Replication of roles from cProject to R/3 PS

Hi
  I want to know the procedure to replicate the roles from the cProjects to project system. If any one know pl help me.
Regards
Nanthu

Hi Zhenbo
I have received the Conf. guide and i have configured as per the guide.
The project definition,phases and tasks are replicated to R/3 PS but if i assign role in the project it is not replicating  to R/3 PS. It is showing the following error
1.R/3 PS Network object could not be created.
2.R/3 PS Error occurred during processing.
Replicated incorrectly
Settings:
Account integration scenario : Replication to R/3 PS using CRM MW
Replication type : From release of project - Automatic
Project Elemt conf: 'Blank'
Please suggest me what should i do to replicate the roles to R/3 PS as activity.
Regards
Nanthu

Similar Messages

  • Role cost from cProject to PS

    Hi,
         I am able integrate cProject with PS. A PS project(WBS) is created when we change the status flag for transfer in cproject. But we not able to find any flow of role cost from cproject to WBS. Can anyone tell me how to achieve this?
                         Thanking you
    regards,
    Ramesh
    muthurameshsap a gmail

    hi Sara,
    You identify frames for cost collector data overview. It specifies which frame from the object type the system should display in the overview display of the accounting data.
    For any object type, you identify frames in Frames per object type in customizing.And each frames will have field assigned to it.
    So in Accounting integration Using cost collector in mySAP ERP customing you define one frame which will direct what data to be displayed in detail screen of that object.
    In your case the fields for both the frames would be same so that you are not able to see any difference.
    I hope I have cleared your doubt.
    Regards,
    Niraj

  • Error while creating project automatically from cProjects

    Hi,
    Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
    1.Combination company / CO area is invalid Message no. KO124
    2.Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    3.Only one error message is transferred from the log to the cockpit
    Message no. IAOM_CPROJECTS029
    I would like to request all to suggest in fixing the issue.
    Thank you for your coopearation.
    Regards,
    Ranjan

    Hi,
    The neccesary configuration for cProjects & SAP-PS interface are as follows.
    1. Project Types in cProjects, Object types, Organisation unit with Org structure in line with project profile
    2. Activate Accounting integration
    3. Object types for object link (WBSE in this case)
    4. Accounting integration using cost collector
    5. Easy cost planing settings both in R/3 systems & cProjects
    6. Project profile configuration in R/3 (cProjects standard)
    7. CO Scenario maintainance view determination (Multi level controlling-Project role, automatic)
    All the enterprise structure assignments should be same in cProjects & R/3.
    Hope this may help you.
    Regards,
    Rakesh Pradhan

  • Replication of Prospects from crm to r\3

    hello Experts
    is there any way to stop the replication of prospects from crm to r/3.....
    we are facing a problem with out validating the prospect the prospects are replicating in r/3...
    can u please help me out in this
    thanks in advance
    regards
    sreeram

    Shweta is right about the PIDE setting in R/3, but this does stop only the update in R/3, not the sending of prospects towards R/3.
    To do it correctly, you need to create new subscriptions for the R/3:
    1. Delete the subscription, publication and replication object on BUPA_MAIN in SMOEAC
    2. Create a new intelligent replication object with filter on IS_CUSTOMER with option EQ (which means you want only customers to be replicated). Alternatively you can create a filter on IS_PROSPECT and option NE
    3. You create the appropriate publication and subscription and assign it to the R/3 site
    Now only BP's with the customer flag will get replicated (or those without the prospect flag). The customer flag will get set usually automatically with the customer role or can be manually set in the classification tab of role customer (field BPISCUST), but the prospect flag will stay if you turn the prospect into a customer.
    So you need to make sure that when setting the BPISCUST flag that the BPISPROS flag is unset, when you do the alternative filtering on IS_PROSPECT (manually or in a BADI on customer save).
    Regards, Kai

  • Creation of WBSE in SAP-PS from all Phase of Project from cProjects

    Hi,
    Need suggestion for the automatic creation of WBSE in SAP-PS from each phase of Projects from cProjects i.e. multi level controlling scenario
    I have done the required configuration of Define Controlling Scenario where for the project type, controlling method has given (Multilevel Controlling (Structure Element, Automatic).
    But in my case only one WBSE is getting created for all phse s & project defintion of project in cProjects.
    Request you to suggest me on this issue.
    Regards,
    Ranjan

