Replication of BP hierarchy

Hi all,
          we need to replicate BP hierarchies from CRM to R/3 custom tables through initial as well as delta load.
          please help me out on this.

Hi,
This is not possible. You can only replicate the data of group hierarchy from R/3 to CRM but the other way round is not possible.
Thanks and warm regards,
Smita.

Similar Messages

  • Vendor Hierarchy in MDG

    Hello experts,
    I have a requirement for making a replication of Vendor Hierarchy, how it is on ECC, i need to produce the name results in MDG Supplier/Vendor.
    I do know that MDG works on Business Partner functionality, which is different.
    My question is, do we design from scratch Vendor Hierarchy or extend it.
    Also some inputs from MDG BP perspective, why is it different
    thanks and regards
    Abhishek

    Hi lvshaolong,
    Thanks a lot for your reply.
    I believe I have not misunderstood the business scenario.
    But may I request you to tell me the process steps for the senario you told which is "Normally , you define condition with highest node in hierachy and then you can refer to it when you do biz with the lower nodes". How vendor rebate process takes place this scenarion (I mean process flow).
    This might help me to find some solution further.
    More input from my end:
    When I am creating the PO against a vendor included in the vendor hierarchy(after agreement), rabate condiion A003  or A004 is not appearing in pricing and hence during BV comparison,system does not find any data to update.
    Regards,
    Munish

  • Set Hierarchy for 0GL_ACCOUNT with BW07

    Hello everybody,
    during the action of the replication of GL_ACCOUNT hierarchy, emerged the problem that GL_ACCOUNT have in compound 0CHRT_ACCTS but it is not correctly mapped.
    As a result before mentioned problem, the system is signaling the error in the hierarchy display.
    Example:
    It is expected in the hierarchy:
    Account number = S651600110
    Chart of account = PCAB
    Instead we found the following result:
    Account number = 600110
    Chart of account = S651
    The step followed
    Using the transaction BW07, i have created a custom data source in SAP R/3 (our hierarchy is implemented in SAP with a custom SET in GS03).
    In particoular we have flagged the field BW infoObject is Coumpounded.
    Afterwards we have inserted in the field Data Element for Coumpounding following value : KTOPL.
    Afterwards we have extracted the hierarchy level, using the BW's Infopackage.
    Someone have any idea?
    Thanks.

    Hi Same8
    I have exactly same issue, can you please shared the code in CMOD, or much better if you can describe step by step how to implement the solution
    Thanks in advance

  • Customer Hierarchy download in CRM7.0 Web UI

    Hi Experts
    Need your expert advice on the below issue:
    We are using customer hierarchy from ECC to SAP CRM7.0 for one of our client. I have performed the below steps to bring ECC customer hierarchy to CRM.
    SAP ECC System:
    1.Hierarchy node is created thru tcode- v-12
    2.Customer hierarchy is created thru tcode- VDH1N
    Replication steps in CRM:
    1.Replicate Customer Hierarchy Customizing thru TCode- R3AS, download object DNL_CUST_THIT .
    2.Assign ERP Customer Hier. to CRM hierarchy category in SPRO .
    3.Replicate Customer Hier thru Tcode u2013R3AS , download object DNL_BUPA_KNVH.
    4.Create account hierarchy thru Tcode- BPH_DNL , we need to create the hierarchy only for the sales area 0001,01,01.  So I have selected sales the required sales area only.
    5.I checked in web ui  and found the result for account hierarchies.
    Current Result:
    a.ECC hierarchy downloaded, however descriptions for the hierarchy nodes are missing in CRM web ui.
    b.Customer assigned to ECC hierarchy can be seen in the u201CAccount Hierarchy Detailsu201D assignment block , however I could not see the customers in u201C Assigned Accountsu201D assignment block.
    6.Expected Result :
    a.ECC hierarchy display with description in u201C Account Hierarchy Detailsu201D assignment block.
    b.Display customeru2019s information in u201C Assigned Accountsu201D assignment block.
    Can anybody support and provide the information if we are missing any configuration step ? or the result is the correct behavior of standard system ?
    I would really appreciate your help on this.
    Regards
    Satish Rikhi

