Replication of Public Folder data from Exchange Sp1 to Exchange SP2

I have one Exch 2010 SP1 server and I am migrating to another Exch 2010 SP2 server. I am looking to migrate the old public folder data to a newer public folder database on the SP2 server. I have gone into Public Folder Management and added the
new server as a replication partner in properties of the folder, under "Replicate content to these public folder databases". After doing this, I don't see any replication occurring from the 2 servers. I turned on diagnostic logging on
both and I don't see any errors being created, just seem like nothing is happening.
What should I look for to troubleshoot this further?
Thanks in advance.

Hi JoeyC,
From your description, I would like to clarify the following things for troubleshooting:
1. Make sure that Mail flow is working between two servers.
2. Please refer to the following article to confirm that the configuration is right.
Configure Public Folder Replication
http://technet.microsoft.com/en-us/library/bb691120(v=exchg.141).aspx
What's more, here is an article about scripts to move public folders to a different database or server for your reference.
Move Public Folder Content from One Public Folder Database to Another Public Folder Database
http://technet.microsoft.com/en-us/library/bb331970(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

How do I export public folder data from inactive exchange server?

I have migrated from SBS2003 (old) to SBS2008 (new)
Used migration wizard / answer etc... All went well, expect for the public folders; which failed.
Question: How do I retrieve the public folder information from the OLD (inactive) server and import it to the NEW server?
The OLD server has been removed from the domain. I have backups of the OLD server and its original hard drive; where the public store info is located.
I tried PDDAVAdmin.exe; did not work for me.
All help is greatly appreciated.
Bill

Hi Amit,
I did as Zoltán said; searched the Internet for edb recovery tools and found a number of companies and Software Products which might help. I also considered your option as well but I have limited experience with building a recovery server and it sounds time consuming.
Our office is small we have 10 users; we keep contact lists in the public folders. I want to restore the contact lists from the inactive source server to the active destination.
I believe the process is called "rehoming" (from the web -- "In a Windows environment, rehoming is the process of moving public folders from one Exchange server to another. It involves the creation of a replica of the public folders on the target destination server, waiting for replication to complete, and then removing the public folders from the original source server.")
Background:
We have two servers FHHSERVER (the source, SBS2003) and FHHSERVER2 (the destination, SBS2008).
I used the SBS2008 migration wizard. The important stuff in the exchange database transferred ok; all emails, schedules, tasks, notes, etc. Everything appeared to work; including public folders.
Microsoft allows a 21 day grace period to complete the migration. I believed the migration was successful so on the 21st day, I followed Microsoft’s instructions and demoted the source server, removing it from the domain.
That’s when the trouble started….
Unknown to me; the public folders remained on the old source server. I did not detect this problem since, during the 21 day migration grace period, the destination server was using the old source server to replicate public folders. As long as the old source server was active, eveyone could open public folder contact lists. After the source server was demoted, the destination server lost its replicate and now our users cannot access that information.
Another problem is that the inactive server is n o longer licensed and the Exchange console cannot connect to its stores.
It would seem to me that this problem should be relatively simple to fix. I need some way to open the public folder stores and export the contact lists. I’m not even sure where the public folder database is located on the hard drive.
I hope this explains the situation in greater detail and that you may be able to offer some insight on how I might resolve this issue.
Oh, I also tried using EXMerge but cannot seem to make it work either. <http://www.microsoft.com/downloads/details.aspx?familyid=429163EC-DCDF-47DC-96DA-1C12D67327D5&displaylang=en>
Thanks!
Bill

Public Folder Migration from Exchange 2007 to Exchage 2007

Dear All,
We are having 2 exchange 2007 server in single copy cluster (SCR) with 1 branch exchange server in parent domain and another Ex2007 single copy cluster in child domain. We have deployed exchange 2013 SP1 in parent domain with ex2007 co-existence. We have
migrated all parent domain users mailbox from Ex2007 to Ex2013 SP1. All Ex2007 have public folders (FP). We want to decommission public folder server in parent domain and want to keep PF only in child domain (Ex2007) which should be accessible by all users.
We are facing a strange issue. As told earlier, in parent domain for ex2007 we have 2 Server in single copy cluster + 1 branch. Both have 1 FP each. We want to remove branch 1st. We ran "MoveAllReplica.ps1" script on branch to move all replica
to single copy cluster. Now it shows system folder with all 0 contents as shown below:
[PS] C:\Windows\system32>Get-PublicFolderStatistics -Server branch
Name                                     ItemCount
LastAccessTime
Default                                  0
7/4/2014 10:58:36 AM
exchangeV1                               0
7/4/2014 10:58:36 AM
microsoft                                0
7/4/2014 10:58:36 AM
schema-root                              0
7/4/2014 10:58:36 AM
StoreEvents{90712A34-233D-4E65-B2FF-23DE 0                 7/4/2014 10:58:36 AM
3C1F6820}
Nntp Control Folder                      0                 10/8/2010 3:22:12
AM
Now the issue is, if we dismount the FP store on branch server, all users are unable to access their FP. they get error saying exchange is down for maintenance. If we see connection status then we saw that its trying to connect branch FP server. In all client
setting we have removed branch server PF folder. What are we missing? Now our users who migrated to Ex2013 don't have any FP client setting also to look into. We tried reading lots of stuff but nothing seems to fix. Any advise is highly appreciated.
Feel free to revert for any clarity!!
Thanks in advance!!