    Hi Vetrivel,
    Thanks for your prompt response. These are settings made for multi level controlling scenarios.
    1. Project Type:
    Accounting Intergation-accounting integration in my SAP ERP, as of relese of the project
    2. Define Object Links for Accounting Integration
    - 0FIN_INT_ERP_PS Single-Obj. Controlling on WBS Elements
    - Search Fields OLR3_TS_PRPS_SHLP
    - Proxy Class CL_DPR_OLR3_WBSELEMENT
    - 0FRAME9 frame has considered
    3. Controlling
    - Controlling Scenarios: PS01 Costing Variant
    - Then Costing Model has assigned to Controlling Scenarios
    - Assignment of Cost Elements to Cost / Revenue rate
    Please suggest me if i have missed some things. I am checking the planed cost in CN41 transaction of the PS module. Morever in Project in cProjects costing button is disabled & while doing calculate no planned cost os updating in Projects.
    I am following role based costing process. Project Role has defined & employee assiged to Projects.
    Thank you in advance.
    Regards,
    Ranjan

  • Automatic upload of roles from ECC to portal (UME with LDAP)

    Hi experts,
    This thread reopen the question asked on the following message : automatic upload of roles from BI to portal
    However, it concerns this time "UME with LDAP".
    Problematic :
    SAP Library 04s tells us that is not yet possible to automate role replication (or role assigment replication) from ABAP Based back-end to Netweaver Portal. Only manual process for initial upload is possible.
    Source = http://help.sap.com/saphelp_nw04s/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm
    Questions :
    1 - Did anyone ever try to implement such an automatic tool ?
    2 - What if I'm not able to write on the Active Directory ? I am still able, at least, to automate role assignment replication from ABAP Based back-end to Netweaver Portal (ie. UME with LDAP) ? Directly from SAP R/3 to EP through UME, without passing through Active Directory since the group field is not maintained in AD.
    Many thanks for your inputs
    Alexis MARTIN

    Hello,
    As I did not read the previous thread I don't know what exactly you are trying to achieve, but I can tell you about what we have done - as far as it is not too late yet.
    We use the portal with integration to a BI system. In the ABAP stack we have lots of roles with menu items for hundreds of reports. We want the users to see these roles in the portal.
    First we have used the role migration tool of the portal to upload these roles. There is a Java API for executing role uploads from code. You need to create a webservice in the java stack to call this api, and can call the webservice from ABAP.
    However it is just a question of time and role size until this will not work at all. Standard role migration is more or less crap, stability is a problem. It also creates a lot of logs in the PCD and thus fills the database with trash. (After a few OSS messages there is now a program for deleting logs + you can turn of logging.) Also upload of larger roles takes up to an hour, and you alwasy have the problem that your portal roles are not up to date during the day.
    When I got completely fed up, I have implemented an own navigation connector. When you log on to the portal it will connect to the ABAP stack via RFC, load the role, and generate the portal menu from it. It uses caching, but on every logon it checks whether the role has been updated in ABAP since the last time it was loaded. It is up to date, faster then PCD navigation, and you need absoluetely no periodical synching at all. I cant even understand why this is not offered by SAP per standard!
    Drawback is that it will of course only work for the menu items, and only menu items with an "URL-type" are supported. I'm prettry sure however that it would be possible to implement a few other types as well.
    Let me know if you are interested in the solution, I can give you a few additional details: oliverDOTsvisztATwienerbergerDOTcom
    Oliver

  • SCCM 2012 SP1 | Database Replication Failing on from Child to Parent

    I am having a very urgent issue. The symptom manifested itself as an inability to distribute content (this months software update package) to a secondary site server with DP role. 
    As we dived into it we see that the replication links are dead with "Link has failed". 
    Using the replication link analyzer it fixes it for about 1 hour but then fails again. On a closer look I noticed that replication is working from parent to child but not child to parent. Also check out the time stamps:
    Parent Last Send and Child Recv are both up to date, only Parent Last Recv and Child Last Send are failing. 
    What do I do? 
    None of the logs seem to tell me much other than the statesys.log on both secondaries are pumping the following line over and over again almost to fast for cmtrace to keep up with:
    total chucks loaded (0)
    Oh final thought, we did restore a full offline disk image of the primary server a month ago due to a hardware server failure. The snapshot of the disk luckily was taken only 30 mins before the hardware failure but I suppose there could be something related
    to that although the server seems to have been fine these last few weeks until now.  

