Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

Similar Messages

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Material Updates from ECC to CRM

Hi Experts,
We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
Regards
Charitha

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Problem in delta changes from ECC to CRM for Customers created in CRM systm

Dear all,
I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
Your suggestions are highly appreciated.
Best regards
Raghu ram

Hi Shanthala,
Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
Kinldy help me to resolve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

Replication of Plant data from ECC to CRM

Hello Experts,
Kindly require your assistance in the following requirement:
I have replicated the quotes from ECC to CRM. However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
I have followed the Note 493947 but in vain.
Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
Kindly request your guidance on this.
Regards,
Venkat.

Hi Venkat,
'Delivery Plant' field doesn't exist in CRM data model. Please refer to note note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
field doesn't exist in CRM.
Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
Best regards
Christophe

Replication of Product Attributes from ECC to CRM

Hi Experts - Is there any standard functionality in CRM which serves same as Product attributes of ECC.
In ECC, Product attributes 1 to 10 can be used as an indicator to check whether the ship-to party accepts the attributes of a product. During sales order creation system will give a warning or error based on product attributes of ship-to party and material.
Let us know, if this functionality supports in CRM.
Thanks,
Sree

Hello,
I have exactly the same question. Did you find out if it is possible?
I haven't found anything in the standard doc , si I guess these ECC product attributes don't have an equivalent in CRM, meaning we should use customer specific fields on ECC side and product "attributes" (in the sense of attributes of customized set types) on CRM side.

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Delta Replication for Customizing object from ECC- CRM

I need help on delta replication activate for customizing objects from ECC to CRM. I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL. What business transaction do I need for those so the delta will work for them too? Rewards points if helpful

I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Changes are not updated from ECC to CRM How to debug

Hi,
QCs 1140049726 and 1140047459 were updated in P20 system to remove the WBS. This was done per normal P20 process and instructions. P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
CSP still shows these QCs as having a WBS assigned to them. This is incorrect. It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
How to proceed with it. How to debug from ECC to CRM.
Prem.

Hello Prem,
Could you please have a look at SAP note 656823?
This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
Hope this could be helpful.
Best regards,
Maggie

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

When transferring HR data from ECC to CRM via change pointers

When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advance

Hi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik

Business partner replication from ECC to CRM

Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, Dzmitry

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Replication of Material Changes from ECC to CRM

Similar Messages

Maybe you are looking for