Replication of Sales order with Credit Card data from CRM to R/3

Hi,
We are on CRM 4.0 version.
We are getting the sales order management system implemented in CRM 4.0.
Simulation for credit card authorization has been set up CRM system.
When we maintain the credit card in the sales order,the replication does not take place.The outbound Queue in the R/3 system is getting stuck with the error 'VBERROR'.
Can you please advice if we can replicate the sales order with the credit card maintained on them to R/3 system.
thanks
Meraj

Hi Bokhal,
Please consider my answer from your recent thread dealing with apparently the same issue :
Hi Bhokal,
For filters in uploads please consider below:
For Filtering the BP-upload, use the Administration Console
(tx. SMOEAC) in the corresponding subscription of the "All Business
Partners (MESG)" publication assigned to the R/3 site.
Some publications (and the replication objects they are based on) are
delivered as type "Simple bulk" which does not give you the opportunity
to assign criteria values for filtering.
You might have to re-create the publication. To do that:
1) First delete the subscriptions "All Business Partners (MESG)" and its
publications & the replication object.
2) Recreate the replication object as type "Simple intelligent".
3) Afterwards you can create a new publication via wizard of type
"Simple intelligent (msg)" assigned to the BDOC-Type BUPA_MAIN. Then,
you will be able to select some "filter criteria".
The reason for deleting the "old" publication is, that you
are not allowed to assign a BDOC-Type to more than one publication.
4) But please keep in mind that there is no realignment supported. So
you should only use fields for filtering, which cannot be changed
afterwards.
This is the "simple" solution for filtering on fields. This
will not provide complex filter criteria.
If you need this, you shall create a filter function in R/3- and/or
CRM-Inbound and -outbound.
If you want to keep the control about the upload trigger, you can add an
additional module in transaction CRMC_BUT_CALL_FU, position > 200000.
BUPA_MWX_BDOC_BPS_FILL_CENTRAL. Within this new module, you can delete
all partners within the complex structure that you don't want to upload.
Hoping that above will be helpful.
Best regards
Christophe Sturzel

Similar Messages

  • Creating Sales Order with credit card using Process Order API

    Hi All,
    When trying to create sales order with payment type as Credit card using Order data storing into staging tables and then calling Order Import Concurrent Program. The order is being created in ENTERED state.
    While trying to passing the same details to Process Order API to create Sales Order, we are getting following error:
    Unable to set up a Credit Card Bank Account for the Customer.
    Credit Card information on the order is not valid.
    Why getting this error while using Process Order API.
    Regards,
    KANN.

    When using the API, are you trying to create the order as booked using the booked flag or the book action?  I would recommend using the action if you are not. To troubleshoot, I would try the API without booking and then use the following article to determine the issue:
    Unable To Setup A Credit Card Bank Account For The Customer. CC Information On The Order Is Not Valid (Doc ID 1450936.1)

  • Sales Orders with credit card information

    Hi everybody
    I wanted to know if it is possible to find if the sales order has a credit card number on it?
    When i go to the Sales order screen, the table-field for credit card# is  CCDATA-CCNUM
    Now CCDATA is a structure, so if i have a Sales Order number and I want to check if there exists a credit card number on that Sales Order, how should it be found ?
    Basically I am trying to modify the billing due list program to list on those Sales Documents which dont have a credit card number on them.
    So from the Delivery document, I drill to the Sales Order number & now I dont know which parameter to check which would guarentee the presence of a credit card number for paying the amount on the Sales Order.
    Kindly if someone could guide me let me know ASAP
    Thanks
    Vinit

    Vinit,
    The field you are looking for is VBAK-RPLNR.  This is the Payment Card Billing Plan number.  This field will only ever have a value in it if there is credit card information on the Sales Order.
    Field VBAK-RPLNR links to fields FPLA-FPLNR, FPLT-FPLNR and FPLTC-FPLNR.  Table FPLTC contains the actual payment card details on the order (or Invoice).
    There is a similar field on the Invoice header - VBRK-RPLNR.
    Eric Bushman
    [Paymetric|https://www.paymetric.com]

  • Creditreport that displays Sales Orders with Material Availability Date as

    Hi
    I need input if the following requirement can be met in FSCM credit mgmnt.
    Currently In FDK43 there is a total sales figure that represents the Sales that are consuming the Credit Limit assigned to the customer, unfortunately there is no drill down on this number to see which sales orders are responsible for the consumption of credit
    Do we have any sales report that displays Sales Orders with Material Availability Date as an output in conjunction with Credit limit .

