Replication of PO data in ECC Scenario

Hi All,
I need to transfer custom fields created in the PO Items tab in SRM ECC Scenario.
SRM System: 5.0
R/3 System: ECC 6.0
I debugged while transfering the PO data, and found that system is not calling any of the BADI's displayed below.
1. BBP_CREATE_BE_PO_NEW
2. BBP_CREATE_PO_BACK
3. BBP_ECS_PO_OUT_BADI
I am unable to put break poing while debugging at the FM 'BAPI_PO_CREATE1'
Can any one help me to transfer the custom data.
(Systems is replicating the standard data from SRM to R/3)

Hi,
You can find which function modules are called in SRM when creating the PO in the backend ERP system by looking into table BBP_FUNCTION_MAP. You need to specify the PO object value and the backend type (ERP_2.0 for ECC 6).
To debug any background function modules like BAPI_PO_CREATE1, define an implementation in any of the Implicit Enhancements points. Add some code to force a indefinite loop and then via SM50 debug the program.
Hope that helps,
Jerry

Similar Messages

Replication of Plant data from ECC to CRM

Hello Experts,
Kindly require your assistance in the following requirement:
I have replicated the quotes from ECC to CRM. However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
I have followed the Note 493947 but in vain.
Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
Kindly request your guidance on this.
Regards,
Venkat.

Hi Venkat,
'Delivery Plant' field doesn't exist in CRM data model. Please refer to note note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
field doesn't exist in CRM.
Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
Best regards
Christophe

Document/customer pricing and replication of pricing data from r/3 to crm

Hi,
can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
once it is replicated to crm what customization is require in crm.
tel me abt customer and document pricing procedure, how it will be effected in the transactions.
plz any one help me to know this scenarios.
thanks
kumar

Hello Sathish,
Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
Easwar Ram
http://www.parxlns.com

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Master/Transaction data from ECC to APO-BW

Hi All,
     Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
Regards,
Joy

Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
    Data Flow Process: 1. Info Package
                                  2. Info Source
                                  3. Info Cube
                                  4. Transformation between DS & IS, Then IS & IC
                                  5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay

BPC:NW - Best practices to load Transaction data from ECC to BW

I have a very basic question for loading GL transaction data into BPC for variety of purposes, would be great if you can point me towards best practices/standard ways of making such interfaces.
1. For Planning
When we are doing the planning for cost center expenses and need to make variance reports against the budgets, what would be the source Infocube/DSO for loading the data from ECC via BW, if the application is -
YTD entry mode:
Periodic entry mode:
What difference it makes to use 0FI_GL_12 data source or using 0FIGL_C10 cube or 0FLGL_O14 or 0FIGL_D40 DSOs.
Based on the data entry mode of planning application, what is the best way to make use of 0balance or debit_credit key figures on the BI side.
2. For consolidation:
Since we need to have trading partner, what are the best practices for loading the actual data from ECC.
What are the typical mappings to be maintained for movement type with flow dimensions.
I have seen multiple threads with different responses but I am looking for the best practices and what scenarios you are using to load such transactions from OLTP system. I will really appreciate if you can provide some functional insight in such scenarios.
Thanks in advance.
-SM

For - planning , please take a look at SAP Extended Financial Planning rapid-deployment solution: G/L Financial Planning module. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is free to licensed customers of SAP BPC. This RDS leverages the 0FIGL_C10 cube mentioned above.
https://service.sap.com/public/rds-epm-planning
For consolidation, please take a look at SAP Financial Close & Disclosure Management rapid-deployment solution. This RDS captures best practice integration from BPC 10 NW to SAP G/L. This RDS (including content and documentation) is also free to licensed customers of SAP BPC.
https://service.sap.com/public/rds-epm-fcdm
Note: You will require an SAP ServiceMarketplace ID (S-ID) to download the underlying SAP RDS content and documentation.
The documentation of RDS will discuss the how/why of best practice integration. You can also contact me direct at [email protected] for consultation.
We are also in the process of rolling out the updated 2015 free training on these two RDS. Please register at this link and you will be sent an invite.
https://www.surveymonkey.com/s/878J92K
If the link is inactive at some point after this post, please contact [email protected]

Pulling of Exchange Rate data from ECC to BI

Hi All,
we are having an requirement to pull TCURR Table Exchange Rate data from ECC to BI.
If anybody worked on this scenario could you please share valuable inputs regarding this.
I gone through this SDN forum link: Re: Automated Exchange Rate Loading in BPC NW ( please share some more details regarding this )
Regards
Amit

