Replication of Equipment from R/3 to CRM

Hi Experts
I am writing because i have a problem in the replication of the equipment from R/3 to CRM.
I can replicate the equipment well, but some information is missing in the transfering. Example:
In R/3. Tx. IE03, The tab SerData have the Customer Number.
I need to transfer that number to CRM.
In CRM. Tx. IB53, i can see my equipment replicated, but there is no information about the customer number.
Please help on this issue
Points rewarded
Thanks

Kindly check the partner function whether that partner function of customer in ECC, is defined in CRM. If it is not defined then it will not copy to IBase while data transfer.
Reward points if helpful.

Similar Messages

Replication of customers from R/3 to CRM

Hi everybody,
After completion of Initial Download of data from R/3 to CRM ,the customers replicate crm.
But my doubt is once we do initial download then the customers which are in R/3 in bulk are replicated to R/3.But there are few customers which are still replicated from R/3 daily.
So I want to know the reason for this replication even though after the initial download is completed.
please help me.
regards

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Replication of data from r\3 to crm and difference between crm 4.0 & 5.0

can any one help me in how data like bp. transactions and conditions data replicated from r/3 to crm and if u can provide me with some doccuments
thanks and regards
rajesh
[email protected]

Hello Rajesh,
as I said in the other Post you should not ask to documentation send by mail. Please have a look at:
<a href="https://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes SAP CRM 5.0</a>.
Regards
Gregor

Replication of employee from R/3 to CRM

Can anyone send me the document about the steps to replicate employee from R/3 to CRM ? My email address is [email protected] . Thanks in advance.

It is done by using ALE.

FM Call in BADI during replication of BP from R/3 to CRM causes problem

Hello all;
I am trying to change the BPKIND of the partner in CRM which is created in R/3 with the PARTNER_UPDATE BADI. But the FM called in the BADI causes the BP hang in SMW01 with intermediate state. May you please advice me somthing about this?
METHOD if_ex_partner_update~change_before_update.
DATA: lt_but000_old           TYPE STANDARD TABLE OF but000,
         lt_but000_new           TYPE STANDARD TABLE OF but000,
         ls_but000_new           TYPE LINE OF bup_but000_t,
         lv_objnr                TYPE crmt_object_guid.
CHECK sy-uname = 'ERP_RFC'.
CALL FUNCTION 'BUPA_GENERAL_CALLBACK'
    TABLES
      et_but000_old = lt_but000_old
      et_but000_new = lt_but000_new
    EXCEPTIONS
      OTHERS        = 0.
READ TABLE lt_but000_new INTO ls_but000_new INDEX 1.
ls_but000_new-bpkind = '0001'.
REFRESH lt_but000_new.
APPEND ls_but000_new TO lt_but000_new.
INSERT but000 FROM TABLE lt_but000_new.
* CALL FUNCTION 'ZBBP_BUP_UPDATE'
**    TABLES
**      t_but000 = partner_attrib.
ENDMETHOD.

Kindly check the partner function whether that partner function of customer in ECC, is defined in CRM. If it is not defined then it will not copy to IBase while data transfer.
Reward points if helpful.

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Data in Equipment Download from R/3 to CRM

Hi,
I have just performed an equipment download from R/3 to CRM. I now have these records created as individual objects assigned to an installed base. However my equipment record in R/3 has some partners related to it (sold to party), I have checked the partner determination in R/3 and created one in CRM with the same partner functions and assigned it to the product category used for the Equipment download. However even though I the equipment records are downloaded into CRM as individual objects successfully I do not have any related partners for the installed base or individual object.
Has anyone replicated R/3 equipment records into and got their partners relationships replicated too successfully.
I have the post Creation of individual object in crm but there is no mention of partner determination in there.
Any help would be most appreciated.
Regards

For the warranty replication, you'll have to do some programming in CRM using BADI CRM_EQUI_LOAD.
Use method ENLARGE_COMPONENT_DATA.
Create warranty link
DATA: it_interlinkage_to_create TYPE crmt_il_ibcwty_maint_ext_tab,
        is_interlinkage_to_create TYPE crmt_il_ibcwty_maint_ext,
        lv_object_guid            TYPE comt_product_guid,
        lv_object_reference       TYPE crmt_il_wty_reference,
        ls_prwty                  TYPE crmm_prwty,
        ls_product_id             TYPE comt_product_id,
        ls_warranty_guid          TYPE comt_product_guid.
    ls_product_id = 'STD_WAR_1Y'. "Default warranty product
SELECT SINGLE product_guid FROM comm_product INTO ls_warranty_guid
         WHERE product_id = ls_product_id.
is_interlinkage_to_create-warranty_guid = ls_warranty_guid.
is_interlinkage_to_create-start_date    = ls_comp_det3-valfr.
is_interlinkage_to_create-end_date      = ls_comp_det3-valto .
is_interlinkage_to_create-determine_dates = 'X'.
INSERT   is_interlinkage_to_create INTO TABLE it_interlinkage_to_create.
lv_object_reference = '02'.
LOOP AT it_ibap_struc1_tab INTO is_ibap_struc1_tab.
    lv_object_guid = is_ibap_struc1_tab-guid_compc.
ENDLOOP.
DATA: it_messages     TYPE comt_il_error_tab,
        it_interlinkage TYPE crmt_il_data_ibcwty_tab.
CALL FUNCTION 'CRM_IBCWTY_IL_API_CREATE'
    EXPORTING
      iv_object_guid            = lv_object_guid
      iv_object_reference       = lv_object_reference
     iv_timestamp              = l_timestamp
      iv_enqmode                = 'E'
    iv_raise_exception        = 'X'
      iv_save                   = 'X'
      it_interlinkage_to_create = it_interlinkage_to_create
    IMPORTING
      et_messages               = it_messages
      et_interlinkage           = it_interlinkage
    EXCEPTIONS
      error_occurred            = 1
      OTHERS                    = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The reason for this is that warranty is a relationship in CRM and part of your equipment in R/3.
I'm still looking for the documentation on the partner replication can anybody help me on this?
Regards,
Jacques Dokter