Dear All,
We did little research and below are the results:
1. After moving Mailbox from SingleCopyCluster(SCC) DB to Ex2013, the user while connecting to PF connects to branch exchange PFs (where is his client setting points to SCC PF). He can access PF on SCC as well
2. If we discount branch PF DB, user gets error "Exchange server down for maintenance" while expanding PF. If we see connection status then it shows trying to connecting to Branch PF
3. If we move the mailbox back to old Ex2007 SCC, users connects to right PF (only SCC) and can work without issue even if we discount branch PF DB
As we have migrated MBX to Ex2013, there is no client setting to point migrated users to SCC PF.
Hope it help all of you to suggest what might fix this..
Thanks again..

Public Folder Migration from Exchange 2007 to 2013

Hi Guys,
I have a general Exchange 07-13 migration question about migrating the PF's and System Folder Information, I read somewhere that the SystemFolder info doesn't come across, can someone shed some light on this for me please?
Thanks,
Ray

Hi Ray,
Free/Busy information is stored in system public folder. If you want to decommission the Exchange 2007 Server, you need to add the replicas to Exchange 2013 Server.
What's more, if the users use Outlook 2003, they will rely on the Free/Busy folders. If the users are using Outlook 2007 or newer, then Outlook utilizes something called the Availability Service and no longer relies on the Free/Busy folder.
Please refer to the following article to migrate public folders from Exchange 2007 to Exchange 2013.
Migrate Public Folders to Exchange 2013 From Previous Versions
http://technet.microsoft.com/en-us/library/jj150486.aspx
Besides, here is a helpful thread for your reference.
move/migrate Public Folder from Exchange 2007 to Exchange 2010
http://social.technet.microsoft.com/Forums/exchange/en-US/44b29a93-0149-4734-8e19-6679ad7701ce/movemigrate-public-folder-from-exchange-2007-to-exchange-2010?forum=exchange2010
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Public Folder Migration from Exchange 2007 to 2013 fails RelinquishedWlmStall budget limitations