    Hi Tanya
    My issue is got sovled with SAP note 1398619 .However, for the second issue there is no finding.
    I am assuming ,that is standard SAP CRM behaviour , if we assign any account in crm , that will be shown in the assignment block.
    Regards
    Satish

  • Fields missing from PSA Hierarchy transfer structures

    Hi,
    I am facing a strange problem. After replicating the source system and running program RS_TRANSTRU_ACTIVATE_ALL  we are getting errors in 0Equipment_hier and 0funct_loc_hier. it complains about missing equnr and tplnr fields from the transfer structure.
    We were using the datasources all the while, but we might not have done the replication in a long time.
    Since it is a PSA hierarchy, it has Header and Node communication structures. The Node should be mapped to EQUNR but it not coming from Transfer structure.
    I executed 0Equipment_hier from RSA3 and I can see the fields like nodename and infoobject. but even in PSA we don't see the fields.
    We applied latest SPs in BW. SP 20 BW 3.5. Any help is appreciated.

    hi Chimei,
    try to check the transfer structure if the fields have been included,
    rsa1-infosource-0equipment transfer rules - change transfer rules,
    click tab 'datasource/transf.rules', check if the equnr is in left side (bw transfer structure), if it's not there, check if it's in right side (source system extract structure), if it's there, cursor position on it and use right arrow button there to have it in right side.
    hope this helps.

  • Active Directory replication and login errors (Plz HELP !!)

