Replication of account master with 2 diff number ranges to ECC.

HI All,
Wish you happy new Year....
I have a doubt in Master Data replicating from CRM to ECC.
Here is a situation where i have to create 2 number ranges with groupings in CRM for prospects and has to replicate to ECC SD. I heard that only one number range(ie Z1) can only be used to replicate to ECC and ( I.e. Z2) number range masters can not flow to ECC.so can you guys please tell me what are all the problems in replicating the master to ECC if i use 2 number ranges with groupings.
Thanks and Regards,
Arun

Hi Deepak,
Have you downloaded R/3 sales area(ie,. org + distribution Channel+division) to CRM? If you are not using standalone CRM scenario, then you have to maintain R/3 sales area in and then download it into CRM through customizing adapter object dnl_cust_s_area.
Then you have assign R/3 sales org to ur created organization in CRM and define distribution channel and division in the attribute tab of ppoma_crm.
Kindly check have u done all the above mentioned steps?
Thanks & Regards,
Anirban

Similar Messages

Account group with Internal Number Range

Hello Gurus,
With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
Please correct me if I am wrong and suggest a solution.
Thanks in Advance

Hello friends,
No error message but the next number is getting allocated.
in VD01 or XD01
the following steps r followed.
1. Enter the Account Group
2. Sales Area (New Sales Area for the customer)
3. Reference Customer.
4. Reference Sales Area.
Rather than going to the sales area directly, General area screens are appearing.
Upon saving saving the details New customer number is getting allocated.
I have no clue where I have gone wrong...
looking forward for suggestions.
Regards

Partner Function in Vendor Master With Internal Number Range

Hello Friends,
I am creating vendor master record with internal no range.I wanted following clarifications.
1.In partner function screen, I want to have same vendor no which i am creating to be assigned automatically to VN.OA PI and GS funtions at the time of its master creation.This is not happening in my case
2.Partner function like VN,OA,PI and GS does not appear automatically whereas i have to select it manually.
Regards
Vivek

Hi,
During defining the partner Schema, please follow the process:
a.Create partner Schema
b.After creation of partner Schema, select your partner Schema and click u201Cpartner roles in schemau201D and you will have next screen
Now for Partner function like VN,OA,PI and GS as you required and select the check box of mandatory
and save.
Now try creating Vendor and you will have Partner function like VN,OA,PI and GS in vendor master.
Note: The following configuration steps for Vendor master are:
1. Create Vendor Account Group.OBD3
2. Maintain Number Ranges from Vendor account Group:XKN1,
3.Assignment of Number ranges to Account Group,OBAS
4.Partner Function: SPRO->MM->Purcahsing->Partner Determination-> partner roles->Permissible partner role sper account group
5.Partner Schema:
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Define partner Schema
6.Assgin partner schema to accont Group
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Assgin partner schema to account Group
Regards,
Biju K

Create Equipment with same Number rang at Diff Equipment Catagory

Hallo Guys,
client bymistake created some equipments which are actually PRT with catagory M ( Machine)
now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
as that of made at machine, but as per std system is not allowing to create duplicate records.
How to achive this ?
Regards,
Rip

If no Equipments were created after the Deleted Equipments then you may have an option.
Tcode OIEN
Go to Number range interval, Then the Current number can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
Jogeswara Rao K

Create vendor in ERP R/3 with internal number range

HI,
When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
According to sap note 1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
Kind regards
Jonna

We have worked around these problems in the past. These are the steps we took:
1. We created a custom program to process a CREMDM IDOC. This custom program was pretty simple. It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ. The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
2. Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
3. The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM. This was necessary to update the vendor number in MDM.
Tom Belcher

Sd invoices posting with External number range

Hi,
i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number range?
while posting it is giving error like use internal number range.how to over come this.help me
Thanks
Prathima

Good Afternoon Prathima.
Use tcode OBA7
Look for Doc type RV Billing Doc trn.
This doc is generally used for posting Billing doc to accounting.
Here you would find Number range as external.
Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
Hope it solved your query. Kindly reward.
Take care. JP.

Having Two GR/IR account based on Vendor Number Ranges.

Dears,
Requirement of our client is to maintain Two GR/IR accounts based on Vendor number Ranges. I explained, as per standard functionality of SAP we can not have 2 GR/IR accounts based on vendor number ranges since system is checking the valuation class of Material but we can have 2 GR/IR accounts based on the Materials.
Please suggest me if there is any possiblity of having the above scenario so that I can add more points.
Thanks,
Omprakash

Hi Shahin,
You can do this using,
Material master QM view : Set the control for inspection lot creation as each material document,batch, storage location.
Inspection plan: Use the dynamic modification at characteristics level.
DMR: Create a DMR(lets say every 5 deliveries, assuming PO delivered in 5 delieveries) and assign it to each and every characteristics which you want to skip.
Please let me know whether it helps.
WR,
Sanjeev

Purchase Order (PO) Inbound with external number range

We need to create a interface for Purchase order Inbound.
The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
We have allowed PO with external number range.
I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
Points will be offered for useful informations.
Thanks,
Sivaraman

Hi Sivaraman,
could you tell me how you solved it. I have the
same problem and didn't find the solution yet.
Thanks a lot!
Horst

Customer Master data creation with customized number range

Dear all,
Can somebody know how to create the customized number range for customers like first 2 digits represents Sales organization and next 2 digit should represent circle,next 2 distribution chaneel and last 4 digits shold be the running number.
Looking for solution..
Thanks & Regards,
Murali.

