Replication of BP from CRM to IS-U (ECC)

Hello,
Our problem is that the BP with the role sold-to party created in CRM is not being replicated in the contract partner role (MKK) in IS-U and the SD-customer is also not being created in ECC.
I can see the problem is that an appropriate reference customer model is not found.....but shouldn't the reference customer be taken from table TCRMBP_REFCUST when the BP is created in CRM??
Because in IS-U: SAP Utilities > Master Data > Business Partner> Settings for Creating Standard Customers
...You can only define one reference customer for the role Contract patner (MKK)....and here we have used the reference customer for BP created in IS-U.
I believe we need two reference customer (models), one that is used when the BP is created in IS-U and one when the BP is created in CRM...is this correct?
System information:
We have followed the IS-U specifications for the set-up and load guide for the BP. We have suceeded with the initial download from IS-U/ECC -> CRM.
Now we are trying to create BP in CRM and get it replicated to IS-U(as MKK) and ECC (as SD-customer xd01). CRM ->IS-U/ECC Is not working as assumed.
We are using the 'Strategy for Number Assignment Using the Same Numbers' and 'Strategy for Equal Status Systems' (IS-U/ECC->CRM and CRM ->IS-U/ECC)
Hope someone can help us out. I will reward maximum points
Kind Regards
Saima

Hello Irene,
Thanks for your reply.
The parameters in the PIDE transaction should be ok as there is no problem in this kind of correspondance...
The problem is that you can only define one reference customer for the BP role Contract patner (MKK).....and here we have used the reference customer(100110) The numberrange for BP created in IS-U is 100110-199999 that's why the replication works correctly for BP's created in IS-U.
On the other hand the no. range for BP created in CRM is 200111-299999. This leads to problems, as the contract partner can only be allocated to reference customer 100110 and not the reference customer (200114) which is meant for BP created in CRM.
When we create the BP (Sold-to party) in CRM it creates a BP (Contract partner) in IS-U...this contract partner has a field for reference customer, which remains empty when the BP is created in CRM => This leads to the fact that no SD customer is created in the background.
My question is how the SD partner can be created in the correct no. range....Can I somehow populate this reference customer field for BP (Contract partner) during the replication from CRM to IS-U?
Kind Regards
Saima

Similar Messages

Replication of Prospects from crm to r\3

hello Experts
is there any way to stop the replication of prospects from crm to r/3.....
we are facing a problem with out validating the prospect the prospects are replicating in r/3...
can u please help me out in this
thanks in advance
regards
sreeram

Shweta is right about the PIDE setting in R/3, but this does stop only the update in R/3, not the sending of prospects towards R/3.
To do it correctly, you need to create new subscriptions for the R/3:
1. Delete the subscription, publication and replication object on BUPA_MAIN in SMOEAC
2. Create a new intelligent replication object with filter on IS_CUSTOMER with option EQ (which means you want only customers to be replicated). Alternatively you can create a filter on IS_PROSPECT and option NE
3. You create the appropriate publication and subscription and assign it to the R/3 site
Now only BP's with the customer flag will get replicated (or those without the prospect flag). The customer flag will get set usually automatically with the customer role or can be manually set in the classification tab of role customer (field BPISCUST), but the prospect flag will stay if you turn the prospect into a customer.
So you need to make sure that when setting the BPISCUST flag that the BPISPROS flag is unset, when you do the alternative filtering on IS_PROSPECT (manually or in a BADI on customer save).
Regards, Kai

TCRMBP_REFCUST --- Replication of BPs from CRM to ECC

Hi -
We have a CRM - ECC (SD / ISU) environment.
I have a question about TCRMBP_REFCUST table.
1. How exactly is this table used? Is this table used when replicating the CRM BP into ECC?
2. This table seems to give me a better control over the sales area I want for the replicated partner in SD? But, I am confused about using this table and using the PIDE table (CRM -> R3) as they both control the Account Group for the SD Customer.
3. So, can somebody please give more explanation on how the TCRMBP_REFCUST & the PIDE table (CRM -> R3) play together in this replication process?
Thanks in advance for your help.
Regards,
Pradhip.S

