Replication of BP linked with Customer number from R/3 to CRM

Hi,
We are trying to replicate BP linked with the customer number.
In R/3 when a BP is created automatically a customer is created for this BP (due to activation of synchrozination- BP -->Customer ) with different numbers and is available in the customer-general data tab of the BP in the field - Customer number.
Both BP and Customer are having different numbers this needs to be replicated to crm as a BP with the Customer number appearing in the Identificatio tab as R/3 customer number (identification type).
Example - A BP with number-100 is created then automatically a customer with number 2000 is attached to this BP -100. The same needs to be replicated to CRM. Both BP and customer shud have same GUID.
With the settings that is done now two records are getting created seperately one with BP number and other with customer number based on settings in PIDE.
How can we configure this?
Thanks & Regards
Prathiba

Hi,
I think you are using some IS component in ECC. Hope you are using BUPA_MAIN and BUPA_REL objects for downloading BP's to CRM. In PIDE you do not need to maintain mapping for customer.

Similar Messages

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

You've probably found an answer to this by now, but I think this has been addressed in another forum -- The link below suggested using a button and adding the tooltip to the button.
https://forums.adobe.com/thread/304974?start=0&tstart=0
Sounds like it would work but I haven't actually tried it.
Good luck~!

Function Module to fetch Customer Number from Sales Order or Process Order

Hi Gurus,
I am looking for a Function module which gives me customer number from Sales order or Process order.
Please let me know of any FM's available.
Regards,
Madan

Hi,
Thanks for your response.
I am actually looking for function modules which take "Sales Order" or "Process Order" as input (import parameter) and return Customer Number as output (export parameter).
Please suggest some function modules you know any.
Many Thanks,
Madan

No customer found with customer number

hello experts,
In R/3 e-commerece when we try to create a order, we are not able to create the order, we get a message as
No customer found with customer number
Even the images are displayed.
Please Help...................
Thanks & Regards
namitha

hello Deborah Corsi,
Thanks for immediate reply, Our backend system version is in kernel 700, we have not upgraded 701.
could you let us know what is Ehp4.
Warm Regards
Namitha

As I can contact me by phone or mail or chat or any way with customer service from Ecuador

As I can contact me by phone or mail or chat or any way with customer service from Ecuador

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Error in delta load of 'Customer Group' from R/3 to CRM

Hi Experts,
I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
Please help as it is a Production issue.
-- Pat

Hi Pat,
Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
Use R3AS4 transaction to execute the same.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Problems with Initial download from R/3 to CRM

Hi,
I tried to download the customizing objects from R/3 to CRM.I followed the SAP BP to create RFC Destination, Logical system, site id and RFC user. In our present system , the R/3 Plugin and Basis plugin version are different.I found from the SAP Notes that both the R/3 Plugin service pack and Basis plugin must be at the same version level in R/3.Is this the reason why I am getting error "SYSFAIL" in SMQ1(in the R/3 side).Plz let me know if i am missing something here.
Thanks.
Sudhan

Sudhan,
note the time & date of the sysfail error in the queue and look in both systems for short-dumps (transaction ST22) at that time and date. If you can't find any, than the error must be located in the Bdocs (SMW01) or in the application log (SLG1).
Also check you RFC destinations in the R/3 system (SM59) to see if your return connection to CRM is active.
Kind regards,
Michael.

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Customer Master data creation with customized number range

Dear all,
Can somebody know how to create the customized number range for customers like first 2 digits represents Sales organization and next 2 digit should represent circle,next 2 distribution chaneel and last 4 digits shold be the running number.
Looking for solution..
Thanks & Regards,
Murali.

