REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Similar Messages

  • Replication of Material Changes from ECC to CRM

    Hi All,
    I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
    So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
    Please can any one help me.

    Hi
    Do you get any sysfail in the inboud queue (and / or a dump in st22)?
    Do you get any errored bodcs?
    If yes which error message ID and Number?
    Best regards
    Christophe

  • Material Updates from ECC to CRM

    Hi Experts,
    We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
    Regards
    Charitha

    Hello Charitha,
    In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
    for your RFC destination (ECC).
    This would prevent any automatic data flow for this object from R/3 to CRM.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Replication of partner function from ECC to CRM

    Hi experts,
    We are working on CRM 5.0 with back end ECC 6.0
    In our scenario we are creating sales orders in ECC and replicating it to CRM.
    Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
    Is there any way by which we can populate this ?
    Points will be rewarded for suitable solution.
    Regards,
    Madhu

    hi
    just mainatining partner function wont be enough ,you need to do two things
    1. mapping of BP function between CRM and ECC
    2. specify the path from ECC to CRM so that they can be replicated successfully
    so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
    this is the path where in distribution you need to specify the path
    and maintain there the mapping between the R3 and CRM
    RFC destination should be CRM and source is ECC
    best regards
    ashish

  • Replication of Plant data from ECC to CRM

    Hello Experts,
    Kindly require your assistance in the following requirement:
    I have replicated the quotes from ECC to CRM.  However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
    I have followed the Note 493947 but in vain.
    Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
    Kindly request your guidance on this.
    Regards,
    Venkat.

    Hi Venkat,
    'Delivery Plant' field doesn't exist in CRM data model. Please refer to note  note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
    field doesn't exist in CRM.
    Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
    Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
    Best regards
    Christophe

  • Access Material Master from ECC 6 via PI

    Hi everyone,
    I am very new with SAP PI. I hope someone here could give me a guidance. I am trying to access the material master data from ECC 6 via SAP PI using web service. Is there any document for step by step instruction that I could follow?
    It is much appreciate that someone could give me some hints.
    Thanks,
    Chris

    Hi,
    Check this link IDoc To Web Service Scenario
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
    There is no weblog on IDOC to webservice. But u can have a look at blogs on RFC to webservice.
    Then using above given Steps + weblogs u can build ur scenario.
    /people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
    /people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
    Thanks!
    Edited by: monica bhosale on Aug 26, 2011 10:08 AM

  • Replication of Product Attributes from ECC to CRM

    Hi Experts - Is there any standard functionality in CRM which serves same as Product attributes of ECC.
    In ECC, Product attributes 1 to 10 can be used as an indicator to check whether the ship-to party accepts the attributes of a product. During sales order creation system will give a warning or error based on product attributes of ship-to party and material.
    Let us know, if this functionality supports in CRM.
    Thanks,
    Sree

    Hello,
    I have exactly the same question. Did you find out if it is possible?
    I haven't found anything in the standard doc , si I guess these ECC product attributes don't have an equivalent in CRM, meaning we should use customer specific  fields on ECC side and  product "attributes" (in the sense of attributes of customized set types) on CRM side.

  • Replication of Customer and Material master from R/3 to CRM

    Hi
    Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
    I went to B09 BB document and all settings are fine.
    Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
    I went to R3AM1 and checked the status as running or wait for each object.
    There are no filters in R3AC1 .
    Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2  .
    What can i do to resolve this problem.
    Please advice.
    Thanks,
    Vaishnavi

    Hello Vaishnavi,
    After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
    You can run this txn in test mode as well to see the affected tables.
    Are you getting any dump on these load ?Check it in txn:ST22.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Replicating of Material Master from ECC6.0 to SRM 5.0 in real-time

    Hi,
    I saw the URL on the steps to replicate Material Master from ECC to SRM:
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    It requires to run transaction r3as to load the material.
    Can I check do we have to do this step periodically to pull material master from ECC?
    Is there anyway to have a real-time RFC whenever the material is created or changed?
    Thanks!
    WEi

    Hi all,
    Thanks for the answers. Has anyone successfully sync the new material creation to SRM after initial load by configuring the delta?
    What is the exact function module / Bdoc / idoc that sync the material master to SRM?
    If we want to cusomize our own filter criteria like exlude certain material groups and include only material starting with certain numbers, how can we do that?
    Thanks!
    Regards,
    Wei

