Replication of few Plants(Locations) from SAP R/3 Backend system
Hi All,
Some of the plants which has been created in SAP R/3 Backend System but they are not visible in Enterprise Buyers Portal Production System.
In order to get the missing plants replicated to EBP System shall I run the program
BBP_LOCATIONS_GET_FROM_SYSTEM or any other program i have to run,please advise.
Thanks in advance.
Regards,
Pranab
Hi Pranab,
In order to replicate the selected plants from R/3 to EBP. Run the report (SA38)
BBP_LOCATIONS_GET_SELECTED in SRM
In order to replicate all the plants then ru the report BBP_LOCATIONS_GET_ALL.
Award points for suitable answers.
Rgds,
Teja
Similar Messages
-
Automatic Replication of Vendors from SAP R/3 Backend System to SRM System
Hi All,
I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
I have checked in the SPRO settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also" under Vendor Synchronization with Make Global Settings I hope.
If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
Awaiting for your early reply .
Regards
AnnetteHi
Please try this ->
<b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
Regards
- Atul -
How to get Plant address from SAP R/3 to SRM
Hi Gurus,
We need to retrieve the plant address from SAP R/3 to SRM and display it in the output list of the report (SRM).
Suggest any standard FM or should we need to create a Custom Remote enabled FM and put the select query to get the address.
Regards
PaulHi Paul,
Try using the RFC_READ_TABLE function module...
Pass the table name as t001w which contains the plant details.
Hope this helps.
Thanks,
Pradeep -
Replicating storage locations from SAP SRM
Dear Experts,
How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
Thanks and regards,
RanjanHI Ranjan,
Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
thanks,
Rahul Mandale -
IORDER01 IDoc is sent without plant code from SAP ECC
Hi MEINT experts,
Does anyone experience before on the service order integration between SAP ERP and SAP ME, somehow the IORDER01 IDoc is sent over with empty plant code embedded in the original document? (where we suppose to see <WERKS> data tag is attached to the IDoc sent over from SAP ECC). This has resulted to the corresponding IDoc is not able to process by MEINT due to empty plant code.
Please advice how to resolve this if you have done that before.Hi,
Once the issue stems from ERP side of integration process, this question should be either re-posted to ERP-related forum or submitted as a customer ticket against PP-MES component.
Regards,
Sergiy -
Loadind data from SAP ECC 6.0 system
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
the status is getting u201Cyellowu201D (194 from 0 records)
at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Thank you very much!
regardsJgen,
check the t-code BD87 in BW and see if there is any IDOC pending...try to manually execute them.
Its a connection issues as the IDOC's are not getting exchanged between the system.
may be you are running out of processes and your job is just waiting.
check the partner files as well in WE20 and see if everything is OK.
take the help of your SAP basis team as well.
Also check whether user ALEREMOTE exists in the source system in R/3 and give him all the authorization.
check if the authorization objects like S_RFC and B_ALE_REC are assigned to its role.
Also check if the authorization profile is S_BI-WX_RFC.
check this thread and check the ALEREMOTE part.
http://help.sap.com/erp2005_ehp_04/helpdata/DE/ab/4c69f832429f419fa6f216c83dccb0/content.htm
Ajeet -
Loadind transaction data from SAP ECC 6.0 system failed
Hi!
I have SAP ECC 6.0 IDES system with the following clients:
100 DEV client
200 BI client of SAP 6.0
Now I would like to load the transaction data from InfoSources 0FI_AR_6 and 0FI_AR_4 from SAP ECC client 100.
The extraction process has been frozen in status "yellow" and after a while changed the status to "red" with the following information
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
The users BWREMOTE and ALEREMOTE seems to be ok and have the suitable authorization.
The tcode SM58 does not show any entries.
The tcode BD87 shows that the IDocs was sent (source system) and has been received on target system.
Question:
How can I solve my problem? Please give me some technical information (tcode, report).
Thank you very much!
regardsWalk through your basis set up and check out
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
pts appreciated. -
In B2c - How to Pass Additional Data from UI to the Backend Systems in SAP?
Just wondering in SAP b2c how can I set/transfer data from UI to the back end database/SAP after confirmation step?
Edited by: Sayed Ahmed on Jul 27, 2008 6:47 AMHi,
Just use extension data methods to send the data to backend systems.
