Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

Similar Messages

Problem in passing customer Partner Functions from ECC to CRM

Hi to all, I am facing the following error in the crm system
1.Partner 0000080059(DCEAB7AC31DA22F1B7CE001372368B21): the following errors occurred
Message no. BUPA_MW_EXCHANGE010
2.Status exists already for this business partner
Message no. CRM_BUPA_FRG0050012
3.Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
My scenario in ECC is: I use a custom BTE copy of VMD_VENDOR_BTE_1421_IMPL which is executed when I save a new vendor. In this BTE I use the FM SD_CUSTOMER_MAINTAIN_ALL to create a customer with the same attributes as the vendor, because only customer informations (not vendor informations) pass as Business Partners in CRM. The problem is that when I pass only master datas to the FM SD_CUSTOMER_MAINTAIN_ALL, the customer passes to CRM as a Business Partner with the same number, but when I pass also Partner Functions to FM SD_CUSTOMER_MAINTAIN_ALL, no Business Partner is created in CRM, and the error I get is that up.
What can I do?
Thank you very much,
Antonio

Hola Antonio,
I have a same problem.
You can tell me the solution.
Please.

Replication of Partner Function from CRM 5 to ECC6 Issue

Hi experts
Is someone able to assist with pointing me in the correct direction to resolve a partner function replication issue please. We create all entities/BPs in CRM, and replicate them to ECC.
We have a custom partner function, ZF, that is held against Payer and Sold-to in ECC. This is a separate entity in CRM, but is sent according to relationship assignment to ECC. We have noticed that this partner function is not being updated correctly.
Scenarios:
Ending a relationship between Account/Customer (Payer/sold-to in ECC) and the Farm (ZF partner function) - the ZF partner function is removed in ECC. This is correct behaviour.
New Account or Customer creation in ECC with ZF relationship assigned, ZF partner function is being created in ECC. This is correct behaviour.
HOWEVER, when adding a new ZF relationship in CRM to an existing Payer/Sold-to, the ZF partner function does not get created in ECC. This is incorrect behaviour - new valid relationship should trigger ZF partner function in ECC.
Also, name changes to the ZF maintained in CRM, is not being updated in ECC for existing relationships. Instead, the Partner Function tab, ZF type, displays the old name for the Farm.
BUPAREL bdocs are being created and sent to ECC, however something is happening on the receiver end. How do we trace this, and does anyone have any ideas on where to start to find out what is happening here?
Many thanks
Cara

Solved, internal issue usage tab not being completed correctly so not assigning partner function

Does SRM support Vendor Partner Functionality from ECC?

Does SRM support or sync up with Vendor Partner functions in ECC such as OA, VN, PI, etc.?
Initial look at SRM does not suggest that SAP has made it easy to replicate partner functions in SRM.

Hi,
See these related threads:
Partner function Payee in SRM
Adding Partner Function to R/3 PO from SRM in Classic using BADI
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

Replication of Plant data from ECC to CRM

Hello Experts,
Kindly require your assistance in the following requirement:
I have replicated the quotes from ECC to CRM. However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
I have followed the Note 493947 but in vain.
Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
Kindly request your guidance on this.
Regards,
Venkat.

Hi Venkat,
'Delivery Plant' field doesn't exist in CRM data model. Please refer to note note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
field doesn't exist in CRM.
Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
Best regards
Christophe

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Replication of Product Attributes from ECC to CRM

Hi Experts - Is there any standard functionality in CRM which serves same as Product attributes of ECC.
In ECC, Product attributes 1 to 10 can be used as an indicator to check whether the ship-to party accepts the attributes of a product. During sales order creation system will give a warning or error based on product attributes of ship-to party and material.
Let us know, if this functionality supports in CRM.
Thanks,
Sree

Hello,
I have exactly the same question. Did you find out if it is possible?
I haven't found anything in the standard doc , si I guess these ECC product attributes don't have an equivalent in CRM, meaning we should use customer specific fields on ECC side and product "attributes" (in the sense of attributes of customized set types) on CRM side.

Replication Of Z Partner Functions from CRM to ECC

HI All,
We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
So can some onle please tell me how to do this?.
Thanks in Advance,
Arun

1. Create the partner function in ECC
2. Assign the partner function to the relevant partner procedure in ECC
3. Create a partner function in CRM
4. Map the partner function as follows:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from R/3 into CRM
Create the following entry:
Partner function in R/3 Function
and also the below:
Create a mapping entry for data transfer from CRM to R/3 via the
following IMG activity in CRM:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from CRM into R/3
Create the following entry:
Function R/3 function Type in R/3

Business partner replication from ECC to CRM

Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, Dzmitry

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Delta Replication for Customizing object from ECC- CRM

I need help on delta replication activate for customizing objects from ECC to CRM. I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL. What business transaction do I need for those so the delta will work for them too? Rewards points if helpful

I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

Replication of partner function from ECC to CRM

Similar Messages

Maybe you are looking for