  • Downloading Material Master data from ECC to CRM

    Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

    Hi Rghunandan,
    To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
    First download the customizing objects using R3AS
    DNL_CUST_PROD0 u2013 Material number conversions
    DNL_CUST_PROD1 u2013 Product : Categories
    DNL_CUST_PROD3 u2013 Material : R/3 sales status
    DNL_CUST_SPROD u2013 Sales product item
    DNL_PLANT - Plant
    To download products foll the steps below
    1.Defining Product ID Settings  -COMCPRFORMAT
    Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
    This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
    The material master length is R/3 is defined in transaction code OMSL and is set to 18.  (also check note no. 545824)
    2.Make sure that CRM item categories and R/3 item categories are the same.
    In CRM, item categories and item category groups are seen via
    Customer Relationship Management  Transactions  Basic Settings
    3.Selecting specific objects for replication : R3AC1
    Use adapter object MATERIAL
    Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
    4.Replicate Materials : R3AS
    mention the adaptor object Material and execute
    Regards
    Itty

  • How to transfer Material Master data information from ECC to CRM

    Hi ,
      Changes to the Classification data of Material master for the class type-001 and Custom
    ZFIELDS on mara will trigger the Interface functionality. Any changes to the
    custom zfields and  classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
    Regards,
    Pavan

    Hi,
    You need to use change pointer to do this. Go to transaction SALE,
    expand MODELLING AND IMPLEMENTING...
    expand MASTER DATA DIST...
    expand REPLICATION OF MODIFIED DATA
    You may need to maintain distribution model in SALE.
    Cheers.
    Reward if useful

  • Replication of Quotations from ECC to CRM

    Hello Experts,
    The scenario is as follows:
    I am required to replicate all the quotations from ECC to CRM.
    My question is: what are the various middleware settings to be done?
    I have created a transaction type for quotation by the same name in ECC and CRM so far.
    It would be great if I can get help on the following:
    1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
    2.What action profile do I need to maintain on ECC and CRM side for quotation?
    3.How should the number ranges be defined on ECC and CRM side for quotation?
    4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
    5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
    6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
    What more needs to be done?
    Once the settings are complete and fool-proof,  I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
    What are the filter settings to be maintained in SalesDocument Object?
    Experts, this is my requirement and all the pointers would be greatly helpful.
    Many thanks,
    VSK.
    Edited by: venkatskumar on Feb 16, 2011 12:17 AM

    Hello
    Please find below my reply :-
    1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
    >> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
    2.What action profile do I need to maintain on ECC and CRM side for quotation?
    >> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
    3.How should the number ranges be defined on ECC and CRM side for quotation?
    >> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
    4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
    >> Yes
    5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
    >> Not sure on this. Requesting other experts to answer this.
    6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
    >> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
    Hope this will be helpful.
    Regards

  • How to replicate material master from R/3 to CRM

    Hi guys,
    I am trying to replicate material master from R/3 to CRM using BAPI_MATERIAL_SAVEDATA but no changes are getting replicated to CRM.
    Any help..??
    Thanks,
    Sid

    Hi find below for the product cat
    Steps to create the product category in SRM:
    1)       Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2)       Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3)       Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Equipment Replication from ECC to CRM 6.0

    Hi Gurus,
    I am trying to Replicate equipments from ECC to CRM 6.0
    I did all the activities as specified still encountering issue while replicating.
    I did following activities
    1) Default settings
    OLTP-EQ-0401-0401-X(Delta)
    2) BADI - CRM_EQUI_LOAD_STDIMP    (Activated)
    3) Specify adapter object for uploading objects
    0401 - DNL_EQUIPMENT
    I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
    A) I checked SMQ1, SMQ2 - No Queues are blocked.
    B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
    C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
    I checked the BDOC Message for the passed lines in SMW01 it says
    1) Start of Initial load.
    2) No Objects were selected.
    In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
    Please correct me if I am following a wrong process or forward me the check list for Equipment load.
    I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
    Please advice.
    Thanks,
    Sharath.

    Hi Sharath,
    I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
    I have done the following steps:
    1. Created a category for the object family 0401 and assigned the relevant set types to it.
    2 Maintained the settings for downloading equipments into CRM at:
    SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
    3. Activated BADI CRM_EQUI_LOAD
    On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it.  When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
    Would appreciate if you could share how did you solve your problem.
    Thanks in advance for the help!

  • Uploading material master from R/3 to CRM problem

    Hi Experts,
    I am new to the Middleware
    I have downloaded the material master from R/3 to CRM but I am not able to see the downloaded products in CRM.
    I have checked the queue of R/3 there is no error.
    I even checked the queue of CRM there is no error.
    When I see in SMW01 the status is green and
    BDoc. Error message is showing “Mat. for Initial Download: Function table not supported”
    Can anybody give me suggestions?
    I will reward the points

    i have checked the filters
    i have down the following settings
    Request Name     MATERIAL
    Table Name       MARA
    Field Name       MATNR
    Incl/Excl      Inclusive defined set/array
    Option           Greater or equal then (>=Low)
    Low              a1(r/3 material no.)
    even thin i did not get the result
    i have the same error that is
    "Mat. for Initial Download: Function table not supported"
    help me out it is very urgent

Maybe you are looking for