    Not in standard provided. Custom program is required.
    Regards
    Hein

  • Credit sales order with credit check without top up limit

    Hi Experts,
    I have a silly question, just wanted to confirm is this possible in SAP system?
    I have check thru seem no such function.
    My user requested a requirement is credit sales order with credit limit check however without top up credit limit to specific customer. eventually allow this specific customer sales order, delivery order without blocking and created succesfully?
    Thanks & Regards,
    Yong Kok Wah

    Hi,
    Use a seprate risk category for such customer. In OVA8 Setting for the given risk category set the Credit Limit Seasonal factor.
    By means of above setting system will support the concept of TOP Up credit limit (for a given time period) for given customer against said credit limit.
    Regards
    Digambar Pandey

  • How to list Sales Order with credit block

    Hi, Gurus,
    I really don't know how to list sales orders with credit block?
    Is there any way for end user to do it?
    If so, is it possible to list SO with credit block for certain period of time such as one month?
    Any help would be appreciated.

    HI
    Check T-Code VKM2 (Released documents)
    You need to check VKM1 (Blocked Documents)
    Sorry before i gave wrong information , myself i corrected VKM2 for released not for blocked list (Due to non Availability of SAP access )
    Regards,
    Prasanna
    Edited by: prasanna_sap on Feb 7, 2012 7:12 AM

  • Ican't  Remove My Credit Card Data From My Account

    Please Urgently I TRy Alot to Find Any Way To Remove MY Credit Card Data From Adobe Connect But I Found No Way Please If Any one Have Idea About This Also Its Aouto Deduct the Mony from My Visa It Makes Alot Of Problrem For Me Please Any One Can Find Way I think

    It happens on Mac App Store & iPhone App store as well.
    So clearly the problem is on my Apple ID..
    I've changed my credit card details on my Apple ID but it doesn't reflect onto my phone when I login after restarting the phone. Even if i sign out.
    When it reaches the part where I would need to verify my phone after entering my password. It just keeps requesting for my password and never shows me anything.
    If I click update apps it'll just disable my account. Even on my Mac App store same thing happening.

  • Sales orders with credit issues taking availability stock

    Hi,
    I am doing confirmation using Global ATP in APO. The confirmation is well done, but the confirmed quantity for sales orders with clients that have credit issues is taken the available sotck for other sales orders with ok clients that I want to confirm the quantity they ordered.
    For example:
    Stock: 10 PC
    Client A order 15 PC and 10 are confirmed, but the ordered is retained becuse of credit issues with client A.
    Then client B order 3 PC, but nothing is confirmed because the ordered for client A is reserving the stock (note: this would be ok if client A had not credit issues).
    So, I want that the 3 PC for client B are confirmed and the 10 PC not reserved for the cient A while client A has credit issues.
    How could I configured, so that the orders with credit issues do not reserve stock for the incoming orders?
    Thanks a lot.

    Hi DB49,
    thanks for the quick answer.
    I checked the configuration in the R3 and seems to be fine. To prove it, I disconnect APO and did the availability check in the R3 system and it is working fine; the orders quantities that are blocked because of credit issues, do not reserve stock for incoming orders.........son new incoming orders are well confirmed.
    But after connecting APO the problem continues. I checked the next points.
    In R3 transaction CO09: takes to the APO screen and you see the ATP available quantity OK (do not consider the quantities of the credit issues orders). But at the moment that you make the order (VA01) it does not confirm any stock and if you select the line and go to the ATP screen (the same you get from the CO09) the quantities of credit issues orders are taken into account..the ATP availability quantity changes from the first going directly from the CO09.
    What could it be?
    Note: it was working fine with APO, I started to have the issue after implementing note 1262475 in APO. This note was becuase the BAPI_APOATP_CHECK was not brigning any value for the ATPQTY_***.
    Thanks a lot!!!

  • Creating Sales Order with reference to Quotation from different Sales Area

    Hi,
    I would like to inform you that our customer (GE ENERGY OC) from Europe have a requirement where they want to create sales orders with reference to quotation that is from different sales area. Standard SAP functionality doesn't allow this feature, hence requesting your help to give me an update in this regard.
    Please treat this as urgent as they have to do business cutover where they are in the process of completing open sales orders.
    Thanks
    Ashfaq
    Mobile: +91-98857-07558
    E-Mail: [email protected]

    Hi RadhaKrishna,
    In standard system it is not possible to create sales order from a quotation whose sales are is different.
    However I think this is possible by using some user exit in sales order. I have never tried this.
    Regards
    srini

  • Confirmation qnty in sales order with credit Managment

    Hi    SD Experts very Good Morning ..
    Generally in OVB8-- 101 Requirement and 1 Routine   controls , once customer crossed his credit limit automatically Confirm qnty become zeo and and once we release that document in VKM3 Again confirmed qnty will be active mode for the customer .... this is sap Function  once we removed 101 routine it wont work like this
    But ....
    In this link clearly mentioned in sales order -- Fixed qnty/date one field is there if we activate also system confirms stocks 0 in case credit limit customer crossed his limit
    http://monicaradytia.wordpress.com/2014/02/21/fixed-quantity-and-dates-in-sales-order-document/
    So both functionality is same ... a bit confused sir
    please share your dynamic knowledge
    Thanks a  lot
    venu