    Nothing I can see right now, I started the link up again, ill try to check the log right at the time the link fails this time. Here is a snip of what the child rcmctrl.log looks like:
    DRS sync started. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:43:29 4312 (0x10D8)
    DRS change application started. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:02 4316 (0x10DC)
    Launching 2 sprocs on queue ConfigMgrDRSQueue and 0 sprocs on queue ConfigMgrDRSSiteQueue.
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:02 4316 (0x10DC)
    The asynchronous command finished with return message: [spDRSActivation finished at 11/07/2013 14:43:02. End execute query finished at 11/07/2013 14:43:02.].
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:02 4316 (0x10DC)
    There are 2 Drs Activations sprocs running.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:02
    4316 (0x10DC)
    InvokeRcmMonitor thread wait one more minute for incoming event...
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:10 4324 (0x10E4)
    InvokeRcmConfigure thread wait one more minute for incoming event...
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4320 (0x10E0)
    Wait for inbox notification timed out. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4260 (0x10A4)
    Cleaning the RCM inbox if there are any *.RCM files for further change notifications....
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4260 (0x10A4)
    Initializing RCM. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4260 (0x10A4)
    Processing Replication Configure SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4320 (0x10E0)
    Running configuration EnsureServiceBrokerEnabled.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:11
    4320 (0x10E0)
    Running configuration EnsureServiceBrokerQueuesAreEnabled.
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4320 (0x10E0)
    Processing Replication Monitor SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4324 (0x10E4)
    Summarizing all replication links for monitoring UI.
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4324 (0x10E4)
    Processing replication pattern global_proxy.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:11
    4320 (0x10E0)
    The current site status: ReplicationActive.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:11
    4324 (0x10E4)
    Processing Replication success. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4324 (0x10E4)
    Processing replication pattern procedureForwarder.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:11
    4320 (0x10E0)
    Running configuration ConfigureLinkedServers.
    SMS_REPLICATION_CONFIGURATION_MONITOR 11/07/2013 14:44:11
    4320 (0x10E0)
    Found 1 servers that needs to be linked. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:11 4320 (0x10E0)
    Processing Replication success. SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:12 4320 (0x10E0)
    Rcm control is waiting for file change notification or timeout after 60 seconds.
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:12 4260 (0x10A4)
    Cleaning the RCM inbox if there are any *.RCM files for further change notifications....
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:12 4260 (0x10A4)
    Rcm control is waiting for file change notification or timeout after 60 seconds.
    SMS_REPLICATION_CONFIGURATION_MONITOR
    11/07/2013 14:44:12 4260 (0x10A4)

  • How do get the role from ldap session.

    i am using the follwing getting the role from the request in openldap and j_security_check:
    f(request.isUserInRole("manager")){
    how can i use this in the session:

    You might wanna change permissions for that attribute ...
    Change it from Admin to OWNER and you should be able to then get it for any user ...
    HTH ..

  • How to get the Role from a process

    Hi,
    I have a process where I have different role panes with human intervention activities. Each human intervention invokes a screenflow.
    Is there any method by which I can get the role pane from which an intance is generated
    For e.g. in process P1, I have 3 different role panes i.e. R1, R2, R3. Suppose there is an human intervention activity A3 in R3. It invokes a screenflow in which there are different methods. I want to get the roleId here i.e. R3.
    Through creation data I can know the instance creator i.e. participant ID, but a participant can have more than one role. I want to get the role from which the Human Intervention activity is invoked.
    Please suggest / help.
    Thanks
    Jayant

    Hey Thanks a tonn
    It works fine by the following code
    role = Activity.role
    logMessage "message"
    logMessage "Role: " + role.name
    role.id returns an int, so I used role.name
    Thanks and Regards
    Jayant

  • Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    Hi,
    For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
    I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
    But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
    Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
    BR,
    Mangesh

  • Error while creating projects in SAP-PS from cProjects

    Hi,
    Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
    1.Combination company / CO area is invalid Message no. KO124
    2.Acct assignment determination is not poss.in the account assgnmnt manager
    Message no. IAOM220
    3.Only one error message is transferred from the log to the cockpit
    Message no. IAOM_CPROJECTS029
    I would like to request all to suggest in fixing the issue.
    Thank you for your coopearation.
    Regards,
    Ranjan

