Replication of Material Sales status (with user values) from ECC to CRM

Hi all,
I 'm trying to find out how to replicate the sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA) to the Material SAles statuses in CRM.
The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
But, now, how can i replicate the sales statuses of the ECC materials to either :
-the product status (header) in CRM, or
-the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data ?
Is a specific development needed?
there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
thanks a lot

It seems that there is no mapping between ECC and CRM sales area.
If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start down load from ECC.

Similar Messages

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Material Variant of a Config Material to take Charac. Values from Sales Ord

Hello Guys,
Is there any way to have a Material Variant for a Configurable Material to take the Characteristic values from a Sales Order instead of Material Master ?
I understand by default Material Variant has fixed characteristic values and is taken from material master......
however here is the situation am in.......
I have a completely MTO scenario where we will making the product from scratch only after we know the characteristic values.......however our Costing Guys want to do standard cost estimate for the Configurable Material somehow......they were able to do Cost Rollup by making the Configurable Material itself as the Material variant of itself (assigning the same Configurable Material # in MRP3 view)............however this broke my design of taking characteristics from the Sales Order...because the Configurable Material is now behaving as Material Variant and taking the default characteristic values from the Material Master....
Note: Our Costing guys donot want to cost settlement at Sales Order level.
Regards,
BRN.

I had exactly the same problem. (configuration "blocked" in SO because the use of material variants for PC purposes...)
SAP help says : To allow you to change the configuration of material variants in the sales order, the Configuration allowed or required indicator must be set in Customizing for Sales and Distribution. The requirements class is determined using the strategy group and requirements type defined in the material master.
The req. class parameter, mentioned not very clearly by the SAP help, that allows changing the characteristic values of a material variant during the SO configuration is V_T459K-KONFI and value must be either * or +
Hint: A quick check can be done In the SO entry: go to the procurement tab and replace your requirement type by KEL, you'll see that configuration is "open"
Hope this helps
Iñaki
Edited by: InakiGonzalez on May 11, 2009 8:08 PM
Edited by: InakiGonzalez on May 11, 2009 8:15 PM

System Status Vs User Status updates from ECC to CRM

Hi Frnds,
    Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
   (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
          I have assigned this Status to INProcess and Released , with my 'Z' Status.
I have Maintained the Same User Status Profile in ECC also.
My questions are
1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
2)When ever i change the status in ECC that Status as to be update in the CRM?
        But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.
        Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
   Helpful Answer will be Rewarded with Points .
Thanks in Advance
Reagards
Ram

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Urgent : transfer of custom fields of a sales order from ECC to CRM

Hi,
We have a sales order which will be created in CRM and replicated to ECC.
We have added some custom fields in table VBAK, which we are displaying in the sales order additional data tab B. When the user saves the sales order,we need to transfer the fields back to CRM.
We are aware of the the BADI CRM_DATAEXCHG_BADI.
Also i think we need to conisder the structure BAPIMTCS but not sure how exactly we can use it.
On the CRM side these Z fields exist in the structure BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H of the method CRM_DATAEXCH_R3D_MBDOC_FILL.
Can someone guidde us on how exactly do we transfer the value from ECC VBAK-Z* to CRM value BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H.

Hi Sameer,
Thanks for the document.
I tried doing the same steps recommended(in the document it was for a customer). However i dont think my values from the ECC side are being passed to the CRM side.
I created a new Z structure and passed it via BAPIMTCS, but on the CRM side when i tired retrieving my Z structure,i dont think the system found it.
There are 2 BAPITCMS structures, t_table_info and the other t_bapistruc.
Do you know which one we need to fill up?
Thanks,
Neil.

Mapping of field from ECC to CRM - DChain-spec. status field

Hello,
In my current assignment we will be downloading all the master data from ECC to CRM. For a particular requirement, we need a field in COMMPR01 in CRM from material master MM03 in ECC.
Field Location: MM03> sales:sales org1>DChain-spec. status
Please find below technical infomation for that field ( ECC)
Field Data:
Table Name: MVKE
Table category: Transparent table
Field Name: VMSTA
Data Element: VMSTA
Field Description for Batch Input
Screen Field: MVKE-VMSTA
Program Name: SAPLMGMM
Screen Number: 4000
Please help me in locating the same field in CRM (COMMPR01)
Regards,
Vipul

Hi Vipul
Please implement note 1494159. This should doanload this field as well then.
Best regards
Christophe

Replicating Quotation overall status from ECC to CRM

Hi,
we're using quotation management replication scenario A in ECC6 and CRM 5.
when the quotation is referenced to sales order in ECC, the overall status becomes "completed" in ECC. but somehow, the overall status of the quotation in CRM remains "not processed".
is there anyway i can get the overall status in ECC replicated to CRM for Quotation Management?
Regards
JD

Hi Susana,
i got reply from SAP mentioning that this is standard behavior. unless i replicate the referencing sales order document from ECC to CRM, then the CRM quotation system status won't be set to completed whenever it is referenced to sales order in ECC. we do not have any business need to have the sales order in CRM, but that's the way it is.
Regards,
JD

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

Replication of Plant data from ECC to CRM

Hello Experts,
Kindly require your assistance in the following requirement:
I have replicated the quotes from ECC to CRM. However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
I have followed the Note 493947 but in vain.
Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
Kindly request your guidance on this.
Regards,
Venkat.

Hi Venkat,
'Delivery Plant' field doesn't exist in CRM data model. Please refer to note note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
field doesn't exist in CRM.
Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
Best regards
Christophe

Sales area missing after Product download --ECC to CRM

Dear SDN team,
Im facing a issue after downloading few products from ECC to CRM using Middleware .
The Products have been download successfully , but the Sales area for Product is missing in CRM system .
I have correctly mapped the ECC sales area to CRM in txn PPOMA_CRM and also enabled the u201CObj permitted for distributionu201D for the Sale Org in CRM
I have also downloaded all customizing settings related to Products and Sales areas.
Can someone please help me here ? Is there any customizing settings I need to make in CRM or change the Products in ECC??
Please help here
Regards,
Dinesh Rao

Hi Shalini,
Thansk again , but the problem is not resolved yet .
I creating a dummy product in ECC with correct Sales area details ( as mainatianed in CRM as well) and downloaded this product from ECC to CRM.
But still the sales area is missing for the Product !!
I checked the BDocs as well and there are no errors here as well
What could be the problem ??
Please help
Regards
Dinesh

Replication of Material Sales status (with user values) from ECC to CRM

Similar Messages

Maybe you are looking for