Hi All,
I hope this will help you to pull Exchange rate data from ECC Table : TCURR to SAP BI System.
ECC Steps : Creation of generic datasource
1) Create generic Transaction Data source Using TCode : RSO2 with name ZTCURR and then press create Button.
2) Input Applic. Component: FI-GL and give description.
3) Input View/Table: TCURR and Press save Button.
4) This will take you to extract structure of data source ZTCURR. In this structure select respective field from the selection field option (In future we will use it in BI info package) and then press save button.
5) Use Tcode: RSA3 to check the data by giving custom data source ZTCURR name.
Note:In this case we are extracting full data from TCURR table. If your project demands you can use delta specific field.
SAP BI 7 Steps
1) Go to BI system, TCode: RSA1--> Source System-> Replicate metadata, then you can see generic data source "ZTCURR" in your BI data source tree.
2) Maintain Info cube Structure same like table : TCURR,
ECC Field      ECC DATA TYPE                               BI Field     BI Data Type
KURST     CHAR                          -
>                 ZKURST     CHAR (Length 4)
FCURR     CUKY                          -
>          ZFCURR     CHAR (Length 5)
TCURR     CUKY                          -
>          ZTCURR     CHAR (Length 5)
GDATU     CHAR                          -
>          ZGDAT      CHAR (Length 8)
UKURS     DEC                             -
>          ZUKURS     NUMBER ( Key Figure )
FFACT     DEC                             -
>          ZFFACT     NUMBER ( Key Figure )
TFACT     DEC                             -
>          ZTFACT     NUMBER ( Key Figure )
=========================================================================================
3) Conversion of default format "YYYY/MM/DD" to "YYYYMMDD".
In Transformation: "GDATU" is number format, not date format, so we need to write start routine in transformation.
With the Help of below code you can convert default format
"YYYY/MM/DD" to "YYYYMMDD".
DATA: DATE      TYPE CHAR10,
          L_INDEX   TYPE SY-INDEX.
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
    L_INDEX = SY-TABIX.
    CALL FUNCTION 'CONVERSION_EXIT_INVDT_OUTPUT'
      EXPORTING
        INPUT = <SOURCE_FIELDS>-GDATU
      IMPORTING
        OUTPUT = DATE.
    CONCATENATE DATE+6(4)
                DATE+3(2)
                DATE+0(2)
    INTO <SOURCE_FIELDS>-GDATU.
    MODIFY SOURCE_PACKAGE FROM <SOURCE_FIELDS> INDEX L_INDEX TRANSPORTING GDATU.
ENDLOOP.
Note : Customize above ABAP code according to your client requirement.
==============================================================================================
4) Calculation of Month End Rate----> Means last working day of month
Please refer below solution ( sent on 3rd June 2011 ) to calculate Month Rate
Go to BI transformation and write formula in ZGDAT field. In this case add GDATU as source field of rule and write below formula.
*Last working day of month Formula *    :             LAST_WORKINGDAY_MONTH( GDATU, '' )
Last working day is calculated based on the data maintained in the ECC TCODE : SCAL ( SAP Calendar )
==============================================================================================
5) CALMONTH calculation: conversion of YYYYDDMM format   to YYYYMM format.
This below given ABAP code helps you to convert GADTU: YYYYDDMM format   to CALMONTH : YYYYMM format.
In BI transformation write field routine in CALMONTH field to display date in this YYYYMM format.
DATA : L_GDATU TYPE tys_SC_1-GDATU.
CLEAR L_GDATU.
CONCATENATE SOURCE_FIELDS-GDATU0(4) SOURCE_FIELDS-GDATU4(2)
            INTO L_GDATU.
RESULT = L_GDATU.
Regards
Amit
Edited by: amit_sap_n on Jul 20, 2011 1:54 PM

Transfer z-table data from ECC to CRM via Middleware

Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
André

Hi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta

Integrating Data From ECC to CRM

Hi Experts,
My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
Problem: to map the data from ecc to CRM , I am supposed to call this RFC Fm ( existed in CRM side) from ECC using RFC Destination.
to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
Thanks & Regards.
Naga Priyanka. T
Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde

Organization data from ECC to CRM

Hi Experts,
We need to download organization data from ECC to CRM, and our requirement is to download two different kinds of org structures, sales org structure and HR org structure. Could you please advise whether this is possible in the system and also if it is possible please advise how to download this.
Currently we are using ALE to download employees into CRM and transporting org structure in CRM systems from golden client.
Thanks&Regards,
Kumar.

Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde

Send data to ECC table through RFC Call function from SAP B1 via b1if

Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
Thanks

Solved by my own.

Can we download employee data from ECC to CRM using standard middleware?

HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PV

Standard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda

Goods Receipts data from ECC 6.0 to APO system

Hello Team
Good day to you. Now i have the below requirement.
1. From legacy system i am getting Goods Receipt data and i want to create GRs in ECC system. for this i found a relavent bapi (ie BAPI_GOODSMVT_CREATE). please correct me if i am wrong.
2. As soon as GRs gets create in ECC system, i want to push this data to APO system for udpates. -- > so for this requirement i want to know is there any user-exit/badi exists in which i can write a code to trigger the RFC function module which takes data from ECC system and updates into APO system or is there any other way to perform this task. please suggest me on this.
my Interface landscape is as below.
Legacy system -
> ECC system -
> APO sytem
i want to push GR data from legacy system to APO sytem as mentioned in the above two steps. so requesting you to please suggest the solution accordingly.
Thanks in advance.
REgards
RAj

Hi Mario
Thank you very much for your detail explanation. But i think i have put a wrong question to you, i am so sorry for this. i am very new to this process. so i am putting my requirement and the options suggested below. so i request you to please check and suggest me accordingly. In Option 3 what is the BADI i need to use and what is the process to follow to complete my option 3 which is suggested. your suggestions will help me a lot.
Thanks in advance very much.
My requirement is below with the options suggested are given below.
Design Decision and Options
Description
Describe the problem which requires a decision to be made.
In the current design for Phase 1 go live, goods receipts from production will be generated through interfaces I608 (when production is receipted in PRISM) and I622 (when production is receipted via OPUS). This will update the stock levels in the ECC system. As the Core Interface (CIF) between ECC and APO will be active, the stocks will also be updated in APO.
In APO, the production orders will not be reduced by the confirmed amounts until the PRISM to APO interface (I642) runs overnight. Until the production orders are reduced there will be double counting in APO leading to incorrect planning and GATP results.
*Options(
List the options that have been considered as potential solutions
Option 1: Increase the frequency of the current PRISM to APO interface.
Option 2: Build additional Interface between PRISM & APO for production confirmations.
Option 3: Build enhancement to ECC GR to update APO production orders.
Option 1: Increase the frequency of the current PRISM to APO interface
Describe the pros and cons of option 1
Pros
No change to system design
Cons
Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
Interface method requires deletion/creation of production orders in APO which will cause issues for APO users
Option 2: Build additional interface between PRISM and APO for production confirmations
Describe the pros and cons of option 2
Pros
Interface method of updating production orders will not cause issues for APO users.
Cons
New interface
Development work required in PRISM to feed new interface
Significant potential for issues with synchronous timing between Goods Receipts in the ECC system and Production Orders from PRISM to APO
Delay between GR from OPUS and production confirmation from PRISM to APO
Option 3: Build enhancement to ECC GR to update APO production orders.
Describe the pros and cons of option 3. If only 2 options, then delete this section. If more than 3 options, then add further sections.
Pros
Ties the APO production confirmation to the ECC goods receipt, mimicking phase 2 scenario
Will not cause issues for APO users
Removes timing issue between goods receipt and production order confirmation
Cons
New development.
Assumptions for Proposed Development:
Utilise available BADi upon posting of goods receipt
Will generate qRFC that will run Production Confirmation BAPI in APO
BADi executes in update task of goods receipt
Interface for goods receipts will contain PRISM production order number
Recommended Decision
State which option is recommended as the decision, and the reason why this option has been recommended.
Option 3: Build enhancement to ECC GR to update production orders in APO.
Regards
Raj

Issue in transfer of data from ECC to APO

Hi All,
I have a requirement of transferring data from ECC to APO. I am using EXIT_SAPLCMAT_001 fro this purpose. The problem is, I need to transfer the data of a field that is not present in cif_matloc but present in /sapapo/matloc.
How should I proceed...Please help....this is an urgent requirement
Thanks & Regards,
SriLalitha

Hi,
you may want to go to the transaction /SAPAPO/SNP_SFT_PROF
Determine Forecast of Replenishment Lead Time
Use
In this field, you specify how the extended safety stock planning determines
the forecast of the replenishment
lead time (RLT). The following values are available:
Supply Chain
The system determines the RLT forecast using the supply chain structure by
adding the corresponding production, transportation, goods receipt, and goods
issue times. If there are alternative procurement options, the system always
takes the
longest
option into account.
Master Data
The system determines the RLT forecast from the location product master
data.
Master Data/ Supply Chain
First, the system determines the RLT forecast from the location product
master data. If no RLT forecast can be determined, the system determines the
forecast using the supply chain structure (as described under
Supply
Chain
Dependencies
You can retrieve the replenishment lead time forecast yourself by using the
GET_LEADTIME
method of the Business Add-In (BAdI) /SAPAPO/SNP_ADV_SFT.
Replenishment Lead Time in Calendar Days
Number of calendar days needed to obtain the product, including its
components, through in-house
production or external
procurement.
Use
The replenishment lead time (RLT) is used in the enhanced methods of safety
stock planning in Supply Network Planning (SNP). The goal of safety
stock planning is to comply with the specified service level, in order
to be prepared for unforeseen demand that may arise during the replenishment
lead time. The longer the RLT, the higher the planned safety stock level.
Dependencies
The field is taken into account by the system only if you have specified
master data or master data/supply chain in the RLT: Determine
Forecast field of the safety stock planning profile used.
Hope this helps.
The RLT from ECC is in MARC-WZEIT which is transferred to APO in structure /SAPAPO/MATIO field CHKHOR.
May be if you maintain the setting in the profile, you may get the value in RELDT.
Thanks.

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Replication of PO data in ECC Scenario

Similar Messages

Maybe you are looking for