    Hi All,
    We have one forest domain (XXXX.LOCAL)and lots of child domains (XXX.XXXX.LOCAL).
    We are facing issue that child domains are not able to login with forest administrator account and there are also lots of replication errors.
    Exchange OWA gives error of not able to find particular XXX.XXX.local child domain.
    dcdiag from child domain is :
    C:\Windows\system32>
    C:\Windows\system32>nltest.exe /dsregdns
    Flags: 0
    Connection Status = 1311 0x51f ERROR_NO_LOGON_SERVERS
    The command completed successfully
    C:\Windows\system32>nltest.exe /dsregdns
    Flags: 0
    Connection Status = 1311 0x51f ERROR_NO_LOGON_SERVERS
    The command completed successfully
    C:\Windows\system32>
    C:\Windows\system32>dcdiag
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = PMA-DC01
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: HEC-CITY\PMA-DC01
          Starting test: Connectivity
             ......................... PMA-DC01 passed test Connectivity
    Doing primary tests
       Testing server: HEC-CITY\PMA-DC01
          Starting test: Advertising
             Warning: PMA-DC01 is not advertising as a time server.
             ......................... PMA-DC01 failed test Advertising
          Starting test: FrsEvent
             ......................... PMA-DC01 passed test FrsEvent
          Starting test: DFSREvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... PMA-DC01 failed test DFSREvent
          Starting test: SysVolCheck
             ......................... PMA-DC01 passed test SysVolCheck
          Starting test: KccEvent
             ......................... PMA-DC01 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             [PMA-DC02] DsBindWithSpnEx() failed with error -2146893022,
             The target principal name is incorrect..
             Warning: PMA-DC02 is the PDC Owner, but is not responding to DS RPC
             Bind.
             [PMA-DC02] LDAP bind failed with error 8341,
             A directory service error has occurred..
             Warning: PMA-DC02 is the PDC Owner, but is not responding to LDAP
             Bind.
             Warning: PMA-DC02 is the Rid Owner, but is not responding to DS RPC
             Bind.
             Warning: PMA-DC02 is the Rid Owner, but is not responding to LDAP
             Bind.
             Warning: PMA-DC02 is the Infrastructure Update Owner, but is not
             responding to DS RPC Bind.
             Warning: PMA-DC02 is the Infrastructure Update Owner, but is not
             responding to LDAP Bind.
             ......................... PMA-DC01 failed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... PMA-DC01 passed test MachineAccount
          Starting test: NCSecDesc
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             Fatal Error: Cannot retrieve SID
             ......................... PMA-DC01 failed test NCSecDesc
          Starting test: NetLogons
             ......................... PMA-DC01 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... PMA-DC01 passed test ObjectsReplicated
          Starting test: Replications
             [Replications Check,Replications Check] Inbound replication is
             disabled.
             To correct, run "repadmin /options PMA-DC01 -DISABLE_INBOUND_REPL"
             [Replications Check,PMA-DC01] Outbound replication is disabled.
             To correct, run "repadmin /options PMA-DC01 -DISABLE_OUTBOUND_REPL"
             ......................... PMA-DC01 failed test Replications
          Starting test: RidManager
             ......................... PMA-DC01 failed test RidManager
          Starting test: Services
                w32time Service is stopped on [PMA-DC01]
             ......................... PMA-DC01 failed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x00000010
                Time Generated: 04/21/2014   19:16:04
                Event String:
                Unable to Connect: Windows is unable to connect to the automatic upd
    ates service and therefore cannot download and install updates according to the
    set schedule. Windows will continue to try to establish a connection.
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:42
                Event String:
                The dynamic registration of the DNS record '_kerberos._tcp.dc._msdcs
    .PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the fol
    lowing DNS server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kerberos._tcp.PMA.XXXX.
    LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
     server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kerberos._tcp.HEC-LAHOR
    E._sites.PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on
     the following DNS server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kerberos._udp.PMA.XXXX.
    LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
     server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kpasswd._tcp.PMA.XXXX.L
    OCAL. 600 IN SRV 0 100 464 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
     server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kpasswd._udp.PMA.XXXX.L
    OCAL. 600 IN SRV 0 100 464 PMA-DC01.PMA.XXXX.LOCAL.' failed on the following DNS
     server:
             An error event occurred.  EventID: 0x0000168E
                Time Generated: 04/21/2014   19:44:43
                Event String:
                The dynamic registration of the DNS record '_kerberos._tcp.HEC-LAHOR
    E._sites.dc._msdcs.PMA.XXXX.LOCAL. 600 IN SRV 0 100 88 PMA-DC01.PMA.XXXX.LOCAL.'
     failed on the following DNS server:
             An error event occurred.  EventID: 0x00000C8A
                Time Generated: 04/21/2014   19:44:51
                Event String:
                This computer could not authenticate with \\LHR-DC01.XXXX.LOCAL, a W
    indows domain controller for domain XXXX, and therefore this computer might deny
     logon requests. This inability to authenticate might be caused by another compu
    ter on the same network using the same name or the password for this computer ac
    count is not recognized. If this message appears again, contact your system admi
    nistrator.
             An error event occurred.  EventID: 0xC00A0038
                Time Generated: 04/21/2014   19:46:02
                Event String:
                The Terminal Server security layer detected an error in the protocol
     stream and has disconnected the client. Client IP: 10.87.193.37.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 04/21/2014   19:52:41
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
    rver pma-dc02$. The target name used was PMA\PMA-DC02$. This indicates that the
    target server failed to decrypt the ticket provided by the client. This can occu
    r when the target server principal name (SPN) is registered on an account other
    than the account the target service is using. Please ensure that the target SPN
    is registered on, and only registered on, the account used by the server. This e
    rror can also happen when the target service is using a different password for t
    he target service account than what the Kerberos Key Distribution Center (KDC) h
    as for the target service account. Please ensure that the service on the server
    and the KDC are both updated to use the current password. If the server name is
    not fully qualified, and the target domain (PMA.XXXX.LOCAL) is different from th
    e client domain (PMA.XXXX.LOCAL), check if there are identically named server ac
    counts in these two domains, or use the fully-qualified name to identify the ser
    ver.
             A warning event occurred.  EventID: 0x8000001C
                Time Generated: 04/21/2014   19:53:42
                Event String:
                When generating a cross realm referal from domain XXXX.LOCAL the KDC
     was not able to find the suitable key to verify the ticket. The ticket key vers
    ion in the request was 25 and the available key version was 22. This most common
     reason for this error is a delay in replicating the keys. In order to remove th
    is problem try forcing replication or wait for the replication of keys to occur.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 04/21/2014   20:13:25
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
    rver pma-dc02$. The target name used was LDAP/4a166db9-c39c-4069-99e7-8a233ce2c0
    be._msdcs.XXXX.LOCAL. This indicates that the target server failed to decrypt th
    e ticket provided by the client. This can occur when the target server principal
     name (SPN) is registered on an account other than the account the target servic
    e is using. Please ensure that the target SPN is registered on, and only registe
    red on, the account used by the server. This error can also happen when the targ
    et service is using a different password for the target service account than wha
    t the Kerberos Key Distribution Center (KDC) has for the target service account.
     Please ensure that the service on the server and the KDC are both updated to us
    e the current password. If the server name is not fully qualified, and the targe
    t domain (PMA.XXXX.LOCAL) is different from the client domain (PMA.XXXX.LOCAL),
    check if there are identically named server accounts in these two domains, or us
    e the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 04/21/2014   20:13:25
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the se
    rver pma-dc02$. The target name used was ldap/pma-dc02.pma.XXXX.LOCAL. This indi
    cates that the target server failed to decrypt the ticket provided by the client
    . This can occur when the target server principal name (SPN) is registered on an
     account other than the account the target service is using. Please ensure that
    the target SPN is registered on, and only registered on, the account used by the
     server. This error can also happen when the target service is using a different
     password for the target service account than what the Kerberos Key Distribution
     Center (KDC) has for the target service account. Please ensure that the service
     on the server and the KDC are both updated to use the current password. If the
    server name is not fully qualified, and the target domain (PMA.XXXX.LOCAL) is di
    fferent from the client domain (PMA.XXXX.LOCAL), check if there are identically
    named server accounts in these two domains, or use the fully-qualified name to i
    dentify the server.
             ......................... PMA-DC01 failed test SystemLog
          Starting test: VerifyReferences
             ......................... PMA-DC01 passed test VerifyReferences
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : PMA
          Starting test: CheckSDRefDom
             ......................... PMA passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... PMA passed test CrossRefValidation
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running enterprise tests on : XXXX.LOCAL
          Starting test: LocatorCheck
             ......................... XXXX.LOCAL passed test LocatorCheck
          Starting test: Intersite
             ......................... XXXX.LOCAL passed test Intersite
    C:\Windows\system32>