    """"""Generally in OVB8-- 101 Requirement and 1 Routine   controls , once customer crossed his credit limit automatically Confirm qnty become zeo and and once we release that document in VKM3 Again confirmed qnty will be active mode for the customer .... this is sap Function  once we removed 101 routine it wont work like this"""""
    The routine which you are suggesting is prerequisite to update MRP.
    (please dont mix this with credit management--that is a different concept all together)
    Fixed date & Qty:
    this indicator you can check at transaction level or at configuration level(by default for your sales area)
    The purpose of this indicator is How to confirm or assure your customer(there by he can assure to his consumer)
    Once you activated this indicator means at transaction level/(or Default for your sales area):
    At customer level:
    You are assuring your customer that you will give the required Goods on this specific date.(here the customer priority is not the Question)
    At Business level:
    After activation of this flag,your MRP will be updated and in case if you are rescheduling all your sales orders--this order will be skipped from others--so MRP department need to plan/Procure/Produce these goods on the specific date mentioned.
    As far as i know these two are completely different in their respective Properties.
    Needless to mention here--whether you are confirming or not ,still you can update MRP by using delivery Blocks concept.
    Phanikumar

  • SAP sales order to credit card carrier query

    Hi
    I am using PI 731 single stack.
    The scenario is -
    SAP sales order is booked and for payment customer picks Credit card payment. Credit card details goes to Bank/credit card carrier and acknowledgement comes in return success debit or fail message to SAP.
    Can we use PI as middleware for it ?
    How PI handles credit card transactions.
    Regards

    When using the API, are you trying to create the order as booked using the booked flag or the book action?  I would recommend using the action if you are not. To troubleshoot, I would try the API without booking and then use the following article to determine the issue:
    Unable To Setup A Credit Card Bank Account For The Customer. CC Information On The Order Is Not Valid (Doc ID 1450936.1)

  • Partial Delivery in Sales Order with Different Delivery Dates

    Dear All,
              In Sales Order we need to specify the different delivery dates for the items ( Partial Delivery ).
    Ex: If I add one sales order for 20 qty of an item today.I need  to specify 5 nums to be delivered on immediately
    and next 10 qty i need delivered on after 15 days and rest of the remaining qty delivered on after another 15 days.
    How we configure in SAP B1 Sales Order.
    Please guide me.
    Thanks in advance.
    - Rajesh

    Enable 'Del Date' in Form Settings of the Delivery.
    In the First Row, select the Item, Qty 5 and type Del Date Immediately
    In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
    In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

  • Delete Credit card history from CRM

    Hi,
    In CRM I want to delete all the Credit card history/details from the system for last 2 years.
    Is there any function module available or how to do this...
    Thanks in advance.
    Regards.

    Hi,
    Write a Z program to delete the entries from FPLT and FPLTC tables.

  • Approved order with payment card - still appears in VKM3

    I have the following scenario in ECC 5.0 -
    1) We enter a sales order with payment card. For some reason, the authorization fails. The order goes on a credit block.
    2) As a result, it appears in VCC1 and VKM3 lists.
    3) Later, if the order is changed and the correct credit card details are entered and it is re-authorized (this time, successfully). The order status gets changed. It is released, delivered and billed.
    However, it continues to appear in the VKM3 list of blocked documents.
    Has anyone encountered similar issues? Please advice.
    Thanks!

    Hi,
    the sales document should not appear anymore in transaction VKM1 or VCC1 after it was authorized (and is not blocked again). If it still appears in VKM1 or VCC1 it is not correct.
    VKM3 shows all document independant from the credit status.
    Best regards, Baerbel

  • COPY CONTROL: SALES ORDER WITH REFERENCE TO QUOTATION

    Hi.
    We are creating a sales orders with reference to a quotation. When copying, we'd like to be able to include another new position type in the sales orders.
    For example:
    QUOTATION:
    POSITION 10: TYPE ZTAB
    SALES ORDERS:
    POSITION 10: TYPE ZTAB
    POSITION 20: TYPE IRSS.
    Where could we place this change?. We suppose when saving the sales orders. Does anybody know how could we make this change?.
    Thank you very much!.
    Raú

    What do you mean by position type?
    Please use the language used by SAP so that it could be easily understood.
    What is ZTAB & IRSS. Are they materials?
    Regarding copying, this is a brief theory
    In copy control, you define control data for the document flow of sales documents.
    You can specify for a particular sales document type, which document type is to be assigned to copied reference documents, and which item categories or schedule line categories are to be copied.
    You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow.
    In precise, you are telling the system what data to copy from QT to sales order. It copies data from Quotation order type to Standard order type basing on settings you indicated in copying control.
    System won't do anything more than copying from preceding documents and it would transfer data based on copying rules in copy control.

Maybe you are looking for