Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Similar Messages

How to get Classes of Functional Location and Equipment

Dear Experts,
I would like to know how to get all the classes in Classificaition of Functional Location and Equipement, FM ITOB_GET_CLASS_STANDARD is only get 1 class, how do I get all declared classes inside classification?
Any table or FM?
Thank you.
Regards,
Weng

Weng,
Table KLAH would give you all the available classes for every class type.
FM CLAF_CLASSIFICATION_OF_OBJECT would get you all the assigned classes of a particular type for a object.
Regards
Narasimhan

Cost Center Linkage between Functional Location and Equipment.

Hi Gurus,
We have found in our analysis that it is impossible to copy the cost center of a superior functonal location to a subordinate one when the cost center of subordinate functional location is changed manually.
We intend to do a mass change for our cost centers of all our functional locations and equipments for all our plants. We need to know how do we achieve this change of cost centers.
Thanks:
Siddharth

Thanks All for your information.
Actually the Master data team has to do a mass update of cost centers for the Functional locations and Equipments.
And what we have found is that when we change the cost center for an equipment individually it changes the cost center origin of the equipment to "D" which means independent of the changes in the cost center at FL level.
Be it IBIP or any other way what we have found that the linkage(cost center origin) between the FL and the EQUIP changes to "D" when ever we change the cost center for the equipment.
We don't want to change this linkage as it may have other consequences that we can not foresee at this point.
So, my question is :
If the FL and EQUIP linkage (cost center origin field) is changed(from H to D or D to H), what could be the effect on the FL and EQUIP relation?
Cost center origin :
D Independent of changes in cost center at FL level
H It is dependent on the FL cost center.
Thanks:
Siddharth

Extension functional location and equipment master data

Hi,
We have around 200 functional location (having 3 structure indicators) and 10,000 equipments (Having external number range) on a controlling area and on different company codes.
Several orders have been created by this data and now company wants to change controlling area, company codes, maintenance plants and planning plants with having old data in the same system server and client.
I want to know is it possible to create same codes functional locations and equipments on new maintenance plants and planning plants having new company codes and controlling area? (It has observed that once we assign maintenance plant, the system automatically picks company code and controlling area and these fields become highlighted and can't be changed) OR
Is there any possibility to use old data in orders with reference of new plants company codes and controlling area?
What will be the end solution, should I create the new structure indicators for functional locations and new equipment names that must not be matched with the old equipments?
Regards,

Hi,
Thanks for prompt reply,
a) If we change permanently then you mean to say the old master data record will remain in the system with all old transaction data, please confirm?
**b)Alternatively, can I create same (exactly like old codes) functional locations and equipments codes on new maintenance plants (having new company coded and controlling area)?**
I will have same client and server for the whole scenario
Please reply soon
Best Regards,
Edited by: PROCESSES EXPERT on Jun 29, 2010 8:36 AM

Functional Locations and Equipment List?

In structure list - is it possible to see (recognize by sight - without opening-checking each piece) which Functional Locations and/or Equipment units are active/inactive?
Here is example of strctural list, opened via IW21 transaction.
Any naswer/idea(suggestion is Welcome.

Zeljko Vasilik,
Add the System-Status field into the Structure List(s) via menu path: Settings->Field Selection
PeteA

Replicate customer and vendor from ECC to CRM

Hi experts,
Is it possible to replicate customers and vendors extending the same BP in CRM?
If i had one customer in ecc that is a vendor too, can I configure or implement some badi in middleware to replicate changes to the same BP in crm?
Best regards,
Caíque Escaler
Edited by: Caíque Escaler on Jan 12, 2011 4:57 PM

If I recall from my ECC days, this field is used for back to back orders i.e. Sales Order creating a back-to-back Purchase Order. As such, there is no relevance for this data within CRM, so I would not expect it to be maintained there. It only has relevance within ECC (Sales & Purchasing).
Mark

Custom data for equipment load from ECC to CRM 7.0

Dear All,
Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
Thanks & Regards
DB

Hi,
You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from ECC to CRM are downloaded.
For more details jut go through
http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
Best Regards,
Rajendra

Partner data from Functional Location to Equipment

Dear Expert,
How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
Is there is any other way to transfer partner data while assigning Equipment to Functional Location.

Hi,
Functional Location:
Define field selection for partner data fields : Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
Define field selection for partner data fields
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
The Partner tab should be visible in the equipment
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
Assign equipment category to partner determination procedure
Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
Regrads
bharat

Equipment Replication from ECC to CRM 6.0

Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.

Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!

Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

PP Work Center ------ PM Functional Location, PM Equipment

Hi,
For a given PP Work Center , I want to have the table where details of PM Functional Location & PM Equipment are stored, in which the PP Work Center is used.
Thnx,
Shivaa.

Hi Shivaa,
Go to T.Code : SARA and giving archive object : PM* + press F4 you will get the following
Try with the following tables:
PM_EQUI    Equipment
PM_IBASE   IBase
PM_IFLOT   Functional Locations
PM_IMRG    Measurement Documents
PM_MPLAN   Maintenance Plans
PM_NET     Object links, master data
PM_OBJLIST Serial Number History
PM_ORDER   Service and Maintenance Or
PM_PLAN    Routings
PM_QMEL    Maintenance Notifications
From the above list click the suitable one and press database table tab. You will get all the relevant database tables.
Here you go...
If it is useful reward points
Thanks
Saravana
Edited by: K Saravana Kumar on Jul 30, 2008 8:25 PM
Edited by: K Saravana Kumar on Jul 30, 2008 8:26 PM

Table which link functional location with equipment number

Hi,
Can you please tell me the name of the table which link functional location with equipment number.
I want to get the list of equipment installed at given functional location.
Regadrs
Anil Kumar

Ooops, yes Vinay is correct: EQUI -> EQUZ -> ILOA
Here's some example code:
select single * from equz where equnr eq g_equnr
and datbi eq '99991231'
and eqlfn eq '001'.
select single * from iloa where iloan eq equz-iloan.
PeteA
[www.pjas.com]

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

Replication Z-Tables from ECC to CRM

We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM, anybody have any information about this.
Thanks in advanced
Sebas

Hi Sebas,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
You can also try this
1. Create the Ztables both in ECC and CRM
2. create customizing adapter objects in R3AC3.
3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
4. create a variant and shedule the based on requirement
Thanks and regards,
Madhukar Reddy

Replication of functional location and equipment from ECC to CRM.

Similar Messages

Maybe you are looking for