This method is clearly mentioned in the above links.
If you want to send the data to a new function module then follow this process.
[How To Call Function Module in E-Commerce|https://wiki.sdn.sap.com/wiki/display/Snippets/HowToCallFunctionModuleinE-Commerce]
and
[How To Import and Export data to Function Module|https://wiki.sdn.sap.com/wiki/display/Snippets/HowToImportandExportdatatoFunctionModule]
Regards,
Sateesh Chandra -
Site(Plant) details from SAP IS Retail ECC 6.0 to XI
Hi,
Which is the idoc to send Site(Plant) details to XI, which is created in ECC 6.0 T.Code WB01, & hw to send the same to XI.
Rgds,
balajiclosed
-
Read data from SAP R/3 Class-System
Hello,
first of all sorry when I posted this into the wrong subforum, but I wasn't sure about that. My Question is how to read data from the Classystem I have specified in my ABAP report.
The goal is to read data from my individual class-system as well as data from MM and write them to a table that is to be read by another report. But right now I can't find information about the class system and abap. Maybe you know some tutorials or blogs about right that topic you can suggest?What class system have you specified in your report?
Normally a class can be used by declaring a variable of type of the class in question, if this class can be instantiated this is. If your class can't be instantiated, but it has only class methods, you can call this method directly.
But there is a lot more to this ABAP Object Oriented Programming, than just this short explanation. Search on SDN for some ABAP OO Tutorials.
some links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
Transacation ABAPDOCU. -
Unable to send IDOCs from SAP PI 7.3 system to a NON-SAP system
Hi Experts,
We have a simple file to IDOC scenario in our SAP PI system. There is no mapping as the file is already in the IDOC-XML format.
However , the target system is a NON-SAP system. We are using a TCP/IP RFC destination to connect to it.
Here are the settings we have done,
1) Creates a 3rd party technical system and business system in SLD.
2) We have assigned a logical system name for the business system (LSKABA100).
3) Created a port in IDX1 with the same name LSKABA100 and assigned the TCP/IP RFC destination. The RFC destination is pinging fine.
4) Imported the metadata for the IDOC from a SAP port and copied the same to LSKABA100 port.
5) Created the sender agreement, receiver determination, interface determination and receiver agreement in ID.
When we send the file, there is an error on SM58 transaction of our PI system. It says "RFC_ERROR_SYSTEM_FAILURE: IDocException occurred."
Other than that it does not provide a lot of details.
We have seen this thread and this blog but did not get any break through.
Please help us, if someone has any ideas.
Best Regards,
Ravikanth TalaganaHi all,
I am not using any SAP Jco user either in my config or in the RFC destination.
What is the user id that needs to have the authorization?
I am using a TCP/IP RFC destination and it does not have any user id/pwd.
There is also, no problem while doing a connection test to the RFC destination.
Best Regards,
Ravikanth Talagana -
Commitment Interface from SAP to third party system!
When we created Purchase Requisition or Purchase Order, the commitment will be created. The third party system needs to track the commitment. So SAP needs to send the commitment to the third party system by this interface.
But when the Goods have been delivered, the commitment will be zero out and the actual will be posted to SAP. SAP needs to send the offsetting records to the third party system. In this way, the third party systems knows that how much commitments have been reduced.
My problem is that I cannot find the right table to record the offsetting entry. In the table COSP, I can identify the commitment by the Business Transaction -- RMBA and RMBE. But it did not record the offsetting entry. It just becomes zero when the goods have been delivered. But I have nothing from that table to send to the third party system.
Does anyone meet this problem before? Can you share some experience on this?
ThanksHi ,
As pointed ...above you can for a file to file scenario you can create just the Business service in integration Directory and create two file communication channels for sender and reciever under it.
However if it was file to idoc or file to rfc ..
then you need create ts web as abap ..identifying your R/3 system
System Name: <you can give a 3 character id here of r/3 system ...i.e like IDS>
System Home : <can be found in status of R/3 system>
Installtion Number : In transaction Slicense in R/3
Host Name : Same as System home can be specified.
Message Server: <3600+instance Number can be found in the log pad to the r/3 system itself >
associate a bussiness system with this ...create a product and a software component version ...In swcv in respository ..develop your object under it ...
Import this business system in Configuration ..and create your communication chanel under it.