Hi Pradhip,
Perfect, lets visit SAP documentation again - [Business Partner Replication|http://help.sap.com/saphelp_crmscen70/helpdata/en/60/85b5d333f4174b8e982c1c15db35f3/frameset.htm].
In 1st few paragraphs, it describes about "concept of the business partner or SD customer in SAP ERP" - which is as follows:
When creating or changing a business partner with the role Sales Prospect or Contract Partner, you can specify a sample customer (SD customer) in SAP ERP. This creates an SD customer for the business partner with the same number as the business partner. Data is copied from the sample customer (tables KNA1, KNB1, KNVV, KNVP, KNVA, KNVI, KNVD, KNEX, KNVS and KNVL). Name and address data, as well as some additional fields, are transferred from the business partner. If the SD customer already exists, the system only transfers part of the data from the sample customer (only the sales and distribution areas that do not yet exist).
Above settings is maintained at SAP Utilities->Master Data->Business Partner->Settings for Creating Standard Customers->Maintain Parameter (Table - TEKND).
(*Back to SAP documentation*)
If you now connect a CRM system, the central data from the CRM business partner is exchanged with the business partner in SAP ERP, and the CRM-specific data is exchanged with the SD customer. The CRM business partner has the same number as the business partner in SAP ERP and the SD customer.
You work mainly with the BUPA_MAIN queue. You only work with the CUSTOMER_MAIN queue when you are changing SD customer data, such as sales area data.
To execute the business partner concept specific to the utilities industry, you must convert the following control tables....
So, since CRM is in place which will act as central data management, we need to maintain reference customer values in CRM specific tables in ECC.. where table TCRMBP_REFCUST will be useful. This table is accessed by function module - COM_BUPA_MWX_MAP_ISU (Mapping - Proxy-BAPI Business Partner Main-BDOC).
Now if we read following statments on table TCRMBP_REFCUST, it will make sense:
(*Back to SAP documentation*)
Sample Customers in the Delta Upload
You can store sample customers in the ERP table TCRMBP_REFCUST (transaction SE16). These sample customers are used when creating a business partner in SAP CRM. This means that less data is transferred than when creating an R/3 business partner (ERP tables KNVD, KNB1, KNEX, KNVS and KNVL; transaction SE16).
In table TCRMBP_REFCUST, the system searches generically for a sample customer:
First it searches by Category, Grouping, and Type, then by Category and Grouping (with Type = SPACE), then only by Category (with Grouping and Type = SPACE), and finally with all three key fields as SPACE.
Initial Download
Before performing the initial download, check whether an SD customer has been created for all business partners in SAP ERP, for which this is desired or necessary. (For example, to an SD customer is necessary to use the billing engine in SAP CRM).
You should also check whether business partners already exist for all SD customers. Business partner creation for SD customers is supported by tools (for example, during the SAP for Utilities implementation). In the scenario described, you must not directly create any SD customers (except sample customers), as you are not replicating anything in SAP CRM.
Please let me know if this was helpful.
Regards,
Avinash

BP replication from CRM to R/3 (ECC)

Hi all,
I have a question regarding BP replication from CRM to R/3.
In transaction PIDE I can only set up one combination of classification B (Customer) and account group, e.g. Z001 for Sold to partner.
What could I do if I need to replicate a Bill-to partner role from CRM to R/3 and the Bill-to partner account group in R/3 is not Z001?
Thanks a lot!
BR,
//Anders

Hi Anders,
While transfering business partner from CRM to R/3 the system only looks at classification and identifies the Account Group form PIDE settings.
For the roles Sold-to, Bill-to, Payer, Ship-to, Classification Customer is Picked Up and hence all of them will be mapped to the same account group.
May be u can try to change the classification of Bill-to Role to something else, and map that to the other account group.
OR
Try to use a middleware exit or BADI which gets called before creation of a customer master in R/3, wherein u can put a code for picking up a different account group.
Wish this helps.
Regards,
Shalini Chauhan

Middleware-Filter settings for the replication of BP from CRM to R/3

Hi Experts,
Can we set filter criteria for the replication of BP's from CRM to R/3 in the delta load.If so how can we achieve it.
Points will be rewarded.
Thanks in advance
Nadh.