    There are a number of things that can cause this, such as:
    DNS is misconfigured to support a parent-child-additional tree forest.
    Incorrect DNS zone replication scope for the design, which points back to the point #1.
    AD Sites are misconfigured for the physical environment. For example if you have a hub and spoke physical environment, you can't use the default settings that bridge all sites (BASL) and must individually configure them.
    Incorrect DNS settings on the DCs.
    Multi-homed DCs.
    Time service is not configured properly and/or syncing from the VM host, which should be configured otherwise (Microsoft, VMware and Citrix have KBs explaining this).
    Default security settings at either the parent, child or both domains, have been altered.
    Firewalls between DCs, such as perimeter firewalls, or installed antivirus protection features if not excluded on DCs properly, will cause this, too.
    That's the short list. If you can describe some of the points above, it may help us pinpoint where the issue may be.
    Some links that may help understand some of the bullet points:
    AD Site Design, DNS & the DC Locator Process, and Auto Site Link Bridging, or Bridge All Site Links (BASL)
    http://blogs.msmvps.com/acefekay/2013/02/24/ad-site-design-and-auto-site-link-bridging-or-bridge-all-site-links-basl/
    DNS Design Options in a Multi-Domain Forest - How to create a Parent-Child DNS Delegation, and How to Configure DNS to create a new Tree in the Forest
    Published by Ace Fekay, MCT, MVP DS on Oct 1, 2010 at 12:22 PM
    http://msmvps.com/blogs/acefekay/archive/2010/10/01/dns-parent-child-dns-delegation-how-to-create-a-dns-delegation.aspx
    Configuring the Windows Time Service for Windows 2000, 2003, 2008 and newer, explanation of the time service hierarchy, and more
    Published by Ace Fekay, MCT, MVP DS on Sep 18, 2009 at 8:14 PM  3050  1 
    http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • PDW : Hierarchy parent/child