    Hi Ranjan,
    If the companay code does not belong to the Co area,  the system will certainly raise an error message. The question is, where do the values come from.
    Woud you please check the customizing in ERP system, if you can find the inconsistence:
    1. Customizing of the Proj.Profile under 'Create Project Profile' , SAP standard delivered is CPR0001, may be replaced by customer,
    Which Co-area & company code are used. In Tab 'organization'
    2. Which responsible Org.unit is maitained at involved cProject, to which co-area or company codes is this org.unit assigned.
    3. If the Badi under the
    Integration with Other mySAP.com Components ->
    Collaboration Projects -> Controlling ->  Business Add-Ins (BAdIs),
    which set the org. information hardly via Badi method.
    Kind regards,
    Zhenbo

  • Error while uploading roles from quality to production

    Dear friends,
    I have to upload roles from quality to production.
    I have downloaded it from qualtiy but while uploading to production it is giving me an error "File does not contain valid data".
    Can anybody tell me what could be the problem and how to resolve it.
    Thanks in advance
    regards
    Nirgun

    HI matore,
    the best way is to transport the roles from DEV to QA and then to production as julius suggested
    are you trying for mass down load are single role
    Mass download
    go to PFCG >> utilities>> Mass download>> select all the roles which you want to move it to production
    and execute save it on desktop
    now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file which is saved in desktop and click ok
    mass generation of roles
    in the menu click on utilities>>mass generation>>give the role names with you have uploaded and click on execute select all click on genetate button
    download a single role
    go to PFCG>>in the menu click on role>>click on down load and save it on desktop
    now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file and click ok
    now you needs to manully generate the role
    do the user comparison
    hope this helps
    thanks
    kishore

  • How to copy a role from one client to another in a system using the CUA?

    Dear all,
    I have a question about transporting roles. We have CUA configured on our SAP system. Our development environment contains several clients. Recently I created a role by using PFCG in the development environment named E1D-100. Later there was a need to affect a user by this role but on another client of the development environment named E1D-200.
    How can I transport a role from a client of the development environment to another client of the same environment.
    While I use SU01 to assign the role, after clicking on "user comparing", I can see that the new created role exists on E1D-100 (the client of the development environment where the role was created), but I see that the role doesn't exist on the other client E1D-200.
    How should I proceed?
    Thanks in advance,
    Dariyoosh

    Hello again,
    Thank you very much for all of your answers. I tried both solutions and both worked pretty well. Thanks a lot for your help.
    Kind Regards,
    Dariyoosh

  • Replication of Users from portal to R/3

    Hi,
    I would like to develop a portal functionnality that allows replication of users from portal to R/3. I know that the functionnality already exists in portal but we need to do another one because of special requirements. How could I find the java code of the existing functionnality to understand how SAP built it?
    Thanks

    Hi,
         You can check the following link
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm">UME</a>
    It will give you an idea of UME Architecture.
    See if it helps you.

  • Upload of BW Roles from BW (2004s)

    Hi
    I am in the process of uploading my roles from BW into the portal.
    I was wondering if we can pre configure the properties that the reports (iviews) inherit as part of the upload.
    For example after the role has been uploaded the property "Launch in New Window" is set as " Display in Portal Content Area".
    We would like this to always default to "Display in Separate Window".
    Can this be be setting be configured to apply to all reports uploaded as part of the role upload procedure.  This removes the need to change each iviews properties after the upload.
    Thanks in advance.
    Ian
    Message was edited by:
            Ian Carbonel

    Hi
    I have made changes to the BEx Web Application Iview however the changes did not appear to transport into my test environment.
    I have found the following documentation relating to the protection of objects during transport.
    http://help.sap.com/saphelp_nw04s/helpdata/en/70/ccc572a094fb4c9b15af909767b924/content.htm
    ·        At export: System objects and content objects with the namespace prefixes com.sap.portals* or com.sap.km* are automatically excluded from the export package and therefore not exported. PAR archives are not usually included in the export.
    ·        At import: If there are content objects with the namespace prefix com.sap.portals* or com.sap.km* in a package, they are automatically excluded from the import.
    Is this the reason?  Is it not possible to change the properties of objects in the namespace com.sap.portals*?
    Thanks in advance

Maybe you are looking for