Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Similar Messages

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Creating ERP Sales Order from CRM 7.0

Hi Experts,
We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
Do we need to download the entire product data from ECC via middleware to implement this functionality?
Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
Thanks and Regards,
Rohit

I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
Here a quick Guide -->
Prerequisites
You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
You are using SAP ERP for your Quotation and Order Management.
You are using SAP CRM.
You have assigned the relevant ERP sales transactions to a profile.
You do this in Customizing for CRM, by choosing Customer Relationship Management Transactions Settings for Sales Transactions Define Profile for ERP Sales Transactions .
You have defined an RFC destination.
You do this in Customizing for CRM, by choosing Customer Relationship Management CRM Middleware and Related Components Communication Setup Define RFC Destinations .
You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing Customer Relationship Management Business Roles Define Business Role .
You have defined cross-system copy control of transaction types.
You do this in Customizing for CRM, by choosing Transactions Settings for ERP Transactions Maintained via CRM Cross-System Copy Control for Opportunities and ERP Transactions
I want to see the screens or video regarding with this scenario.
Regards,
Memo

Mass sales orders from CRM to ECC

Hi,
We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
Could you please let me know if you know any kind of solution for this kind of scenario.
Thanks in advance!
Regards,
Kumar B.

Hi Maggie,
Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
Could you please let me know how to try this other please let me know the program or tcode.
Regards,
Kumar B

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
      I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
      When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute '     FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
   Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
<b>On R/3 system:</b>
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
<b>On CRM:</b>
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

Error when replicate sales order from crm to r3

Hello Guys,
When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01:
queue name: R3AD_SAL_ERR
error1:
Please enter sold-to party or ship-to party
Nº mensagem VP112
error2:
Sales document XXXX was not changed
Nº mensagem V4219
Any idea, why this happens?
Mary

Hello guys,
I have solved my problem by my own.
The problem was in the distribution of partner functions from crm to R3 (spro -> CRM->Basic Functions-> Partner processing->Data Transfer-> distribution of partner functions from crm to R3).
The partner functions assigned to sales orders in R3 was the AG, WE, RE and RG, and in the CRM was SP, SH, BP, PY, the partner functions map wasn't correct
I have had to map the correct partner functions between crm and r3. I have put in CRM the same partners functions that R3.
Best regards
Mary

No Purchase order and sales order from trading contact

Hi Gurus,
I am new to this module and i am trying to create a Trading contract. As I understand that the trading contract should create Purchase order and Sales order automatically. But in my case, this didn't happen.
In this regard, I want to know,
i. Are info records mandatory or mentioning the required purchasing and sales data during contract creation is sufficient.
ii. What are the configurations required to do for GTM functionality and which are the points should I check for this.
help me out.

HI
there are some status that is required to be set while you save a trading contract.
your trading contract must be approved or released..only then follow-on docs will be created.
regards,
Yadesh

Replication sales order from CRM to R/3?

Hi Gurus
I need some advice. We are implementing CRM for a over client
Over sale Cycle is LeadOpportunity- sales order- delivery  billing
Once sales order created in CRM we have to send that sales order to SAP R/3
Then delivery and Billing will do in R/3?
So what are the Middleware settings we have to do?
Please explain me in a clear format
Regards u2026
Rosie

Hello Rosie,
If given not so complex scenario, you may go like this:
1.make all the necessary settings the same in CRM and R/3, including sales transaction type, item category ....
2.transaction smoeac, under R/3 site, create subscription to "All Business Transactions (MESG)"
If you does not want all the business transaction flow to R/3, you may consider to create a simple intelligent replication object for business transaction, and limit the data transfer for TA only for example.
Hongyan

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

Sales Area determination in follow-up ERP Sales order from CRM opportunity

Hi Experts,
Iu2019ve configured everything needed for ERP sales Order to be created as follow-up from CRM opportunity.
sales area in CRM opportunity is correctly determined (but division is disabled)
Sales Org : 1000, Distribution Channel: 10 and Division : 01 (Division is not displayed in opportunity)
But when I created ERP sales order as follow-up document from opportunity, system checks for sales area 1000, 10, 00 (This sales area or Division u201800u2019 doesnu2019t exist in either systems ERP / CRM) and gives a error message.
If you have any idea how sales area determination works in follow-up ERP Sales order please share.
your help will be highly appreciated
Thanks
Manjushail

Hi Christian,
If the service order line items are entittled to service contract , at each item level you will get contract info in contract data tab.
when you transfer these items to confirmation , confirmation item contract data will not have contract information. Only when you enter items in confirmation manually then system will pop up window for selection contract and confirmation items get contract information.
thanks,
Nitin

How to confirm a Sales Order from CRM 7.0

Hi.
The scenario occur into CRM 7.0 standalone.
I have a sales order without delivery , however this sales order would be billed. The item category is relevance for billing with Transaction-Related billing according to order quantity. The Billing type, Item category and item category determination were completed, but, There is nothing on the Billing due list after I completed the sales order, May be the sales order mus be completed with confirmation action....
Wich is the standard transaction type and item category to confirm this sales order?
Im traying to confirm the sales order into actions tab (order confirmation- Sold To), however the system send me this message "the action definition in Customizing is configured so that it may not be changed in the dialog". I want to execute the action in the document, how to aplly this change?.
Im traying Copying Control for Business Transactions ( SRVC) , but when follow-up transaction occurs (Covert Sales order to Confirmation) , the system send me this message " You need a service organization", I dont have this organizational Unit into CRM scenario,
Regards.
Thannks in advance.

Hi.
I have confirmed the sales order into status tab .
regards

Please help me to upload sales order from crm 4.0 to R/3 47

Hello friends and gurus,
in smofparsfa there are two entries:
R3A_SALES INTCHANGE_ORDER ZTTA A
R3A_SALES INT_CHANGE_ORDER ZTTA A
in crmconsum R/3 there is the entry
800 CRM X CRM R3A
In crmconsum crm there is the entry
100 CRM X OLTP R/3 ADAPTER FOR CRM&CDB R3A
in R/3 crmparoltp there are entries
800 CRMSCENARIO INT_CHANGE_ORDER ZTTA CRM
800 CRM_SCENARIO INT_CHANGE_ORDER ZTTA CRM
The Badi CRM_SALESDOCU_R3A
with interface IF_EX_CRM_BUS20001_R3A
and method CALL_UPLOAD_FUNCTION is active.
But in SMW01 the bdoc said that the order wasn't uploaded.
Two errors: no upload started CRM_ORDER_MISC022
R/3-Adapter is calling CRM_ORDER_MISC024
What is the reason?
Can You tell me what I forgot, please?
Thank You for Your help.
Have a nice day.

ready

Replication of Business partner and the Sales document from CRM to R/3

HI All ,
I am completely new to this CRM technical , I need some technical document on how can I replicate BP and sales documents from CRM to R/3 through CRM middleware .
Please help me out in this regard .
Regards
Debasri Sarkar

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Creation of sales order in CRM and replicating it to Multiple ECC system.

We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
We have checked the following standard Adapter objects in transaction R3AC1.
BUS_TRANS_MSG
The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
to ECC.
2. SALESDOCUMENT
Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
other adapter object we need to use for this.

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

Replication of BP and Sales order from CRM to R/3

Similar Messages

Maybe you are looking for