I have been trying to migrate approx 50 public folders from Exchange 2007 to Exchange 2013 for several months. I have followed every link I can find on how to do the migration properly. It will stay in a queued state for hours until the MRS is
restarted. It will then start copying messages. After reaching 28% I get RelinquishedWlmStall as Status Detail. Running the Get-PublicFolderMigrationRequestStatistics -IncludeReport | fl command I get the following: (truncated)
Status : InProgress
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : ff4af794-f31e-4334-959f-7d6c4ccbe310
RequestQueue : PublicFolders
ExchangeGuid : b12c1f83-c4ae-46bb-a26a-0422d90800e4
Identity : eddf983d-5827-4a2a-98ef-820321ebebd0\ff4af794-f31e-4334-959f-7d6c4ccbe310
DiagnosticInfo :
Report
4/23/2015 8:49:37 AM [pionexxxx] Request processing started.
4/23/2015 8:49:37 AM [pionexxxxx] Cleared sync state for request
00000000-0000-0000-0000-000000000000 due to 'CleanupOrphanedMailbox'.
4/23/2015 8:49:38 AM [pionexxxxxx] Stage: CreatingFolderHierarchy. Percent complete:
10.
4/23/2015 8:49:38 AM [pionexxxxxx] Initializing folder hierarchy from mailbox '': 50
folders total.
4/23/2015 8:49:38 AM [pionexxxx] Folder creation progress: 0 folders created in
mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:38 AM [pionexxxxx] Warning: Failed to find or link recipient object
'FF-D5-EF-1A-0A-95-D7-4B-89-02-A6-9E-DA-4D-23-4B' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes' with EntryId '00-00
00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E
98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-4C-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'D8-46-09-BE-0B-3D-6E-4A-95-10-8F-C5-AA-0B-88-50' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Inventory'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-12-6A-F5-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'A6-12-DA-05-7D-21-DE-44-90-61-64-23-8C-62-41-F4' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Ulysses'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-7C-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'96-76-90-F1-A5-B7-DB-41-A7-A3-D6-8D-86-AE-45-A5' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/CSR Schedule' with EntryId '00-00-00
00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E-98
03-B9-14-4F-B4-12-C1-00-00-00-0E-34-FF-00-00'. This folder can be linked manually
by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'82-72-47-AA-D7-68-85-4C-91-92-41-45-8A-20-EA-6D' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/DC 24 Hr Schedule' with EntryId '00-
0-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-85-62-89-2A-52-C3-92-
5-93-F8-5A-6F-56-5D-D1-D4-00-00-00-00-27-37-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:41 AM [pionexxxx] Folder hierarchy initialized for mailbox
'b12c1f83-c4ae-46bb-a26a-0422d90800e4': 46 folders created.
4/23/2015 8:49:41 AM [pionexxxx] Stage: CreatingInitialSyncCheckpoint. Percent
complete: 15.
4/23/2015 8:49:41 AM [pionexxxx] Initial sync checkpoint progress: 0/50 folders
processed. Currently processing mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:42 AM [pionexxxx] Initial sync checkpoint completed: 46 folders
processed.
4/23/2015 8:49:42 AM [pionexxxx] Stage: LoadingMessages. Percent complete: 20.
4/23/2015 8:49:43 AM [pionexxxx] Messages have been enumerated successfully. 40607
items loaded. Total size: 149 MB (156,253,810 bytes).
4/23/2015 8:49:43 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 25.
4/23/2015 8:49:43 AM [pionexxxx] Copy progress: 0/40607 messages, 0 B (0
bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 28.
4/23/2015 9:04:37 AM [pionexxxxx] Copy progress: 3660/40607 messages, 7.015 MB
(7,355,409 bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
ItemsTransferred : 3660
PercentComplete : 25
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
It never tries to restart. Can anyone please help? The server checks for health all come back ok. I will be more than glad to include further information.

Hi,
Basic on the error message, I notice that public folder migrate slow and display that “Relinquishing job because of large delays due to unfavorable server health or budget limitations” .
If I misunderstand your concern, please do not hesitate to let me know.
Since it is just slow and not failing, please do not stop the batch, it might connect to another server for sync.
Meanwhile, please refer to below link so that get details about Exchange Online migration performance and best practices:
https://technet.microsoft.com/library/dn592150(v=exchg.150).aspx
If the issue persists, please collect the relevant migration report for further troubleshooting.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Public Folder Hierarchy From 2003 - LDAP Provider Error

I am in the process of moving the public folders. Currently all data from within the folders has been migrated over and the old servers have been removed from replication. My next step is to move the Hierarchy, when I drag the folder from the
2003 Administrative group to the 2010 Administrative group I receive the following:
Exchange System Manager
The server is unwilling to process the request.
Facility: LDAP Provider
ID no: 80072035
Exchange System Manager
OK
I have gone through the permissions for the ADSI objects and folders. According to them the user that is performing the action has the rights to do so.

Hi,
In order to troubleshoot the issue more efficiently, I need to clarify some information.
1. Could you expand the public folder hierarchy in Exchange 2003?
2. Is there any error messages in the application log?
3. Could you please run EXBPA to check the health of the Exchange 2003? What's the result?
Here is an article about migrating public folders from Exchange 2003 to Exchange 2010, could you please follow that to check the result?
How to Move Public Folder from Exchange 2003 to Exchange 2010
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
If there is any update, please feel free to post here for further research.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

E2010 Public Folder Store on Exchange 2003...

Gents;
I have added my first Exchange 2010 Public folder to the Exchange 2003-Exchange 2010 setup. I used the '.\AddReplicaToPFRecursive.ps1 ' script to add it.
Toady my users on Exchange 2003 are having trouble seeing new items on those public folders, while the ones in 2010 can see them fine. I know I have a replication issue or at least a timing one.
My question is, can I point my Exchange 2003 mailbox servers to my Exchange 2010 public folders?
Thanks.
Hector
Hector M. Hernandez

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Exchange 2010 Recover Public Folder database from replication database.

Following a hardware failure on Saturday, one of our public folder databases was dismounted, and was corrupt. I was able to run eseutil /p to get to a clean shutdown state, but I still couldn't mount and more research suggested that the logs for the database
were corrupted and unrecoverable (Log file: E:\logs\EXCH-PFDB1\E0100007E16.log
ERROR: Log damaged (unusable). Last Lgpos: (0x7e16,9,0). Error - 501.)
Everything i can find suggests that at the point where it makes the most sense just to restore the database. We do have another public folder database, which is set up to replicate all of its data with the one that went down, so this
should be relatively easy. However I want to make sure that I don't do it wrong and end up deleting my good database. What's the proper procedure for this? I can't seem to find anyone who has documented it.