Dear Nadh,
Pls go through the followings:
http://help.sap.com/bestpractices/crossindustry/crm/v240/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc
http://help.sap.com/bestpractices/BBLibrary/documentation/D63_BB_ConfigGuide_EN_UK.doc
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C03
Thanks,
Atin

Replication od order from crm to r/3

I'm trying to Create order in CRM 4.0 and wanted to replicate to ECC 5.0, for replicating order from crm to r/3,what are the settings required both in r/3 and crm
Thanks&regards
kishore kumar
Edited by: kishore kumar on Jun 11, 2008 12:10 PM

Hi Kishore,
You can refer to in Best Practice C71 - connectivity.
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C71_BB_ConfigGuide_EN_US.doc
The above one is for CRM 5.0, but its similar in 4.0 too, except for a table entry in R3 side. In ECC table CRMPAROLTP, you have to specify the release version of the CRM system.There you mention your proper CRM release (400 instead of 500) . FOr rest of the config, use the same manual.
ALso, refer "C03: CRM Master and Transaction Data Replication":
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc
This 2 docs are sufficient for normal replication.
If you want full Middleware setup, in best practice, follow the documentation - B01, C71, B09, C03 in that order.
Hope this helps. Let me know if you want anything more.
Reward points if this helps.
Regards,
Alin

Replication of BPs from CRM to R/3

Hi folks,
I have a task of replicating BPs from CRM to OLTP system. I am new in this area. Can anyone guide me with some kinda step by step documentation, SAP notes. Once I am done with this, I need to replicate the Sales Orders too. Please guide.
Thanks
John

Hi Fredrick
Just check out the Best Practices for CRM Master data and transactional data replication guide (C03) on the following link.
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
It should help you with BP and transactions replication both
Hope this will help
Regards,
Rekha Dadwal
You gain a point for every point that you reward. So reward helpful answers generously

Replication of BP from CRM to ECC

Hi,
Can some one tell me the procedure to replicate BP master data from CRM to ECC.
Regards,
SAP CRM MW.
Message was edited by:
SAP CRM

Hello Friends,
Can you help me to resolve my WEB CATALOG Image issue in the following weblog.
WEBCATALOG not working in CRM
Your help in this regard shell be highly appriciated.
Jaswant

Product Replication from CRM 5.0 to ECC 6.0

Hi,
 My requirement is to replicate newly created product master from CRM to ECC.
 For this I created subscription with publication name Product Materials (MESG).
 Nest created product in CRM, but this product is not replicated to ECC. But BDoc generated successfully with status green.
 Where as new sales orders,change sales orders, BP changes, Product master changes are replicated in ECC from CRM and Vice Versa.
 Appreciate, if some one could tell me the steps I need to do in ECC & CRM to replicate new products created in CRM into ECC.
Thanks & Best Regards,
SAP CRM MW.
Message was edited by:
 SAP CRM

Hi BPB,
Have you created a number range for materials in CRM?
If you create materials in the R/3 system and the CRM system in parallel, duplicate numbers for different materials may occur if the number ranges in the R/3 system and the CRM system are overlapping. Duplicate numbers do not cause errors because each material gets an internal unique identifier in addition. To avoid duplicate numbers you have to make sure that the number ranges for materials in the CRM system and the R/3 system do not overlap.
Remove the subscription in Adminconsole that is not required for the product upload.
The upload function is only active in product processing if this was allowed in Customizing.
The corresponding path in the SAP reference IMG is 'Customer Relationship Management -> Master Data -> Product -> Settings for Product Type -> Allow Upload for a Product Type'.
Reward points if it helps!!
Best regards,
Vikash.
Message was edited by:
 Vikash Krishna