Regards ,
Deepak -
All VF01 Invocie from SAP to 3rd Party System
Dear Experts,
I am trying to send customer invoice to an external system via PI with IDoc type INVOIC02. I have done the basic setting for the output type ZRD0 to transfer the document via. EDI.
I have created a partner profile for Logical System u2013 SYSCLNT100 (LS) in WE20 and have given the outbound parameters with the message type INVOIC.
These are the settings for my partner profile:
part type: LS
msg type: INVOIC
Outbound Options: Receiver port: A000000050 (tRFC)
Packet size: 1
Transfer IDOC immediately
basic type: INVOIC02
Message Control: Application: V3
Msg type: ZRD0
Process Code: SD09
When the output is manually triggered in VF01
Goto Header Output
I manual add ZRD0,
Partner type - LS
Partner u2013 SYSCLNT100 & Language - EN
The system given error message u2018Maintain EDI partner profile for SYSCLNT100u2019
When Condition Record is maintained in VV31
Billing type - F2
Partner u2013 SYSCLNT100 & Medium - 6
In Billing VF01, the Condition Record is ignored with error message ''SYSCLNT100u2019 is not an EDI partneru2019
We are sending the Invoice to 3rd party system and not the Customer (KU); hence we would like to maintain WE20 for the Logical System. All the Invoice's generated in the system should be sent to a fixed 3rd Party system, please advice
With Regards,
KarthikHello Max,
Yes, the partner LS for the output type is already maintained in NACE.
With Regards,
Karthik -
How to develop portal application connecting to SAP R/3(backend system)
Hello Everyone,
Can anyone guide me on how to create portal aplication(JSPDYNPAGE), that will connect to backend SAP R/3 system, & it will fetch the data from some table from that R/3 system. Any reference material will be appriciated, it will be of great help.
Thanks
Chetan.Hi Chetan,
Connection to R/3 systems through Portal can be done in many ways. Since you have mentioned that you are using jspdynpage then its better that you use JCo for connecting to R/3 system.
U can write the JCo code using the jspdynpage component. I hope you have pdfs related to JCO. Incase u dont have then give me you mail id. OK
Another approach could be developing a web dynpro java application that access a r/3 table using a BAPI. You can a dynpro model to easily connect to R/3 system.
Just develop an iview based on this web dynpro application. And finally navigate to this iview through your jspdynpage.
I hope this helps you in some way
Regards,
Prasanna -
How to make Portal Application for connecting to SAP R/3(backend system)
Hello Experts,
I need to create a portal application that should connect to SAP R/3 & fetch some data in some table according to some input parameters provided at runtime & display the data in TABLEVIEW control.
Anyone can guide me on this i:e- how to go about it. What things i should know or should be aware of before creating this application. Any PDF documents , any help material, any guidance about the same will be of great help.
Thanks,
ChetanChetan,
Webdynpro & Visual Composer ars EP Development Tools.
If you only display BAPI data then go for Visual Composer with requires no coding So I suggest you to go for Visual Composer.
You can also use Webdynpro Java or ABAP to display BAPI data by creating
Adaptive RFC model.
You will integrate Webdynpro applications into EP by creating SAP Webdynpro iView.
*Visual Composer Documents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/0af7d34a8449e2b722878ce270a747/frameset.htm
*Webdynpro Documents:
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9f
ea07/frameset.htm
Regards,
<b>Ramganesan K</b>
Maybe you are looking for
-
How can I sync my iPhone to a new PC without losing app data?
My laptop has died completely and no back up. I am not concerned with music or photos as they're all online somewhere. I do have a couple of apps with data on them which I cannot lose if I sync my iPhone with iTunes on a new laptop. Will my data be l
-
How can I print the iCloud calendar on mt PC (windows 7)
Does anyone know how to print the monthly calendar in iCloud. I can view it,but don't know how to print it. Thanks
-
Hi all. I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012. Thanks. Regards.
-
Web Photo Gallery limit in Bridge CS5
I searched the forum before posting but couldn't find an answer. I tried to create a Web Gallery in Bridge (Photoshop CS5) and it limits me to 20 photos. Does anyone know how to overcome this limit?
-
Pretty much the title can not detect my apple tv2 through my early 2001 macbook pro that i just installed mountain lion. Im even have a apple time capsule thats both connected to these two device. My Itunes detects the apple tv and even tested itunes