    Hi,
    I'm working with a PDW Appliance as source and destination.
    I need to create a parent/child hierarchy.
    My child surrogate key is generated inside my dataflow, then I'm doing the initial loading of all my data minus the surrogate key for the parent column.
    I'd like to avoid to run update statements against my destination table (because of the replication) and/or have to create temp tables.
    I thought about keeping in memory (Recordset Destination) all my dataset and then doing the look up in a script component before doing the final insert in append mode but the performance are awful.
    Any idea ?
    Thx for your help.
    Bertrandr

    Thanks to have remind me about the CacheTransform component :)
    The dataset is about 200 000 rows.
    I have also tested another option.
    Instead of performing an initial load and then look up
    I'm doing a multicast pointing to 2 RecordSet Destination.
    Both are the same except it's 2 differents object variables.
    Then in another dataflow I read both dataset and use a MergeJoin on the business key to get my parent surrogate key.
    It works but I need to compare performances with your solution.
    Thanks a lot !
    Bertrandr

  • Vendor and Contract Hierarchy

    I have a question that is about making a link with Vendor and Contract Hierarchy. First it is not clear how I can set the Vendor Hierarchy, I want to upload vendors from R/3 and for that I can create a vendor group and then upload but then how I can make a Vendor Hierarchy and I am not sure that I understand the correct thing about Vendor Hierarchy?
    Thanks in advance if you clarify this on going issue in my mind.
    Best Regards,
    #Bill J.

    Hi Bill,
    For using Product Cat.\Vendor\Contract hierarchy activate follwing before any data replication in EBP .
    Spro->SRM Server->Cross. App.->Activate Hierarchies for Product Categories, Vendors, and Contract .
    Regards,
    Sachin S M

  • Hierarchy R3PRODHIER may only be changed in the original system

    Hi Experts
    I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying :  Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of  DNL_CUST_PROD1 status was green.
    And again i try to replicated the DNL_CUST_PROD1 by  reguest load which has run successfully and 3 blocks are generated then  i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
    then i again  created a Request load for Object Material and which is run success fully
    but my problem is i did not see the  new hierarchy and products too in Table COMM_PRODUCT
    .and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
    Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
    i would appreciate you help
    thanking you
    Regards
    Swathi

    Hi Swathi,
      I'm assuming this development is copied from your production.
    For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
      After the client copy, basis needs to execute BDLS transaction.  This transaction is used to convert the logical systems in all the Database Tables.
         Perform this conversion only for Client Dependent Tables.
         Execute below conversion in CRM Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
          In ECC Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
    Regards,
    Bhanu

  • Issue making Cost Center Hierarchy Time Dependent

    Hi,
    We have three hierarchies on top of cost center and cost center was not time-dependent. There is a new requirement to make one of the hierarchies time dependent. To faclitate it, I changed the hierarchy property in cost center infoobject to "Hierarchy structure is time-dependent" and then loaded the hierarchy.It took the validity dates of 1.1.1000 to 31.12.999. A costcenter was changed from one node to another in ECC and was extracted into BI. As time-dependency is set, I thought that node will have two entries now one with validity period 1.1.1000 to 30.10.2009 and another with 31.10.2009 to 31.12.999. But instead the hierarchy was overwritten and only the latest change is refelcted.
    Can someone please help in figuring out the issue. Should some change be done in ECC for time-dependency to reflect.
    Thanks
    Achyuta