Hi,
In your case you need to define as following
Step No: 01.
01.Sales Orgination with 0001 to 0099.
02.Regions with 00 to 99.
03.Distribustion Channel with 00 to 99
Step No:02.
Define PDP with the diffrent account groups defined for diffrent Sales Org, Regions & DC's.
Step : No: 03.
As per the above configs go to TCode for Number range for accounts groups in XDN1. Say Example as
XX--- From:1010100000 to: 1010109999. Note the possiable numbers are 0000 to 9999 only.
10 is sales Org, 10 is Region & 10 is DC's.
This is one of the way to do. The other way is to develo Z table and to use the user exit / new progarme to identify the requried number range with reference to Sales Org, Regions & DC's
Hope this is fine with your requrment.
Bye & enjoy SAP.
Koganti.

SAP ECO 5.0 B2B: No customer found with customer number

Hello all,
we´re using SAP E-Commerce for ERP 5.0 (SP9) with backend SAP ECC 6.0 EHP4.
We have changed from SU05 to SU01 user concept. All existing SU05 users have been migrated to SU01. In SU01 (under references) for each SAP E-Commerce user the mapping (user <=> sold-to-party) has been set up as described in the online documentation.
For example: SU01-User u2018500070u2019: Tx SU01 under 'references':   Obj.type u2018KNA1u2019 with key u2018500070u2019. A corresponding customer master record u2018500070u2019 can be found in the ERP system using transaction VD03.
In the shopping basket maintenance the following error message occurs: u2018No customer found with customer numberu2019.
In our testing system (SAP E-Commerce for ERP 5.0 (SP12) with SAP ECC 6.0 EHP0) everything is working fine. The problem only occurs in the customer ERP system (SAP ECC 6.0 EHP4).
Thanks for your help in advance.
Regards,
AEV

At the code there are some checks for the backend system. A normal ECC 6.0 gives there a version "700" back. If you have an ECC 6.0 with EHP4, that will give an other number back from backend system. I think "701".
At the Source-Code of ecommerce, there is no check for 701... Add that to the sourcecodes and it will work.
Example:
if (r3Release.equals(RFCConstants.REL46C) ||
                    r3Release.equals(RFCConstants.REL620) ||
                        r3Release.equals(RFCConstants.REL640) ||
                             r3Release.equals("701"))
Im not 100% sure about this because i had the same problem in ISA 4.0, not ecommerce 5.0.

Formel Variable - how to fill with Customer Exit from control table

Hello Experts,
I have create in BEx-Analyser a formel Variable ZEXRATE1 filled through Customer Exit. In BW I had a "control tabel" with keyfigures.
In the query definition I have include 0FISCPER, 0FISCVARNT and 0VTYPE. This
are the keys which should give the values for the selectstatement to select my keyfigure from the "control table" to fill ZEXRATE1.
If it possible to do with Customer Exit (CMOD -> RSR00001 -> ZXRSRU01) or do I have to implement a Bapi. Perhaps someone can give me a code example.
Regards Dieter

Hi,
Code may look like this
WHEN 'ZEXRATE1'.
check i_step = 2.
    LOOP AT I_T_VAR_RANGE INTO L_S_RANGE.
      CASE L_S_RANGE-IOBJNM.
        WHEN 'ZFISCPER'. GV_ZFISCPER = L_S_RANGE-LOW.
        WHEN 'ZFISCVARNT'. GV_ZFISCVARNT = L_S_RANGE-LOW.
        WHEN 'ZVTYPE'. GV_ZVTYPE = L_S_RANGE-LOW.
      ENDCASE.
    ENDLOOP.
    SELECT SINGLE RATE into INTO GV_RATE
              FROM ZTABLE
              WHERE 0FISCPER = GV_ZFISCPER
              AND   0FISCVARNT = GV_ZFISCVARNT
             AND 0VTYPE = GV_ZVTYPE   .
Assumptions : ZTABLE name of control table
                      ZFISCPER name of variable represents fiscal period
                      'ZFISCVARNT' name of variable representing fiscal year variant
                      'ZVTYPE'. name of variable representing value type
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Billing Document Number saved with Preceding Number from Number range...