Thank you Gulab. This worked for me after a drive holding the Public Folder database logs failed. I first replaced the drive and recreated the folder structure. I then ran a Symantec Backup Exec restore job which failed although some
log files did recover. Unfortunately, I could still could not mount the Public Folder Database so I ran
Eseutil /mh which confirmed a dirty shutdown. I then emptied all files from the Log folder which appeared as a result of the restore job and ran Eseutil /p which was successful.
I was then able to mount the Public Folder Database and I could see the contents of the Public Folders in Outlook and the Log folder started to populate from the DAG's second copy.

6 TB of Public Folder Data to move from 2003 to 2010...I need to isolate content replication

I have replicsation working but it is going across the default SMTP connector. I want to isolate Public Folder Content replication so it does not clog up or slow delivery of standard messages. I created a 2nd RG with the source and target servers but content
still appears to go over the first hub server.....any help would be greatly appreciated...
thanks

Hi,
I recommend you increase the cost on the first RG connector to prevent traffic through this connector. Then please check if traffic will go through the second HUB server.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Q10 - Cannot sync Public Folder Calendar from Outlook (Exchange)

Using Blackberry Link - latest update - It lets me browse and choose the public folder calendar but when i sync nothing happens and nothing appears on the phone in calendar. Contacts did update ok so there is connectivity.
This is by usb cable.
This is mandatory for our company to get this working as all Management Calendars are in Exchange Public Folders and always worked in other BB devices until now.
Help!

Hi stack888 and welcome to the BlackBerry Support Community Forums!
Take a look at the following article to see if it helps you with your calendar on your BlackBerry Q10.
KB34383 - Calendar appointments are not displayed on the BlackBerry 10 smartphone after performing s...
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Missing feature at BES 10. Connecting public folder at Microsoft Exchange

Dear Develpment,
one of the different using BB to iOs or Android device was the it was possible to connect to public folder by BES 5.x.
So it was possible to syn your public contact folders of all employee of our company. We must do nothing, if data changed or a new employee added to the public folder.
Now with BES 10 and active sync technology this good feture isnt possible. - Pity.
But maybe in your planning for some next releases it is a way to implement this nice feature...
Blackberry must have some better features than iOS and Andoid.......so you would come back to one top smartphone seller...... I Hope so.
Greetings from Germany
Heinz

Hi,
Please use the Get-PublicFolderStatistics cmdlet to check if you can get public folders on Exchange 2013.
If there is no public folder listed, I recommend you run the Get-PublicFolderMigrationRequestStatistics cmdlet to view detailed information about migration requests.
Best regards,
Belinda Ma
TechNet Community Support
Get-PublicFolderStatistics on the 2013 server fails with "No active public folder mailboxes were found."
Get-PublicFolderMigrationRequestStatistics needs to know more info to run. So I run it as follows:
Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics which gives me:
StatusDetail: StalleDueToMailboxLock
PercentComplete: 95.
This fits with the migration guide because after I reached this point I did the following to assign it to a test user:
Set-Mailbox (name of new PF mailbox) -PublicFolder -IsExcludedFromServingHierarchy $False
Set-Mailbox (name of test user) -DefaultPublicFolderMailbox (name of new PF mailbox)
Jeremy Regehr

Move Mailbox database and Public Folder database from VMwar RDM drive to VMware VMFS/VMDK Drive

Good Afternoon,
So I have 1 DAG with 3 mailbox server (1 physical and 2 Virtual (vmware)). The Vmware server Mailbox and Public folder databases/logs are currently on RDM drive. I need to get rid of the RDM drives and use VMFS/Vmdk drives for mailbox and public
folder databases. I was thinking 3 options:
1- Introduce new VM Members into DAG and simply give these new VMs VMFS/VMDK drives, add servers into DAG and have DAG replicate databases to new server. I really don't want to do this.
2-On current VM, delete RDM drive along with database, add VMFS/VMDK drive replacement and have the DAG copy database.
3- On current VM, suspend replication, copy database/logs in temp location, delete the RDM drive, create the VMFS/VMDK drive, copy the database and logs to new drive, enable replication. Do the same for public folder database/logs, but not sure how
to stop/start replications, since its not in DAG?
I'm looking for solution that will take least amount of time. Option 3 seems best solution, but not sure if there any gotchas.. What are you thought??
Thanks in advance for you help

