l'objet de connexion (objet NetConnection)
maConnexion = new NetConnection();
// Connexion à la source de donnée
// quand il s'agit de charger une video externe sans utiliser
FlashComm
// il faut transmettre le paramètre null à la
méthode connect
//on se connecte
maConnexion.connect(null);
//on crée un objet NetStrean pour pouvoir utiliser les
méthodes et prpopriétés permettant de lire des
vidéos en local ou depuis une adressse http
// Création d'une occurence de l'objet NetStream
monFluxVideo = new NetStream(maConnexion);
// attachement du flux video à une occurence de l'objet
Video
ici.ecran.attachVideo(monFluxVideo);
//on définis le nombre d'images par secondes:
fps=12;
function essai(){
if (bandwith != Infinity) {
temps_chargement = (monFluxVideo.bytesTotal / bandwith) -
(monFluxVideo.bytesTotal/fps);
if (temps_chargement>=0){
monFluxVideo.setBufferTime(temps_chargement);
}else{
monFluxVideo.setBufferTime(20);
essai();
// lancement de la lecture
monFluxVideo.play("eveque_moins_oiseaux.flv");
//permet de lisser la video lorsqu'elle est
redimensionnée
monFluxVideo.smoothing;
//bouton play
bt_joue.onRelease = function() {
monFluxVideo.play("eveque_moins_oiseaux.flv");
//bouton pause
bt_pause.onRelease = function() {
monFluxVideo.pause();
//bouton stop
bt_stop.onRelease = function() {
monFluxVideo.pause();
monFluxVideo.seek(0);
//bouton avance
bt_avance.onRelease = function() {
monFluxVideo.seek(monFluxVideo.time+10);
//bouton recule
bt_recule.onRelease = function() {
monFluxVideo.seek(monFluxVideo.time+10);
//----son
//ici.ecran.attachAudio(monFluxVideo);
var monson = new Sound(ecran);
var i = 100;
moins.onPress = function() {
monson.setVolume(i -= 5);
son = i add " %";
plus.onPress = function() {
son = i add " %";
if (i>=100) {
i = 100;
} else {
monson.setVolume(i += 5);
//fonction de démarrage en fonction de ce qui est
chargé
//Spécifie la durée de la mise en mémoire
tampon des données avant le démarrage de l'affichage du
flux vidéo.
//monFluxVideo.setBufferTime(4000);
monFluxVideo.seek(info);
function verif() {
// info prend pour valeur la position dans le temps en
seconde (tete de lecture)
info = Math.round(monFluxVideo.time) add " sec";
setInterval(verif, 100);
function charg() {
pourcentage = "Chargement : " add
Math.round((monFluxVideo.bytesLoaded/monFluxVideo.bytesTotal)*100)
add " %";
setInterval(charg, 100);
When i play the scene the loop never ends. even with the
"gotoAndStop(2)"...
Please help me...

You should read up on Garage Band, I figured it out in 2 minutes and I don't really use that program.
You need to create a new software instrument and then use a midi keyboard or the software one provided. Hit record and hit your note, holding it down as long as you want.
Andy

Replication never ends

Similar Messages

Maybe you are looking for