Serial Number Replication from R/3 TO CRM

Hi Experts,
Currently the Equipments are replicating from R/3 to CRM. If we want to replicate only Serial Number as Individual Object , will their be any effect on the equipment already replicated to CRM or what will be the effect of replicating Only Serial Number with out equipment.
We are working in 6.O version.
Can u please reply for this message ASAP.........
regards,
Sarangamath
Edited by: Sarangamath on Dec 7, 2011 10:53 AM
Hi Experts,
Can you please reply on this issue - Its Urgent
Regards,
Sarangamath

Hi Kalyan;
You can define different number ranges in R/3 and CRM.
As per my understatnding number ranges maintained in R/3 is 0000000001-ZZZZZZZZZZ which is already exist in CRM.
You can try following steps
1. Define new number range ( as an ext no range)in CRM as per your requirement (which is not used in CRM)
2. create new groupings then assign number range in to grouping.
3. Then go to R/3 and change the number ranges for BP as a internal number ranges
4.Goto T.Code PIDE there select R/3 to CRM. and enter the mapping details with new number ranges then start downloading.
If helps reward the points.
Regards
Jameem Khan.
TTL Mumbai

Scheduled delta replication from R/3 to CRM

Hello Experts,
we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
And the delta down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
thanks in advance.
regards,
kalyan

Hi Kalyan,
If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
Example:
Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
As you reassign the subscription, the following inconsistencies occur:
Business object 111111 has not been synchronized in the R/3 back-end.
Business object 222222 is not available in the R/3 back-end.
And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
Regards
Nadh.

BP Replication from R/3 to CRM

Hi Forum,
I am facing an issue with BP Replication from R/3 to CRM.
Although the same scenario and configuration works well on my dev and qual environment and the same has been trasported to Production, apart from that R3 dev and qual system are completely updated with Prod data as on date so there is no question of any mismatch at the data level and config level.
The following are the error messages am receiving in SMW01 for BUPA_MAIN:
1. Business partner with GUID 36F36B473D31C04985CC8AEB314C6BE3 does not exist
2. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
Now none of my BP are flowing to CRM because of this issue.
Appreciate any pointers for the resolution.
Regards,
Amit

Hi Vikash,
The RFCu2019s have been checked for authorisation test, remote logon n local logon. The RFC user is a dialog user and is working well for all logon. I have also checked both the systems they have the logical names as described by you (source & destination both).
Another thing that validated my point regarding the connection setting is that the materials are flowing fine between the system and even the changes in these materials are replicating properly hence the delta for material is also fine.
The Inbound and Outbound queues have been deleted from both r3 and crm and the only job running again at the moment is customer_main.
Regarding you concern for the queue R3AI* it has not been generated even once whenever I have started the initial load. Right from the starting I am monitoring R3AD* in all the outbound and Inbound queues of both the systems.
The sysfail message is coming for R3AD queue hence I think it is of no use to us. Still if I follow the error message it points towards SMW01 and there the error message is the same as described in the 1st message.
I have just noticed 2 BP that have come in CRM as STP but its been hours after that no BP is flowing in.
Now I am eagerly looking out for the final findings that we are going to get from the system when the issue is resolved.
Thanks again and appreciate the efforts taken from your end.
Regards,
Amit

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Deactivate replication of contact persons from R/3 to CRM

Hi,
i'm replicating customer relationships from ECC6 to CRM2007. All fine, including z-partner functions etc.
One thing Im baffled by however is the replication of contact persons. Contact persons will be created in CRM only, without any integration/replication with ECC6. Since there are existing contact persons in the ECC6 master, I want to deactivate that replication.
So I hae deleted the mapping for master data transfer in CRM in the IMG under Basic Functions => Partner Processing => Data Transfer => Distribution of Partner Functions from SAP ECC into CRM
and Distribution of Partner Functions from CRM into SAP ECC.
But if I create a contact person in ECC6, it STILL replicates through to CRM!! Any ideas how to de-activate that replication? I don't want to end up with failed BDOCs in the middleware if posible.
regards
Jens

Hi Srikanth,
thanks a lot for your reply. However the approach needs to be a bit more sophisitcated than that. I do replicate through a number of r?3 partner functions into relationships in CRM, e.g. ship-to and 3 z-functions (promary CSR etc.). That all works fine and needs to stay that way.
However I do need to deactivate the replication of the R/3 contact persons to CRM.

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Customer Master replication error from R/3 to CRM

Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JD

Pls see Customer Master replication error
Closed.

Replication of Equipment from R/3 to CRM

Similar Messages

Maybe you are looking for