Replication of Business Partner to R/3

Hi,
The Business Partner has been creeted in CRM in roles :
Business Partner,
Sold-to-Party
Bill-to-Party
Financial Services BP.
The sales area data has also been maintained with values :
Sales Organisation : Region Europe
Distribution CHannel : Europe
Sales Area : 04
Sales Sub Area : 75
Sales Segment : 07
Commercial Organization : 2900
Updating Organization : 000400
While replicating the Business Partner from CRM to R/3 system the BDoc turns to red with error :
"Entry 0400 does not exist in - check your entry".
I have checked in the entire Business Partner Data and the value 400 is maintained only in sales area data as "000400" and nowhere else this value 0400 is present in CRM.
Please assist in clearing this error so that BDoc can be replicated to R/3 system.

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Similar Messages

Replication of Business Partner from ISU to CRM

Hello,
I am creating the Business partner through 'BP' transaction and it is getting replicating to CRM,
But when I am creating the Buiness Partner through 'Emigall' transaction it is not replicating to CRM.
Also I added the many fields like u2018TIME_ZONE, ADDR_DATE_TO, ADDR_DATE_FROM, TEL_CNTRY, FAX_CNTRY etc.u2019 in the structure of business partner in 'Emigallu2019 transaction,
and the business partners were created successfully in ISU, but it is still *not replicating in CRM*.
Please help me to solve this issue.
Regards,
Darshana

Hi Darshana,
1st step: Check SAP delivery: IS Migration -> Settings -> SAP Settings
CRM_REPL_OFF X X Deactivate CRM Replication (only IS-U)
2nd step: Check project settings (superseding standard setting): IS Migration -> Settings -> Customizing Settings
- if you can't find the parameter CRM_REPL_OFF: standard setting is valid
- if there is a parameter CRM_REPL_OFF: check whether what the parameter value is (space or X)
Kind regards,
Fritz

Replication of Business Partner Data from ECC to legacy

Hi,
My requirement is to replicate any changes made to Business Partner,should immediately get reflected in the legacy.
Which is the best method to follow.I am planning to use ABAP proxies instead of IDOCS.
As the replication needs to be immediate,Can I use ABAP Proxy.?
And for tigerring this proxy I need to enhance the code for Business Partner(BP) to call the proxy.
Is my approach correct or do I need to follow any other approach.
Regards,
Vinod Kumar.

Hi,
The approach should be based on the kind of data you want to upload in SAP. if you want to upload some standard process documents like Sales order/ purchase order then it will be good to use IDOC. As we have Standard IDOCs available in SAP to upload such document in ECC. In case you want to track the change in data from BP which is not part of any standard process then in that case you can go for ABAP proxy.
If you are using ABAP proxy you dont need to call it from BP. From BP the changes will be sent to PI (in the form of File/database Query/JMS Queues ..etc ). Then PI will call inbound proxy from ECC and post the data.
Please let me know if you have any other Qs.
Shweta.

Replication of Business partner and the Sales document from CRM to R/3

HI All ,
I am completely new to this CRM technical , I need some technical document on how can I replicate BP and sales documents from CRM to R/3 through CRM middleware .
Please help me out in this regard .
Regards
Debasri Sarkar

Hi Debasri
It would be best if you try the Best Practices available on [CRM Best Practices|http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_crm.htm]
Choose the CRM Version you are working on. On the next page that opens up, choose Technical Information-->Building blocks from LHS.
And you can use the Best practice guide titled CRM Master and Transaction Data Replication there to know more about BP and transaction replication between CRM and ECC.
Hope this would help You
Regards
Rekha Dadwal-Shet

Replication of Business partner from CRM to ECC.

Hi experts,
We are working on CRM 5.0 with backend ECC 6.0.
We are facing a problem while replicating BPs from CRM to ECC. Eventhough we are maintaining language code in CRM, the same thing is not replicating to ECC.
Can anybody help us how to solve this problem.
Thanks in advance.
Regards,
Madhu.

we have this issue on CRM006 consumers created as an org.
SAP gave us function module
'BUPA_OUTBOUND_BPS_FILL_CENTRAL' to fill the langauge in CRM 5.0 or BUPA_GENERAL_UPDATE .
We have not implemented either yet. in r/3 46C we have a small core mode in LVV02F3H to force EN as language.

Business Partner with Classification not replicated from CRM to ECC

Dear CRM gurus,
We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
Desperately need help! Points will be generously rewarded.

Hi guys,
most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
One standard stumbling block is the field "language key" under communication data....
I hope that's what is causing the problem
cheers
Jens

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

Business Partner Replication from CRM to R/3

Hello friends,
I am not able to replicate BP from CRM to R/3. When i create a business partner i see bdoc
in SMW01 with status in yellow colour and there is no error description. If i try to debug
the replication in foreground, i can see all the entries which i entered in CRM done in R/3,
but it stops at the Customer attribute screen(Additiona fields as seen in Extras in the task
bar) and doesnot goes further, even if i enter something it remains in the same state. As
per me the customer attribute field in not mandatory in R/3, i dint found the settings for
it in SPRO but logically if R/3 system allows me to save the customer without entering the
attributes then my thinking should be right.
Kindly give me some pointers to resolve this or please let me know the check points,
prerequisites for replication of customers from CRM to R/3.
Thanks & Regards,
Yogesh

Hi Yogesh,
Check the R/3 transaction OB20, Double clidk on "Create Customer (Centrally) "
Here we maintain the options for all the field e.g required / optional etc..
Reward points if it helps!!
Best regards,
Vikash.