Take the database offline means stop replications to the the passive mailbox server?
Also, what is procedure to take public folder offline. We have public folder replicated on all 3 servers.
Hi cuttabutta,
Yes, take the database offline on the passive server can stop replication from primary server.
you can also take the public folder database offline to stop replication.
In addition, you can refer to the following article to configure public folder replication:
https://technet.microsoft.com/en-us/library/bb691120(v=exchg.141).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Inter-site replication and KCC, when migrating from 2008 SP1 to 2012 R2

Hello,
We have a very simple AD infrastructure, two sites. I have built out a 2012 R2 server, extended the AD schema and promoted it to a domain controller. Reviewing the existing AD replication topology, we currently have a 2008 SP1 server as a DC
designated as the source/destination for inter-site replication, which appears to have been decided by KCC.
I will be decomming this 2008 SP1 server, having migrated off the FSMO roles to a few other DCs.
Will KCC automatically know to adjust the replication topology when the 2008 SP1 DC is offline? Should I demote it after migrating off the FSMO roles?
Thanks,
Matt

Hi,
Thanks for your post.
By default, the KCC reviews and makes modifications to the Active Directory replication topology every 15 minutes to ensure propagation of data, either directly or transitively, by creating and deleting connection objects as needed. The KCC recognizes
changes that occur in the environment and ensures that domain controllers are not orphaned in the replication topology.
For more detail information, you could refer to:
http://technet.microsoft.com/en-us/library/cc961781.aspx
For the migration, you could transfer the Flexible Single Master Operations (FSMO) Role and remove the Windows 2008 R2 domain controller, please refer to:
Step-By-Step: Active Directory Migration from Windows Server 2008 R2 to Windows Server 2012 R2
http://blogs.technet.com/b/canitpro/archive/2014/05/28/step-by-step-active-directory-migration-from-windows-server-2008-r2-to-windows-server-2012.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Replication of Business Partner Data from ECC to legacy

Hi,
My requirement is to replicate any changes made to Business Partner,should immediately get reflected in the legacy.
Which is the best method to follow.I am planning to use ABAP proxies instead of IDOCS.
As the replication needs to be immediate,Can I use ABAP Proxy.?
And for tigerring this proxy I need to enhance the code for Business Partner(BP) to call the proxy.
Is my approach correct or do I need to follow any other approach.
Regards,
Vinod Kumar.

Hi,
The approach should be based on the kind of data you want to upload in SAP. if you want to upload some standard process documents like Sales order/ purchase order then it will be good to use IDOC. As we have Standard IDOCs available in SAP to upload such document in ECC. In case you want to track the change in data from BP which is not part of any standard process then in that case you can go for ABAP proxy.
If you are using ABAP proxy you dont need to call it from BP. From BP the changes will be sent to PI (in the form of File/database Query/JMS Queues ..etc ). Then PI will call inbound proxy from ECC and post the data.
Please let me know if you have any other Qs.
Shweta.

Problem with public folder initialization on exchange load generator 2010

hi,
we need to make some stress charge for a migration between 2010 and 2013. Before that we need to populate our exchange 2010 lab with full mailbox and public folders. So we tried Exchange load generator 2010 for this task ( initialization only).
Loadgen did well for the mailbox but we have some problems with the public folders. we have an empty public folder database and the user we run loadgen with has organization admin and public folder management right. the problem is that when we run this command
(for initializing public folder only, mailbox's done) :
loadgencmd.exe /p /c config.xml /add trace.log
IT create only one public folder with the user we run loadgen with, and 5-8 objects inside. We need that It create a public folder for each users it created before. Maybe we do not understand loadgen
correctly...

I found my solution :
customize the <PublicStoreProfile> section in the configuration file as follows:
<PublicStoreProfile>
    <MessageFiles />
    <TopLevelFolderCount>1</TopLevelFolderCount>
    <NonTopLevelFolderCount>1</NonTopLevelFolderCount>
    <MinimumFolderDepth>1</MinimumFolderDepth>
    <AverageFolderDepth>2</AverageFolderDepth>
    <MaximumFolderDepth>3</MaximumFolderDepth>
    <MinimumMessageCount>5</MinimumMessageCount>
    <AverageMessageCount>10</AverageMessageCount>
    <MaximumMessageCount>15</MaximumMessageCount>
    <UseOrdinalFolderName>false</UseOrdinalFolderName>
</PublicStoreProfile>
Simply put differents values for each variables.

Replication of Public Folder data from Exchange Sp1 to Exchange SP2

Similar Messages

Maybe you are looking for