Hi Everybody,
I am facing with some irregular problem which is as follows :
For example, Billing Docs created in the month of January was saved with number series like 10161, 10162, 10163 .....and so on....
But the user has creatd the document in February and it got saved with number like 10121......which is a preceding number and there is only one document like this....
The number range is Internal Number Range...even though it got saved with preceding number.
Can anybody plz tell me why this has been happened ?????
Proper answer will be rewarded....
Thanks in advance....

Hi Chaitanya,
Please check whether someone has changed number status in VN01 and previously 10121 was not used.
also check whether you are using ztable for number range depending upon plant.
Regards,

MD04 with PO number from SO

Hi friends
In my MD04 screen i am able to see the SO number /line item is it possible to show the PO number from SO .
Regards
Mahesh

Hi,
not able to see the PO number from SO.by useing MDo4 we can check the stock requirements.
regards,
dhanush

Problem with initial download from R/3 to CRM

Hello All,
Initial we were able to download & replicate all object from CRM to R/3 & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
Regards
Priyanka
Edited by: Rob Burbank on Dec 9, 2011 4:37 PM

Hello,
see note 588701:
"The queues are deliberately halted since the change of the logical
system name in the R/3 backend or the linking of new R/3 backend clients
to a client of the EBP/CRM Server with the same logical system name as a
client already linked to the R/3 backend would lead to severe data
inconsistencies in various CRM applications.
For this reason, such changes are not allowed on principle. The halting
of the queues prevents such data inconsistencies. The following
situations may lead to the queues being halted:
o The logical system of a client of an R/3 Backend system linked to
       the EBP/CRM server was changed in current operation.
o A new client of an R/3 Backend system or a client of a new R/3
       Backend system was linked to an existing client of the EBP/CRM
       server where the logical system name was already assigned to a
       client of an R/3 Backend system linked to the CRM server before.
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed
          in current operation. In this case, the data hangs in the
          outbound queues of the R/3 Backend system as specified under
          point 1 of the symptom. In this case, the logical system name
                                                                 Seite 2
must be changed back to the original value. Then the outbound
          queues can be reactivated. If no data was transferred to the
          EBP/CRM server before the change, also a correctioin of the
          check table is possible.
- The same logical system name was used again in a new client of
          an R/3 Backend system that was linked to the EBP/CRM server.
          In this case, the data is in the inbound queue of the EBP/CRM
          server with the exception GUID_FOR_LOGSYS_CHANGED. In this
          case, the queue entries which have status SYSFAIL must be
          rejected, however, not the entire queues. If the new client of
          the R/3 Backend system you have linked has exactly the same
          data as the old client and if it is meant to replace the old
          client (that is, this was deactivated), also a correction of
          the check tables is possible. In this case, the inbound queues
          can be reactivated after the correction.
The correction of the corresponding check tables or the correct
procecure in individual cases is to be agreed upon with the support of
SAP or SAP consultants at the customer site. In justified cases, SAP can
carry out the correction of the check tables.           "

Replicate customer contact from R/3 to CRM

All,
here is the scenario
I have downloaded customers from R/3 to CRM. Now I'm trying to download the contacts in customer account to CRM. When I go to relationships in CRM, I should be able to view the same contacts in R/3 for this customer
Settings
In CRM customizing data transfer setting for partner processing, I have AP already selected.
In R/3 there is no partner function assigned/ created for this customer but have a contact.
I tried to replicate this with Customer_Rel object KUNA1 table -- but didn't work
I tried to with the same object with table KVNK only for one single customer. It has been processing for ever...
I want to create the contact with the same number as BP instead of having different number for contact person.
Can someone please help me !!!
Thanks,
Sri

Ensuring that the number range of contact person is same in both R/3 and CRM - OSS note 564538.
Create function module : Z_CHANGE_CONTACT_GROUPING copying BUPA_MWX_BDOC_MAP_MAIN_CENTRAL
I hope this helps.
Gaurav

Replication of BP linked with Customer number from R/3 to CRM

Similar Messages

Maybe you are looking for