    Hey Achyuta,
    The hierarchy needs to be time dependent in the source system and then the datasource for the time dependent hierarchy would then need to be replicated again.  You'll know if it's right after the replication if you view the datasource in BW and the Data is Time Dependent check box is checked on the General Info Tab.  Once the datasource is time-dependent, loads should populate the DateTo and DateFrom as you expect.  Consult your R/3 expert if you need help over on the source system side.
    Peace,
    Dan Glick

  • Problem in customising replication

    Hai all,
        While carry on customising replication we are able to replicates other objects and get the Done status except  for DNL_CUST_PAYPL and DNL_CUST_PROD1 where we are getting the status as running. Could anyone help us to resolve it?
    Rgds,
    S.Jenibalet

    Hi,
    Hi,
    Just check have u maintained any numbering scheme for R3PRODHIER?
    Product hierarchy structure in R/3 is seen via SE11 in view PRODHS (Structure of Product Hierarchy (T179)
    In CRM,
    SPRO -->Cross-Application Components -->SAP Products --> Product Category --> Define Category Numbering Schemes
    If not maintained,
    Maintain product hierachy : R3PRODHIER with levels 5-5-8.
    Then through smwp delete the entry of DNL_CUST_PROD1 and again downlaod the object and check whether it is working or not.
    Thanks & Regards,
    Anirban

  • Product Category Hierarchy - SRM

    I have doubts on Product Category hierarchy....
    1) As far as i understand whenever we replicate the material from Backend R/3 there is a product hiearachy created and assigned automatically. However, we also have the option of creating local hiearachies.
    So, what i did was for the same product category i assigned two hierarchies. One the standard R3MATCLASS and other which i created manually in SRM. Then i assigned the two hierarchies while creating the material manually in SRM. However, i am not able to get the significance of this? Why has SAP provided this provision of having multiple hieararchies?
    2) I read from the help portal in SAP that Product Hierarchy helps in determining the source of supply. I am not able to understand how that is possible. I have searched for documentation all around but could not find any?
    3) In one of the forums i saw that one consultant activated the product hiearachy, then to his surprise the automatic sourcing configuration which he had done has not worked due to activation of hierarchies
    Has anyone worked indepth in this field. Any inputs is greatly welcome as i am doing some indepth work on this
    Thank You
    Abhinandan

    Hi
    1)
    2) Most of the time, We create multiple hierarchy levels in case of Extended Classic Scenario (ECS).
    3) Might be due to some bug (some OSS note is missing here).
    <b>Please go through the links as well -></b>
    http://help.sap.com/saphelp_srm50/helpdata/en/02/faeb38d391aa6ce10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
    Note 519794 - EBP: Replication of materials with purchasing view
    Note 720819 - Middleware consumer entry for SRM 40 and 50 in the OLTP-syst
    Note 902814 - Dump during product category download
    http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/3a/d6ad4240adb111e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/42/151D4193BB73ADE10000000A114B54/content.htm
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1245134,00.html
    http://www.infosys.com/industries/electronics_hightech/ViewPoint_Order_Management.pdf
    http://help.sap.com/saphelp_srm50/helpdata/en/c5/13e53c759d4d19a7e20d9d32569abe/frameset.htm
    Regards
    - Atul

  • Can't fix Active Directory replication

    Hi,
    I am not sure when the replication issue started, but it is for month now. Whe have two AD's and so actually, we have one working fine (probably). Users are replicated fine (at least they show in the second AD tree) and also, the group policies replicates
    (they show in the group policy tree).
    But, in the \\dc02\SYSVOL\domainname.com\Policies directory, nothing is shared. It's completely out of date. Also the group policy manager gives an warning: 1 Domain controller(s) with replication in progress.
    Anyway, me, and other members of the IT-staff looked into it but it looks that the problem goes deep.
    So my question is, what is the best way to solve this. Start to place some errors here or maybe we should completely re-install the second DC? Or both? Or is that a bad idea?
    Thanks for any help!