Business Partner Replication Documents

Need Business Partner Replication Documents

http 403 basically indicates that your authentication towards HCI does not work proper. Please describe here how your authentication settings in the Communication Arrangement and on the corresponding IFlow is defined.

Business partner replication from ECC to CRM

Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, Dzmitry

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Business Partner with ID GUID is not an employee - HR Replication

Hi All,
We are on SRM 5.0 Server 5.5. Our SRM Org structure comes from R/3. We did an initial replication and everything worked. I am now manually trying to replicate selected positions and persons, and this is not working properly.
The position and person comes across however in PPOSA_BBP the central person is not automatically linked to the position. When I run HRALXSYNC on the CP, I get an error "Business Partner with ID <GUID> is not an employee". I have checked the BP and it is an employee; in transaction PP01 there is an Org. assignment (0001) to the position and org unit. I have checked the IDOCs and the relationship A008 seems to be coming across.
Does anyone have any suggestions as to what else I can check?
Thanks,
Paula.

Hi
Please go through this ->
The CP object is a technical object and represents the natural person. The CP is not transferred in the scenario "SRM standalone with ALE integration of an HR system". This means that the CP in the HR system and the CP in SRM systems are different objects. The number of the CPs in the SRM system in this case is not significant, but when the CP is created, the system tries to assign the number of the first personal number (contract) to the object.
See related SAP OSS Notes, which will definitely help ->
Note 920185 - SRM 5.0: No CP<->BP consistence check in BBP_BP_OM_INTEGRATE
Note 763403 Assign existing (SU01) users to (ext.) employees
Note 875015 No attributes found for service agent
Note 309909 - R/3 HR connection: Link user / position
Note 1046808 - Business partner validation
Note 934372 - SRM/CRM: HR integration for business partner - new features
Also see this ->
During the business partner replication from purchasing systems to SUS, the following error occurs in an XI interface: "An exception has occured. E:R11: 124 - Business partner with GUID &1 does not exist"
Note 726212 - SRM40-SUS: Business partner - correction for SP00
Related Notes
Note 922181 - SRM-SUS: Mail notification not send from 'BBP_SUS_BP_ADM'
Note 849217 - SUS-MM: Vendor replication leads to error
Do let me know.
Regards
- Atul

Business Partner replication

Hie Guys, we have a problem with Business Partner relations replications.
Problem is, When a ship to party has sold to party assigned in R3, this relationship is not being updated in sold to party's relationship in CRM. how ever, Ship to party's relationship has been updated.
I checked the properties of Relationship catogory has the Ship-To PArty/Recipient and Is the Ship-To Party/Recipient Of which are WELL MAINTAINED
I checked ADAPTER settings, Admin console settings, and aso OSS note 0000452349.
Can anyone guess what could have been the problem? Iam having to sycronise manually relationships everyday. (r3ar2). Please sujjest me to have it updated automatically.
Thanks and regards,
dinesh.
Edited by: Dinesh reddy on May 7, 2009 10:57 AM

Hie,
Could you please be specific?
Thanks and regards,
Dinesh.

Business Partner Replication to SAP ERP- ping getting error

Hi,
i'm configuring the Business Partner Replication to SAP ERP ,while ping im getting(Checking connection failed).
please refer the image below.
Could you please give me the suggestion.
Regards,
Prasad

http 403 basically indicates that your authentication towards HCI does not work proper. Please describe here how your authentication settings in the Communication Arrangement and on the corresponding IFlow is defined.

Business partner replication using ABAP proxy

Hello,
I want to send vendor master data records from the MDM to SAP SRM. There is a standard ABAP proxy interface in the SRM for this purpose and this proxy is also being used by the standard PI content for MDM.
Do you have any experience with this interface? I have done some test cases and I missed the logging. In PI I don't get any feedback if the business partner has been created or not. And in case it was not, there is no detailed error description. Neither in SXMB_MONI in the PI nor in the SXMB_MONI in the SRM.
Is there any other monitoring tool for this interface?
Would you recommend to use this interface in production, or would you prefer to use the BAPI interface?
Any comment appreciated.
BR,
Jürgen

Hi Jürgen,
yes I worked on a similar scenario, we were distributing customers to CRM, which is the dual of vendors in SRM, and at the end is just a different role of the business partner.
The Proxy I used is the standard proxy ABABusinessPartner, which is part of the standard content, and we never had problem using this object (productive since more than a year).
What is strange to me is that you do not see any trace in SXMB_MONI, you should see the message in both XI and SRM and when a message is in error you should see the trace there with a description of the issue.
Regarding Acknowledgement I think you have to configure MDM to request an acknowledgement since the ack only comes back if the first sender of the message request it.
Hope this help.
Ciao,
Sergio

Replication of ERP-Orders: Business Partner (Carrier) is not specified

ERP 2005 / CRM 2007
Sales Documents (orders) are replicated from SAP ERP to SAP CRM 2007 with the following error message in CRMD_ORDER: 'Business Partner (Carrier) is not specified'. 'No Business partner was entered for partner function Carrier.'

Hello André,
This simply means that in CRM in your partner determination procedure, that is linked to your transaction type, the partner function 'Carrier' is listed as obligatory (actually the minimum occurence is set to at least 1, thus meaning obligatory/required). If you edit your partner determination procedure and look for the Carrier partner function in it, set the 'Minimum occurence' to blank (no value). After this the partner function is no longer obligatory/required and the error message will no longer appear for all transaction types that use that partner determination procedure.
Of course, it could be that you really need this partner function but then you have to check your customizing settings is R/3 and make the corresponding mapping of partner roles (R/3) and partner functions in CRM.
Hope this helps,
Kind regards,
Joost

Replication of Business Partner to R/3

Similar Messages

Maybe you are looking for