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Passing Filed Values from CRM CIC Webclient into ECC thru Transctn Launcher

Dear Experts,
I am a CRM Consultant, working for IC Webclient implementation (Call Center Application from SAP). We are creating an Interaction record (a CRM transaction) after receiving a call from customer.
in the same IC Webclient screen we are calling ECC transaction using a CRM concept scenario Transaction Launcher.
Now the requirement is to pass the information like priority, reason, employee responsible and Text from Interaction record into the ECC transaction (IW51) which will be availabe in same screen but belongs to CRM and ECC systems respectively.
there is no standard configuration available for this, and a development is strongly required.
I dont know which functionality can be used to achieve this requirement. can we use RFC Function Module for this? what could be the best solution for this.
kindly help me to resolve this issue. Your suggestions will be highly appreciated.
Best regards
Raghu ram

Hello Raghu,
Try see if the ITS link it is OK. For me, note 917302 was very useful to understand what service to use, and how to fill the link at 'crms_ic_cross_sys' transaction.
A FAQ-style note is also available. Check note 990216.
Kind regards.
Bruno

Validate Prospect replication from CRM 7.0 to ECC

Hello Gurus
We have the rek which is as follows
We will create a BP with Partner Type prospect in CRM - This Prospect should not Replicate to R3.
Later we change this Prospect to Validate Prospect in CRM -this Validate prospect need to replicate to R/3
for that we have made the coding in CRM 4.0 erlier which was working fine, now we have upgraded the sytem to CRM7.0 the scinario is not working
below is the coding
POO1 :Prospect
p002:Validate Prospect
Sourcecode
DATA:
 lv_assigned(1) TYPE c,
 lv_task TYPE bus_ei_object_task,
 lv_bpkind TYPE bu_bpkind.
FIELD-SYMBOLS:
 <ls_bp> TYPE bus_ei_extern.
***Needed for Debugging Internet Sales
DATA: x TYPE i VALUE 1.
DO.
 IF x = 0.
 EXIT.
 ENDIF.
ENDDO.
LOOP AT c_bp_struct-partners ASSIGNING <ls_bp>.
 lv_task = <ls_bp>-header-object_task.
 lv_assigned = 'X'.
ENDLOOP.
IF NOT <ls_bp> IS ASSIGNED.
 EXIT.
ENDIF.
IF lv_task = 'I'.
 lv_bpkind = <ls_bp>-central_data-common-data-bp_centraldata-partnertype.
ELSE.
 IF NOT <ls_bp>-central_data-common-data-bp_centraldata-partnertype IS INITIAL.
 lv_bpkind = <ls_bp>-central_data-common-data-bp_centraldata-partnertype.
 ELSE.
By all other mutations read bpkind from but000 sind it is not present as input parameter
 SELECT SINGLE bpkind FROM
 but000
 INTO
 lv_bpkind
 WHERE
 partner = <ls_bp>-header-object_instance-bpartner.
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
 ENDIF.
ENDIF.
Check BPKIND = P001 (Propect) If yes do NOT replicate
IF lv_bpkind = 'P001'.
 CLEAR c_bp_struct.
ELSE.
 EXIT.
ENDIF.
Remote function call
u2022 Z_REPLICATION
Z_STOP_REPLICATION Stop replication based on P002
u2022 Interface
CALL FUNCTION 'Z_STOP_REPLICATION'
EXPORTING
IV_MODE =
TABLES
TI_BAPIIDLIST =
CHANGING
 c_bp_struct =
u2022 SAP tables
The entry below is add to table CRMC_BUT_CALL_FU
150 CRMOU BUPA 0500000 Z_STOP_REPLICATION X
Here by requesting u to give ur inputs.....