    Thanks for the responses!
    Problem is, Event viewer keeps giving different errors. I just restarted my secondary DC and it gives this error:
    This domain controller has migrated to using the DFS Replication service to replicate the SYSVOL share. Use of the File Replication Service for replication of non-SYSVOL content sets has been deprecated and therefore, the service has been stopped. The DFS Replication service is recommended for replication of folders, the SYSVOL share on domain controllers and DFS link targets.
    Before restart, I ran dcdiag again and it gave problems with NCSecDesc. So permission problem. I fixed that and after that I ran dcdiag again and no errors were showing. But sysvol directory was still not in sync.
    After that, I restarted and the top error is shown in event viewer and dcdiag gives me another, new error:
    Starting test: SystemLog
    A warning event occurred. EventID: 0x000727A5
    Time Generated: 04/16/2014 18:02:36
    Event String: The WinRM service is not listening for WS-Management requests.
    A warning event occurred. EventID: 0x80040020
    Time Generated: 04/16/2014 18:03:13
    Event String:
    The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled. Data corruption may o
    ccur.
    A warning event occurred. EventID: 0x80040020
    Time Generated: 04/16/2014 18:03:13
    Event String:
    The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled. Data corruption may o
    ccur.
    A warning event occurred. EventID: 0x80040020
    Time Generated: 04/16/2014 18:03:13
    Event String:
    The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled. Data corruption may o
    ccur.
    An error event occurred. EventID: 0xC0001B61
    Time Generated: 04/16/2014 18:03:40
    Event String:
    A timeout was reached (30000 milliseconds) while waiting for the File Replication service to connect.
    An error event occurred. EventID: 0xC0001B6F
    Time Generated: 04/16/2014 18:03:41
    Event String: The Diagnostic System Host service terminated with the following error:
    An error event occurred. EventID: 0xC0001B6F
    Time Generated: 04/16/2014 18:03:41
    Event String: The Diagnostic Service Host service terminated with the following error:
    ......................... DC02 failed test SystemLog
    After restarting the secondary DC, the primary DC gives an error on DFSREvent but I think that's OK because it lost the secondary DC for a minute. No further errors there.
    After restarting the primary DC, it gives also a SystemLog error, but different from the other DC with dcdiag:
    Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source
    , but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in the domain
    hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domai
    n, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function a
    s the authoritative time source in the domain hierarchy. If an external time source is not configured or used for this c
    omputer, you may choose to disable the NtpClient.
    A warning event occurred. EventID: 0x00000090
    Time Generated: 04/16/2014 18:31:25
    Event String: The time service has stopped advertising as a good time source.
    ......................... DC01 failed test SystemLog
    Now this is the current status. I am pretty desperate. Maybe you have some suggestions? Otherwise, I will try pbbergs' suggestion.
    Other errors in the event viewer (not sure if they are related but just posting to be sure):
    This domain controller has migrated to using the DFS Replication service to replicate the SYSVOL share. Use of the File Replication Service for replication of non-SYSVOL content sets has been deprecated and therefore, the service has been stopped. The DFS Replication service is recommended for replication of folders, the SYSVOL share on domain controllers and DFS link targets.
    Active Directory Web Services could not find a server certificate with the specified certificate name. A certificate is required to use SSL/TLS connections. To use SSL/TLS connections, verify that a valid server authentication certificate from a trusted Certificate Authority (CA) is installed on the machine.
    Certificate name: dc01.domainname.com
    The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
    Thanks for the help!

  • Material Replication from ECC to SRM 7.0

    Hi Experts,
    I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
    Errors:
    Hierarchy for material types does not exist
    (Before materials are imported from the ERP system, the material types from the  ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
    MATERIAL: Object will not be loaded
    Pl do the needful.
    Regards
    Mohan

    Hi  Pl check whether you follwed these steps are not.
    Hi find below for the product cat
    Steps to create the product category in SRM:
    1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3) Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Delta Replication for Customizing object from ECC- CRM

    I need help on delta replication activate for customizing objects from ECC to CRM.  I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL.  What business transaction do I need for those so the delta will work for them too?  Rewards points if helpful

    I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

Maybe you are looking for