Hi,
In your case you need to define as following
Step No: 01.
01.Sales Orgination with 0001 to 0099.
02.Regions with 00 to 99.
03.Distribustion Channel with 00 to 99
Step No:02.
Define PDP with the diffrent account groups defined for diffrent Sales Org, Regions & DC's.
Step : No: 03.
As per the above configs go to TCode for Number range for accounts groups in XDN1. Say Example as
XX--- From:1010100000 to: 1010109999. Note the possiable numbers are 0000 to 9999 only.
10 is sales Org, 10 is Region & 10 is DC's.
This is one of the way to do. The other way is to develo Z table and to use the user exit / new progarme to identify the requried number range with reference to Sales Org, Regions & DC's
Hope this is fine with your requrment.
Bye & enjoy SAP.
Koganti.

ECC 6.0 :Error with AFAB ( Number Range Assginment)

Dear All,
Please advise
We have upgrading from 4.7 to ECC 6.0
While running DEP AFAB, I get the following Error resulting
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2006 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Here for DEP posting we have maitianed number range as Externally and we are able to run in PRD but now after upgrade in DEV, it is giving the above Error.
regards,
sgs

Hi,
Upto version 4.7, you need to have the number range marked as 'external'.
In ECC 6.0, you need to have the version as 'internal'. You can change the number range from 'external' to 'internal' only when you change the status (current number) to zero. If it is year specific number range, any significant impact may not be there. Nevertheless, please follow the note 890976.
Cheers.
Dhananjai

Creation of HU in auto mode with external number range

Dear Experts,
         I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..

Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS                 Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER          Change Handling Unit Header Data
BAPI_HU_CREATE                 Create Handling Unit with Items
BAPI_HU_DELETE                 BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY        Displays HU History
BAPI_HU_GETLIST                Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG           Select Handling Unit Output
BAPI_HU_PACK                   BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG            HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT     Select and Process Handling-Unit Outputs
BAPI_HU_REPACK                 Repack HUs and HU Items
BAPI_HU_UNPACK                 BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY                 Display an HU in Dialog Mode
===================================

BPL / BC - ACCOUNTING DOCUMENT no actuallizing number ranges ?

Hi all
One question, is it correct that TDMS not update NRIV Table ?
Should i transport now the table with customer BPL or why isn't inside?
Has nobody FI User question about these ?
If yes what have you done ?
Thanks for Answers

Hi SAPERLE,
best practice is to set the corresponding number ranges to higher values (e.g. the values of the sender system). So you don't get conflicts with the new data from sender system.
Another way is copying the NRIV table with TDMS BPL. But then you're changing all the number ranges and this could cause problems in other applications.
BR,
Marc

Is it possible to create Order type with different number ranges-Plant wise

Hi Experts
Client wants to get the different number ranges for the order types created in the different plants. Is there any user exit for the same.
I have assigned the order type to the different plants. And Order type is assigned to a no range. So whenever a order type is created in different plants; order types uses the same number ranges.
so with this situation one cann't know the total no. of order created within a plant.
Is there any solution for the same.
Pease give your valuable solutions.
Regards
Pankaj

Hi
Best way is to create different order types for different plants.
like we have order types OR15 ,OR20 & OR30 for different plants 1500 ,2000 & 3000 .
you can assign different number range for different order type.
this is simplest solution.
Regards
Sujit

Root org. unit with External number range

Hi all,
I have a unique requirement.
We need to create a root org. unit. I used PP0CE to do the same. But it would generate org. unit numbers internally i.e. system generated.
We would like to assign an external number range to the root org. unit created.
In case I try to create it using PP01, we have to provide a relationship to other org. unit while creating root org. unit in PP01.
It would be great if someone can tell me the solution for this issue.
Regards,
Bharat

Hi Bharat,
You can maintain number range even for org units, as follows:
Here
01 - plan version
A, C, O, P etc are object types
after selecting the respective ie 01O IN Ex ,
now click on maintain number range where you can clearly specify the number range either internal or external.
Then u can start with TC PPOCE
Thanks
Sai

Bapi with external number range

i am using bapi_goodsmvt_create.i want to assign external number range.how it possible?

It depends on whether you have a service master or not.
1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
Makes sense?
A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

Replication of account master with 2 diff number ranges to ECC.

Similar Messages

Maybe you are looking for