Replication of Sales Order from SAP ECC to SAP CRM

Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh

1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

Similar Messages

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Customer fields replication in Sales order from R/3 to CRM

Hi all,
I want to replicate, for Sales orders, one field (ZFIELD_A) on item level (VBAP) from R/3 to CRM .
I used transaction EEWB on CRM with the option "Adding new fields to Business transactions" and I flagged checkbox "Also used in R/3".
All worked fine and all the repository objects where created both in CRM and R/3, and the fileds was appended in structure CUSTOMER_I (CRM).
The problem is when I replicate the data, because of existing customer fields in R/3.
In R/3 I have exisiting fields on BAPE_VBAP
ZFIELD_1 [CHAR1] - existing
ZFIELD_2 (CHAR1] - existing
ZFIELD_A [CHAR30] (the new one)
Assuming the above field values are X-Y-thisisatest
the value of ZFIELD_A in CRM will be "XYthisisatest", since R/3 sends, in structure BAPIPAREX all the three Customer fields.
In the generated (from EEWB) method ZEEW_DATAEXCHANGE01->CRM_DATAEXCH_R3D_MBDOC_FILL, called when transferring the order to CRM , all the first 30 positions are moved to ZFIELD_A from CRM.
A solution would be to change the generated coding of the above method, by truncating the first 2 chars, but it's not so nice (and I also could loose the changes after a generation of the EEWB project).
Anyone has a nicer idea?
thanks a lot,
Fabrizio

Hi
Go through the following NOTEs
736595,833585,863611,873771.
Regards
Nadh.

Creating sales order from contract ISA R/3 Edition

Hi Forum,
Our scenario are
1 - customer select product from catalog and place order from internet
2 - sometimes, customer already have a contract with us (created earlier manually on SAP) and want to create sales order from internet referencing a SAP-contract.
For scenario No.1 - we can use standard SAP
For scenario No.2 - is there any standard way to do so? or we have to do customization?
Any suggestion are welcome.
Thanks a million.!!

Hello
"Contract Processing" is not supported out-of-the-box in ISA R/3 edition.
However, you have a good news. The OSS Note [788245 |https://service.sap.com/sap/support/notes/788245]- "ISA R/3 4.0: contract processing", explains how to implement this feature on a project basis.
We have implemented this feature successfully at few customers.
Hope this helps.
Easwar
http://www.parxlns.com

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Error while transferring SALES ORDER from ECC to SCM

Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
<b>Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.</b>
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.Fahrudeen

Hi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Uploading open sales orders from sap

hi all,
i need to upload open sales orders from legacy to sap. pls advice what steps need to be followed for the same.
1) how we will we download open sales order from legacy and where..... is it to some flat file or some other option is there . pls tell some options.
2) how we will uload the sales ordes into sap . thru lsmw or is there some other option ?
3) there will be more number of fields in sap than in legacy. i think we need to manully create an excel file and add more fields manually in excel file so that the compulsonry feilds as per sap are present in sap ?
4) how will availability check happen in sap after sales order are t/f from legacy ?
rgds
pamela

hi pamela,
1.a. you need to down load in EXCEL in legact format and convert the same in LSMW format and upload it
2.a. LSMW - Functionally, BDC, BAPI - Technically. to my knowledge LSMW is better option.
3.a. first you download to EXCEL file from LEGACY, then align the same to SAP format you can add those fields that are mandatory as per your requriment.
4.a.You are uploading sales orders in SAP which are showing OPEN status from LEGACY before you uploading the sales orders MM consultant would have uploaded its stock through 561 - dont worry on that, even though if stock is not uploaded also not an issue it will confirm at the later date.
5.a. we have used LSMW process for our PREVIOUS ASSIGNMENT, before that we tested BAPI for it some how it was not capturing some fields.
hope all your queries are solved
balajia

Migrating Open Sales Order From Legacy System (SAP) To SAP System

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

hi jyothi ,
   there are lot of ways of doing it depending on data upload volume it will be decided .
1) thru abap bdc program which directly uses XL sheet data and creates SO using bapi/FMs.
2) using scat.functional consultant should be good enough to use this.
3)lsmw-laborious procedure but achievable.
reward if helps !!!!!