Hello Gurus
As per the note :757955 we have changed the item no for the functional module, but still the data is not following
(If there are additional customer-specific Z modules that are
registered in this table, you may have to change the item numbers. The
standard modules that are used to create business partners or
relationships have the line item number 1000000. Customer-specific
modules, which need these objects to exist before they can be
processed, must therefore have a line item number greater than
1000000. This applies especially to modules that have line item
numbers greater than 100000 but less than 1000000)
How to fix this ...

BP replication from CRM 7.0 to ECC 6.0

Hi Gurus,
when ever we create new BP in CRM , it is not replicating to ECC
A bdoc type "bupa_main" is generated in txn:Smw01 which reads "partially send, receivers" error type 02, state not processed ,
it gives error "fill in all required entry"
though even after maintaining this we are getting same error.
Error message "Fill in all required entry fields" (Error Message no. 00055).
we also checked in CRM
txn:smoeac that subscriptions are maintained for BUPA_MAIN.
and role assigned to BP is "sold to party" and it is without error.
ECC:
txn:PIDE
account group is clasified as type "B".
txn:ovt0
same account group is marked as "default SP"
number range is maintained same as CRM but external here.
Please help it is critical.
Thanks,
G.One
Edited by: wwgauravshah on Jan 6, 2012 11:40 AM
Edited by: wwgauravshah on Jan 6, 2012 11:40 AM

Hello wwgauravshah ,
When a BP replication to R/3 fails with the error 'Fill all required
fields', It is possible to debug the upload as follows in order to
identify the required field,
Then it is necessary to maintain this field and subsequently resend
the business partner using the transaction CRMM_BUPA_SEND
Recreate the BDOC for the BP, by running the transaction CRMM_BUPA_SEND
1. Display the BDOC in SMW01
2. Enter /h in the transaction code field
3. Press the 'retry to process message' button.
4. In the debugger - select the Settings button and 'In background task
   do not process'
5. Enter F8
6. Create a new session for the outbound queue (/osmq1) there will be
   an entry R3AUBUPA*** or CSA_BUPA**
7. Double-Click on this queue entry twice and choose Debug for the
   CRM_UPLOAD_TRIGGER
8. In the debugger, set a breakpoint at statement 'CALL TRANSACTION' and
   then press F8.
9. At this statement double-click on the statement CALL_TRANSACTION and
   change the variable CALL_TRANSACTION_MODE from N to A, press the
   'change field content' button and then press F8
10. Now you will be in the R/3 System and you can see the batch input
    screen for this customer and you will then be prompted for the
   missing field in the BDOC.
Please also review Note: 755107, especially point 8. This also tells you some fields that are required and which needs to be filled in the BP
Thanks
Willie

Replication of Quotation from CRM to ECC

Hi experts,
We are trying to replicate a quotation created in CRM to ECC. We have maintained the same transaction types and item categories in both ECC and CRM. Is there anything else that is required to be done for proper replication??
A CSA BDoc is generated and it is in green. There is no othe BDOC Generated.
The replication is not happening still.
What are we missing.? Please Guide.
Regards
Aakshi Suri

Hi,
Please check that the manual settings outlined in oss note 671243 regarding the entry in table SMOFPARSFA are maintained in your system.
Best Regards
Gavin

Replication sales order from CRM to R/3?

Hi Gurus
I need some advice. We are implementing CRM for a over client
Over sale Cycle is LeadOpportunity- sales order- delivery  billing
Once sales order created in CRM we have to send that sales order to SAP R/3
Then delivery and Billing will do in R/3?
So what are the Middleware settings we have to do?
Please explain me in a clear format
Regards u2026
Rosie

Hello Rosie,
If given not so complex scenario, you may go like this:
1.make all the necessary settings the same in CRM and R/3, including sales transaction type, item category ....
2.transaction smoeac, under R/3 site, create subscription to "All Business Transactions (MESG)"
If you does not want all the business transaction flow to R/3, you may consider to create a simple intelligent replication object for business transaction, and limit the data transfer for TA only for example.
Hongyan

Replication of BP from CRM to IS-U (ECC)

Similar Messages

Maybe you are looking for