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Mass sales orders from CRM to ECC

Hi,
We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
Could you please let me know if you know any kind of solution for this kind of scenario.
Thanks in advance!
Regards,
Kumar B.

Hi Maggie,
Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
Could you please let me know how to try this other please let me know the program or tcode.
Regards,
Kumar B

Transfer Sales orders from sap to non sap

Hi,
I want to tranfer the data meaning sales orders from my SAP system to
external system
Has anybody worked on this or any ideas.
Rgds

Hi,
Use orders idoc and IDOC_OUTPUT_ORDERS Function module to sent the sales order data from SAP to other system. Please check you have all the ALE configuration done in your systems.
KR Jaideep,

Urgent : transfer of custom fields of a sales order from ECC to CRM

Hi,
We have a sales order which will be created in CRM and replicated to ECC.
We have added some custom fields in table VBAK, which we are displaying in the sales order additional data tab B. When the user saves the sales order,we need to transfer the fields back to CRM.
We are aware of the the BADI CRM_DATAEXCHG_BADI.
Also i think we need to conisder the structure BAPIMTCS but not sure how exactly we can use it.
On the CRM side these Z fields exist in the structure BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H of the method CRM_DATAEXCH_R3D_MBDOC_FILL.
Can someone guidde us on how exactly do we transfer the value from ECC VBAK-Z* to CRM value BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H.

Hi Sameer,
Thanks for the document.
I tried doing the same steps recommended(in the document it was for a customer). However i dont think my values from the ECC side are being passed to the CRM side.
I created a new Z structure and passed it via BAPIMTCS, but on the CRM side when i tired retrieving my Z structure,i dont think the system found it.
There are 2 BAPITCMS structures, t_table_info and the other t_bapistruc.
Do you know which one we need to fill up?
Thanks,
Neil.

Replication of BP and Sales order from CRM to R/3

Hello everyone,
I have a peculiar condition in my hands.The requirement is to replicate 10 business partners from crm to R/3 ,then the next 4 Business partners need not be replicated and then the next three replicated..How do we do this kind of replication....
One thing more regarding the replication of sales order.When we save a sales order in CRM,is it automatically replicated to R/3 or do we need to release it manually??
If yes,then if we do not want to replicate the sales order from crm to R/3,then what will we do?
Consider that all the middleware settings are configured and working fine..
Puneet

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Create Sales order from Internal Purchase Order using IDOC

Hello Friends,
I have requirement to create Sales Order from Internal Purchase Order Using IDOC.
Backgorund, we have already configured IDOC orders05 to create Sales Order from external Purchase order from Inbound IDOC, and it is working fine.
Now we have new requirement to create Sales Order from our own Purchase order, i.e. When PO is created in one plant corresponidng sales order automatically must needs to create in another Plant with respect PO.
I m trying to design a solution for above problem as follows,
1.create an Inbound Idoc from PO, by creatiing one new message type on PO save.
2.Process that Inbound IDOC same as it is from external PO.
3.Once processed Sales order will create.
Please help me in step 1. to create Inbound IDOC from PO.
If you want any further clarification please write me.
Thanks,
Mahesh

I had done a similar scenario before and we achieved it through SAP XI. The problem is with the control record. When we create a ORDERS IDOC from a PO the control record will be for outbound transmission. We sent the file to XI and XI resent it back with some data parsing and a new inbound control record. This way it went neat outbound and inbound.
I'm not sure what kind of architecture you have. If you have to do it within your ECC/R/3, then you could create the outbound IDOC to a new port and write a fresh RFC to pick it up from the same folder and create a new control record for inbound processing.
I haven't tried this; but there is a "processing w. trigger (inbound)" option on the outbound process code. May be you can explore into that a bit more.
I'm sure there could be better approaches to handle this within ECC so if you stumble on any, do write back. I would like to know to update my knowledge .

Replication of Sales Order from SAP ECC to SAP CRM

Similar Messages

Maybe you are looking for